How can I Install global theme on Budgie?

Like this

 inxi -v7azy
System:
  Kernel: 6.1.12-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1-x86_64
    root=UUID=be619a77-d895-4540-89af-a2ff1a55907c rw quiet apparmor=1
    security=apparmor udev.log_priority=3
  Desktop: Budgie v: 10.7 info: budgie-panel wm: budgie-wm dm: LightDM
    v: 1.32.0 Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
  Mobo: ASUSTeK model: PRIME Z490-A v: Rev 1.xx serial: <superuser required>
    UEFI: American Megatrends v: 2601 date: 05/17/2022
Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 31.25 GiB used: 3.9 GiB (12.5%)
  RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: Intel Core i7-10700K bits: 64 type: MT MCP arch: Comet Lake
    gen: core 10 level: v3 note: check built: 2020 process: Intel 14nm family: 6
    model-id: 0xA5 (165) stepping: 5 microcode: 0xF4
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
    L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 2 MiB desc: 8x256 KiB L3: 16 MiB
    desc: 1x16 MiB
  Speed (MHz): avg: 3800 min/max: 800/5100 scaling: driver: intel_pstate
    governor: powersave cores: 1: 3800 2: 3800 3: 3800 4: 3800 5: 3800 6: 3800
    7: 3800 8: 3800 9: 3800 10: 3800 11: 3800 12: 3800 13: 3800 14: 3800
    15: 3800 16: 3800 bogomips: 121639
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
    arch_capabilities arch_perfmon art avx avx2 bmi1 bmi2 bts clflush
    clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64
    dtherm dts epb erms est f16c flush_l1d fma fpu fsgsbase fxsr ht hwp
    hwp_act_window hwp_epp hwp_notify ibpb ibrs ibrs_enhanced ida intel_pt
    invpcid invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe mpx
    msr mtrr nonstop_tsc nopl nx ospke pae pat pbe pcid pclmulqdq pdcm pdpe1gb
    pebs pge pku pln pni popcnt pse pse36 pts rdrand rdseed rdtscp rep_good
    sdbg sep smap smep smx ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall
    tm tm2 tsc tsc_adjust tsc_deadline_timer vme x2apic xgetbv1 xsave xsavec
    xsaveopt xsaves xtopology xtpr
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX unsupported
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
  Type: retbleed mitigation: Enhanced IBRS
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB
    filling, PBRSB-eIBRS: SW sequence
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
    vendor: ASUSTeK driver: amdgpu v: kernel arch: GCN-4 code: Arctic Islands
    process: GF 14nm built: 2016-20 pcie: gen: 3 speed: 8 GT/s lanes: 16 ports:
    active: HDMI-A-1 empty: DP-1, DP-2, DVI-D-1, HDMI-A-2 bus-ID: 01:00.0
    chip-ID: 1002:67df class-ID: 0300 temp: 50.0 C
  Display: x11 server: X.org v: 1.21.1.7 with: Xwayland v: 22.1.8
    compositor: budgie-wm driver: X: loaded: amdgpu unloaded: modesetting
    alternate: fbdev,vesa dri: radeonsi gpu: amdgpu display-ID: :0 screens: 1
  Screen-1: 0 s-res: 2560x1440 s-size: <missing: xdpyinfo>
  Monitor-1: HDMI-A-1 mapped: HDMI-A-0 model: AOC Q32G1WG4 serial: <filter>
    built: 2019 res: 2560x1440 dpi: 93 gamma: 1.2 size: 697x393mm (27.44x15.47")
    diag: 800mm (31.5") ratio: 16:9 modes: max: 2560x1440 min: 720x400
  API: OpenGL v: 4.6 Mesa 22.3.5 renderer: AMD Radeon RX 580 Series
    (polaris10 LLVM 15.0.7 DRM 3.49 6.1.12-1-MANJARO) direct-render: Yes
Audio:
  Device-1: Intel Comet Lake PCH cAVS vendor: ASUSTeK driver: snd_hda_intel
    v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3
    chip-ID: 8086:06c8 class-ID: 0403
  Device-2: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
    vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 16 link-max: gen: 3 speed: 8 GT/s bus-ID: 01:00.1 chip-ID: 1002:aaf0
    class-ID: 0403
  Sound API: ALSA v: k6.1.12-1-MANJARO running: yes
  Sound Server-1: JACK v: 1.9.22 running: no
  Sound Server-2: PulseAudio v: 16.1 running: yes
  Sound Server-3: PipeWire v: 0.3.65 running: yes
Network:
  Device-1: Intel Ethernet I225-V vendor: ASUSTeK driver: igc v: kernel pcie:
    gen: 2 speed: 5 GT/s lanes: 1 port: N/A bus-ID: 04:00.0 chip-ID: 8086:15f3
    class-ID: 0200
  IF: enp4s0 state: up speed: 100 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: dynamic noprefixroute scope: global
  IP v6: <filter> type: noprefixroute scope: link
  WAN IP: <filter>
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 3.25 TiB used: 44.72 GiB (1.3%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital
    model: WDS250G2B0C-00PXH0 size: 232.89 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 211070WD temp: 35.9 C scheme: GPT
  ID-2: /dev/nvme1n1 maj-min: 259:3 vendor: Samsung
    model: SSD 970 EVO Plus 250GB size: 232.89 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 2B2QEXM7 temp: 41.9 C scheme: MBR
  ID-3: /dev/sda maj-min: 8:0 vendor: Toshiba model: HDWD130 size: 2.73 TiB
    block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD
    rpm: 7200 serial: <filter> rev: ACF0 scheme: GPT
  ID-4: /dev/sdb maj-min: 8:16 type: USB vendor: Verbatim model: STORE N GO
    size: 57.66 GiB block-size: physical: 512 B logical: 512 B type: N/A
    serial: <filter> rev: 5.00 scheme: MBR
  ID-5: /dev/sdc maj-min: 8:32 type: USB vendor: SanDisk model: Cruzer Blade
    size: 14.32 GiB block-size: physical: 512 B logical: 512 B type: N/A
    serial: <filter> rev: 1.00 scheme: MBR
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 232.59 GiB size: 227.88 GiB (97.98%)
    used: 42.46 GiB (18.6%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2
    label: N/A uuid: be619a77-d895-4540-89af-a2ff1a55907c
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 312 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: N/A
    uuid: 4CF1-D51A
  ID-3: /run/media/bugi/Pinktxt_Pinktxt raw-size: 14.32 GiB
    size: 14 GiB (97.75%) used: 2.26 GiB (16.1%) fs: ext4 dev: /dev/sdc1
    maj-min: 8:33 label: Pinktxt/Pinktxt
    uuid: c2f2bdfe-96aa-42f0-a750-2cb70aee0c39
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/nvme1n1p1 maj-min: 259:4 size: 232.88 GiB fs: btrfs label: 1/1
    uuid: 6340902e-3d24-4069-b1ad-0ae376f4cd9c
  ID-2: /dev/sda1 maj-min: 8:1 size: 257.1 GiB fs: btrfs label: N/A
    uuid: 7f2ed2a1-df22-4000-b182-4097a3ea5f17
  ID-3: /dev/sdb1 maj-min: 8:17 size: 57.62 GiB fs: exfat label: Ventoy
    uuid: 4C5A-8C85
  ID-4: /dev/sdb2 maj-min: 8:18 size: 32 MiB fs: vfat label: VTOYEFI
    uuid: B228-8EFB
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 16 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-1:2 info: Verbatim Flash Drive type: Mass Storage
    driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 200mA
    chip-ID: 18a5:0302 class-ID: 0806 serial: <filter>
  Device-2: 1-3:3 info: SanDisk Cruzer Blade type: Mass Storage
    driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 200mA
    chip-ID: 0781:5567 class-ID: 0806 serial: <filter>
  Hub-2: 1-6:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
    power: 100mA chip-ID: 05e3:0608 class-ID: 0900
  Device-1: 1-9:5 info: Logitech G502 SE HERO Gaming Mouse type: Mouse,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 300mA
    chip-ID: 046d:c08b class-ID: 0300 serial: <filter>
  Device-2: 1-10:6 info: Corsair K95 RGB Platinum Keyboard [RGP0056]
    type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0
    speed: 12 Mb/s power: 500mA chip-ID: 1b1c:1b2d class-ID: 0300
    serial: <filter>
  Device-3: 1-11:7 info: ASUSTek AURA LED Controller type: HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 16mA
    chip-ID: 0b05:18f3 class-ID: 0300 serial: <filter>
  Hub-3: 2-0:1 info: Super-speed hub ports: 10 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: 42.0 C mobo: N/A gpu: amdgpu temp: 50.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 1207
Info:
  Processes: 374 Uptime: 27m wakeups: 0 Init: systemd v: 252 default: graphical
  tool: systemctl Compilers: gcc: 12.2.1 clang: 15.0.7 Packages: 1298
  pm: pacman pkgs: 1290 libs: 366 tools: octopi,pamac,yay pm: flatpak pkgs: 0
  pm: snap pkgs: 8 Shell: Bash v: 5.1.16 running-in: gnome-terminal
  inxi: 3.3.25

Thank you

You cannot - the screen shot is from KDE Plasma and budgie uses Gnome

Install a Gnome theme using the package manager - there is a multitude.

You could also use gnome-look.org - beware though - the theme should be maintained and be made for GTK3/4

@linux-aarhus

Thank you
sir

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.