Issues with Plasma GUI Freezes several times a day

I been using Manjaro for over 6 months now, however recently I been facing an issue with it freezing multiple times a day requiring me to RESUIB it.

here is my system output
i think the issue might be related to my GPU drivers, I been following several tutorials but might be that I have very specific issue (have an APU and a GPU on the same sistem, I only use the GPU) but don’t want to jump into conclusion, any help or feedback will be highly appreciated.

System:
  Kernel: 5.15.19-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-5.15-x86_64
    root=UUID=1f5997db-2064-476c-93dc-539f29aaa3e1 rw rootflags=subvol=@ quiet
    apparmor=1 security=apparmor udev.log_priority=3 sysrq_always_enabled=1
  Console: pty pts/2 wm: kwin_x11 DM: SDDM Distro: Manjaro Linux
    base: Arch Linux
Machine:
  Type: Desktop System: ASUS product: N/A v: N/A serial: N/A
  Mobo: ASUSTeK model: TUF GAMING B550-PLUS (WI-FI) v: Rev X.0x
    serial: <filter> UEFI: American Megatrends v: 2407 date: 07/13/2021
Battery:
  Device-1: hidpp_battery_0 model: Logitech Wireless Mouse MX Master 2S
    serial: <filter> charge: 100% (should be ignored) rechargeable: yes
    status: Discharging
Memory:
  RAM: total: 62.66 GiB used: 4.86 GiB (7.7%)
  Array-1: capacity: 128 GiB slots: 4 EC: None max-module-size: 32 GiB
    note: est.
  Device-1: DIMM_A1 size: No Module Installed
  Device-2: DIMM_A2 size: 32 GiB speed: 3200 MT/s type: DDR4
    detail: synchronous unbuffered (unregistered) bus-width: 64 bits
    total: 64 bits manufacturer: Kingston part-no: KF3200C16D4/32GX
    serial: <filter>
  Device-3: DIMM_B1 size: No Module Installed
  Device-4: DIMM_B2 size: 32 GiB speed: 3200 MT/s type: DDR4
    detail: synchronous unbuffered (unregistered) bus-width: 64 bits
    total: 64 bits manufacturer: Kingston part-no: KHX3200C16D4/32GX
    serial: <filter>
CPU:
  Info: model: AMD Ryzen 7 5700G with Radeon Graphics socket: AM4 bits: 64
    type: MT MCP arch: Zen 3 family: 0x19 (25) model-id: 0x50 (80) stepping: 0
    microcode: 0xA50000C
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
    L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB
    L3: 16 MiB desc: 1x16 MiB
  Speed (MHz): avg: 1850 high: 3800 min/max: 1400/4672 boost: enabled
    base/boost: 3800/4650 scaling: driver: acpi-cpufreq governor: schedutil
    volts: 1.4 V ext-clock: 100 MHz cores: 1: 1400 2: 1400 3: 1400 4: 1400
    5: 1400 6: 1400 7: 3800 8: 3800 9: 3800 10: 1400 11: 1400 12: 1400
    13: 1400 14: 1400 15: 1400 16: 1400 bogomips: 121649
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
    bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
    constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
    cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists erms extapic
    extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht
    hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
    misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
    nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
    pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt
    pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
    skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor
    svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl
    v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt
    xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl and seccomp
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional,
    IBRS_FW, STIBP: always-on, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA GP107GL [Quadro P400] driver: nvidia v: 510.47.03
    alternate: nouveau,nvidia_drm bus-ID: 01:00.0 chip-ID: 10de:1cb3
    class-ID: 0300
  Device-2: Realtek RTL2838 DVB-T type: USB driver: dvb_usb_rtl28xxu
    bus-ID: 3-2:2 chip-ID: 0bda:2838 class-ID: 0000 serial: <filter>
  Device-3: Microsoft LifeCam HD-3000 type: USB
    driver: snd-usb-audio,uvcvideo bus-ID: 5-2:3 chip-ID: 045e:0810
    class-ID: 0102
  Display: server: X.Org 1.21.1.3 compositor: kwin_x11 driver:
    loaded: nvidia unloaded: modesetting,nouveau alternate: fbdev,nv,vesa
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 5120x2340 s-dpi: 107 s-size: 1216x555mm (47.9x21.9")
    s-diag: 1337mm (52.6")
  Monitor-1: DP-0 res: 2560x1440 hz: 75 dpi: 109
    size: 597x336mm (23.5x13.2") diag: 685mm (27")
  Monitor-2: DP-2 res: 2560x1440 hz: 75 dpi: 109
    size: 597x336mm (23.5x13.2") diag: 685mm (27")
  Monitor-3: DP-5 res: 1600x900 hz: 60 dpi: 92 size: 443x249mm (17.4x9.8")
    diag: 508mm (20")
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: NVIDIA GP107GL High Definition Audio driver: snd_hda_intel
    v: kernel bus-ID: 01:00.1 chip-ID: 10de:0fb9 class-ID: 0403
  Device-2: AMD Renoir Radeon High Definition Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel bus-ID: 08:00.1 chip-ID: 1002:1637
    class-ID: 0403
  Device-3: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel
    v: kernel bus-ID: 08:00.6 chip-ID: 1022:15e3 class-ID: 0403
  Device-4: Microsoft LifeCam HD-3000 type: USB
    driver: snd-usb-audio,uvcvideo bus-ID: 5-2:3 chip-ID: 045e:0810
    class-ID: 0102
  Sound Server-1: ALSA v: k5.15.19-1-MANJARO running: yes
  Sound Server-2: sndio v: N/A running: no
  Sound Server-3: JACK v: 1.9.20 running: no
  Sound Server-4: PulseAudio v: 15.0 running: yes
  Sound Server-5: PipeWire v: 0.3.45 running: yes
Network:
  Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel bus-ID: 05:00.0
    chip-ID: 8086:2723 class-ID: 0280
  IF: wlp5s0 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  Device-2: Realtek RTL8125 2.5GbE vendor: ASUSTeK driver: r8169 v: kernel
    port: e000 bus-ID: 06:00.0 chip-ID: 10ec:8125 class-ID: 0200
  IF: enp6s0 state: down mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-5:2
    chip-ID: 8087:0029 class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 581.45 GiB used: 82.82 GiB (14.2%)
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 PRO 500GB
    size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
    lanes: 4 type: SSD serial: <filter> rev: 1B2QGXA7 temp: 34.9 C scheme: GPT
  SMART: yes health: PASSED on: 6d 4h cycles: 455
    read-units: 24,530,968 [12.5 TB] written-units: 45,210,512 [23.1 TB]
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Ultra
    size: 115.69 GiB block-size: physical: 512 B logical: 512 B type: N/A
    serial: <filter> rev: 1.00 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
    used: 82.82 GiB (17.8%) fs: btrfs block-size: 4096 B dev: /dev/nvme0n1p2
    maj-min: 259:2 label: N/A uuid: 1f5997db-2064-476c-93dc-539f29aaa3e1
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 568 KiB (0.2%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
    maj-min: 259:1 label: NO_LABEL uuid: 6E15-E3BA
  ID-3: /home raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
    used: 82.82 GiB (17.8%) fs: btrfs block-size: 4096 B dev: /dev/nvme0n1p2
    maj-min: 259:2 label: N/A uuid: 1f5997db-2064-476c-93dc-539f29aaa3e1
  ID-4: /var/cache raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
    used: 82.82 GiB (17.8%) fs: btrfs block-size: 4096 B dev: /dev/nvme0n1p2
    maj-min: 259:2 label: N/A uuid: 1f5997db-2064-476c-93dc-539f29aaa3e1
  ID-5: /var/log raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
    used: 82.82 GiB (17.8%) fs: btrfs block-size: 4096 B dev: /dev/nvme0n1p2
    maj-min: 259:2 label: N/A uuid: 1f5997db-2064-476c-93dc-539f29aaa3e1
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/sda1 maj-min: 8:1 size: 114.55 GiB fs: exfat label: Sandisk_128
    uuid: CC3C-0343
  ID-2: /dev/sda2 maj-min: 8:2 size: 1 KiB fs: N/A label: N/A uuid: N/A
  ID-3: /dev/sda5 maj-min: 8:5 size: 1.13 GiB fs: swap label: N/A
    uuid: 4d06e0fa-8c15-4d51-afc4-47e4b610dd97
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 10 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-5:2 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb
    interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029
    class-ID: e001
  Device-2: 1-6:3 info: ASUSTek AURA LED Controller type: HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 16mA
    chip-ID: 0b05:1939 class-ID: 0300 serial: <filter>
  Hub-2: 1-7:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
    power: 100mA chip-ID: 05e3:0610 class-ID: 0900
  Device-1: 1-9:5 info: foostan Corne Keyboard Rev.1 (Split Common)
    type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1
    speed: 12 Mb/s power: 500mA chip-ID: 4653:0001 class-ID: 0300
  Device-2: 1-10:6 info: Logitech 2.4GHz Cordless Desktop
    type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 2.0
    speed: 1.5 Mb/s power: 98mA chip-ID: 046d:c52a class-ID: 0301
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-4: 3-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 3-2:2 info: Realtek RTL2838 DVB-T type: Video
    driver: dvb_usb_rtl28xxu interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
    chip-ID: 0bda:2838 class-ID: 0000 serial: <filter>
  Hub-5: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-6: 5-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Hub-7: 5-1:2 info: Genesys Logic Hub ports: 4 rev: 2.1 speed: 480 Mb/s
    power: 100mA chip-ID: 05e3:0610 class-ID: 0900
  Device-1: 5-1.3:4 info: Logitech Unifying Receiver
    type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3
    rev: 2.0 speed: 12 Mb/s power: 98mA chip-ID: 046d:c52b class-ID: 0300
  Device-2: 5-2:3 info: Microsoft LifeCam HD-3000 type: Video,Audio
    driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s
    power: 500mA chip-ID: 045e:0810 class-ID: 0102
  Hub-8: 6-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-9: 6-1:2 info: Genesys Logic Hub ports: 4 rev: 3.2 speed: 5 Gb/s
    chip-ID: 05e3:0626 class-ID: 0900
  Device-1: 6-1.4:3 info: SanDisk Ultra Dual type: Mass Storage
    driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA
    chip-ID: 0781:5590 class-ID: 0806 serial: <filter>
Sensors:
  System Temperatures: cpu: N/A mobo: N/A gpu: nvidia temp: 50 C
  Fan Speeds (RPM): N/A gpu: nvidia fan: 38%
Info:
  Processes: 372 Uptime: 26m wakeups: 2 Init: systemd v: 250 tool: systemctl
  Compilers: gcc: 11.1.0 clang: 13.0.0 Packages: 1352 pacman: 1330 lib: 371
  flatpak: 13 snap: 9 Shell: fish (sudo) v: 3.3.1 default: Bash v: 5.1.16
  running-in: konsole inxi: 3.3.12

I cannot reproduce this issue, if you think this is caused by nvidia drivers it may be wise to ask them instead.

Here is a link you should read before posting something

1 Like

Hi.
I have the exact two ram models:

KF3200C16D4/32GX
KHX3200C16D4/32GX

mixed into a Rocky Linux 9 installation and whenever I put both ram models in (2x of each, 4 total), it crashes the OS after a few minutes.

I found this topic by googling the two ram models.
If you still have this problem, I would be curious to see if yours works with just one ram model installed.
Mine works fine untill I mix the two.

I need to also test disabling the XMP profile in bios, maybe that would make them get along with one another.