Hi folks,
I got two KDE issues. I changed nothing on the system, maybe its a Problem of a Update.
Nothing happen by clicking the icons on the desktop.
Second thing:
After automaticly logout cause of afk, its not possible to enter password. If i want use the screen keyboard, click on it - > nothing happen.
Is there a solution for these problems?
Thanks!
Welcome to Manjaro!
Please read this:
and post some more information so we can see what’s really going on. Now we know the symptom of the disease, but we need some more probing to know where the origin lies…
An inxi --admin --verbosity=7 --filter --no-host --width would be the minimum required information… (Personally Identifiable Information like serial numbers and MAC addresses will be filtered out by the above command)
P.S. If you enter a bit more details in your profile, we can also see which Desktop Environment you’re using, which CPU/GPU you have, …
hi,
trying to open a app by clicking the desktop icon, this will be logged in journalctl:
Feb 05 21:58:22 Gemini kwin_x11[2009]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 57216, resource id: 14775577, major code: 3 (GetWindowAttributes), minor code: 0
Feb 05 21:58:22 Gemini kwin_x11[2009]: qt.qpa.xcb: QXcbConnection: XCB error: 9 (BadDrawable), sequence: 57217, resource id: 14775577, major code: 14 (GetGeometry), minor code: 0
System:
Kernel: 5.10.7-3-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64
root=**** apparmor=1
security=apparmor udev.log_priority=3
Desktop: KDE Plasma 5.20.5 tk: Qt 5.15.2 wm: kwin_x11 dm: SDDM
Distro: Manjaro Linux
this informations are helpfully? 
greetings from lake constance
Leider nicht… 
- Please provide the full
inxi --admin --verbosity=7 --filter --no-host --width - Please give one specific example of one desktop icon
and then we’ll take it from there.
Entschuldigung!
Okay, danke.
Es betrifft alle Icons auf dem Desktop.
Output of the requested inxi is:
System:
Kernel: 5.10.7-3-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64
root=UUID= rw quiet apparmor=1
security=apparmor udev.log_priority=3
Desktop: KDE Plasma 5.20.5 tk: Qt 5.15.2 wm: kwin_x11 dm: SDDM
Distro: Manjaro Linux
Machine:
Type: Desktop Mobo: ASUSTeK model: ROG STRIX X570-E GAMING v: Rev X.0x
serial: <filter> UEFI: American Megatrends v: 3001 date: 12/04/2020
Memory:
RAM: total: 31.33 GiB used: 4.85 GiB (15.5%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: 8-Core model: AMD Ryzen 7 5800X bits: 64 type: MT MCP arch: Zen 3
family: 19 (25) model-id: 21 (33) stepping: N/A microcode: A201009
L2 cache: 4 MiB bogomips: 121420
Speed: 2195 MHz min/max: 2200/3800 MHz boost: enabled Core speeds (MHz):
1: 2195 2: 2195 3: 2195 4: 2195 5: 2194 6: 2194 7: 2195 8: 2195 9: 2195
10: 2195 11: 2195 12: 2194 13: 2195 14: 2195 15: 2194 16: 2195
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc
cr8_legacy cx16 cx8 de decodeassists erms extapic extd_apicid f16c
flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs
invpcid irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor
movbe msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx ospke osvw
overflow_recov pae pat pausefilter pclmulqdq pdpe1gb perfctr_core
perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt pse pse36 rdpid rdpru
rdrand rdseed rdt_a rdtscp rep_good sep sha_ni skinit smap smca smep ssbd
sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce
topoext tsc tsc_scale umip v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall
vpclmulqdq wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW,
STIBP: always-on, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT]
vendor: Sapphire Limited driver: amdgpu v: kernel bus ID: 0c:00.0
chip ID: 1002:731f
Display: x11 server: X.Org 1.20.10 compositor: kwin_x11 driver:
loaded: amdgpu,ati unloaded: modesetting,radeon alternate: fbdev,vesa
display ID: :0 screens: 1
Screen-1: 0 s-res: 5120x1440 s-dpi: 96 s-size: 1354x381mm (53.3x15.0")
s-diag: 1407mm (55.4")
Monitor-1: HDMI-A-0 res: 2560x1440 dpi: 109 size: 597x336mm (23.5x13.2")
diag: 685mm (27")
Monitor-2: HDMI-A-1 res: 2560x1440 dpi: 109 size: 597x336mm (23.5x13.2")
diag: 685mm (27")
OpenGL: renderer: AMD Radeon RX 5700 XT (NAVI10 DRM 3.40.0 5.10.7-3-MANJARO
LLVM 11.0.1)
v: 4.6 Mesa 20.3.3 direct render: Yes
Audio:
Device-1: AMD Navi 10 HDMI Audio driver: snd_hda_intel v: kernel
bus ID: 0c:00.1 chip ID: 1002:ab38
Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus ID: 0e:00.4 chip ID: 1022:1487
Device-3: Plantronics RIG 800HD type: USB
driver: plantronics,snd-usb-audio,usbhid bus ID: 5-4:2 chip ID: 047f:c043
Device-4: Microsoft Microsoft LifeCam Studio type: USB
driver: hid-generic,snd-usb-audio,usbhid,uvcvideo bus ID: 1-4.2:7
chip ID: 045e:0811
Sound Server: ALSA v: k5.10.7-3-MANJARO
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel bus ID: 04:00.0
chip ID: 8086:2723
IF: wlp4s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
Device-2: Realtek RTL8125 2.5GbE vendor: ASUSTeK driver: r8169 v: kernel
port: e000 bus ID: 05:00.0 chip ID: 10ec:8125
IF: enp5s0 state: down mac: <filter>
Device-3: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel
port: d000 bus ID: 06:00.0 chip ID: 8086:1539
IF: enp6s0 state: down mac: <filter>
WAN IP: <filter>
RAID:
Message: No RAID data was found.
Drives:
Local Storage: total: 12.28 TiB used: 2.42 TiB (19.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 PRO 500GB
size: 465.76 GiB block size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 serial: <filter> rev: 1B2QGXA7 temp: 43.9 C
ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST6000VN0033-2EE110
size: 5.46 TiB block size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
serial: <filter> rev: SC60
ID-3: /dev/sdb maj-min: 8:16 vendor: Samsung model: SSD 860 EVO 500GB
size: 465.76 GiB block size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
serial: <filter> rev: 1B6Q
ID-4: /dev/sdc maj-min: 8:32 vendor: Samsung model: SSD 860 EVO 500GB
size: 465.76 GiB block size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
serial: <filter> rev: 1B6Q
ID-5: /dev/sdd maj-min: 8:48 vendor: Seagate model: ST6000VN0033-2EE110
size: 5.46 TiB block size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
serial: <filter> rev: SC60
Message: No Optical or Floppy data was found.
Partition:
ID-1: / raw size: 465.46 GiB size: 457.16 GiB (98.22%)
used: 57.24 GiB (12.5%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2
label: N/A uuid:
ID-2: /boot/efi raw size: 300 MiB size: 299.4 MiB (99.80%)
used: 312 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: N/A
uuid:
ID-3: /run/media/timo/Volume raw size: 5.46 TiB size: 5.46 TiB (100.00%)
used: 2.36 TiB (43.2%) fs: ntfs dev: /dev/sdd2 maj-min: 8:50 label: Volume
uuid:
Swap:
Alert: No Swap data was found.
Unmounted:
ID-1: /dev/sda1 maj-min: 8:1 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-2: /dev/sda2 maj-min: 8:2 size: 5.46 TiB fs: ntfs label: Volume
uuid:
ID-3: /dev/sdb1 maj-min: 8:17 size: 128 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-4: /dev/sdb2 maj-min: 8:18 size: 499 MiB fs: ntfs label: N/A
uuid:
ID-5: /dev/sdb3 maj-min: 8:19 size: 99 MiB fs: vfat label: N/A
uuid:
ID-6: /dev/sdb4 maj-min: 8:20 size: 465.05 GiB fs: ntfs label: N/A
uuid:
ID-7: /dev/sdc1 maj-min: 8:33 size: 465.76 GiB fs: ntfs label: Volume
uuid:
ID-8: /dev/sdd1 maj-min: 8:49 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002
Device-1: 1-3:2 info: Holtek USB Gaming Mouse type: Keyboard,Mouse,HID
driver: holtek_mouse,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s
chip ID: 04d9:a067
Hub-2: 1-4:3 info: Realtek RTS5411 Hub ports: 4 rev: 2.1 speed: 480 Mb/s
chip ID: 0bda:5411
Device-1: 1-4.1:5 info: Cherry Mechanical Keyboard type: Keyboard,HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s
chip ID: 046a:00b0
Device-2: 1-4.2:7 info: Microsoft Microsoft LifeCam Studio
type: Video,Audio,HID driver: hid-generic,snd-usb-audio,usbhid,uvcvideo
interfaces: 5 rev: 2.0 speed: 480 Mb/s chip ID: 045e:0811
Device-3: 1-4.3:8 info: Wacom PTH-660 [Intuos Pro (M)] type: HID
driver: usbhid,wacom interfaces: 3 rev: 2.0 speed: 12 Mb/s
chip ID: 056a:0357 serial: <filter>
Hub-3: 1-4.4:9 info: Realtek RTS5411 Hub ports: 4 rev: 2.1 speed: 480 Mb/s
chip ID: 0bda:5411
Device-1: 1-4.4.4:10 info: HP HP Officejet Pro 8620 type: <vendor specific>
driver: usb-storage,usblp interfaces: 5 rev: 2.0 speed: 480 Mb/s
chip ID: 03f0:7012 serial: <filter>
Hub-4: 1-5:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
chip ID: 05e3:0610
Device-1: 1-6:6 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 8087:0029
Hub-5: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip ID: 1d6b:0003
Hub-6: 2-4:2 info: Realtek Hub ports: 4 rev: 3.1 speed: 5 Gb/s
chip ID: 0bda:0411
Hub-7: 2-4.4:3 info: Realtek Hub ports: 4 rev: 3.1 speed: 5 Gb/s
chip ID: 0bda:0411
Hub-8: 3-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002
Device-1: 3-4:2 info: ASUSTek AURA LED Controller type: <vendor specific>
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s
chip ID: 0b05:18f3 serial: <filter>
Device-2: 3-5:3 info: NZXT USB Device type: HID driver: hid-generic,usbhid
interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 1e71:2007 serial: <filter>
Hub-9: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip ID: 1d6b:0003
Hub-10: 5-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002
Device-1: 5-4:2 info: Plantronics RIG 800HD type: Audio,HID
driver: plantronics,snd-usb-audio,usbhid interfaces: 4 rev: 2.0
speed: 12 Mb/s chip ID: 047f:c043
Hub-11: 6-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1
speed: 10 Gb/s chip ID: 1d6b:0003
Sensors:
System Temperatures: cpu: 39.8 C mobo: N/A gpu: amdgpu temp: 47.0 C
mem: 50.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 0
Info:
Processes: 378 Uptime: 1h 54m wakeups: 4 Init: systemd v: 247 Compilers:
gcc: 10.2.0 Packages: pacman: 1312 lib: 406 flatpak: 0 Shell: Bash v: 5.1.0
running in: yakuake inxi: 3.2.02
-
In the future, when providing code/output, please copy-paste that output in-between 3 backticks ``` at the beginning and end of the code/text so that the output looks like this:
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.instead of like this:
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.
(as that makes both our lives much easier)
-
Standard, there are no icons on the desktop, so I need one very specific example to see what’s going on…
-
What do you mean by this? That the first login works, but after you log out of the desktop, you cannot log in any more?
- Thunderbird, Kate, Moneyplex
- yes, nothing happen if i try entering the password.
-
what’s the output of:
cat ~/Desktop/*hunder*if:
cat: '/home/schwenk/Desktop/*hunder*': No such file or directory(or just a bunch of garbage with a beep every now and then),
what’s the output of:ls -al ~/Desktop/*hunder* -
What happens if you then go to TTY2 by pressing Ctrl+Alt+F2.
Can you still log in there?
cat: ‘/home/schwenk/Desktop/hunder’: Datei oder Verzeichnis nicht gefunden
ls: Zugriff auf ‘/home/schwenk/Desktop/hunder’ nicht möglich: Datei oder Verzeichnis nicht gefunden
Yes
-
ls -al ~/Desktop/
-
After you log in there, what’s the output of:
sudo dmesg | tail --lines=50