Hybrid sleep not working

S2 sleep and hibernate both work fine,
hybrid sleep works only if I try to boot the laptop back on after a short amount of time.
Leaving the laptop for a couple hours and then trying to boot from hybrid sleep results in a black screen (not even turned on).

Inxi output:

System:
  Kernel: 6.1.7-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1-x86_64
    root=UUID=0fae45e7-a05d-4151-bd5b-9720ebc67797 rw quiet splash apparmor=1
    security=apparmor resume=UUID=e6409053-0f84-4a27-80f7-ba2108682f0a
    udev.log_priority=3
  Desktop: GNOME v: 43.2 tk: GTK v: 3.24.36 wm: gnome-shell dm: GDM v: 43.0
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: HP product: HP EliteBook 840 14 inch G9 Notebook PC
    v: N/A serial: <filter> Chassis: type: 10 serial: <filter>
  Mobo: HP model: 8ABB v: KBC Version 20.06.00 serial: <filter> UEFI: HP
    v: U71 Ver. 01.02.04 date: 05/23/2022
Battery:
  ID-1: BAT0 charge: 48.7 Wh (93.7%) condition: 52.0/51.3 Wh (101.3%)
    volts: 12.6 min: 11.6 model: Hewlett-Packard Primary type: Li-ion
    serial: <filter> status: discharging cycles: 12
Memory:
  RAM: total: 15.3 GiB used: 4.05 GiB (26.5%)
  Array-1: capacity: 64 GiB slots: 2 EC: None max-module-size: 32 GiB
    note: est.
  Device-1: Bottom-Slot 1(left) type: DDR5 detail: synchronous size: 8 GiB
    speed: 4800 MT/s volts: curr: 1.1 width (bits): data: 64 total: 64
    manufacturer: Samsung part-no: M425R1GB4BB0-CQKOD serial: <filter>
  Device-2: Bottom-Slot 2(right) type: DDR5 detail: synchronous size: 8 GiB
    speed: 4800 MT/s volts: curr: 1.1 width (bits): data: 64 total: 64
    manufacturer: Samsung part-no: M425R1GB4BB0-CQKOD serial: <filter>
CPU:
  Info: model: 12th Gen Intel Core i5-1235U socket: U3E1 bits: 64
    type: MST AMCP arch: Alder Lake level: v3 note: check built: 2021+
    process: Intel 7 (10nm ESF) family: 6 model-id: 0x9A (154) stepping: 4
    microcode: 0x424
  Topology: cpus: 1x cores: 10 mt: 2 tpc: 2 st: 8 threads: 12 smt: enabled
    cache: L1: 928 KiB desc: d-8x32 KiB, 2x48 KiB; i-2x32 KiB, 8x64 KiB
    L2: 6.5 MiB desc: 2x1.2 MiB, 2x2 MiB L3: 12 MiB desc: 1x12 MiB
  Speed (MHz): avg: 2353 high: 2500 min/max: 400/4400:3300
    base/boost: 3960/4400 scaling: driver: intel_pstate governor: powersave
    volts: 1.2 V ext-clock: 100 MHz cores: 1: 2500 2: 2500 3: 741 4: 2500
    5: 2500 6: 2500 7: 2500 8: 2500 9: 2500 10: 2500 11: 2500 12: 2500
    bogomips: 59916
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
    arch_capabilities arch_lbr arch_perfmon art avx avx2 avx_vnni bmi1 bmi2
    bts cat_l2 cdp_l2 clflush clflushopt clwb cmov constant_tsc cpuid
    cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est
    f16c flexpriority flush_l1d fma fpu fsgsbase fsrm fxsr gfni hfi ht hwp
    hwp_act_window hwp_epp hwp_notify hwp_pkg_req ibpb ibrs ibrs_enhanced ibt
    ida intel_pt invpcid invpcid_single lahf_lm lm mca mce md_clear mmx
    monitor movbe movdir64b movdiri msr mtrr nonstop_tsc nopl nx ospke pae pat
    pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pku pln pni popcnt pse pse36 pts
    rdpid rdrand rdseed rdt_a rdtscp rep_good sdbg sep serialize sha_ni smap
    smep smx split_lock_detect ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp
    syscall tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer tsc_known_freq
    umip vaes vme vmx vnmi vpclmulqdq vpid waitpkg x2apic xgetbv1 xsave xsavec
    xsaveopt xsaves xtopology xtpr
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB
    filling, PBRSB-eIBRS: SW sequence
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel Alder Lake-UP3 GT2 [Iris Xe Graphics] vendor: Hewlett-Packard
    driver: i915 v: kernel arch: Gen-12.2 process: Intel 10nm built: 2021-22+
    ports: active: eDP-1 empty: DP-1, DP-2, DP-3, DP-4, HDMI-A-1
    bus-ID: 00:02.0 chip-ID: 8086:46a8 class-ID: 0300
  Device-2: Quanta HP 5MP Camera type: USB driver: uvcvideo bus-ID: 3-1:2
    chip-ID: 0408:545b class-ID: 0e02 serial: <filter>
  Display: server: X.org v: 1.21.1.6 with: Xwayland v: 22.1.7
    compositor: gnome-shell driver: X: loaded: modesetting alternate: fbdev,vesa
    dri: iris gpu: i915 display-ID: :1 screens: 1
  Screen-1: 0 s-res: 1920x1200 s-size: <missing: xdpyinfo>
  Monitor-1: eDP-1 model: LG Display 0x06df built: 2021 res: 1920x1200 hz: 60
    dpi: 161 gamma: 1.2 size: 302x188mm (11.89x7.4") diag: 356mm (14")
    ratio: 16:10 modes: 1920x1200
  API: OpenGL v: 4.6 Mesa 22.3.3 renderer: Mesa Intel Graphics (ADL GT2)
    direct render: Yes
Audio:
  Device-1: Intel Alder Lake PCH-P High Definition Audio
    vendor: Hewlett-Packard driver: sof-audio-pci-intel-tgl
    alternate: snd_hda_intel,snd_sof_pci_intel_tgl bus-ID: 00:1f.3
    chip-ID: 8086:51c8 class-ID: 0401
  Sound API: ALSA v: k6.1.7-1-MANJARO running: yes
  Sound Server-1: JACK v: 1.9.21 running: no
  Sound Server-2: PulseAudio v: 16.1 running: yes
  Sound Server-3: PipeWire v: 0.3.64 running: yes
Network:
  Device-1: Intel Alder Lake-P PCH CNVi WiFi driver: iwlwifi v: kernel
    bus-ID: 00:14.3 chip-ID: 8086:51f0 class-ID: 0280
  IF: wlp0s20f3 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  IF-ID-1: wwan0 state: down mac: N/A
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel type: USB driver: btusb v: 0.8 bus-ID: 3-10:4
    chip-ID: 8087:0033 class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 2 state: down bt-service: enabled,running
    rfk-block: hardware: no software: yes address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 476.94 GiB used: 48.74 GiB (10.2%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZVLQ512HBLU-00BH1
    size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 type: SSD serial: <filter> rev: HPS1NFAV temp: 19.9 C scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 459.85 GiB size: 451.56 GiB (98.20%)
    used: 48.74 GiB (10.8%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p2
    maj-min: 259:2 label: N/A uuid: 0fae45e7-a05d-4151-bd5b-9720ebc67797
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 312 KiB (0.1%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
    maj-min: 259:1 label: NO_LABEL uuid: 408B-0094
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 16.8 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/nvme0n1p3 maj-min: 259:3 label: swap
    uuid: e6409053-0f84-4a27-80f7-ba2108682f0a
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 2-0:1 info: Super-speed hub ports: 3 rev: 3.1 speed: 20 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 12 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 3-1:2 info: Quanta HP 5MP Camera type: Video driver: uvcvideo
    interfaces: 4 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 0408:545b
    class-ID: 0e02 serial: <filter>
  Device-2: 3-7:5 info: Synaptics type: <vendor specific> driver: N/A
    interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 06cb:00f0
    class-ID: ff00 serial: <filter>
  Device-3: 3-10:4 info: Intel type: Bluetooth driver: btusb interfaces: 2
    rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0033 class-ID: e001
  Hub-4: 4-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: 27.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 323 Uptime: 1h 15m wakeups: 1279 Init: systemd v: 252
  default: graphical tool: systemctl Compilers: gcc: 12.2.1 clang: 15.0.7
  Packages: 1316 pm: pacman pkgs: 1297 libs: 317 tools: gnome-software,pamac
  pm: flatpak pkgs: 12 pm: snap pkgs: 7 Shell: Zsh (sudo) v: 5.9 default: Bash
  v: 5.1.16 running-in: gnome-terminal inxi: 3.3.24

FULL SOLUTION

  • I removed the auto-cpufreq package (it is a optional package so if you didn’t install it ignore this step). I found that powertop and tlp work fine its just this package that causes problems.

  • For me I updated the kernel from 6.1 to 6.2, however if you are reading this later you should probably try to update to the newest kernel u can, if that won’t fix the issue u can also try to update to a experimental kernel (for me 6.2 was experimental rc when I updated).

Copied from: https ://forum.manjaro.org/t/kernel-panic-after-trying-to-wake-up-from-hybrid-sleep/132224

1 Like

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.