mox
31 August 2020 09:25
1
I have Lenovo V130 and i want to crank up the fans a little. My laptop sits at 50 degrees (celsius) idle. I know it isn’t that much high but my fans come alive after 60 degrees only. I want them to be at level 2 at least at 50.
I have read the thinkfan, nbfc and fancontrol wikis. They helped a lot but fancontrol and nbfc didn’t work with my laptop.
thinkfan is supported but I want help in setting it up as the hwmon sensors change in name after every boot and thinkfan fails to start and my laptop then sits at 80 degrees on idle.
Thank you for your time and reply in advance.
mox
2 September 2020 15:17
2
System:
Kernel: 5.4.60-2-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
Desktop: KDE Plasma 5.19.4 tk: Qt 5.15.0 wm: kwin_x11 dm: SDDM
Distro: Manjaro Linux
Machine:
Type: Laptop System: LENOVO product: 81HN v: Lenovo V130-15IKB
serial: <filter> Chassis: type: 10 v: Lenovo V130-15IKB serial: <filter>
Mobo: LENOVO model: LNVNB161216 v: NO DPK serial: <filter> UEFI: LENOVO
v: 8VCN17WW date: 05/02/2019
Battery:
ID-1: BAT0 charge: 22.0 Wh condition: 30.5/30.6 Wh (100%) volts: 7.8/7.6
model: CPT-COS L17C2PB3 type: Li-poly serial: <filter> status: Discharging
Memory:
RAM: total: 7.12 GiB used: 2.81 GiB (39.4%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Topology: Quad Core model: Intel Core i5-8250U bits: 64 type: MT MCP
arch: Kaby Lake rev: A L2 cache: 6144 KiB bogomips: 28808
Speed: 948 MHz min/max: 400/3400 MHz Core speeds (MHz): 1: 900 2: 901
3: 900 4: 900 5: 900 6: 900 7: 901 8: 901
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon
art avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid
cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est
f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht hwp hwp_act_window
hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid invpcid_single lahf_lm
lm mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae
pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti
pts rdrand rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2
sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt
xsaves xtopology xtpr
Graphics:
Device-1: Intel UHD Graphics 620 vendor: Lenovo driver: i915 v: kernel
bus ID: 00:02.0 chip ID: 8086:5917
Device-2: Lite-On Integrated Camera type: USB driver: uvcvideo
bus ID: 1-5:3 chip ID: 04ca:7070
Display: x11 server: X.Org 1.20.8 compositor: kwin_x11
driver: amdgpu,intel FAILED: ati unloaded: modesetting
alternate: fbdev,vesa resolution: 1920x1080~60Hz s-dpi: 96
OpenGL: renderer: Mesa Intel UHD Graphics 620 (KBL GT2) v: 4.6 Mesa 20.1.6
direct render: Yes
Audio:
Device-1: Intel Sunrise Point-LP HD Audio vendor: Lenovo
driver: snd_hda_intel v: kernel bus ID: 00:1f.3 chip ID: 8086:9d71
Sound Server: ALSA v: k5.4.60-2-MANJARO
Network:
Device-1: Intel Dual Band Wireless-AC 3165 Plus Bluetooth driver: iwlwifi
v: kernel port: efa0 bus ID: 02:00.0 chip ID: 8086:3166
IF: wlp2s0 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Lenovo driver: r8169 v: kernel port: c000 bus ID: 03:00.0
chip ID: 10ec:8168
IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Drives:
Local Storage: total: 1.13 TiB used: 42.55 GiB (3.7%)
ID-1: /dev/sda vendor: Seagate model: ST1000LM035-1RK172 size: 931.51 GiB
speed: 6.0 Gb/s rotation: 5400 rpm serial: <filter> rev: LCM2 scheme: MBR
ID-2: /dev/sdb vendor: Western Digital model: WDS240G2G0B-00EPW0
size: 223.58 GiB speed: 6.0 Gb/s serial: <filter> rev: 0000 scheme: GPT
Optical-1: /dev/sr0 vendor: PLDS model: DVD-RW DA8AESH rev: XL6M
dev-links: cdrom
Features: speed: 24 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r state: running
RAID:
Message: No RAID data was found.
Partition:
ID-1: / size: 210.11 GiB used: 42.18 GiB (20.1%) fs: ext4 dev: /dev/sdb2
label: N/A uuid: 5e8adfe5-574a-4645-aa11-241e3d75faed
ID-2: /boot/efi size: 299.4 MiB used: 280 KiB (0.1%) fs: vfat
dev: /dev/sdb1 label: N/A uuid: 99E8-AC6A
Swap:
ID-1: swap-1 type: partition size: 8.80 GiB used: 385.0 MiB (4.3%)
priority: -2 dev: /dev/sdb3 label: N/A
uuid: 141c0d1a-02fb-4946-9d37-d63fe7566fc7
Unmounted:
ID-1: /dev/sda1 size: 232.83 GiB fs: ext4 label: HDD.Part1 Bkps
uuid: 6ba795dc-2154-4b2e-bb88-3e55ebd23235
ID-2: /dev/sda2 size: 7.45 GiB fs: swap label: swap
uuid: d7488ea0-db70-4f68-9f0e-e35530a0c752
ID-3: /dev/sda3 size: 465.85 GiB fs: ntfs label: HDD.Part3 Personal
uuid: 1A306D1F34155F53
ID-4: /dev/sda4 size: 225.38 GiB fs: ext4 label: HDD.Part4 PCBkp
uuid: 12032873-a888-4fbb-b4da-f5c523b559b4
USB:
Hub: 1-0:1 info: Full speed (or root) Hub ports: 12 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002
Device-1: 1-1:2 info: Areson Corp 2.4G Receiver type: Keyboard,Mouse
driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 25a7:fa23
Device-2: 1-5:3 info: Lite-On Integrated Camera type: Video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 04ca:7070
Device-3: 1-8:4 info: Intel Bluetooth wireless interface type: Bluetooth
driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 8087:0a2a
Hub: 2-0:1 info: Full speed (or root) Hub ports: 6 rev: 3.0 speed: 5 Gb/s
chip ID: 1d6b:0003
Sensors:
System Temperatures: cpu: 50.0 C mobo: 45.0 C gpu: amdgpu temp: 49 C
Fan Speeds (RPM): N/A
Info:
Processes: 243 Uptime: 3h 30m Init: systemd v: 246 Compilers: gcc: 10.2.0
Packages: 1295 pacman: 1291 snap: 4 Shell: Bash v: 5.0.18
running in: konsole inxi: 3.1.05