Hi,
Running “Manjaro KDE 64Bit” fully updated.
The desktop runs 100% perfectly.
When I reboot or shutdown the desktop it takes over a minute?
Not sure how to fix this issue?
Perhaps is issue with SSD - how would I run a disk check on an SSD where the OS is?
NOTE #1: System SSD is encrypted
Let me know, thanks!
Jesse
[jlp@SortaFastDesktop ~]$ inxi -F
System:
Host: SortaFastDesktop Kernel: 5.11.14-1-MANJARO x86_64 bits: 64
Desktop: KDE Plasma 5.21.4 Distro: Manjaro Linux
Machine:
Type: Desktop Mobo: Gigabyte model: B85M-HD3 v: x.x serial: <superuser required>
BIOS: American Megatrends v: F12 date: 08/13/2015
CPU:
Info: Quad Core model: Intel Core i5-4430 bits: 64 type: MCP cache: L2: 6 MiB
Speed: 2098 MHz min/max: 800/3200 MHz Core speeds (MHz): 1: 2098 2: 1588 3: 2566
4: 2081
Graphics:
Device-1: NVIDIA GP107 [GeForce GTX 1050 Ti] driver: nvidia v: 460.67
Display: x11 server: X.Org 1.20.11 driver: loaded: nvidia
resolution: 1920x1080~60Hz
OpenGL: renderer: GeForce GTX 1050 Ti/PCIe/SSE2 v: 4.6.0 NVIDIA 460.67
Audio:
Device-1: Intel 8 Series/C220 Series High Definition Audio driver: snd_hda_intel
Device-2: NVIDIA GP107GL High Definition Audio driver: snd_hda_intel
Sound Server-1: ALSA v: k5.11.14-1-MANJARO running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169
IF: enp3s0 state: down mac: 74:d4:35:9b:58:fd
Device-2: Intel 82541PI Gigabit Ethernet driver: e1000
IF: enp5s0 state: up speed: 1000 Mbps duplex: full mac: 90:e2:ba:68:f9:0e
Device-3: Intel Centrino Ultimate-N 6300 driver: iwlwifi
IF: wlp6s0 state: down mac: 7e:4a:a1:dd:e6:c2
IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A
Bluetooth:
Device-1: Broadcom BCM20702A0 Bluetooth 4.0 type: USB driver: btusb
Report: rfkill ID: hci0 state: up address: see --recommends
Drives:
Local Storage: total: 1.84 TiB used: 174.79 GiB (9.3%)
ID-1: /dev/sda vendor: A-Data model: SU800 size: 953.87 GiB
ID-2: /dev/sdb vendor: Western Digital model: WD10EARX-32N0YB0 size: 931.51 GiB
Partition:
ID-1: / size: 937.89 GiB used: 174.79 GiB (18.6%) fs: ext4 dev: /dev/dm-0
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 29.8 C mobo: 27.8 C gpu: nvidia temp: 35 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 30%
Info:
Processes: 248 Uptime: 1h 33m Memory: 15.59 GiB used: 5.02 GiB (32.2%) Shell: Bash
inxi: 3.3.04
[jlp@SortaFastDesktop ~]$
Fabby
20 April 2021 18:00
2
Did you create a mirror on the SSD and HDD?
If not, post the output of:
inxi --admin --verbosity=7 --filter --no-host --width
parted --list
Hi,
Thanks for the response!
No, I did not create a mirror on the SSD and HDD.
(SSD is OS and apps / HDD is personal data)
Requested info is below:
Thanks!
Jesse
[jlp@SortaFastDesktop ~]$ inxi --admin --verbosity=7 --filter --no-host --width
parted --list
System:
Kernel: 5.11.14-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.11-x86_64
root=UUID=f360282e-91b5-4661-b13f-681fdd0767cc ro quiet
cryptdevice=UUID=075cfc6a-42b7-4126-aa11-30473e9f5346:luks-075cfc6a-42b7-4126-aa11-30473e9f5346
root=/dev/mapper/luks-075cfc6a-42b7-4126-aa11-30473e9f5346 apparmor=1
security=apparmor udev.log_priority=3
Desktop: KDE Plasma 5.21.4 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop Mobo: Gigabyte model: B85M-HD3 v: x.x serial: <filter>
BIOS: American Megatrends v: F12 date: 08/13/2015
Battery:
Message: No system battery data found. Is one present?
Memory:
RAM: total: 15.59 GiB used: 5.59 GiB (35.9%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: Quad Core model: Intel Core i5-4430 bits: 64 type: MCP arch: Haswell
family: 6 model-id: 3C (60) stepping: 3 microcode: 28 cache: L2: 6 MiB
bogomips: 23952
Speed: 3093 MHz min/max: 800/3200 MHz Core speeds (MHz): 1: 3093 2: 3062
3: 3088 4: 3092
Flags: abm acpi aes aperfmperf apic arat arch_perfmon avx avx2 bmi1 bmi2 bts
clflush cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm
dts ept ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht
ibpb ibrs ida invpcid invpcid_single lahf_lm lm mca mce md_clear mmx monitor
movbe msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb
pebs pge pln pni popcnt pse pse36 pti pts rdrand rdtscp rep_good sdbg sep
smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow
tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic xsave xsaveopt
xtopology xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: disabled, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GP107 [GeForce GTX 1050 Ti] vendor: eVga.com.
driver: nvidia v: 460.67 alternate: nouveau,nvidia_drm bus-ID: 01:00.0
chip-ID: 10de:1c82 class-ID: 0300
Display: x11 server: X.Org 1.20.11 compositor: kwin_x11 driver:
loaded: nvidia display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 92 s-size: 530x301mm (20.9x11.9")
s-diag: 610mm (24")
Monitor-1: DVI-D-0 res: 1920x1080 hz: 60 dpi: 93
size: 527x296mm (20.7x11.7") diag: 604mm (23.8")
OpenGL: renderer: GeForce GTX 1050 Ti/PCIe/SSE2 v: 4.6.0 NVIDIA 460.67
direct render: Yes
Audio:
Device-1: Intel 8 Series/C220 Series High Definition Audio vendor: Gigabyte
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:8c20
class-ID: 0403
Device-2: NVIDIA GP107GL High Definition Audio vendor: eVga.com.
driver: snd_hda_intel v: kernel bus-ID: 01:00.1 chip-ID: 10de:0fb9
class-ID: 0403
Sound Server-1: ALSA v: k5.11.14-1-MANJARO running: yes
Sound Server-2: JACK v: 0.125.0 running: no
Sound Server-3: PulseAudio v: 14.2 running: yes
Sound Server-4: PipeWire v: 0.3.25 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Gigabyte driver: r8169 v: kernel port: d000 bus-ID: 03:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: enp3s0 state: down mac: <filter>
Device-2: Intel 82541PI Gigabit Ethernet driver: e1000 v: kernel port: c000
bus-ID: 05:00.0 chip-ID: 8086:107c class-ID: 0200
IF: enp5s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
Device-3: Intel Centrino Ultimate-N 6300 driver: iwlwifi v: kernel
port: c000 bus-ID: 06:00.0 chip-ID: 8086:422b class-ID: 0280
IF: wlp6s0 state: down mac: <filter>
IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A
IP v4: <filter> type: noprefixroute scope: global
IP v6: <filter> virtual: stable-privacy scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Broadcom BCM20702A0 Bluetooth 4.0 type: USB driver: btusb v: 0.8
bus-ID: 3-5:2 chip-ID: 0a5c:21e8 class-ID: fe01 serial: <filter>
Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
Message: No logical block device data found.
Device-1: luks-075cfc6a-42b7-4126-aa11-30473e9f5346 maj-min: 254:0
type: LUKS dm: dm-0 size: 953.86 GiB
Components:
p-1: sda1 maj-min: 8:1 size: 953.86 GiB
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 1.84 TiB used: 177.67 GiB (9.4%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: A-Data model: SU800 size: 953.87 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s rotation: SSD
serial: <filter> rev: 2FS scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital model: WD10EARX-32N0YB0
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
serial: <filter> rev: AB51 scheme: MBR
Optical-1: /dev/sr0 vendor: ATAPI model: iHAS124 D rev: 8L07
dev-links: cdrom
Features: speed: 48 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
ID-1: / raw-size: 953.86 GiB size: 937.89 GiB (98.33%)
used: 177.67 GiB (18.9%) fs: ext4 dev: /dev/dm-0 maj-min: 254:0
mapped: luks-075cfc6a-42b7-4126-aa11-30473e9f5346 label: N/A
uuid: f360282e-91b5-4661-b13f-681fdd0767cc
Swap:
Alert: No swap data was found.
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip-ID: 8087:8008 class-ID: 0900
Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip-ID: 8087:8000 class-ID: 0900
Hub-5: 3-0:1 info: Full speed (or root) Hub ports: 12 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-5:2 info: Broadcom BCM20702A0 Bluetooth 4.0 type: Bluetooth
driver: btusb interfaces: 4 rev: 2.0 speed: 12 Mb/s chip-ID: 0a5c:21e8
class-ID: fe01 serial: <filter>
Hub-6: 3-8:3 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s
power: 100mA chip-ID: 1a40:0101 class-ID: 0900
Device-1: 3-8.4:5 info: Realtek Mass Storage Device (Multicard Reader)
type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0
speed: 480 Mb/s power: 500mA chip-ID: 0bda:0151 class-ID: 0806
serial: <filter>
Hub-7: 3-9:4 info: Terminus Hub ports: 4 rev: 2.0 speed: 12 Mb/s
power: 100mA chip-ID: 1a40:0101 class-ID: 0900
Device-1: 3-9.1:7 info: HP OfficeJet 3830 series type: Printer driver: usblp
interfaces: 4 rev: 2.0 speed: 12 Mb/s power: 2mA chip-ID: 03f0:e511
class-ID: 0701 serial: <filter>
Hub-8: 3-9.3:9 info: Terminus Hub ports: 4 rev: 2.0 speed: 12 Mb/s
power: 100mA chip-ID: 1a40:0101 class-ID: 0900
Device-1: 3-9.3.3:11
info: Prototype product Vendor ID SmartJoy Dual Plus PS2 converter type: HID
driver: smartjoyplus,usbhid interfaces: 1 rev: 1.0 speed: 1.5 Mb/s
power: 100mA chip-ID: 6666:8802 class-ID: 0300
Device-2: 3-11:6 info: Sunplus Innovation Gaming mouse [Philips SPK9304]
type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0
speed: 1.5 Mb/s power: 98mA chip-ID: 1bcf:08a0 class-ID: 0301
Hub-9: 3-12:8 info: Dell Keyboard Hub ports: 3 rev: 1.1 speed: 12 Mb/s
power: 100mA chip-ID: 413c:1003 class-ID: 0900
Device-1: 3-12.1:10 info: Dell Keyboard type: Keyboard,HID
driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 50mA
chip-ID: 413c:2010 class-ID: 0300
Hub-10: 4-0:1 info: Full speed (or root) Hub ports: 6 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 29.8 C mobo: 27.8 C gpu: nvidia temp: 34 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 30%
Info:
Processes: 269 Uptime: 6h 47m wakeups: 0 Init: systemd v: 247
tool: systemctl Compilers: gcc: 10.2.0 Packages: pacman: 1442 lib: 430
flatpak: 0 Shell: Bash v: 5.1.0 running-in: konsole inxi: 3.3.04
/dev/mapper/control: open failed: Permission denied
Failure to communicate with kernel device-mapper driver.
Incompatible libdevmapper 1.02.175 (2021-01-08) and kernel driver (unknown version).
[jlp@SortaFastDesktop ~]$
[jlp@SortaFastDesktop ~]$ sudo parted --list
Model: ATA ADATA SU800 (scsi)
Disk /dev/sda: 1024GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 1024GB 1024GB primary boot
Model: ATA WDC WD10EARX-32N (scsi)
Disk /dev/sdb: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 1000GB 1000GB primary
[jlp@SortaFastDesktop ~]$ last -Fx shutdown reboot | head
reboot system boot 5.11.14-1-MANJAR Tue Apr 20 18:13:22 2021 still running
shutdown system down 5.11.14-1-MANJAR Tue Apr 20 18:12:32 2021 - Tue Apr 20 18:13:22 20
21 (00:00)
reboot system boot 5.11.14-1-MANJAR Tue Apr 20 18:12:21 2021 - Tue Apr 20 18:12:32 20
21 (00:00)
shutdown system down 5.11.14-1-MANJAR Tue Apr 20 18:11:31 2021 - Tue Apr 20 18:12:21 20
21 (00:00)
reboot system boot 5.11.14-1-MANJAR Tue Apr 20 09:51:21 2021 - Tue Apr 20 18:11:31 20
21 (08:20)
shutdown system down 5.11.14-1-MANJAR Tue Apr 20 09:50:29 2021 - Tue Apr 20 09:51:21 20
21 (00:00)
reboot system boot 5.11.14-1-MANJAR Mon Apr 19 10:08:11 2021 - Tue Apr 20 09:50:29 20
21 (23:42)
shutdown system down 5.11.14-1-MANJAR Mon Apr 19 10:07:22 2021 - Mon Apr 19 10:08:11 20
21 (00:00)
reboot system boot 5.11.14-1-MANJAR Mon Apr 19 10:05:13 2021 - Mon Apr 19 10:07:22 20
21 (00:02)
shutdown system down 5.11.14-1-MANJAR Mon Apr 19 10:03:45 2021 - Mon Apr 19 10:05:13 20
21 (00:01)
[jlp@SortaFastDesktop ~]$
Fabby
21 April 2021 07:45
6
The last -Fx shutdown reboot | head
shows:
And that’s just 11 seconds for a full system reboot? That’s not bad…
Where is the problem?
Hmmm…Odd…
Was taking over 45 seconds to fully reboot or shutdown.
Guess it is ok now
Jesse
To see if this is related to another KDE bug (which has been fixed upstream!), when you get the chance, try this:
Log into Plasma
Log out soon after
Log back in
Repeat steps 2 and 3 several times. Does it at any point “stall” or seem to “hang”, and maybe take around 3 minutes to finally log back in?
Fabby
26 April 2021 08:41
9
system
Closed
11 May 2021 08:41
10
This topic was automatically closed 15 days after the last reply. New replies are no longer allowed.