Team,
Since the past few updates I have been having an issue where, at any point in the run time my screens go black and then gnome fails to load monitors. Looking into the kernel issues I get lots of:
Mar 28 12:30:19 PC kernel: [drm:nv_drm_gem_alloc_nvkms_memory_ioctl [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00000a00] Failed to allocate NVKMS memory for GEM object
Mar 28 12:30:19 PC kernel: [drm:nv_drm_gem_alloc_nvkms_memory_ioctl [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00000a00] Failed to allocate NVKMS memory for GEM object
System:
Kernel: 6.12.19-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.12-x86_64
root=UUID=dd02677b-7781-4021-9751-967afb3d3e96 rw quiet apparmor=1
security=apparmor resume=UUID=d19c700f-d233-48be-84b2-f18192e17888
udev.log_priority=3
Desktop: GNOME v: 47.5 tk: GTK v: 3.24.49 wm: gnome-shell
tools: gsd-screensaver-proxy dm: GDM v: 47.0 Distro: Manjaro
base: Arch Linux
Machine:
Type: Desktop System: Gigabyte product: B450M DS3H WIFI v: N/A
serial: <superuser required>
Mobo: Gigabyte model: B450M DS3H WIFI-CF v: x.x
serial: <superuser required> uuid: <superuser required>
UEFI: American Megatrends v: F51c Y1 date: 04/08/2020
Battery:
Device-1: hidpp_battery_3 model: Logitech Wireless Keyboard ERGO K860
serial: <filter> charge: 100% (should be ignored) rechargeable: yes
status: discharging
Memory:
System RAM: total: 32 GiB available: 31.29 GiB used: 4.72 GiB (15.1%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 128 GiB slots: 4 modules: 4 EC: None
max-module-size: 32 GiB note: est.
Device-1: Channel-A DIMM 0 type: DDR4 detail: synchronous unbuffered
(unregistered) size: 8 GiB speed: 2133 MT/s volts: note: check curr: 1
min: 1 max: 1 width (bits): data: 64 total: 64 manufacturer: N/A
part-no: CL16-18-18 D4-3000 serial: N/A
Device-2: Channel-A DIMM 1 type: DDR4 detail: synchronous unbuffered
(unregistered) size: 8 GiB speed: 2133 MT/s volts: note: check curr: 1
min: 1 max: 1 width (bits): data: 64 total: 64 manufacturer: G.Skill
part-no: F4-3000C15-8GVRB serial: N/A
Device-3: Channel-B DIMM 0 type: DDR4 detail: synchronous unbuffered
(unregistered) size: 8 GiB speed: 2133 MT/s volts: note: check curr: 1
min: 1 max: 1 width (bits): data: 64 total: 64 manufacturer: N/A
part-no: CL16-18-18 D4-3000 serial: N/A
Device-4: Channel-B DIMM 1 type: DDR4 detail: synchronous unbuffered
(unregistered) size: 8 GiB speed: 2133 MT/s volts: note: check curr: 1
min: 1 max: 1 width (bits): data: 64 total: 64 manufacturer: G.Skill
part-no: F4-3000C15-8GVRB serial: N/A
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: AMD Ryzen 7 3700X bits: 64 type: MT MCP arch: Zen 2 gen: 2
level: v3 note: check built: 2020-22 process: TSMC n7 (7nm)
family: 0x17 (23) model-id: 0x71 (113) stepping: 0 microcode: 0x8701034
Topology: cpus: 1x dies: 1 clusters: 1 cores: 8 threads: 16 tpc: 2
smt: enabled cache: L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB
desc: 8x512 KiB L3: 32 MiB desc: 2x16 MiB
Speed (MHz): avg: 2200 min/max: 2200/4426 boost: enabled scaling:
driver: acpi-cpufreq governor: schedutil cores: 1: 2200 2: 2200 3: 2200
4: 2200 5: 2200 6: 2200 7: 2200 8: 2200 9: 2200 10: 2200 11: 2200 12: 2200
13: 2200 14: 2200 15: 2200 16: 2200 bogomips: 115026
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid
f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibs
irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe
msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae
pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb
pfthreshold pge pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a
rdtscp rep_good sep sev sev_es sha_ni skinit smap smca smep ssbd sse sse2
sse4_1 sse4_2 sse4a ssse3 stibp succor svm_lock syscall tce topoext tsc
tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme vmmcall
wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt xtopology
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP
protection
Type: spec_rstack_overflow mitigation: Safe RET
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; STIBP:
always-on; RSB filling; PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GA104 [GeForce RTX 3070] vendor: Micro-Star MSI
driver: nvidia v: 570.133.07 alternate: nouveau,nvidia_drm
non-free: 550/565.xx+ status: current (as of 2025-01; EOL~2026-12-xx)
arch: Ampere code: GAxxx process: TSMC n7 (7nm) built: 2020-2023 pcie:
gen: 1 speed: 2.5 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s ports:
active: none off: DP-1,DP-2,DP-3 empty: HDMI-A-1 bus-ID: 0a:00.0
chip-ID: 10de:2484 class-ID: 0300
Device-2: Logitech C920 PRO HD Webcam driver: snd-usb-audio,uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-3.2:25
chip-ID: 046d:08e5 class-ID: 0102 serial: <filter>
Display: wayland server: X.org v: 1.21.1.16 with: Xwayland v: 24.1.6
compositor: gnome-shell driver: X: loaded: N/A failed: nvidia
gpu: nvidia,nvidia-nvswitch display-ID: 0
Monitor-1: DP-1 model: Samsung LU28R55 serial: <filter> built: 2022
res: 3840x2160 dpi: 154 gamma: 1.2 chroma: red: x: 0.678 y: 0.314 green:
x: 0.267 y: 0.620 blue: x: 0.145 y: 0.059 white: x: 0.314 y: 0.329
size: 632x360mm (24.88x14.17") diag: 727mm (28.6") ratio: 16:9
modes: 3840x2160, 2560x1440, 1920x1080, 1680x1050, 1600x900, 1280x1024,
1440x900, 1280x800, 1152x864, 1280x720, 1024x768, 800x600, 720x576,
720x480, 640x480
EDID-Warnings: 1: parse_edid: unhandled CEA mode 95
Monitor-2: DP-2 model: Samsung LU28R55 serial: <filter> built: 2022
res: 3840x2160 dpi: 154 gamma: 1.2 chroma: red: x: 0.678 y: 0.314 green:
x: 0.267 y: 0.620 blue: x: 0.145 y: 0.059 white: x: 0.314 y: 0.329
size: 632x360mm (24.88x14.17") diag: 727mm (28.6") ratio: 16:9
modes: 3840x2160, 2560x1440, 1920x1080, 1680x1050, 1600x900, 1280x1024,
1440x900, 1280x800, 1152x864, 1280x720, 1024x768, 800x600, 720x576,
720x480, 640x480
EDID-Warnings: 1: parse_edid: unhandled CEA mode 95
Monitor-3: DP-3 model: Samsung LU28R55 serial: <filter> built: 2022
res: 3840x2160 dpi: 154 gamma: 1.2 chroma: red: x: 0.678 y: 0.314 green:
x: 0.267 y: 0.620 blue: x: 0.145 y: 0.059 white: x: 0.314 y: 0.329
size: 632x360mm (24.88x14.17") diag: 727mm (28.6") ratio: 16:9
modes: 3840x2160, 2560x1440, 1920x1080, 1680x1050, 1600x900, 1280x1024,
1440x900, 1280x800, 1152x864, 1280x720, 1024x768, 800x600, 720x576,
720x480, 640x480
EDID-Warnings: 1: parse_edid: unhandled CEA mode 95
API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia gbm:
drv: nvidia surfaceless: drv: nvidia wayland: drv: nvidia x11: drv: nvidia
API: OpenGL v: 4.6.0 vendor: nvidia v: 570.133.07 glx-v: 1.4
direct-render: yes renderer: NVIDIA GeForce RTX 3070/PCIe/SSE2
memory: 7.81 GiB display-ID: :0.0
Info: Tools: api: eglinfo,glxinfo gpu: nvidia-settings,nvidia-smi
x11: xprop,xrandr
Audio:
Device-1: NVIDIA GA104 High Definition Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s bus-ID: 0a:00.1 chip-ID: 10de:228b
class-ID: 0403
Device-2: Advanced Micro Devices [AMD] Starship/Matisse HD Audio
vendor: Gigabyte driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s
lanes: 16 bus-ID: 0c:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-3: Actions G06-BT driver: hid-generic,snd-usb-audio,usbhid
type: USB rev: 1.1 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-4:4
chip-ID: 10d6:dd00 class-ID: 0102 serial: <filter>
Device-4: Logitech C920 PRO HD Webcam driver: snd-usb-audio,uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-3.2:25
chip-ID: 046d:08e5 class-ID: 0102 serial: <filter>
API: ALSA v: k6.12.19-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 1.4.1 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: Gigabyte driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: f000 bus-ID: 05:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp5s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
Device-2: Intel Dual Band Wireless-AC 3168NGW [Stone Peak] driver: iwlwifi
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 07:00.0
chip-ID: 8086:24fb class-ID: 0280
IF: wlp7s0 state: down mac: <filter>
Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
WAN IP: <filter>
Bluetooth:
Device-1: Intel Wireless-AC 3168 Bluetooth driver: btusb v: 0.8 type: USB
rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-7:5 chip-ID: 8087:0aa7
class-ID: e001
Report: rfkill ID: hci0 rfk-id: 0 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 16.39 TiB used: 7.55 TiB (46.0%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Intel model: SSDPEKNW010T8
size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: 004C temp: 32.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 1TB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 4B6Q scheme: GPT
ID-3: /dev/sdb maj-min: 8:16 vendor: Western Digital
model: WD140EDGZ-11B1PA0 size: 12.73 TiB block-size: physical: 4096 B
logical: 512 B type: USB rev: 3.1 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1
tech: HDD rpm: 7200 serial: <filter> fw-rev: 1030 scheme: GPT
ID-4: /dev/sdc maj-min: 8:32 vendor: Seagate model: ST2000LM007-1R8174
size: 1.82 TiB block-size: physical: 4096 B logical: 512 B type: USB
rev: 2.1 spd: 480 Mb/s lanes: 1 mode: 2.0 tech: HDD rpm: 5400
serial: <filter> scheme: MBR
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 944.77 GiB size: 928.87 GiB (98.32%)
used: 333.71 GiB (35.9%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2
label: N/A uuid: dd02677b-7781-4021-9751-967afb3d3e96
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 288 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: N/A
uuid: B724-9B4A
ID-3: /run/media/bananasquash/Elements raw-size: 12.73 TiB
size: 12.63 TiB (99.20%) used: 5.7 TiB (45.1%) fs: ext4 dev: /dev/sdb1
maj-min: 8:17 label: Elements uuid: 7250e250-2222-437b-b09b-9d2b6a004ef7
ID-4: /run/media/bananasquash/SP PHD U3 raw-size: 1.82 TiB
size: 1.82 TiB (99.98%) used: 1.53 TiB (83.9%) fs: vfat dev: /dev/sdc1
maj-min: 8:33 label: SP PHD U3 uuid: 1014-1F47
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: partition size: 8.8 GiB used: 1024 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p3 maj-min: 259:3 label: swap
uuid: d19c700f-d233-48be-84b2-f18192e17888
Unmounted:
ID-1: /dev/sda1 maj-min: 8:1 size: 300 MiB fs: vfat label: NO_LABEL
uuid: EA35-C936
ID-2: /dev/sda2 maj-min: 8:2 size: 922.42 GiB fs: ext4 label: N/A
uuid: dd6f4e5e-db1e-41fc-a8a0-abfd49e930f7
ID-3: /dev/sda3 maj-min: 8:3 size: 8.8 GiB fs: swap label: N/A
uuid: a301dd4a-869b-479d-b3ff-f9e69ec8b5d9
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 10 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 1-1:2 info: Saitek PLC Flight Pro Multi Panel type: HID
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 150mA chip-ID: 06a3:0d06 class-ID: 0300
Device-2: 1-2:3 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E ASM1153
3Gb/s ASM1153E bridge type: mass storage driver: usb-storage interfaces: 1
rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0
chip-ID: 174c:55aa class-ID: 0806 serial: <filter>
Device-3: 1-4:4 info: Actions G06-BT type: HID,audio
driver: hid-generic,snd-usb-audio,usbhid interfaces: 4 rev: 1.1
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
chip-ID: 10d6:dd00 class-ID: 0102 serial: <filter>
Device-4: 1-7:5 info: Intel Wireless-AC 3168 Bluetooth type: bluetooth
driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
mode: 1.1 power: 100mA chip-ID: 8087:0aa7 class-ID: e001
Device-5: 1-8:6 info: Integrated Express IT8297 RGB LED Controller
type: keyboard driver: hid-generic,usbhid interfaces: 1 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
chip-ID: 048d:8297 class-ID: 0301
Hub-2: 2-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-4: 3-2:2 info: Hitachi ports: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 chip-ID: 045b:0209 class-ID: 0900
Hub-5: 3-2.1:4 info: Hitachi ports: 4 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 045b:0209
class-ID: 0900
Device-1: 3-2.1.2:8 info: Saitek PLC Pro Flight Rudder Pedals type: HID
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 100mA chip-ID: 06a3:0763 class-ID: 0300
Device-2: 3-2.1.3:10 info: Mad Catz X-55 Rhino Stick type: HID
driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 80mA chip-ID: 0738:2215 class-ID: 0300
serial: <filter>
Device-3: 3-2.2:6 info: Natural Point TrackIR 5 Pro Head Tracker type: N/A
driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
mode: 1.1 power: 366mA chip-ID: 131d:0158 class-ID: 0000
Device-4: 3-2.4:9 info: Saitek PLC Pro Flight Radio Panel type: HID
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 100mA chip-ID: 06a3:0d05 class-ID: 0300
Hub-6: 3-3:24 info: Huasheng USB2.0 HUB ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 214b:7250 class-ID: 0900
Device-1: 3-3.2:25 info: Logitech C920 PRO HD Webcam type: video,audio
driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
chip-ID: 046d:08e5 class-ID: 0102 serial: <filter>
Device-2: 3-3.3:26 info: Logitech Unifying Receiver
type: keyboard,mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3
rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 98mA
chip-ID: 046d:c52b class-ID: 0300
Device-3: 3-3.4:27 info: Logitech Logi Bolt Receiver
type: keyboard,mouse,HID driver: hid-generic,usbhid interfaces: 3 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 98mA
chip-ID: 046d:c548 class-ID: 0300
Device-4: 3-4:5 info: Mad Catz X-55 Rhino Throttle type: HID
driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 50mA chip-ID: 0738:a215 class-ID: 0300
serial: <filter>
Hub-7: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Device-1: 4-1:2 info: Western Digital Elements Desktop (WDBWLG)
type: mass storage driver: usb-storage interfaces: 1 rev: 3.1
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 8mA
chip-ID: 1058:25a3 class-ID: 0806 serial: <filter>
Sensors:
System Temperatures: cpu: 50.0 C mobo: 28.0 C
Fan Speeds (rpm): N/A
Repos:
Packages: pm: pacman pkgs: 1347 libs: 390 tools: gnome-software,pamac,yay
pm: flatpak pkgs: 0
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://ziply.mm.fcix.net/manjaro/stable/$repo/$arch
2: http://ftp.snt.utwente.nl/pub/linux/manjaro/stable/$repo/$arch
3: http://manjaro.mirrors.uk2.net/stable/$repo/$arch
4: https://mirror.easyname.at/manjaro/stable/$repo/$arch
5: https://mirror.netcologne.de/manjaro/stable/$repo/$arch
6: https://ftp.linux.org.tr/manjaro/stable/$repo/$arch
7: https://gsl-syd.mm.fcix.net/manjaro/stable/$repo/$arch
8: https://manjaro.repo.cure.edu.uy/stable/$repo/$arch
Processes:
CPU top: 5 of 441
1: cpu: 100% command: ps pid: 23992 mem: 3.75 MiB (0.0%)
2: cpu: 5.5% command: brave pid: 21934 mem: 258.9 MiB (0.8%)
3: cpu: 4.8% command: brave pid: 21536 mem: 274.9 MiB (0.8%)
4: cpu: 3.8% command: gnome-system-monitor pid: 18111
mem: 227.6 MiB (0.7%)
5: cpu: 2.7% command: gnome-shell pid: 7904 mem: 651.3 MiB (2.0%)
Memory top: 5 of 441
1: mem: 651.3 MiB (2.0%) command: gnome-shell pid: 7904 cpu: 2.7%
2: mem: 532.7 MiB (1.6%) command: steamwebhelper pid: 9665 cpu: 1.6%
3: mem: 460.8 MiB (1.4%) command: brave pid: 8587 cpu: 1.0%
4: mem: 382.4 MiB (1.1%) command: ./steamwebhelper pid: 9573 cpu: 0.4%
5: mem: 278.6 MiB (0.8%) command: brave pid: 8964 cpu: 0.3%
Info:
Processes: 441 Power: uptime: 1h 30m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 12.49 GiB services: gsd-power,
power-profiles-daemon, upowerd Init: systemd v: 257 default: graphical
tool: systemctl
Compilers: gcc: 14.2.1 Shell: Bash v: 5.2.37 running-in: gnome-terminal
inxi: 3.3.37
I have a RTX3070 and when monitoring the vram, it doesn’t come above 80% vram, but am still getting this. Is this a known issue on 570? Seems to be since updating at some point here in March. Prior to 3/7 I was just fine, did updates a few weeks later after moving and suddenly am having this issue across multiple applications. Any help in troubleshooting or known solutions would be great!
Regards.
