External ports becoming inactive due to power fluctuations

freggel.doe · 19 November 2021 22:20

[tlp 1.4.0-1] USB ports don't work on battery

opened 11:00AM - 05 Oct 21 UTC

closed 10:21AM - 16 Jul 23 UTC

kernel issue documentation change fixed/completed regression ahci pm

[x] I've read and accepted the [Bug Reporting Howto](https://github.com/linrunne…r/TLP/blob/master/.github/Bug_Reporting_Howto.md) [x] I've attached all required `tlp-stat` outputs via [Gist](https://gist.github.com/) (see below) **Describe the bug** After the update this morning from version tlp 1.3.1 to tlp 1.4.0 the usb ports don't work as expected. With version 1.3.1 I never had any prolembs with my usb ports. With version 1.4.0 the usb ports works, if I have the power supplier plugged to my device. If I remove the power supplier, the usb ports stop working after few seconds. I just replaced tlp version 1.4.0 with version 1.3.1 out of my pacman cache and everything works as expected again. This problem is also at an other device by a fellow student. **Expected behavior** Fix, that the usb ports are also working in battery mode. **To Reproduce** Steps to reproduce the unexpected behavior: 1. Does the problem occur on battery or AC or both? only on battery mode 2. Actions to reproduce the behaviour Use tlp version 1.4.0 with a Lenovo notebook and try to use usb. 3. Shell commands entered and their output none - but if you need some, I can do it 4. **Full output of `tlp-stat` via https://gist.github.com/ for *all* matching cases of 1.** --- TLP 1.4.0 -------------------------------------------- +++ Configured Settings: defaults.conf L0004: TLP_ENABLE="1" defaults.conf L0005: TLP_WARN_LEVEL="3" defaults.conf L0006: TLP_PERSISTENT_DEFAULT="0" defaults.conf L0007: DISK_IDLE_SECS_ON_AC="0" defaults.conf L0008: DISK_IDLE_SECS_ON_BAT="2" defaults.conf L0009: MAX_LOST_WORK_SECS_ON_AC="15" defaults.conf L0010: MAX_LOST_WORK_SECS_ON_BAT="60" defaults.conf L0011: CPU_ENERGY_PERF_POLICY_ON_AC="balance_performance" defaults.conf L0012: CPU_ENERGY_PERF_POLICY_ON_BAT="balance_power" defaults.conf L0013: SCHED_POWERSAVE_ON_AC="0" defaults.conf L0014: SCHED_POWERSAVE_ON_BAT="1" defaults.conf L0015: NMI_WATCHDOG="0" defaults.conf L0016: DISK_DEVICES="nvme0n1 sda" defaults.conf L0017: DISK_APM_LEVEL_ON_AC="254 254" defaults.conf L0018: DISK_APM_LEVEL_ON_BAT="128 128" defaults.conf L0019: DISK_APM_CLASS_DENYLIST="usb ieee1394" defaults.conf L0020: DISK_IOSCHED="keep keep" defaults.conf L0021: SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance" defaults.conf L0022: SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power" defaults.conf L0023: AHCI_RUNTIME_PM_ON_AC="on" defaults.conf L0024: AHCI_RUNTIME_PM_ON_BAT="auto" defaults.conf L0025: AHCI_RUNTIME_PM_TIMEOUT="15" defaults.conf L0026: PCIE_ASPM_ON_AC="default" defaults.conf L0027: PCIE_ASPM_ON_BAT="default" defaults.conf L0028: RADEON_DPM_PERF_LEVEL_ON_AC="auto" defaults.conf L0029: RADEON_DPM_PERF_LEVEL_ON_BAT="auto" defaults.conf L0030: RADEON_POWER_PROFILE_ON_AC="default" defaults.conf L0031: RADEON_POWER_PROFILE_ON_BAT="default" defaults.conf L0032: WIFI_PWR_ON_AC="off" defaults.conf L0033: WIFI_PWR_ON_BAT="on" defaults.conf L0034: WOL_DISABLE="Y" defaults.conf L0035: SOUND_POWER_SAVE_ON_AC="1" defaults.conf L0036: SOUND_POWER_SAVE_ON_BAT="1" defaults.conf L0037: SOUND_POWER_SAVE_CONTROLLER="Y" defaults.conf L0038: BAY_POWEROFF_ON_AC="0" defaults.conf L0039: BAY_POWEROFF_ON_BAT="0" defaults.conf L0040: BAY_DEVICE="sr0" defaults.conf L0041: RUNTIME_PM_ON_AC="on" defaults.conf L0042: RUNTIME_PM_ON_BAT="auto" defaults.conf L0043: RUNTIME_PM_DRIVER_DENYLIST="mei_me nouveau radeon" defaults.conf L0044: USB_AUTOSUSPEND="1" defaults.conf L0045: USB_EXCLUDE_AUDIO="1" defaults.conf L0046: USB_EXCLUDE_BTUSB="0" defaults.conf L0047: USB_EXCLUDE_PHONE="0" defaults.conf L0048: USB_EXCLUDE_PRINTER="1" defaults.conf L0049: USB_EXCLUDE_WWAN="0" defaults.conf L0050: USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN="0" defaults.conf L0051: RESTORE_DEVICE_STATE_ON_STARTUP="0" defaults.conf L0052: RESTORE_THRESHOLDS_ON_BAT="0" defaults.conf L0053: NATACPI_ENABLE="1" defaults.conf L0054: TPACPI_ENABLE="1" defaults.conf L0055: TPSMAPI_ENABLE="1" +++ System Info System = LENOVO ThinkPad E595 20NF0006GE BIOS = R11ET39W (1.19 ) OS Release = Arch Linux Kernel = 5.14.8-arch1-1 #1 SMP PREEMPT Sun, 26 Sep 2021 19:36:15 +0000 x86_64 /proc/cmdline = initrd=\initramfs-linux.img cryptdevice=/dev/nvme0n1p2:main root=/dev/mapper/main-home rw lang=de init=/usr/lib/systemd/systemd locale=de_DE.UTF-8 Init system = systemd Boot mode = UEFI +++ TLP Status State = enabled RDW state = not installed Last run = 12:47:41, 725 sec(s) ago Mode = battery Power source = battery Warning: systemd-rfkill.service is not masked, radio device switching may not work as configured. >>> Invoke 'systemctl mask systemd-rfkill.service' to correct this. Warning: systemd-rfkill.socket is not masked, radio device switching may not work as configured. >>> Invoke 'systemctl mask systemd-rfkill.socket' to correct this. +++ Processor CPU model = AMD Ryzen 5 3500U with Radeon Vega Mobile Gfx /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver = acpi-cpufreq /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = schedutil /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq = 1400000 [kHz] /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq = 2100000 [kHz] /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies = 2100000 1700000 1400000 [kHz] /sys/devices/system/cpu/cpu1..cpu7: omitted for clarity, use -v to show all /sys/devices/system/cpu/cpufreq/boost = 1 /sys/module/workqueue/parameters/power_efficient = Y /proc/sys/kernel/nmi_watchdog = 0 +++ Platform Profile /sys/firmware/acpi/platform_profile = (not available) /sys/firmware/acpi/platform_profile_choices = (not available) /sys/devices/platform/thinkpad_acpi/dytc_lapmode = (not available) +++ Temperatures /proc/acpi/ibm/thermal = 46 0 0 0 0 0 0 0 [°C] /proc/acpi/ibm/fan = 0 [/min] +++ File System /proc/sys/vm/laptop_mode = 2 /proc/sys/vm/dirty_writeback_centisecs = 6000 /proc/sys/vm/dirty_expire_centisecs = 6000 /proc/sys/vm/dirty_ratio = 20 /proc/sys/vm/dirty_background_ratio = 10 +++ Disks Devices = nvme0n1 sda /dev/nvme0n1: Type = NVMe Disk ID = nvme-HFM256GDHTNG-8510B_CS9CN63691110CI4M Model = HFM256GDHTNG-8510B Firmware = 80020C00 Temp = 27 °C Scheduler = [none] mq-deadline kyber bfq (multi queue) Runtime PM: /sys/block/nvme0n1/power/control = auto, autosuspend_delay_ms = (not available) SMART info: Critical Warning: 0x00 Temperature: 27 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 1% Data Units Written: 4.480.226 [2,29 TB] Power Cycles: 1.557 Power On Hours: 126 Unsafe Shutdowns: 48 Media and Data Integrity Errors: 0 /dev/sda: Type = SATA Disk ID = ata-CT250MX500SSD1_2030E2BA8AF9 Model = CT250MX500SSD1 Firmware = M3CR023 APM Level = 128 Status = active/idle TRIM = supported Host = ../devices/pci0000:00/0000:00:08.2/0000:06:00.0/ata1/host0/target0:0:0/0:0:0:0/block/sda Scheduler = [mq-deadline] kyber bfq none (multi queue) Runtime PM: /sys/block/sda/power/control = on, autosuspend_delay_ms = -1 SMART info: 9 Power_On_Hours = 1119 [h] 12 Power_Cycle_Count = 844 194 Temperature_Celsius = 28 (Min/Max 0/51) [°C] 246 Total_LBAs_Written = 2.028 [TB] +++ AHCI Link Power Management (ALPM) :: SATA Links /sys/bus/pci/devices/0000:06:00.0/ata1/host0/scsi_host/host0/link_power_management_policy = med_power_with_dipm -- sda +++ AHCI Port Runtime Power Management :: SATA/ATA Ports /sys/bus/pci/devices/0000:06:00.0/ata1/power/control = on -- sda +++ AMD Radeon Graphics /sys/class/drm/card0/device/driver = amdgpu /sys/class/drm/card0/device/power_dpm_force_performance_level = auto +++ Wireless bluetooth = off (software) wifi = on wwan = none (no device) hci0(btusb) : bluetooth, not connected wlp4s0(iwlwifi) : wifi, connected, power management = on +++ Audio /sys/module/snd_hda_intel/parameters/power_save = 1 /sys/module/snd_hda_intel/parameters/power_save_controller = Y +++ PCIe Active State Power Management /sys/module/pcie_aspm/parameters/policy = [default] performance powersave powersupersave (using BIOS preferences) +++ PCIe Runtime Power Management Enable devices = (disabled) Disable devices = (disabled) Device denylist = (disabled) Driver denylist = mei_me nouveau radeon /sys/bus/pci/devices/0000:00:00.0/power/control = auto (0x060000, Host bridge, no driver) /sys/bus/pci/devices/0000:00:00.2/power/control = auto (0x080600, IOMMU, no driver) /sys/bus/pci/devices/0000:00:01.0/power/control = auto (0x060000, Host bridge, no driver) /sys/bus/pci/devices/0000:00:01.1/power/control = auto (0x060400, PCI bridge, pcieport) /sys/bus/pci/devices/0000:00:01.2/power/control = auto (0x060400, PCI bridge, pcieport) /sys/bus/pci/devices/0000:00:01.3/power/control = auto (0x060400, PCI bridge, pcieport) /sys/bus/pci/devices/0000:00:01.6/power/control = on (0x060400, PCI bridge, pcieport) /sys/bus/pci/devices/0000:00:08.0/power/control = auto (0x060000, Host bridge, no driver) /sys/bus/pci/devices/0000:00:08.1/power/control = auto (0x060400, PCI bridge, pcieport) /sys/bus/pci/devices/0000:00:08.2/power/control = auto (0x060400, PCI bridge, pcieport) /sys/bus/pci/devices/0000:00:14.0/power/control = auto (0x0c0500, SMBus, piix4_smbus) /sys/bus/pci/devices/0000:00:14.3/power/control = auto (0x060100, ISA bridge, no driver) /sys/bus/pci/devices/0000:00:18.0/power/control = auto (0x060000, Host bridge, no driver) /sys/bus/pci/devices/0000:00:18.1/power/control = auto (0x060000, Host bridge, no driver) /sys/bus/pci/devices/0000:00:18.2/power/control = auto (0x060000, Host bridge, no driver) /sys/bus/pci/devices/0000:00:18.3/power/control = auto (0x060000, Host bridge, k10temp) /sys/bus/pci/devices/0000:00:18.4/power/control = auto (0x060000, Host bridge, no driver) /sys/bus/pci/devices/0000:00:18.5/power/control = auto (0x060000, Host bridge, no driver) /sys/bus/pci/devices/0000:00:18.6/power/control = auto (0x060000, Host bridge, no driver) /sys/bus/pci/devices/0000:00:18.7/power/control = auto (0x060000, Host bridge, no driver) /sys/bus/pci/devices/0000:01:00.0/power/control = auto (0x010802, Non-Volatile memory controller, nvme) /sys/bus/pci/devices/0000:02:00.0/power/control = auto (0x020000, Ethernet controller, r8169) /sys/bus/pci/devices/0000:03:00.0/power/control = auto (0xff0000, Unassigned class [ff00], rtsx_pci) /sys/bus/pci/devices/0000:04:00.0/power/control = auto (0x028000, Network controller, iwlwifi) /sys/bus/pci/devices/0000:05:00.0/power/control = on (0x030000, VGA compatible controller, amdgpu) /sys/bus/pci/devices/0000:05:00.1/power/control = auto (0x040300, Audio device, snd_hda_intel) /sys/bus/pci/devices/0000:05:00.2/power/control = auto (0x108000, Encryption controller, ccp) /sys/bus/pci/devices/0000:05:00.3/power/control = auto (0x0c0330, USB controller, xhci_hcd) /sys/bus/pci/devices/0000:05:00.4/power/control = auto (0x0c0330, USB controller, xhci_hcd) /sys/bus/pci/devices/0000:05:00.5/power/control = auto (0x048000, Multimedia controller, snd_pci_acp3x) /sys/bus/pci/devices/0000:05:00.6/power/control = auto (0x040300, Audio device, snd_hda_intel) /sys/bus/pci/devices/0000:06:00.0/power/control = auto (0x010601, SATA controller, ahci) +++ USB Autosuspend = enabled Device allowlist = (not configured) Device denylist = (not configured) Exclude audio = enabled Exclude bluetooth = disabled Exclude phones = disabled Exclude printers = enabled Exclude WWAN = disabled Bus 004 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 3.0 root hub (hub) Bus 003 Device 003 ID 04f2:b6d9 control = auto, autosuspend_delay_ms = 2000 -- Chicony Electronics Co., Ltd Integrated Camera (uvcvideo) Bus 003 Device 002 ID 8087:0029 control = auto, autosuspend_delay_ms = 2000 -- Intel Corp. AX200 Bluetooth (btusb) Bus 003 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub) Bus 002 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 3.0 root hub (hub) Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub) +++ Battery Care Plugin: thinkpad Supported features: charge thresholds, recalibration Driver usage: * natacpi (thinkpad_acpi) = active (charge thresholds) * tpacpi-bat (acpi_call) = active (recalibration) Parameter value ranges: * START_CHARGE_THRESH_BAT0/1: 0(off)..96(default)..99 * STOP_CHARGE_THRESH_BAT0/1: 1..100(default) +++ ThinkPad Battery Status: BAT0 (Main / Internal) /sys/class/power_supply/BAT0/manufacturer = Celxpert /sys/class/power_supply/BAT0/model_name = 5B10W138 /sys/class/power_supply/BAT0/cycle_count = 155 /sys/class/power_supply/BAT0/energy_full_design = 45730 [mWh] /sys/class/power_supply/BAT0/energy_full = 40640 [mWh] /sys/class/power_supply/BAT0/energy_now = 26750 [mWh] /sys/class/power_supply/BAT0/power_now = 9944 [mW] /sys/class/power_supply/BAT0/status = Discharging /sys/class/power_supply/BAT0/charge_control_start_threshold = 95 [%] /sys/class/power_supply/BAT0/charge_control_end_threshold = 100 [%] tpacpi-bat.BAT0.forceDischarge = 0 Charge = 65.8 [%] Capacity = 88.9 [%] +++ Recommendations * Install ethtool to disable Wake On LAN (WOL)