Headphone jack not recognized properly

Support Sound
,
1

This morning my headphone jack worked as intended as a headphone/mic combo, I later was able to run a full system upgrade because I had this morning also just installed manjaro. After the full system upgrades through the package manager, Pulse Audio no longer detects my headphone jack as headphones, only the mic that’s on the headset.

I’m on a Lenovo ThinkPad, that’s dual booted with Windows 10. The headphones work just fine on windows.

After looking around I found some commands that might be helpful :

pacmd list-cards w/ headphones plugged in 1 card(s) available. index: 0 name: driver: owner module: 6 properties: alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xa1418000 irq 140" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1f.3" sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "9dc8" device.product.name = "Cannon Point-LP High Definition Audio Controller" device.form_factor = "internal" device.string = "0" device.description = "Built-in Audio" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" profiles: input:analog-stereo: Analog Stereo Input (priority 65, available: unknown) output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown) output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown) output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no) output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5965, available: no) output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no) output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (priority 865, available: no) output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no) output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (priority 865, available: no) output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no) output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (priority 5765, available: no) output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no) output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Analog Stereo Input (priority 665, available: no) output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no) output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Analog Stereo Input (priority 665, available: no) output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no) output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (priority 5765, available: no) output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no) output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: no) output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no) output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: no) output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no) output:hdmi-stereo-extra3+input:analog-stereo: Digital Stereo (HDMI 4) Output + Analog Stereo Input (priority 5765, available: no) output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no) output:hdmi-surround-extra3+input:analog-stereo: Digital Surround 5.1 (HDMI 4) Output + Analog Stereo Input (priority 665, available: no) output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no) output:hdmi-surround71-extra3+input:analog-stereo: Digital Surround 7.1 (HDMI 4) Output + Analog Stereo Input (priority 665, available: no) output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5700, available: no) output:hdmi-stereo-extra4+input:analog-stereo: Digital Stereo (HDMI 5) Output + Analog Stereo Input (priority 5765, available: no) output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 600, available: no) output:hdmi-surround-extra4+input:analog-stereo: Digital Surround 5.1 (HDMI 5) Output + Analog Stereo Input (priority 665, available: no) output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 600, available: no) output:hdmi-surround71-extra4+input:analog-stereo: Digital Surround 7.1 (HDMI 5) Output + Analog Stereo Input (priority 665, available: no) off: Off (priority 0, available: unknown) active profile: sinks: alsa_output.pci-0000_00_1f.3.analog-stereo/#4: Built-in Audio Analog Stereo sources: alsa_output.pci-0000_00_1f.3.analog-stereo.monitor/#8: Monitor of Built-in Audio Analog Stereo alsa_input.pci-0000_00_1f.3.analog-stereo/#9: Built-in Audio Analog Stereo ports: analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: no) properties: device.icon_name = "audio-input-microphone" analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: yes) properties: device.icon_name = "audio-input-microphone" analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown) properties: device.icon_name = "audio-speakers" hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no) properties: device.icon_name = "video-display" hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no) properties: device.icon_name = "video-display" hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no) properties: device.icon_name = "video-display" hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no) properties: device.icon_name = "video-display" hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no) properties: device.icon_name = "video-display"
pacmd list-cards w/ headphones not plugged in 1 card(s) available. index: 0 name: driver: owner module: 6 properties: alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xa1418000 irq 140" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1f.3" sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "9dc8" device.product.name = "Cannon Point-LP High Definition Audio Controller" device.form_factor = "internal" device.string = "0" device.description = "Built-in Audio" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" profiles: input:analog-stereo: Analog Stereo Input (priority 65, available: unknown) output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown) output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown) output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no) output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5965, available: no) output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no) output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (priority 865, available: no) output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no) output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (priority 865, available: no) output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no) output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (priority 5765, available: no) output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no) output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Analog Stereo Input (priority 665, available: no) output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no) output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Analog Stereo Input (priority 665, available: no) output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no) output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (priority 5765, available: no) output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no) output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: no) output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no) output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: no) output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no) output:hdmi-stereo-extra3+input:analog-stereo: Digital Stereo (HDMI 4) Output + Analog Stereo Input (priority 5765, available: no) output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no) output:hdmi-surround-extra3+input:analog-stereo: Digital Surround 5.1 (HDMI 4) Output + Analog Stereo Input (priority 665, available: no) output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no) output:hdmi-surround71-extra3+input:analog-stereo: Digital Surround 7.1 (HDMI 4) Output + Analog Stereo Input (priority 665, available: no) output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5700, available: no) output:hdmi-stereo-extra4+input:analog-stereo: Digital Stereo (HDMI 5) Output + Analog Stereo Input (priority 5765, available: no) output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 600, available: no) output:hdmi-surround-extra4+input:analog-stereo: Digital Surround 5.1 (HDMI 5) Output + Analog Stereo Input (priority 665, available: no) output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 600, available: no) output:hdmi-surround71-extra4+input:analog-stereo: Digital Surround 7.1 (HDMI 5) Output + Analog Stereo Input (priority 665, available: no) off: Off (priority 0, available: unknown) active profile: sinks: alsa_output.pci-0000_00_1f.3.analog-stereo/#4: Built-in Audio Analog Stereo sources: alsa_output.pci-0000_00_1f.3.analog-stereo.monitor/#8: Monitor of Built-in Audio Analog Stereo alsa_input.pci-0000_00_1f.3.analog-stereo/#9: Built-in Audio Analog Stereo ports: analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown) properties: device.icon_name = "audio-input-microphone" analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no) properties: device.icon_name = "audio-input-microphone" analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown) properties: device.icon_name = "audio-speakers" hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no) properties: device.icon_name = "video-display" hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no) properties: device.icon_name = "video-display" hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no) properties: device.icon_name = "video-display" hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no) properties: device.icon_name = "video-display" hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no) properties: device.icon_name = "video-display"
2

had similar problem with switching to pipewire.
can you check on
Volume control > output devices
your headphone is selected as fallback.

if it doesn’t help run pactl info

3

Volume control only has my speakers listed in the drop-down:
here’s pactl info

I also tried remaping my pins with HDA jack tasking but the mappings I tried didnt work. Although im not completely familar with it.

pactl info [kira@Bag ~]$ pactl info Server String: /run/user/1000/pulse/native Library Protocol Version: 34 Server Protocol Version: 34 Is Local: yes Client Index: 19 Tile Size: 65472 User Name: kira Host Name: Bag Server Name: pulseaudio Server Version: 14.2 Default Sample Specification: s16le 2ch 44100Hz Default Channel Map: front-left,front-right Default Sink: alsa_output.pci-0000_00_1f.3.analog-stereo Default Source: alsa_output.pci-0000_00_1f.3.analog-stereo.monitor
4

Restart manjaro and plug your headphone jack and check on journalctl -b

if you see errors for pulseaudio back up these folders, remove them and reinstall pulseaudio just to make sure

mkdir ~/pulsebackup
cp -r ~/.pulse ~/pulsebackup
cp -r ~/.pulse-cookie ~/pulsebackup
cp -r ~/.config/pulse ~/pulsebackup
rm -r ~/.pulse ~/.pulse-cookie ~/.config/pulse
sudo pacman -S pulseaudio

and restart, hope it helps.

5

I dont have any of those folders specified before restart, and i wasnt sure If i saw any errors or not, the headphone jack wasnt detected when I first booted into manjaro, so i have two logs for before and after I repluged in the jack

Journalctl -b on Boot: https://pastebin.com/wfkB7Bh8
Journalctl -b after replugging: https://pastebin.com/JGugpATQ

Difference between files

diff file1 file2 Journal begins at Mon 2021-03-01 02:01:11 PST, ends at Tue 2021-03-02 16:06:54 PST. -- -- Journal begins at Mon 2021-03-01 02:01:11 PST, ends at Tue 2021-03-02 16:07:26 PST. -- 1767a1768,1787 > Mar 02 16:06:54 Bag sudo[1683]: pam_unix(sudo:session): session closed for user root > Mar 02 16:06:54 Bag audit[1683]: USER_END pid=1683 uid=1000 auid=1000 ses=2 subj==unconfined msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' > Mar 02 16:06:54 Bag audit[1683]: CRED_DISP pid=1683 uid=1000 auid=1000 ses=2 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' > Mar 02 16:06:54 Bag kernel: audit: type=1106 audit(1614730014.921:129): pid=1683 uid=1000 auid=1000 ses=2 subj==unconfined msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' > Mar 02 16:06:54 Bag kernel: audit: type=1104 audit(1614730014.921:130): pid=1683 uid=1000 auid=1000 ses=2 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' > Mar 02 16:07:11 Bag rtkit-daemon[1175]: Supervising 2 threads of 1 processes of 1 users. > Mar 02 16:07:11 Bag rtkit-daemon[1175]: Successfully made thread 1695 of process 1172 owned by '1000' RT at priority 5. > Mar 02 16:07:11 Bag rtkit-daemon[1175]: Supervising 3 threads of 1 processes of 1 users. > Mar 02 16:07:13 Bag wpa_supplicant[740]: wlp2s0: CTRL-EVENT-BEACON-LOSS > Mar 02 16:07:26 Bag dbus-daemon[462]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.56' (uid=0 pid=1697 comm="sudo journalctl -b ") > Mar 02 16:07:26 Bag dbus-daemon[462]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found. > Mar 02 16:07:26 Bag sudo[1697]: pam_systemd_home(sudo:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found. > Mar 02 16:07:26 Bag audit[1697]: USER_ACCT pid=1697 uid=1000 auid=1000 ses=2 subj==unconfined msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="kira" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' > Mar 02 16:07:26 Bag audit[1697]: CRED_REFR pid=1697 uid=1000 auid=1000 ses=2 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' > Mar 02 16:07:26 Bag sudo[1697]: kira : TTY=pts/0 ; PWD=/home/kira/Desktop ; USER=root ; COMMAND=/usr/bin/journalctl -b > Mar 02 16:07:26 Bag kernel: audit: type=1101 audit(1614730046.278:131): pid=1697 uid=1000 auid=1000 ses=2 subj==unconfined msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="kira" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' > Mar 02 16:07:26 Bag kernel: audit: type=1110 audit(1614730046.278:132): pid=1697 uid=1000 auid=1000 ses=2 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' > Mar 02 16:07:26 Bag sudo[1697]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) > Mar 02 16:07:26 Bag audit[1697]: USER_START pid=1697 uid=1000 auid=1000 ses=2 subj==unconfined msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' > Mar 02 16:07:26 Bag kernel: audit: type=1105 audit(1614730046.281:133): pid=1697 uid=1000 auid=1000 ses=2 subj==unconfined msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'

journalctl -b after reinstalling: https://pastebin.com/UxvBKEhR

I also now after restarting have only ~/.config/pulse, still no ~/.pulse files exist
Headphones still dont work

6

PulseAudio deprecated use of files ~/.pulse and ~/.pulse-cookie many years ago

All user configuration files for Pulseaudio are stored in folder /.config/pulse/
To clear PulseAudio user configuration only requires deletion of the cookie and the database files

rm ~/.config/pulse/cookie ~/.config/pulse/*.tdb

Reinstalling pulseaudio with pacman should not be necessary. New configuration files will be created by PulseAudio after system reboot

The 3 pastebin links are showing message Error, this is a private paste or is pending moderation but I do not expect data from there to help much

PulseAudio data is very difficult to make sense of when posted in an unformatted state

Please post system information

inxi -Faz

and Pulseaudio Information

pacmd dump

and use the Preformatted text button </>

7 
inxi -Faz
System:
  Kernel: 5.11.1-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.1 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.11-x86_64 
  root=UUID=0b74ceb5-caf8-47e8-b63a-2b1120bb194f ro quiet apparmor=1 
  security=apparmor udev.log_priority=3 pcie_aspm.policy=performance 
  Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 
  dm: LightDM 1.30.0 Distro: Manjaro Linux 
Machine:
  Type: Convertible System: LENOVO product: 81SQ 
  v: Lenovo IdeaPad FLEX-14IWL serial: <filter> Chassis: type: 31 
  v: Lenovo IdeaPad FLEX-14IWL serial: <filter> 
  Mobo: LENOVO model: LNVNB161216 v: SDK0J40700 WIN serial: <filter> 
  UEFI: LENOVO v: AHCN32WW(V2.09) date: 07/11/2020 
Battery:
  ID-1: BAT1 charge: 15.6 Wh condition: 26.6/45.0 Wh (59%) volts: 15.5/15.4 
  model: 0x43 0x65 0x6C 0x78 0x70 0x65 0x PABAS0241231 type: Li-ion 
  serial: <filter> status: Discharging cycles: 583 
CPU:
  Info: Quad Core model: Intel Core i5-8265U bits: 64 type: MT MCP 
  arch: Kaby Lake note: check family: 6 model-id: 8E (142) stepping: C (12) 
  microcode: DE L2 cache: 6 MiB 
  flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx 
  bogomips: 28808 
  Speed: 800 MHz min/max: 400/3900 MHz Core speeds (MHz): 1: 800 2: 800 
  3: 800 4: 800 5: 801 6: 800 7: 800 8: 800 
  Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
  Type: l1tf status: Not affected 
  Type: mds status: Not affected 
  Type: meltdown status: Not affected 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling 
  Type: srbds mitigation: TSX disabled 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: Intel UHD Graphics 620 vendor: Lenovo driver: i915 v: kernel 
  bus ID: 00:02.0 chip ID: 8086:3ea0 class ID: 0300 
  Device-2: IMC Networks Integrated Camera type: USB driver: uvcvideo 
  bus ID: 1-6:2 chip ID: 13d3:56b2 class ID: 0e02 
  Display: x11 server: X.Org 1.20.10 driver: loaded: intel 
  unloaded: modesetting alternate: fbdev,vesa display ID: :0.0 screens: 1 
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
  s-diag: 582mm (22.9") 
  Monitor-1: eDP1 res: 1920x1080 hz: 60 dpi: 157 size: 310x170mm (12.2x6.7") 
  diag: 354mm (13.9") 
  OpenGL: renderer: Mesa Intel UHD Graphics 620 (WHL GT2) v: 4.6 Mesa 20.3.4 
  direct render: Yes 
Audio:
  Device-1: Intel Cannon Point-LP High Definition Audio vendor: Lenovo 
  driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci 
  bus ID: 00:1f.3 chip ID: 8086:9dc8 class ID: 0403 
  Sound Server: ALSA v: k5.11.1-1-MANJARO 
Network:
  Device-1: Realtek RTL8822BE 802.11a/b/g/n/ac WiFi adapter 
  vendor: Lenovo ThinkPad E595 driver: rtw_8822be v: N/A 
  modules: rtw88_8822be port: 3000 bus ID: 02:00.0 chip ID: 10ec:b822 
  class ID: 0280 
  IF: wlp2s0 state: up mac: <filter> 
Bluetooth:
  Device-1: Realtek RTL8822BE Bluetooth 4.2 Adapter type: USB driver: btusb 
  v: 0.8 bus ID: 1-10:4 chip ID: 0bda:b023 class ID: e001 serial: <filter> 
  Message: Required tool hciconfig not installed. Check --recommends 
Drives:
  Local Storage: total: 238.47 GiB used: 107.23 GiB (45.0%) 
  SMART Message: Required tool smartctl not installed. Check --recommends 
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: SK Hynix 
  model: HFS256GD9TNG-L3A0B size: 238.47 GiB block size: physical: 512 B 
  logical: 512 B speed: 31.6 Gb/s lanes: 4 rotation: SSD serial: <filter> 
  rev: 80030C10 temp: 33.9 C scheme: GPT 
Partition:
  ID-1: / raw size: 161.13 GiB size: 157.6 GiB (97.81%) 
  used: 107.19 GiB (68.0%) fs: ext4 dev: /dev/nvme0n1p5 maj-min: 259:5 
  ID-2: /boot/efi raw size: 260 MiB size: 256 MiB (98.46%) 
  used: 46 MiB (18.0%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 
Swap:
  Alert: No Swap data was found. 
Sensors:
  System Temperatures: cpu: 34.0 C mobo: N/A 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 244 Uptime: 6m wakeups: 4 Memory: 15.36 GiB 
  used: 1.81 GiB (11.8%) Init: systemd v: 247 Compilers: gcc: N/A Packages: 
  pacman: 1188 lib: 386 flatpak: 0 Shell: Bash v: 5.1.0 
  running in: xfce4-terminal inxi: 3.3.01

Pacmd dump

    ### Configuration dump generated at Wed Mar  3 09:56:15 2021

    load-module module-device-restore
    load-module module-stream-restore
    load-module module-card-restore
    load-module module-augment-properties
    load-module module-switch-on-port-available
    load-module module-udev-detect
    load-module module-alsa-card device_id="0" name="pci-0000_00_1f.3" card_name="alsa_card.pci-0000_00_1f.3" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
    load-module module-jackdbus-detect channels=2
    load-module module-bluetooth-policy
    load-module module-bluetooth-discover
    load-module module-bluez5-discover
    load-module module-dbus-protocol
    load-module module-native-protocol-unix
    load-module module-gsettings
    load-module module-default-device-restore
    load-module module-always-sink
    load-module module-intended-roles
    load-module module-suspend-on-idle
    load-module module-console-kit
    load-module module-systemd-login
    load-module module-position-event-sounds
    load-module module-role-cork
    load-module module-filter-heuristics
    load-module module-filter-apply
    load-module module-x11-publish display=:0.0 xauthority=/home/kira/.Xauthority
    load-module module-x11-xsmp display=:0.0 xauthority=/home/kira/.Xauthority session_manager=local/Bag:@/tmp/.ICE-unix/1136,unix/Bag:/tmp/.ICE-unix/1136
    load-module module-cli-protocol-unix

    set-sink-volume alsa_output.pci-0000_00_1f.3.analog-stereo 0xcccc
    set-sink-mute alsa_output.pci-0000_00_1f.3.analog-stereo no
    suspend-sink alsa_output.pci-0000_00_1f.3.analog-stereo yes

    set-source-volume alsa_output.pci-0000_00_1f.3.analog-stereo.monitor 0x10000
    set-source-mute alsa_output.pci-0000_00_1f.3.analog-stereo.monitor no
    suspend-source alsa_output.pci-0000_00_1f.3.analog-stereo.monitor yes

    set-card-profile alsa_card.pci-0000_00_1f.3 output:analog-stereo

    set-default-sink alsa_output.pci-0000_00_1f.3.analog-stereo
    set-default-source alsa_output.pci-0000_00_1f.3.analog-stereo.monitor

    ### EOF

UPDATE: For some reason, I was having some mic issues in discord, and I checked pulse audio and it showed no microphone, then I checked in HDA Jackretasking and it showed pin 0x16 as headphones. They work, for now, I have no issues as of now. Unsure why…

The only change since yesterday and today I have installed some intel drivers, none of which I think were audio related.

8

PulseAudio Profile is set for audio output only

set-card-profile alsa_card.pci-0000_00_1f.3 output:analog-stereo

The only available recording source is the monitor of the audio output

set-default-source alsa_output.pci-0000_00_1f.3.analog-stereo.monitor

This sink.monitor can record desktop audio, but if it was used for a VOIP call the caller would only hear desktop audio with their voice echoed back at them

I suggest you change the PulseAudio profile to allow audio capture

pacmd set-card-profile alsa_card.pci-0000_00_1f.3 output:analog-stereo+input:analog-stereo

And change the default source to the microphone source-input

pacmd set-default-source alsa_input.pci-0000_00_1f.3.analog-stereo

Your audio device is using the snd_hda_intel driver that does not support the internal digital array microphones
But you should be able to see the headset microphone available as an Input Device when it is plugged in - pavucontrol --tab=4

1 Like
9

ill keep this in mind if it breaks again, for now, it fixed itself. Thanks!

10

This topic was automatically closed 15 days after the last reply. New replies are no longer allowed.