I had linux on this lappy for many years. It was all working up until 8 months ago when after an update it developed a intermittent fault of not going to sleep properly. After 8 months of trying to figure out why i decided to just try a new installation, and here we are with multipule instalations and more problems than i started with 
.
I was unaware.
Not tried ubuntu for a long time, however i did switch back to my sda1 installation of Manjaro just to check and my suspicions were right, it seems that all 3 of my profiles of Manjaro are doing the same thing during login. Now it may just be that i never noticed before because i usually only have one user account and that auto login so i wouldn’t notice. Not sure on that one.
I installed with open drivers.
Not sure what this means, on this installation all iv done is tweak the appearance and installed a couple of minor things & fully update,
System:
Kernel: 5.10.30-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64
root=UUID=c0628b7a-2f31-4e76-9eef-6dda7407ac6f rw
Desktop: KDE Plasma 5.21.4 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: Dell product: Inspiron 5767 v: N/A serial: <filter>
Chassis: type: 9 serial: <filter>
Mobo: Dell model: 03XWWJ v: A00 serial: <filter> UEFI-[Legacy]: Dell
v: 1.0.0 date: 07/14/2016
Battery:
ID-1: BAT0 charge: 42.0 Wh (100.0%) condition: 42.0/42.0 Wh (100.0%)
volts: 12.4 min: 11.4 model: Samsung SDI DELL FC92N67 type: Li-ion
serial: <filter> status: Full
Memory:
RAM: total: 15.46 GiB used: 3.04 GiB (19.6%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: Dual Core model: Intel Core i5-7200U bits: 64 type: MT MCP
arch: Amber/Kaby Lake note: check family: 6 model-id: 8E (142) stepping: 9
microcode: DE cache: L2: 3 MiB bogomips: 21599
Speed: 1464 MHz min/max: 400/3100 MHz Core speeds (MHz): 1: 1464 2: 1056
3: 2208 4: 1578
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon art
avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid
cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est
f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht hwp hwp_act_window
hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid invpcid_single lahf_lm lm
mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat
pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts
rdrand rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1
sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt
xsaves xtopology xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel HD Graphics 620 vendor: Dell driver: i915 v: kernel
bus-ID: 00:02.0 chip-ID: 8086:5916 class-ID: 0300
Device-2: Microdia Integrated_Webcam_HD type: USB driver: uvcvideo
bus-ID: 1-5:2 chip-ID: 0c45:6a06 class-ID: 0e02
Display: x11 server: X.Org 1.20.11 compositor: kwin_x11 driver:
loaded: intel unloaded: modesetting alternate: fbdev,vesa display-ID: :0
screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: eDP1 res: 1920x1080 hz: 60 dpi: 128 size: 380x210mm (15.0x8.3")
diag: 434mm (17.1")
OpenGL: renderer: Mesa Intel HD Graphics 620 (KBL GT2) v: 4.6 Mesa 21.0.2
direct render: Yes
Audio:
Device-1: Intel Sunrise Point-LP HD Audio vendor: Dell driver: snd_hda_intel
v: kernel alternate: snd_soc_skl bus-ID: 00:1f.3 chip-ID: 8086:9d71
class-ID: 0403
Sound Server-1: ALSA v: k5.10.30-1-MANJARO running: yes
Sound Server-2: sndio v: N/A running: no
Sound Server-3: JACK v: 0.125.0 running: no
Sound Server-4: PulseAudio v: 14.2 running: yes
Sound Server-5: PipeWire v: 0.3.25 running: yes
Network:
Device-1: Intel Wireless 3165 driver: iwlwifi v: kernel port: f040
bus-ID: 01:00.0 chip-ID: 8086:3165 class-ID: 0280
IF: wlp1s0 state: up mac: <filter>
IP v4: <filter> type: noprefixroute scope: global broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
Device-2: Realtek RTL810xE PCI Express Fast Ethernet vendor: Dell
driver: r8169 v: kernel port: e000 bus-ID: 02:00.0 chip-ID: 10ec:8136
class-ID: 0200
IF: enp2s0 state: down mac: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8
bus-ID: 1-8:4 chip-ID: 8087:0a2a class-ID: e001
Report: rfkill ID: hci0 rfk-id: 4 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
sh: -c: line 1: syntax error near unexpected token `('
sh: -c: line 1: `/sbin/blockdev --getbsz /dev/volume(sda1) 2>/dev/null'
sh: -c: line 1: syntax error near unexpected token `('
sh: -c: line 1: `/sbin/blockdev --getbsz /dev/linux-backup(sda1) 2>/dev/null'
Drives:
Local Storage: total: 931.51 GiB used: 252.79 GiB (27.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 1TB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
rotation: SSD serial: <filter> rev: 3B6Q scheme: MBR
Optical-1: /dev/sr0 vendor: PLDS model: DVD+-RW DU-8A5LH rev: 6D11
dev-links: cdrom
Features: speed: 24 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
ID-1: / raw-size: 623 GiB size: 612.22 GiB (98.27%) used: 252.79 GiB (41.3%)
fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: N/A
uuid: c0628b7a-2f31-4e76-9eef-6dda7407ac6f
ID-2: /run/media/user/NAS raw-size: N/A size: 1.82 TiB
used: 177.9 GiB (9.5%) fs: cifs dev: /dev/volume(sda1) label: N/A uuid: N/A
ID-3: /run/media/user/backups raw-size: N/A size: 1.82 TiB
used: 177.9 GiB (9.5%) fs: cifs dev: /dev/linux-backup(sda1) label: N/A
uuid: N/A
Swap:
Kernel: swappiness: 20 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 16 GiB used: 0 KiB (0.0%) priority: -2
file: /mnt/16GB.swap
Unmounted:
ID-1: /dev/sda2 maj-min: 8:2 size: 308.51 GiB fs: ext4 label: N/A
uuid: bfe48f69-800c-4332-b8ea-0df162b1710d
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 12 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-5:2 info: Microdia Integrated_Webcam_HD type: Video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
chip-ID: 0c45:6a06 class-ID: 0e02
Device-2: 1-6:3 info: Realtek RTS5129 Card Reader Controller
type: <vendor specific> driver: rtsx_usb,rtsx_usb_ms,rtsx_usb_sdmmc
interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 0bda:0129
class-ID: ff00 serial: <filter>
Device-3: 1-8:4 info: Intel Bluetooth wireless interface type: Bluetooth
driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA
chip-ID: 8087:0a2a class-ID: e001
Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 6 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 30.0 C mobo: 26.0 C sodimm: SODIMM C
Fan Speeds (RPM): cpu: 2747
Info:
Processes: 216 Uptime: 1h 47m wakeups: 1 Init: systemd v: 247
tool: systemctl Compilers: gcc: 10.2.0 clang: 11.1.0 Packages: pacman: 1941
lib: 485 flatpak: 0 Shell: fish v: 3.2.1 running-in: yakuake inxi: 3.3.04
❰user❙~❱✔≻
sudo dmesg --level emerg,alert,crit,err,warn
❰greg❙~❱✔≻ sudo dmesg --level emerg,alert,crit,err,warn
[sudo] password for greg:
[ 0.255437] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 6: ee0000000040110a
[ 0.255440] mce: [Hardware Error]: TSC 0 ADDR fef1cf00 MISC 3880020086
[ 0.255445] mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1619644185 SOCKET 0 APIC 0 microcode de
[ 0.255448] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 7: ee0000000040110a
[ 0.255451] mce: [Hardware Error]: TSC 0 ADDR fef1ff00 MISC 43880020086
[ 0.255454] mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1619644185 SOCKET 0 APIC 0 microcode de
[ 0.256216] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.256216] #3
[ 0.262899] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.947378] i8042: Warning: Keylock active
[ 1.306876] ata1.00: supports DRM functions and may not be fully accessible
[ 1.310619] ata1.00: supports DRM functions and may not be fully accessible
[ 2.734779] vboxdrv: loading out-of-tree module taints kernel.
[ 2.790234] VBoxNetAdp: Successfully started.
[ 2.792811] VBoxNetFlt: Successfully started.
[ 3.186315] ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20190816/nsprepkg-94)
[ 3.304613] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 3.372506] i2c_hid i2c-DELL0768:00: i2c-DELL0768:00 supply vdd not found, using dummy regulator
[ 3.372522] i2c_hid i2c-DELL0768:00: i2c-DELL0768:00 supply vddl not found, using dummy regulator
[ 3.426039] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 3.426052] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 3.572433] proc: Bad value for 'hidepid'
[ 3.679906] proc: Bad value for 'hidepid'
[ 3.954627] proc: Bad value for 'hidepid'
[ 4.296294] thermal thermal_zone6: failed to read out thermal zone (-61)
[ 4.753632] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
[ 4.875463] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
[ 5.341007] kauditd_printk_skb: 31 callbacks suppressed
[ 10.420475] kauditd_printk_skb: 6 callbacks suppressed
[ 51.086263] kauditd_printk_skb: 16 callbacks suppressed
[ 173.007436] proc: Bad value for 'hidepid'
❰greg❙~❱✔≻
cat /var/log/Xorg.0.log
❰greg❙~❱✔≻ cat /var/log/Xorg.0.log
[ 43.585] (--) Log file renamed from "/var/log/Xorg.pid-1641.log" to "/var/log/Xorg.0.log"
[ 43.586]
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[ 43.586] Build Operating System: Linux Manjaro Linux
[ 43.586] Current Operating System: Linux greg-inspiron5767 5.4.114-1-MANJARO #1 SMP PREEMPT Wed Apr 21 14:34:53 UTC 2021 x86_64
[ 43.586] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4-x86_64 root=UUID=bfe48f69-800c-4332-b8ea-0df162b1710d rw quiet apparmor=1 security=apparmor udev.log_priority=3
[ 43.586] Build Date: 13 April 2021 04:11:08PM
[ 43.586]
[ 43.586] Current version of pixman: 0.40.0
[ 43.586] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 43.586] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 43.586] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 28 22:10:28 2021
[ 43.586] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 43.586] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 43.587] (==) No Layout section. Using the first Screen section.
[ 43.587] (==) No screen section available. Using defaults.
[ 43.587] (**) |-->Screen "Default Screen Section" (0)
[ 43.587] (**) | |-->Monitor "<default monitor>"
[ 43.587] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 43.587] (==) Automatically adding devices
[ 43.587] (==) Automatically enabling devices
[ 43.587] (==) Automatically adding GPU devices
[ 43.587] (==) Automatically binding GPU devices
[ 43.587] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 43.587] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 43.587] Entry deleted from font path.
[ 43.587] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 43.587] Entry deleted from font path.
[ 43.587] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 43.587] Entry deleted from font path.
[ 43.587] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 43.587] Entry deleted from font path.
[ 43.587] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF
[ 43.587] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 43.587] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 43.587] (II) Module ABI versions:
[ 43.587] X.Org ANSI C Emulation: 0.4
[ 43.587] X.Org Video Driver: 24.1
[ 43.587] X.Org XInput driver : 24.1
[ 43.587] X.Org Server Extension : 10.0
[ 43.588] (++) using VT number 2
[ 43.588] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 43.589] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 43.598] (--) PCI:*(0@0:2:0) 8086:5916:1028:0768 rev 2, Mem @ 0xde000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 43.598] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 43.598] (II) LoadModule: "glx"
[ 43.598] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 43.599] (II) Module glx: vendor="X.Org Foundation"
[ 43.599] compiled for 1.20.11, module version = 1.0.0
[ 43.599] ABI class: X.Org Server Extension, version 10.0
[ 43.599] (==) Matched intel as autoconfigured driver 0
[ 43.599] (==) Matched modesetting as autoconfigured driver 1
[ 43.599] (==) Matched fbdev as autoconfigured driver 2
[ 43.599] (==) Matched vesa as autoconfigured driver 3
[ 43.599] (==) Assigned the driver to the xf86ConfigLayout
[ 43.599] (II) LoadModule: "intel"
[ 43.599] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 43.599] (II) Module intel: vendor="X.Org Foundation"
[ 43.599] compiled for 1.20.10, module version = 2.99.917
[ 43.599] Module class: X.Org Video Driver
[ 43.599] ABI class: X.Org Video Driver, version 24.1
[ 43.600] (II) LoadModule: "modesetting"
[ 43.600] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 43.600] (II) Module modesetting: vendor="X.Org Foundation"
[ 43.600] compiled for 1.20.11, module version = 1.20.11
[ 43.600] Module class: X.Org Video Driver
[ 43.600] ABI class: X.Org Video Driver, version 24.1
[ 43.600] (II) LoadModule: "fbdev"
[ 43.600] (WW) Warning, couldn't open module fbdev
[ 43.600] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 43.600] (II) LoadModule: "vesa"
[ 43.600] (WW) Warning, couldn't open module vesa
[ 43.600] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 43.600] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 43.600] (II) intel: Driver for Intel(R) HD Graphics
[ 43.600] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 43.600] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 43.600] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 43.617] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20190822
[ 43.617] (II) intel(0): SNA compiled from 2.99.917-916-g31486f40
[ 43.631] (WW) Falling back to old probe method for modesetting
[ 43.632] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 620
[ 43.632] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[ 43.632] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 43.632] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 43.632] (==) intel(0): RGB weight 888
[ 43.632] (==) intel(0): Default visual is TrueColor
[ 43.632] (II) intel(0): Output eDP1 has no monitor section
[ 43.632] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 43.632] (II) intel(0): Enabled output eDP1
[ 43.632] (II) intel(0): Output HDMI1 has no monitor section
[ 43.632] (II) intel(0): Enabled output HDMI1
[ 43.632] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 43.632] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 43.632] (II) intel(0): Enabled output VIRTUAL1
[ 43.632] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 43.632] (==) intel(0): TearFree enabled
[ 43.632] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 43.632] (==) intel(0): DPI set to (96, 96)
[ 43.632] (II) Loading sub module "dri3"
[ 43.632] (II) LoadModule: "dri3"
[ 43.632] (II) Module "dri3" already built-in
[ 43.632] (II) Loading sub module "dri2"
[ 43.632] (II) LoadModule: "dri2"
[ 43.632] (II) Module "dri2" already built-in
[ 43.632] (II) Loading sub module "present"
[ 43.632] (II) LoadModule: "present"
[ 43.632] (II) Module "present" already built-in
[ 43.632] (II) UnloadModule: "modesetting"
[ 43.632] (II) Unloading modesetting
[ 43.633] (II) intel(0): SNA initialized with Kabylake (gen9) backend
[ 43.633] (==) intel(0): Backing store enabled
[ 43.633] (==) intel(0): Silken mouse disabled
[ 43.633] (II) intel(0): HW Cursor enabled
[ 43.633] (==) intel(0): DPMS enabled
[ 43.633] (==) intel(0): Display hotplug detection enabled
[ 43.633] (II) intel(0): [DRI2] Setup complete
[ 43.633] (II) intel(0): [DRI2] DRI driver: i965
[ 43.633] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 43.633] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 43.633] (II) intel(0): hardware support for Present enabled
[ 43.633] (II) Initializing extension Generic Event Extension
[ 43.633] (II) Initializing extension SHAPE
[ 43.633] (II) Initializing extension MIT-SHM
[ 43.633] (II) Initializing extension XInputExtension
[ 43.633] (II) Initializing extension XTEST
[ 43.634] (II) Initializing extension BIG-REQUESTS
[ 43.634] (II) Initializing extension SYNC
[ 43.634] (II) Initializing extension XKEYBOARD
[ 43.634] (II) Initializing extension XC-MISC
[ 43.634] (II) Initializing extension SECURITY
[ 43.634] (II) Initializing extension XFIXES
[ 43.634] (II) Initializing extension RENDER
[ 43.634] (II) Initializing extension RANDR
[ 43.634] (II) Initializing extension COMPOSITE
[ 43.634] (II) Initializing extension DAMAGE
[ 43.635] (II) Initializing extension MIT-SCREEN-SAVER
[ 43.635] (II) Initializing extension DOUBLE-BUFFER
[ 43.635] (II) Initializing extension RECORD
[ 43.635] (II) Initializing extension DPMS
[ 43.635] (II) Initializing extension Present
[ 43.635] (II) Initializing extension DRI3
[ 43.635] (II) Initializing extension X-Resource
[ 43.635] (II) Initializing extension XVideo
[ 43.635] (II) Initializing extension XVideo-MotionCompensation
[ 43.635] (II) Initializing extension GLX
[ 43.643] (II) AIGLX: Loaded and initialized i965
[ 43.643] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 43.643] (II) Initializing extension XFree86-VidModeExtension
[ 43.643] (II) Initializing extension XFree86-DGA
[ 43.643] (II) Initializing extension XFree86-DRI
[ 43.643] (II) Initializing extension DRI2
[ 43.646] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 43.647] (II) intel(0): Setting screen physical size to 508 x 285
[ 43.676] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 43.676] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 43.676] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 43.676] (**) Power Button: Applying InputClass "system-keyboard"
[ 43.676] (II) LoadModule: "libinput"
[ 43.676] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 43.677] (II) Module libinput: vendor="X.Org Foundation"
[ 43.677] compiled for 1.20.11, module version = 1.0.1
[ 43.677] Module class: X.Org XInput Driver
[ 43.677] ABI class: X.Org XInput driver, version 24.1
[ 43.677] (II) Using input driver 'libinput' for 'Power Button'
[ 43.678] (**) Power Button: always reports core events
[ 43.678] (**) Option "Device" "/dev/input/event3"
[ 43.678] (**) Option "_source" "server/udev"
[ 43.679] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 43.679] (II) event3 - Power Button: device is a keyboard
[ 43.679] (II) event3 - Power Button: device removed
[ 43.695] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 43.695] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 43.695] (**) Option "xkb_layout" "gb"
[ 43.708] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 43.709] (II) event3 - Power Button: device is a keyboard
[ 43.709] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 43.709] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 43.709] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 43.709] (**) Video Bus: Applying InputClass "system-keyboard"
[ 43.709] (II) Using input driver 'libinput' for 'Video Bus'
[ 43.709] (**) Video Bus: always reports core events
[ 43.709] (**) Option "Device" "/dev/input/event10"
[ 43.709] (**) Option "_source" "server/udev"
[ 43.710] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[ 43.710] (II) event10 - Video Bus: device is a keyboard
[ 43.710] (II) event10 - Video Bus: device removed
[ 43.748] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event10"
[ 43.748] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 43.748] (**) Option "xkb_layout" "gb"
[ 43.750] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[ 43.750] (II) event10 - Video Bus: device is a keyboard
[ 43.751] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 43.751] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 43.751] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 43.751] (**) Power Button: Applying InputClass "system-keyboard"
[ 43.751] (II) Using input driver 'libinput' for 'Power Button'
[ 43.751] (**) Power Button: always reports core events
[ 43.751] (**) Option "Device" "/dev/input/event1"
[ 43.751] (**) Option "_source" "server/udev"
[ 43.753] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 43.753] (II) event1 - Power Button: device is a keyboard
[ 43.753] (II) event1 - Power Button: device removed
[ 43.778] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 43.778] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 43.778] (**) Option "xkb_layout" "gb"
[ 43.780] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 43.780] (II) event1 - Power Button: device is a keyboard
[ 43.782] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 43.782] (II) No input driver specified, ignoring this device.
[ 43.782] (II) This device may have been added with another device file.
[ 43.783] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 43.783] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 43.783] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 43.783] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 43.783] (II) Using input driver 'libinput' for 'Sleep Button'
[ 43.783] (**) Sleep Button: always reports core events
[ 43.783] (**) Option "Device" "/dev/input/event2"
[ 43.783] (**) Option "_source" "server/udev"
[ 43.785] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 43.785] (II) event2 - Sleep Button: device is a keyboard
[ 43.785] (II) event2 - Sleep Button: device removed
[ 43.801] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 43.801] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 43.801] (**) Option "xkb_layout" "gb"
[ 43.804] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 43.804] (II) event2 - Sleep Button: device is a keyboard
[ 43.806] (II) config/udev: Adding input device Integrated_Webcam_HD: Integrate (/dev/input/event18)
[ 43.806] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "evdev keyboard catchall"
[ 43.806] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "libinput keyboard catchall"
[ 43.806] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "system-keyboard"
[ 43.806] (II) Using input driver 'libinput' for 'Integrated_Webcam_HD: Integrate'
[ 43.806] (**) Integrated_Webcam_HD: Integrate: always reports core events
[ 43.806] (**) Option "Device" "/dev/input/event18"
[ 43.806] (**) Option "_source" "server/udev"
[ 43.809] (II) event18 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[ 43.809] (II) event18 - Integrated_Webcam_HD: Integrate: device is a keyboard
[ 43.809] (II) event18 - Integrated_Webcam_HD: Integrate: device removed
[ 43.864] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input24/event18"
[ 43.864] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD: Integrate" (type: KEYBOARD, id 10)
[ 43.864] (**) Option "xkb_layout" "gb"
[ 43.868] (II) event18 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[ 43.868] (II) event18 - Integrated_Webcam_HD: Integrate: device is a keyboard
[ 43.870] (II) config/udev: Adding input device DELL0768:00 06CB:7E92 Mouse (/dev/input/event8)
[ 43.870] (**) DELL0768:00 06CB:7E92 Mouse: Applying InputClass "evdev pointer catchall"
[ 43.870] (**) DELL0768:00 06CB:7E92 Mouse: Applying InputClass "libinput pointer catchall"
[ 43.870] (II) Using input driver 'libinput' for 'DELL0768:00 06CB:7E92 Mouse'
[ 43.870] (**) DELL0768:00 06CB:7E92 Mouse: always reports core events
[ 43.870] (**) Option "Device" "/dev/input/event8"
[ 43.870] (**) Option "_source" "server/udev"
[ 43.873] (II) event8 - DELL0768:00 06CB:7E92 Mouse: is tagged by udev as: Mouse Pointingstick
[ 43.874] (II) event8 - DELL0768:00 06CB:7E92 Mouse: device is a pointer
[ 43.876] (II) event8 - DELL0768:00 06CB:7E92 Mouse: device removed
[ 43.946] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL0768:00/0018:06CB:7E92.0001/input/input13/event8"
[ 43.946] (II) XINPUT: Adding extended input device "DELL0768:00 06CB:7E92 Mouse" (type: MOUSE, id 11)
[ 43.946] (**) Option "AccelerationScheme" "none"
[ 43.946] (**) DELL0768:00 06CB:7E92 Mouse: (accel) selected scheme none/0
[ 43.946] (**) DELL0768:00 06CB:7E92 Mouse: (accel) acceleration factor: 2.000
[ 43.946] (**) DELL0768:00 06CB:7E92 Mouse: (accel) acceleration threshold: 4
[ 43.949] (II) event8 - DELL0768:00 06CB:7E92 Mouse: is tagged by udev as: Mouse Pointingstick
[ 43.950] (II) event8 - DELL0768:00 06CB:7E92 Mouse: device is a pointer
[ 43.953] (II) config/udev: Adding input device DELL0768:00 06CB:7E92 Mouse (/dev/input/mouse0)
[ 43.953] (II) No input driver specified, ignoring this device.
[ 43.953] (II) This device may have been added with another device file.
[ 43.955] (II) config/udev: Adding input device DELL0768:00 06CB:7E92 Touchpad (/dev/input/event9)
[ 43.955] (**) DELL0768:00 06CB:7E92 Touchpad: Applying InputClass "evdev touchpad catchall"
[ 43.955] (**) DELL0768:00 06CB:7E92 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 43.955] (**) DELL0768:00 06CB:7E92 Touchpad: Applying InputClass "touchpad catchall"
[ 43.955] (**) DELL0768:00 06CB:7E92 Touchpad: Applying InputClass "Default clickpad buttons"
[ 43.955] (**) DELL0768:00 06CB:7E92 Touchpad: Applying InputClass "touchpad"
[ 43.955] (II) LoadModule: "synaptics"
[ 43.955] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 43.955] (II) Module synaptics: vendor="X.Org Foundation"
[ 43.955] compiled for 1.20.8, module version = 1.9.1
[ 43.956] Module class: X.Org XInput Driver
[ 43.956] ABI class: X.Org XInput driver, version 24.1
[ 43.956] (II) Using input driver 'synaptics' for 'DELL0768:00 06CB:7E92 Touchpad'
[ 43.956] (**) DELL0768:00 06CB:7E92 Touchpad: always reports core events
[ 43.956] (**) Option "Device" "/dev/input/event9"
[ 44.031] (II) synaptics: DELL0768:00 06CB:7E92 Touchpad: found clickpad property
[ 44.031] (--) synaptics: DELL0768:00 06CB:7E92 Touchpad: x-axis range 0 - 1229 (res 12)
[ 44.031] (--) synaptics: DELL0768:00 06CB:7E92 Touchpad: y-axis range 0 - 929 (res 12)
[ 44.031] (II) synaptics: DELL0768:00 06CB:7E92 Touchpad: device does not report pressure, will use touch data.
[ 44.031] (II) synaptics: DELL0768:00 06CB:7E92 Touchpad: device does not report finger width.
[ 44.031] (--) synaptics: DELL0768:00 06CB:7E92 Touchpad: buttons: left double triple
[ 44.031] (--) synaptics: DELL0768:00 06CB:7E92 Touchpad: Vendor 0x6cb Product 0x7e92
[ 44.031] (--) synaptics: DELL0768:00 06CB:7E92 Touchpad: invalid pressure range. defaulting to 0 - 255
[ 44.032] (--) synaptics: DELL0768:00 06CB:7E92 Touchpad: invalid finger width range. defaulting to 0 - 15
[ 44.032] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 44.032] (--) synaptics: DELL0768:00 06CB:7E92 Touchpad: touchpad found
[ 44.032] (**) DELL0768:00 06CB:7E92 Touchpad: always reports core events
[ 44.085] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL0768:00/0018:06CB:7E92.0001/input/input14/event9"
[ 44.085] (II) XINPUT: Adding extended input device "DELL0768:00 06CB:7E92 Touchpad" (type: TOUCHPAD, id 12)
[ 44.085] (**) synaptics: DELL0768:00 06CB:7E92 Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 44.085] (**) synaptics: DELL0768:00 06CB:7E92 Touchpad: (accel) MaxSpeed is now 1.75
[ 44.085] (**) synaptics: DELL0768:00 06CB:7E92 Touchpad: (accel) AccelFactor is now 0.130
[ 44.085] (**) DELL0768:00 06CB:7E92 Touchpad: (accel) keeping acceleration scheme 1
[ 44.085] (**) DELL0768:00 06CB:7E92 Touchpad: (accel) acceleration profile 1
[ 44.085] (**) DELL0768:00 06CB:7E92 Touchpad: (accel) acceleration factor: 2.000
[ 44.085] (**) DELL0768:00 06CB:7E92 Touchpad: (accel) acceleration threshold: 4
[ 44.085] (--) synaptics: DELL0768:00 06CB:7E92 Touchpad: touchpad found
[ 44.087] (II) config/udev: Adding input device DELL0768:00 06CB:7E92 Touchpad (/dev/input/mouse1)
[ 44.087] (**) DELL0768:00 06CB:7E92 Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 44.088] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 44.088] (II) No input driver specified, ignoring this device.
[ 44.088] (II) This device may have been added with another device file.
[ 44.089] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event12)
[ 44.089] (II) No input driver specified, ignoring this device.
[ 44.090] (II) This device may have been added with another device file.
[ 44.091] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[ 44.091] (II) No input driver specified, ignoring this device.
[ 44.091] (II) This device may have been added with another device file.
[ 44.092] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
[ 44.092] (II) No input driver specified, ignoring this device.
[ 44.092] (II) This device may have been added with another device file.
[ 44.093] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
[ 44.093] (II) No input driver specified, ignoring this device.
[ 44.093] (II) This device may have been added with another device file.
[ 44.094] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event16)
[ 44.094] (II) No input driver specified, ignoring this device.
[ 44.094] (II) This device may have been added with another device file.
[ 44.095] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event17)
[ 44.095] (II) No input driver specified, ignoring this device.
[ 44.095] (II) This device may have been added with another device file.
[ 44.097] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[ 44.097] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 44.097] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 44.097] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
[ 44.097] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[ 44.097] (**) Dell WMI hotkeys: always reports core events
[ 44.097] (**) Option "Device" "/dev/input/event7"
[ 44.097] (**) Option "_source" "server/udev"
[ 44.099] (II) event7 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 44.100] (II) event7 - Dell WMI hotkeys: device is a keyboard
[ 44.100] (II) event7 - Dell WMI hotkeys: device removed
[ 44.151] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/PNP0C14:00-9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9/event7"
[ 44.151] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 13)
[ 44.151] (**) Option "xkb_layout" "gb"
[ 44.154] (II) event7 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 44.155] (II) event7 - Dell WMI hotkeys: device is a keyboard
[ 44.157] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 44.157] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 44.157] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 44.157] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 44.157] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 44.157] (**) AT Translated Set 2 keyboard: always reports core events
[ 44.157] (**) Option "Device" "/dev/input/event4"
[ 44.157] (**) Option "_source" "server/udev"
[ 44.160] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 44.160] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 44.162] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 44.190] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 44.190] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 44.190] (**) Option "xkb_layout" "gb"
[ 44.193] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 44.193] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 44.195] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 44.195] (II) No input driver specified, ignoring this device.
[ 44.195] (II) This device may have been added with another device file.
[ 44.196] (II) config/udev: Adding input device DELL Wireless hotkeys (/dev/input/event5)
[ 44.196] (**) DELL Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[ 44.196] (**) DELL Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[ 44.196] (**) DELL Wireless hotkeys: Applying InputClass "system-keyboard"
[ 44.196] (II) Using input driver 'libinput' for 'DELL Wireless hotkeys'
[ 44.196] (**) DELL Wireless hotkeys: always reports core events
[ 44.196] (**) Option "Device" "/dev/input/event5"
[ 44.196] (**) Option "_source" "server/udev"
[ 44.196] (II) event5 - DELL Wireless hotkeys: is tagged by udev as: Keyboard
[ 44.196] (II) event5 - DELL Wireless hotkeys: device is a keyboard
[ 44.196] (II) event5 - DELL Wireless hotkeys: device removed
[ 44.272] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event5"
[ 44.272] (II) XINPUT: Adding extended input device "DELL Wireless hotkeys" (type: KEYBOARD, id 15)
[ 44.272] (**) Option "xkb_layout" "gb"
[ 44.273] (II) event5 - DELL Wireless hotkeys: is tagged by udev as: Keyboard
[ 44.273] (II) event5 - DELL Wireless hotkeys: device is a keyboard
[ 45.636] (II) intel(0): EDID vendor "LGD", prod id 1299
[ 45.636] (II) intel(0): Printing DDC gathered Modelines:
[ 45.636] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[ 45.636] (II) intel(0): Modeline "1920x1080"x0.0 110.96 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (53.3 kHz e)
❰greg❙~❱✔≻
