HDMI macht Probleme bei Ton und Bild

Lehmeier · 28 January 2024 11:14

Hallo!

Ich habe ein älteres Notebook ( HP Pavilion G7, 4 GB ), von Win 7 auf Manjaro, umgestellt und möchte nun, Zoomkonferenzen,über einen Fernseher sehen. Dies funktioniert auch mit anderen Laptops gut.

Dafür habe ich das Notebook über ein HDMI-Kabel angeschlossen.
Dies funktioniert auch gut mit einem anderen Laptop.

Doch nun habe ich folgende Probleme :

Ich habe keinen Ton.
Das Bild ( trotz Vollbild ) nicht voll angezeigt wird. stattdessen wird der Hintergrund mit einem seltsamen Muster aufgefüllt.

So sollte es aussehen :

So sieht es aus :

Mein System ist :

inxi -Fxxxo
System:
  Host: HP-G7Manjaro-Laptop Kernel: 6.6.10-1-MANJARO arch: x86_64 bits: 64
    compiler: gcc v: 13.2.1 clocksource: tsc Desktop: Xfce v: 4.18.1 tk: Gtk
    v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7 dm: LightDM
    v: 1.32.0 Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: Hewlett-Packard product: HP Pavilion g7 Notebook PC
    v: 0592110000204620000620100 serial: <superuser required> Chassis: type: 10
    serial: <superuser required>
  Mobo: Hewlett-Packard model: 1672 v: 09.4C serial: <superuser required>
    BIOS: Insyde v: F.66 date: 01/24/2013
Battery:
  ID-1: BAT0 charge: 97.7 Wh (100.0%) condition: 97.7/97.7 Wh (100.0%)
    volts: 12.6 min: 11.1 model: Hewlett-Packard Primary type: Li-ion
    serial: N/A status: full
CPU:
  Info: dual core model: Intel Core i5-2410M bits: 64 type: MT MCP
    smt: enabled arch: Sandy Bridge rev: 7 cache: L1: 128 KiB L2: 512 KiB
    L3: 3 MiB
  Speed (MHz): avg: 1982 high: 2678 min/max: 800/2900 cores: 1: 2678 2: 1246
    3: 2227 4: 1780 bogomips: 18364
  Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
Graphics:
  Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics
    vendor: Hewlett-Packard driver: i915 v: kernel arch: Gen-6 ports:
    active: HDMI-A-1,LVDS-1 empty: DP-1,VGA-2 bus-ID: 00:02.0
    chip-ID: 8086:0116 class-ID: 0300
  Device-2: AMD Seymour [Radeon HD 6400M/7400M Series]
    vendor: Hewlett-Packard driver: radeon v: kernel arch: TeraScale-2 pcie:
    speed: 2.5 GT/s lanes: 8 ports: active: none empty: VGA-1 bus-ID: 01:00.0
    chip-ID: 1002:6760 class-ID: 0300 temp: 55.0 C
  Device-3: Chicony HP Integrated Webcam driver: uvcvideo type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 bus-ID: 2-1.5:3 chip-ID: 04f2:b249 class-ID: 0e02
    serial: SN0001
  Display: x11 server: X.org v: 1.21.1.10 compositor: xfwm v: 4.18.0 driver:
    X: loaded: modesetting,radeon alternate: fbdev,vesa dri: crocus,r600
    gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-size: <missing: xdpyinfo>
  Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Samsung serial: 16780800
    res: 1920x1080 hz: 60 dpi: 26 size: 1872x1053mm (73.7x41.46")
    diag: 1271mm (50.1") modes: max: 1920x1080 min: 720x400
  Monitor-2: LVDS-1 pos: primary model: Seiko Epson 0x3354 res: 1600x900
    hz: 60 dpi: 106 size: 382x215mm (15.04x8.46") diag: 438mm (17.3")
    modes: 1600x900
  API: EGL v: 1.5 hw: drv: intel crocus drv: amd r600 platforms: device: 0
    drv: r600 device: 1 drv: crocus device: 2 drv: swrast surfaceless: drv: r600
    x11: drv: crocus inactive: gbm,wayland
  API: OpenGL v: 4.5 compat-v: 3.3 vendor: intel mesa v: 23.3.3-manjaro1.1
    glx-v: 1.4 direct-render: yes renderer: Mesa Intel HD Graphics 3000 (SNB
    GT2) device-ID: 8086:0116
Audio:
  Device-1: Intel 6 Series/C200 Series Family High Definition Audio
    vendor: Hewlett-Packard 6 driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
    chip-ID: 8086:1c20 class-ID: 0403
  API: ALSA v: k6.6.10-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator
  Server-1: JACK v: 1.9.22 status: off
  Server-2: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
Network:
  Device-1: Ralink RT5390 Wireless 802.11n 1T/1R PCIe vendor: Hewlett-Packard
    U98Z077.00 Half-size Mini driver: rt2800pci v: 2.3.0 pcie: speed: 2.5 GT/s
    lanes: 1 bus-ID: 02:00.0 chip-ID: 1814:5390 class-ID: 0280
  IF: wlp2s0 state: up mac: c0:f8:da:99:d6:a3
  Device-2: Realtek RTL810xE PCI Express Fast Ethernet
    vendor: Hewlett-Packard driver: r8169 v: kernel pcie: speed: 2.5 GT/s
    lanes: 1 port: 3000 bus-ID: 03:00.0 chip-ID: 10ec:8136 class-ID: 0200
  IF: eno1 state: down mac: 2c:27:d7:d9:cd:5c
Drives:
  Local Storage: total: 953.87 GiB used: 82.01 GiB (8.6%)
  ID-1: /dev/sda vendor: Kingston model: SKC600 1024G size: 953.87 GiB
    speed: 6.0 Gb/s tech: SSD serial: 2023111700051 fw-rev: 4A0 scheme: GPT
Partition:
  ID-1: / size: 143.13 GiB used: 24.67 GiB (17.2%) fs: ext4 dev: /dev/sda4
  ID-2: /home size: 784.98 GiB used: 56.69 GiB (7.2%) fs: ext4
    dev: /dev/sda1
Swap:
  ID-1: swap-1 type: partition size: 8.79 GiB used: 658 MiB (7.3%)
    priority: -2 dev: /dev/sda2
Unmounted:
  ID-1: /dev/sda3 size: 8 MiB fs: <superuser required>
Sensors:
  System Temperatures: cpu: 65.0 C mobo: N/A gpu: radeon temp: 55.0 C
  Fan Speeds (rpm): N/A
Info:
  Processes: 215 Uptime: 36m wakeups: 0 Memory: total: 4 GiB
  available: 3.78 GiB used: 3.06 GiB (81.1%) Init: systemd v: 255
  default: graphical Compilers: gcc: 13.2.1 clang: 16.0.6 Packages: 1400
  pm: pacman pkgs: 1394 pm: flatpak pkgs: 6 Shell: Bash v: 5.2.21
  running-in: xfce4-terminal inxi: 3.3.31

Wer kann mir sagen wie ich es richtig zum laufen bekomme?

Vielen Dank im voraus .

MfG R.Lehmeier

megavolt · 28 January 2024 15:36

Hello @Lehmeier

Lehmeier:

  Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Samsung serial: 16780800
    res: 1920x1080 hz: 60 dpi: 26 size: 1872x1053mm (73.7x41.46")
    diag: 1271mm (50.1") modes: max: 1920x1080 min: 720x400
  Monitor-2: LVDS-1 pos: primary model: Seiko Epson 0x3354 res: 1600x900
    hz: 60 dpi: 106 size: 382x215mm (15.04x8.46") diag: 438mm (17.3")
    modes: 1600x900

Kann es vielleicht sein, dass deine HDMI Ausgabe eine höhere Auflösung hat und du den Bildschirm spiegelst und nicht erweiterst?

LVDS → 1600x900
HDMI → 1920x1080

Jedenfalls, stell bei beiden Monitoren die selbe Auflösung ein und es sollte funktionieren.

Lehmeier · 28 January 2024 22:10

Der Bildschirm ( Samsung 50" ) kann zwar 4K wurde aber automatisch auf 1600 x 900 eingestellt nachdem ich ( Im Programm " Anzeige " ) bei " Bildschirme spiegeln " einen Haken gesetzt und unter " Erweitert => Bildschirme verbinden " folgende Änderung vornahm.

Bei " Wenn neue Bildschirme angeschlossen werden " habe ich nun " Erweitern ".

Ich ging immer davon aus das das Signal auf HD hochgerechnet wird - da lag ich wohl falsch.

Jetzt muß nur noch der Ton wieder kommen.
Woran kann es wohl liegen?

Wenn ich es richtig sehe dann verwende ich PulseAudio, doch finde ich keine Möglichkeit den Ton wiederzubekommen. Kann es ein Treiberproblem sein oder tritt so etwas öfter auf ?

Wer hat noch Ideen woran es liegen könnte.

Lehmeier · 29 January 2024 11:43

So nun mal etwas genauer :

Ich habe wohl kein Pulseaudio sondern Pipewire im Einsatz. Tut mir leid das ich hier Mist erzählt habe.

Laut dem Pamac sind bei mir folgende Pakete installiert:
pipewire
pipewire-alsa
pipewire-audio
pipewire-pulse
pipewire-session-manager
pipewire-jack
wireplumber

Von Pulseaudio ist nichts installiert, ausser pipewire-pulse.

Bei meiner Suche stieß ich auch auf diesen Forumseintrag: [SOLVED] Pipewire-pulse no sound on HDMI / Newbie Corner / Arch Linux Forums

Da ich nicht weiß inwieweit diese Lösung auf mich zutrifft, habe ich nur mal die dortigen Abfragen übernommen - vielleicht helfen sie ja das Problem einzugrenzen.

sudo fuser -v /dev/snd/*
[sudo] Passwort für viviane: 
                     BEN.        PID ZUGR.  BEFEHL
/dev/snd/controlC0:  viviane    7040 F.... wireplumber
/dev/snd/seq:        viviane    7037 F.... pipewire

pactl list cards
Card #44
	Name: alsa_card.pci-0000_00_1b.0
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.card.longname = "HDA Intel PCH at 0xc3600000 irq 31"
		api.alsa.card.name = "HDA Intel PCH"
		api.alsa.path = "hw:0"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:1b.0"
		device.description = "Internes Audio"
		device.enum.api = "udev"
		device.form_factor = "internal"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_00_1b.0"
		device.nick = "HDA Intel PCH"
		device.plugged.usec = "23712744"
		device.product.id = "0x1c20"
		device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		media.class = "Audio/Device"
		factory.id = "14"
		client.id = "34"
		object.id = "44"
		object.serial = "44"
		object.path = "alsa:pcm:0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xc3600000 irq 31"
		alsa.driver_name = "snd_hda_intel"
		device.string = "0"
	Profiles:
		off: Aus (sinks: 0, sources: 0, priority: 0, available: yes)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
		output:analog-stereo: Analog Stereo-Ausgabe (sinks: 1, sources: 0, priority: 6500, available: yes)
		output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI)-Ausgabe + Analog Stereo-Eingabe (sinks: 1, sources: 1, priority: 5965, available: yes)
		output:hdmi-stereo: Digital Stereo (HDMI)-Ausgabe (sinks: 1, sources: 0, priority: 5900, available: yes)
		output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI)-Ausgabe + Analog Stereo-Eingabe (sinks: 1, sources: 1, priority: 865, available: yes)
		output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI)-Ausgabe + Analog Stereo-Eingabe (sinks: 1, sources: 1, priority: 865, available: yes)
		output:hdmi-surround: Digital Surround 5.1 (HDMI)-Ausgabe (sinks: 1, sources: 0, priority: 800, available: yes)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI)-Ausgabe (sinks: 1, sources: 0, priority: 800, available: yes)
		input:analog-stereo: Analog Stereo-Eingabe (sinks: 0, sources: 1, priority: 65, available: yes)
		pro-audio: Pro Audio (sinks: 2, sources: 1, priority: 1, available: yes)
	Active Profile: output:analog-stereo+input:analog-stereo
	Ports:
		analog-input-internal-mic: Internes Mikrofon (type: Mic, priority: 8900, latency offset: 0 usec, availability group: Legacy 1, availability unknown)
			Properties:
				port.type = "mic"
				port.availability-group = "Legacy 1"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "0"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo
		analog-input-mic: Mikrofon (type: Mic, priority: 8700, latency offset: 0 usec, availability group: Legacy 2, not available)
			Properties:
				port.type = "mic"
				port.availability-group = "Legacy 2"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "1"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo
		analog-output-speaker: Lautsprecher (type: Speaker, priority: 10000, latency offset: 0 usec, availability group: Legacy 3, availability unknown)
			Properties:
				port.type = "speaker"
				port.availability-group = "Legacy 3"
				device.icon_name = "audio-speakers"
				card.profile.port = "2"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
		analog-output-headphones: Kopfhörer (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 4, not available)
			Properties:
				port.type = "headphones"
				port.availability-group = "Legacy 4"
				device.icon_name = "audio-headphones"
				card.profile.port = "3"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 5, available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 5"
				device.icon_name = "video-display"
				card.profile.port = "4"
				device.product.name = "SAMSUNG"
			Part of profile(s): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71, output:hdmi-surround71+input:analog-stereo

pactl list sinks
Sink #49
	State: SUSPENDED
	Name: alsa_output.pci-0000_00_1b.0.analog-stereo
	Description: Internes Audio Analog Stereo
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	Base Volume: 65536 / 100% / 0,00 dB
	Monitor Source: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.class = "generic"
		alsa.device = "0"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "92HD81B1X5 Analog"
		alsa.long_card_name = "HDA Intel PCH at 0xc3600000 irq 31"
		alsa.name = "92HD81B1X5 Analog"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		api.alsa.card.longname = "HDA Intel PCH at 0xc3600000 irq 31"
		api.alsa.card.name = "HDA Intel PCH"
		api.alsa.path = "front:0"
		api.alsa.pcm.card = "0"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "4"
		device.api = "alsa"
		device.class = "sound"
		device.id = "44"
		device.profile.description = "Analog Stereo"
		device.profile.name = "analog-stereo"
		device.routes = "2"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Internes Audio"
		node.name = "alsa_output.pci-0000_00_1b.0.analog-stereo"
		node.nick = "92HD81B1X5 Analog"
		node.pause-on-idle = "false"
		object.path = "alsa:pcm:0:front:0:playback"
		priority.driver = "1009"
		priority.session = "1009"
		factory.id = "18"
		clock.quantum-limit = "8192"
		client.id = "34"
		node.driver = "true"
		factory.mode = "merge"
		audio.adapt.follower = ""
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "49"
		object.serial = "49"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:1b.0"
		device.enum.api = "udev"
		device.form_factor = "internal"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_00_1b.0"
		device.nick = "HDA Intel PCH"
		device.plugged.usec = "23712744"
		device.product.id = "0x1c20"
		device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		device.string = "0"
	Ports:
		analog-output-speaker: Lautsprecher (type: Speaker, priority: 10000, availability group: Legacy 3, availability unknown)
		analog-output-headphones: Kopfhörer (type: Headphones, priority: 9900, availability group: Legacy 4, not available)
	Active Port: analog-output-speaker
	Formats:
		pc

pactl list sink-inputs
Sink Input #87
	Driver: PipeWire
	Owner Module: n/a
	Client: 58
	Sink: 49
	Sample Specification: float32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Format: pcm, format.sample_format = "\"float32le\""  format.rate = "48000"  format.channels = "2"  format.channel_map = "\"front-left,front-right\""
	Corked: yes
	Mute: no
	Volume: front-left: 53577 /  82% / -5,25 dB,   front-right: 53577 /  82% / -5,25 dB
	        balance 0,00
	Buffer Latency: 0 usec
	Sink Latency: 0 usec
	Resample method: PipeWire
	Properties:
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "Firefox"
		application.process.id = "1302"
		application.process.user = "viviane"
		application.process.host = "HP-G7Manjaro-Laptop"
		application.process.binary = "firefox"
		application.language = "de_DE.utf8"
		window.x11.display = ":0.0"
		application.process.machine_id = "ab9df9d514024f818623fda6b3612cfa"
		application.process.session_id = "2"
		media.name = "Ibiza Summer Mix 2024 🍓 Best Of Tropical Deep House Music Chill Out Mix 2024 🍓 Chillout Lounge #24 - YouTube"
		node.rate = "1/48000"
		node.latency = "3600/48000"
		stream.is-live = "true"
		node.name = "Firefox"
		node.want-driver = "true"
		node.autoconnect = "true"
		media.class = "Stream/Output/Audio"
		adapt.follower.spa-node = ""
		object.register = "false"
		factory.id = "6"
		clock.quantum-limit = "8192"
		factory.mode = "split"
		audio.adapt.follower = ""
		library.name = "audioconvert/libspa-audioconvert"
		client.id = "58"
		object.id = "59"
		object.serial = "87"
		pulse.attr.maxlength = "4194304"
		pulse.attr.tlength = "48000"
		pulse.attr.prebuf = "38408"
		pulse.attr.minreq = "9600"
		module-stream-restore.id = "sink-input-by-application-name:Firefox"

Wenn ihr noch etwas braucht dann sagt es.

Lehmeier · 29 January 2024 16:53

Nach vielem suchen habe ich endlich die Lösung für das Tonproblem gefunden.

Ich ging auf das Lautstärkesymbol, dort auf Tonmischer => Konfiguration und habe dort ein HDMI-Profil ausgewählt. Schon hatte ich den gewünschten Ton.

Nicht Plug and Play aber es funktioniert.

Hier scheint es noch Konfigurationsbedarf zu geben - damit so etwas out of the Box klappt. Doch nun kann ich diesen Part endlich abschließen.

Vielen Dank für eure Hilfe.

system · 1 February 2024 12:54

This topic was automatically closed 36 hours after the last reply. New replies are no longer allowed.