Yes the linux-khadas
seems to kernel panic for me too.
Sad news for GT King Pro using bootscript
Starting kernel ...
uboot time: 12628591 us
[ 0.876605] SError Interrupt on CPU0, code 0xbf000000 -- SError
[ 0.876620] CPU: 0 PID: 15 Comm: kworker/0:1 Not tainted 5.15.4-3-MANJARO-ARM-KHADAS #1
[ 0.876627] Hardware name: Beelink GT-King Pro (DT)
[ 0.876632] Workqueue: events_freezable mmc_rescan
[ 0.876649] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.876659] pc : slabinfo_write+0x1b0/0x410
[ 0.876678] lr : allocate_slab+0x2a4/0x3f4
[ 0.876686] sp : ffff800011cd3630
[ 0.876688] x29: ffff800011cd3630 x28: 0000000000000000 x27: 0000000000000000
[ 0.876697] x26: ffff0000000ac880 x25: 0000000000000000 x24: ffff000005400000
[ 0.876706] x23: 0000000000000004 x22: 0000000000008000 x21: fffffc0000150000
[ 0.876714] x20: 0000000000000001 x19: ffff000000001800 x18: 0000000000000020
[ 0.876723] x17: 0000000000000001 x16: 0000000000000019 x15: 0000000000000000
[ 0.876731] x14: 0000000000000002 x13: 00000000000ceac8 x12: ffff800011bba238
[ 0.876739] x11: ffff800011bba218 x10: 0000000000000000 x9 : 0000000000000000
[ 0.876747] x8 : 0000000000000000 x7 : 0000000000000040 x6 : fffffc0000150040
[ 0.876755] x5 : 0000000000000000 x4 : ffff000000000420 x3 : 0000000000000001
[ 0.876763] x2 : 000000000000000a x1 : 0000000000000004 x0 : ffff000000000400
[ 0.876774] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 0.876778] CPU: 0 PID: 15 Comm: kworker/0:1 Not tainted 5.15.4-3-MANJARO-ARM-KHADAS #1
[ 0.876785] Hardware name: Beelink GT-King Pro (DT)
[ 0.876788] Workqueue: events_freezable mmc_rescan
[ 0.876794] Call trace:
[ 0.876796] dump_backtrace+0x0/0x1cc
[ 0.876808] show_stack+0x18/0x24
[ 0.876815] dump_stack_lvl+0x68/0x84
[ 0.876825] dump_stack+0x18/0x34
[ 0.876831] panic+0x15c/0x32c
[ 0.876841] nmi_panic+0x8c/0x90
[ 0.876845] SError Interrupt on CPU4, code 0xbf000000 -- SError
[ 0.876848] arm64_serror_panic+0x6c/0x7c
[ 0.876854] do_serror+0x58/0x5c
[ 0.876856] CPU: 4 PID: 284 Comm: systemd-udevd Not tainted 5.15.4-3-MANJARO-ARM-KHADAS #1
[ 0.876860] el1h_64_error_handler+0x30/0x50
[ 0.876864] Hardware name: Beelink GT-King Pro (DT)
[ 0.876868] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.876870] el1h_64_error+0x78/0x7c
[ 0.876876] slabinfo_write+0x1b0/0x410
[ 0.876875] pc : setup_object.isra.0+0x0/0x110
[ 0.876883] new_slab+0x44/0x6c
[ 0.876887] lr : allocate_slab+0x2a4/0x3f4
[ 0.876889] ___slab_alloc.constprop.0+0x2d8/0x3a4
[ 0.876894] sp : ffff8000123a39e0
[ 0.876897] x29: ffff8000123a39e0
[ 0.876897] __slab_alloc.constprop.0+0x30/0x7c
[ 0.876900] x28: 0000000000000000 x27: 0000000001200000
[ 0.876905] __kmalloc+0x308/0x330
[ 0.876908] x26: ffff000005430580 x25: 000000000000000b x24: ffff000005430000
[ 0.876912] mmc_mq_init_request+0x3c/0x90
[ 0.876917] x23: 0000000000000017 x22: 0000000000003f40 x21: fffffc0000150c00
[ 0.876926] x20: 0000000000000011
[ 0.876921] blk_mq_alloc_rqs+0x218/0x290
[ 0.876928] x19: ffff000000007c00 x18: 0000000000000000
[ 0.876934] x17: 0000000000000000
[ 0.876932] __blk_mq_alloc_map_and_request+0x54/0xf0
[ 0.876936] x16: 0000000000000000 x15: ffff000000a46f80
[ 0.876942] x14: 0000000000000002
[ 0.876940] blk_mq_alloc_map_and_requests+0x4c/0xf0
[ 0.876944] x13: 00000000000ceac8 x12: ffff800011bba1d0
[ 0.876951] x11: ffff800011bba1b0 x10: 0000000000000000
[ 0.876950] blk_mq_alloc_tag_set+0xf8/0x260
[ 0.876955] x9 : 0000000000000000
[ 0.876958] x8 : 0000000000000000 x7 : 0000000000000040
[ 0.876959] mmc_init_queue+0xac/0x180
[ 0.876962] x6 : fffffc0000150c40
[ 0.876966] x5 : 0000000000000000 x4 : 0000000000000000
[ 0.876967] mmc_blk_alloc_req+0xbc/0x33c
[ 0.876969] x3 : 00000000000002c0
[ 0.876973]
[ 0.876974] x2 : ffff000000029480 x1 : ffff000005432100
[ 0.876976] mmc_blk_probe+0x88/0x35c
[ 0.876978] x0 : ffff000000007c00
[ 0.876984] mmc_bus_probe+0x24/0x30
[ 0.876989] call_driver_probe+0x2c/0x140
[ 0.876997] really_probe+0xb4/0x370
[ 0.877003] __driver_probe_device+0xf8/0x120
[ 0.877009] driver_probe_device+0x40/0x100
[ 0.877015] __device_attach_driver+0x98/0x130
[ 0.877021] bus_for_each_drv+0x78/0xd0
[ 0.877028] __device_attach+0xd8/0x1b4
[ 0.877033] device_initial_probe+0x14/0x20
[ 0.877040] bus_probe_device+0x98/0xa0
[ 0.877046] device_add+0x318/0x500
[ 0.877051] mmc_add_card+0x12c/0x2c4
[ 0.877056] mmc_attach_mmc+0xf4/0x180
[ 0.877064] mmc_rescan_try_freq+0x160/0x190
[ 0.877072] mmc_rescan+0x168/0x1f0
[ 0.877078] process_one_work+0x1c0/0x344
[ 0.877086] worker_thread+0x68/0x38c
[ 0.877092] kthread+0x120/0x130
[ 0.877099] ret_from_fork+0x10/0x20
[ 0.877107] SMP: stopping secondary CPUs
[ 0.877116] Kernel Offset: disabled
[ 0.877118] CPU features: 0x00003051,00000846
[ 0.877122] Memory Limit: none
and this
[mmc_init] mmc init success
Device: SDIO Port B
Manufacturer ID: 3
OEM: 5344
Name: SB16G
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 14.8 GiB
mmc clock: 40000000
Bus Width: 4-bit
reading s905_autoscript
930 bytes read in 4 ms (226.6 KiB/s)
## Executing script at 01020000
reading u-boot.ext
** Unable to read file u-boot.ext **
** Bad device usb 0 **
reading uImage
28906048 bytes read in 1568 ms (17.6 MiB/s)
reading uInitrd
8293325 bytes read in 452 ms (17.5 MiB/s)
reading uEnv.ini
243 bytes read in 3 ms (79.1 KiB/s)
## Error: "mac" not defined
## Error: "eth_mac" not defined
reading /dtbs/amlogic/meson-g12b-gtking-pro.dtb
75658 bytes read in 11 ms (6.6 MiB/s)
avb2: 0
ee_gate_off ...
avb2: 0
## Booting kernel from Legacy Image at 01080000 ...
Image Name: uImage
Image Type: AArch64 Linux Kernel Image (uncompressed)
Data Size: 28905984 Bytes = 27.6 MiB
Load Address: 01080000
Entry Point: 01080000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 13000000 ...
Image Name: uInitrd Image
Image Type: AArch64 Linux RAMDisk Image (uncompressed)
Data Size: 8293261 Bytes = 7.9 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0
active_slot is normal
load dtb from 0x1000000 ......
Amlogic multi-dtb tool
Single dtb detected
## Flattened Device Tree blob at 01000000
Booting using the fdt blob at 0x1000000
find 1 dtbos
No androidboot.dtbo_idx configured
And no dtbos will be applied
Loading Kernel Image(COMP_NONE) ... OK
kernel loaded at 0x01080000, end = 0x02c11200
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
[rsvmem] fdt get prop fail.
Loading Ramdisk to 7f017000, end 7f7ffb8d ... OK
Loading Device Tree to 000000001ffea000, end 000000001ffff83f ... OK
Starting kernel ...
uboot time: 6766818 us
[ 0.872261] SError Interrupt on CPU5, code 0xbf000000 -- SError
[ 0.872272] CPU: 5 PID: 284 Comm: udevadm Not tainted 5.15.4-3-MANJARO-ARM-KHADAS #1
[ 0.872279] Hardware name: Beelink GT-King Pro (DT)
[ 0.872282] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.872289] pc : __init_rwsem+0x20/0x30
[ 0.872304] lr : init_once+0x78/0xa0
[ 0.872310] sp : ffff8000131b3790
[ 0.872312] x29: ffff8000131b3790 x28: 0000000000000000 x27: 0000000000000000
[ 0.872322] x26: ffff000000af8e80 x25: 0000000000000000 x24: ffff000005400000
[ 0.872330] x23: 0000000000000019 x22: 0000000000003db8 x21: fffffc0000150000
[ 0.872337] x20: ffff000005403160 x19: ffff000005403160 x18: 0000000000000000
[ 0.872344] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.872351] x14: 0000000000000002 x13: 00000000000cea2b x12: ffff800011bba1d0
[ 0.872358] x11: ffff800011bba1b0 x10: 0000000000000000 x9 : 0000000000000000
[ 0.872364] x8 : ffff0000054033d0 x7 : 0000000000000000 x6 : 000000000000003f
[ 0.872370] x5 : 0000000000000040 x4 : ffffffffffffffe0 x3 : 0000000000000021
[ 0.872377] x2 : ffff800011c79f20 x1 : ffff000005403348 x0 : ffff000005403330
[ 0.872386] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 0.872389] CPU: 5 PID: 284 Comm: udevadm Not tainted 5.15.4-3-MANJARO-ARM-KHADAS #1
[ 0.872395] Hardware name: Beelink GT-King Pro (DT)
[ 0.872398] Call trace:
[ 0.872399] dump_backtrace+0x0/0x1cc
[ 0.872409] show_stack+0x18/0x24
[ 0.872416] dump_stack_lvl+0x68/0x84
[ 0.872425] dump_stack+0x18/0x34
[ 0.872430] panic+0x15c/0x32c
[ 0.872437] nmi_panic+0x8c/0x90
[ 0.872443] arm64_serror_panic+0x6c/0x7c
[ 0.872447] do_serror+0x58/0x5c
[ 0.872451] el1h_64_error_handler+0x30/0x50
[ 0.872459] el1h_64_error+0x78/0x7c
[ 0.872464] __init_rwsem+0x20/0x30
[ 0.872470] setup_object.isra.0+0xf8/0x110
[ 0.872477] allocate_slab+0x258/0x3f4
[ 0.872482] new_slab+0x44/0x6c
[ 0.872487] ___slab_alloc.constprop.0+0x2d8/0x3a4
[ 0.872493] __slab_alloc.constprop.0+0x30/0x7c
[ 0.872499] kmem_cache_alloc+0x2b4/0x2d0
[ 0.872504] alloc_inode+0x84/0xdc
[ 0.872508] iget_locked+0xfc/0x26c
[ 0.872513] kernfs_get_inode+0x1c/0x60
[ 0.872520] kernfs_iop_lookup+0x74/0xd0
[ 0.872526] __lookup_slow+0x88/0x150
[ 0.872534] walk_component+0x114/0x1e0
[ 0.872539] path_lookupat+0x78/0x19c
[ 0.872543] path_openat+0x140/0x1cc
[ 0.872547] do_filp_open+0x84/0x134
[ 0.872551] do_sys_openat2+0xb0/0x16c
[ 0.872558] __arm64_sys_openat+0x68/0xb0
[ 0.872563] invoke_syscall+0x48/0x114
[ 0.872570] el0_svc_common.constprop.0+0x44/0xec
[ 0.872577] do_el0_svc+0x24/0x90
[ 0.872583] el0_svc+0x20/0x60
[ 0.872588] el0t_64_sync_handler+0x1a4/0x1b0
[ 0.872593] el0t_64_sync+0x1a0/0x1a4
[ 0.872600] SMP: stopping secondary CPUs
[ 0.872607] Kernel Offset: disabled
[ 0.872608] CPU features: 0x00003051,00000846
[ 0.872613] Memory Limit: none