Installed something using Wine, and now everytime I run Steam, the GUI turns black

I was in the process of downloading shaders from >>reshade(dot)me<< for Minecraft which I did also downloaded OpenJDK for, I also mistakenly ran it with Wine. After that whenever I ran Steam besides the top and bottom toolbars, the entirety of what is to see is black. I can still use small mode and big picture doesn’t have that problem.

I could not run wine uninstall as it doesn’t appear for me. I both deleted it using the AUR and then reinstall them using the AUR only to manually delete them because it still wasn’t working deleting /home/user/.steam/ and using this command, rm -r ~/.wine which still could not fix the problem.

System:
  Kernel: 5.13.13-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.13-x86_64 
  root=UUID=e577da92-ef1b-4176-bf41-140994193173 rw quiet apparmor=1 
  security=apparmor udev.log_priority=3 
  Desktop: KDE Plasma 5.22.5 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM 
  Distro: Manjaro Linux base: Arch Linux 
Machine:
  Type: Desktop Mobo: Micro-Star model: MAG X570 TOMAHAWK WIFI (MS-7C84) 
  v: 1.0 serial: <filter> UEFI: American Megatrends LLC. v: 1.60 
  date: 05/28/2021 
Battery:
  Message: No system battery data found. Is one present? 
Memory:
  RAM: total: 31.28 GiB used: 7.36 GiB (23.5%) 
  RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
CPU:
  Info: 12-Core model: AMD Ryzen 9 5900X bits: 64 type: MT MCP arch: Zen 3 
  family: 19 (25) model-id: 21 (33) stepping: 0 microcode: A201009 cache: 
  L2: 6 MiB bogomips: 177686 
  Speed: 3349 MHz min/max: 2200/3700 MHz boost: enabled Core speeds (MHz): 
  1: 3349 2: 2547 3: 2511 4: 2568 5: 2615 6: 2553 7: 2383 8: 2565 9: 2879 
  10: 2876 11: 3595 12: 2879 13: 2872 14: 2880 15: 2880 16: 2877 17: 3596 
  18: 2873 19: 2876 20: 2875 21: 3600 22: 2874 23: 2878 24: 2878 
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 
  bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy 
  constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc 
  cr8_legacy cx16 cx8 de decodeassists erms extapic extd_apicid f16c 
  flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs 
  invpcid irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor 
  movbe msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx ospke osvw 
  overflow_recov pae pat pausefilter pclmulqdq pdpe1gb perfctr_core 
  perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt pse pse36 rdpid rdpru 
  rdrand rdseed rdt_a rdtscp rep_good sep sha_ni skinit smap smca smep ssbd 
  sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce 
  topoext tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vaes vgif vmcb_clean 
  vme vmmcall vpclmulqdq wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt 
  xsaves 
  Vulnerabilities: Type: itlb_multihit status: Not affected 
  Type: l1tf status: Not affected 
  Type: mds status: Not affected 
  Type: meltdown status: Not affected 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW, 
  STIBP: always-on, RSB filling 
  Type: srbds status: Not affected 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: NVIDIA GA102 [GeForce RTX 3080] vendor: eVga.com. driver: nvidia 
  v: 470.63.01 alternate: nouveau,nvidia_drm bus-ID: 2d:00.0 
  chip-ID: 10de:2206 class-ID: 0300 
  Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver: 
  loaded: nvidia display-ID: :0 screens: 1 
  Screen-1: 0 s-res: 3840x1080 s-dpi: 81 s-size: 1204x343mm (47.4x13.5") 
  s-diag: 1252mm (49.3") 
  Monitor-1: HDMI-0 res: 1920x1080 hz: 60 dpi: 81 size: 600x340mm (23.6x13.4") 
  diag: 690mm (27.2") 
  Monitor-2: DP-0 res: 1920x1080 dpi: 82 size: 597x336mm (23.5x13.2") 
  diag: 685mm (27") 
  OpenGL: renderer: NVIDIA GeForce RTX 3080/PCIe/SSE2 
  v: 4.6.0 NVIDIA 470.63.01 direct render: Yes 
Audio:
  Device-1: NVIDIA GA102 High Definition Audio vendor: eVga.com. 
  driver: snd_hda_intel v: kernel bus-ID: 2d:00.1 chip-ID: 10de:1aef 
  class-ID: 0403 
  Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI 
  driver: snd_hda_intel v: kernel bus-ID: 2f:00.4 chip-ID: 1022:1487 
  class-ID: 0403 
  Sound Server-1: ALSA v: k5.13.13-1-MANJARO running: yes 
  Sound Server-2: JACK v: 1.9.19 running: no 
  Sound Server-3: PulseAudio v: 15.0 running: yes 
  Sound Server-4: PipeWire v: 0.3.34 running: yes 
Network:
  Device-1: Realtek RTL8125 2.5GbE vendor: Micro-Star MSI driver: r8169 
  v: kernel port: f000 bus-ID: 26:00.0 chip-ID: 10ec:8125 class-ID: 0200 
  IF: enp38s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
  IP v4: <filter> type: dynamic noprefixroute scope: global 
  broadcast: <filter> 
  IP v6: <filter> type: noprefixroute scope: link 
  WAN IP: <filter> 
Bluetooth:
  Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-4:2 
  chip-ID: 8087:0029 class-ID: e001 
  Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends 
Logical:
  Message: No logical block device data found. 
RAID:
  Message: No RAID data found. 
Drives:
  Local Storage: total: 2.73 TiB used: 134.75 GiB (4.8%) 
  SMART Message: Unable to run smartctl. Root privileges required. 
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO 1TB 
  size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s 
  lanes: 4 type: SSD serial: <filter> rev: 2B2QEXE7 temp: 35.9 C scheme: GPT 
  ID-2: /dev/nvme1n1 maj-min: 259:1 vendor: Samsung model: SSD 970 EVO 1TB 
  size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s 
  lanes: 4 type: SSD serial: <filter> rev: 2B2QEXE7 temp: 21.9 C scheme: GPT 
  ID-3: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 1TB 
  size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s 
  type: SSD serial: <filter> rev: 4B6Q scheme: GPT 
  Message: No optical or floppy data found. 
Partition:
  ID-1: / raw-size: 50 GiB size: 48.91 GiB (97.83%) used: 12.69 GiB (26.0%) 
  fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:3 label: root 
  uuid: e577da92-ef1b-4176-bf41-140994193173 
  ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) 
  used: 288 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:2 label: BOOT 
  uuid: 3930-31C8 
  ID-3: /home raw-size: 881.01 GiB size: 866.11 GiB (98.31%) 
  used: 122.05 GiB (14.1%) fs: ext4 dev: /dev/nvme0n1p3 maj-min: 259:4 
  label: home uuid: b4012f31-1b13-4654-9385-9a1a3eb8bada 
Swap:
  Alert: No swap data was found. 
Unmounted:
  ID-1: /dev/nvme1n1p1 maj-min: 259:5 size: 931.51 GiB fs: ext4 label: N/A 
  uuid: b79d2e91-769a-4b8c-ae3b-6c3f72fc21ba 
  ID-2: /dev/sda1 maj-min: 8:1 size: 931.51 GiB fs: ext4 label: backup 
  uuid: 65e8e9bb-d885-48cd-bc7c-966ea0e5993e 
USB:
  Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Device-1: 1-4:2 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb 
  interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029 
  class-ID: e001 
  Device-2: 1-6:3 info: Glorious Model O Wireless type: Mouse,Keyboard 
  driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s 
  power: 500mA chip-ID: 258a:2011 class-ID: 0301 serial: <filter> 
  Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
  Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Device-1: 3-1:2 info: GreenAsia multimedia keyboard controller 
  type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 
  speed: 1.5 Mb/s power: 100mA chip-ID: 0e8f:0022 class-ID: 0300 
  Device-2: 3-5:3 info: Micro Star MYSTIC LIGHT type: HID 
  driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s 
  power: 500mA chip-ID: 1462:7c84 class-ID: 0300 serial: <filter> 
  Hub-4: 3-6:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
  power: 100mA chip-ID: 05e3:0608 class-ID: 0900 
  Hub-5: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
  Hub-6: 5-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Hub-7: 6-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
Sensors:
  System Temperatures: cpu: 41.5 C mobo: N/A gpu: nvidia temp: 27 C 
  Fan Speeds (RPM): N/A gpu: nvidia fan: 0% 
Info:
  Processes: 448 Uptime: 7h 19m wakeups: 0 Init: systemd v: 248 
  tool: systemctl Compilers: gcc: 11.1.0 Packages: 1305 pacman: 1300 lib: 396 
  flatpak: 0 snap: 5 Shell: Zsh v: 5.8 default: Bash v: 5.1.8 
  running-in: konsole inxi: 3.3.06 

Where should I look to for me to fix this problem I’ve caused or more specific files that I need to delete and repair?

Hi, welcome to Manjaro! I believe your issue with Steam may be due to the recent update to Freetype2; see Stable Update New Issues. Your Wine installation and deleting of files may just be coincidental. I recommend you have a look and see if running Steam-Native or switching to the Steam beta fixes the issue with Steam for you.

2 Likes

This was indeed the problem and I had to enter into the Beta program which I did after updating the maintainer keys. Thank you summrun!

No worries, glad it helped and everything is working ok for you now. I would recommend checking the release announcements pages for pointers on potential issues, as many are caught and reported there.

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.