Hello all,
thank you for manjaro!
I have three monitors - all with speakers - connected to an nVidia graphics card via display port. Now there is the following situation in gnome settings:
Please let me know how to fix this!
Best regards
Gerrit
Can you switch output between monitor 2 and 3 in the audio settings?
… It will help if you provide a bit of system info: inxi -zv8 (use the </> button to format it so it appears in a scrollable box).
Then we’ll know e.g. if you are using PulseAudio or Pipewire etc. .
Same probably for output of pactl list sinks … may help. (Disclaimer: I’m no expert on audio stuff like this, though there are some very knowledgeable members here in this regard).
   ~  inxi -zv8  ✔  21s   
System:
Kernel: 6.6.54-2-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64
root=UUID=319bf7d3-8a5c-4792-8db7-4df6981a2bbc rw quiet splash apparmor=1
security=apparmor resume=UUID=fc9e3ee8-7dee-416a-a1ec-e6d6b877967c
udev.log_priority=3 nvidia-drm.modeset=1
Desktop: GNOME v: 46.5 tk: GTK v: 3.24.43 wm: gnome-shell
tools: gsd-screensaver-proxy dm: GDM v: 46.2 Distro: Manjaro
base: Arch Linux
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: ROG CROSSHAIR VIII DARK HERO v: Rev X.0x
serial: <superuser required> part-nu: SKU uuid: <superuser required>
UEFI: American Megatrends v: 4805 date: 03/18/2024
Battery:
Message: No system battery data found. Is one present?
Memory:
System RAM: total: 64 GiB available: 62.7 GiB used: 15.39 GiB (24.5%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 128 GiB slots: 4 modules: 4 EC: None
max-module-size: 32 GiB note: est.
Device-1: DIMM_A1 type: DDR4 detail: synchronous unbuffered (unregistered)
size: 16 GiB speed: 2666 MT/s volts: note: check curr: 1 min: 1 max: 1
width (bits): data: 64 total: 64 manufacturer: Corsair
part-no: CMD32GX4M2C3200C16 serial: N/A
Device-2: DIMM_A2 type: DDR4 detail: synchronous unbuffered (unregistered)
size: 16 GiB speed: 2666 MT/s volts: note: check curr: 1 min: 1 max: 1
width (bits): data: 64 total: 64 manufacturer: Corsair
part-no: CMD32GX4M2B3000C15 serial: N/A
Device-3: DIMM_B1 type: DDR4 detail: synchronous unbuffered (unregistered)
size: 16 GiB speed: 2666 MT/s volts: note: check curr: 1 min: 1 max: 1
width (bits): data: 64 total: 64 manufacturer: Corsair
part-no: CMD32GX4M2C3200C16 serial: N/A
Device-4: DIMM_B2 type: DDR4 detail: synchronous unbuffered (unregistered)
size: 16 GiB speed: 2666 MT/s volts: note: check curr: 1 min: 1 max: 1
width (bits): data: 64 total: 64 manufacturer: Corsair
part-no: CMD32GX4M2B3000C15 serial: N/A
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: AMD Ryzen 9 5950X bits: 64 type: MT MCP arch: Zen 3+ gen: 3
level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25)
model-id: 0x21 (33) stepping: 0 microcode: 0xA20102B
Topology: cpus: 1x dies: 1 clusters: 1 cores: 16 threads: 32 tpc: 2
smt: enabled cache: L1: 1024 KiB desc: d-16x32 KiB; i-16x32 KiB L2: 8 MiB
desc: 16x512 KiB L3: 64 MiB desc: 2x32 MiB
Speed (MHz): avg: 2200 min/max: 2200/5083 boost: enabled scaling:
driver: acpi-cpufreq governor: schedutil cores: 1: 2200 2: 2200 3: 2200
4: 2200 5: 2200 6: 2200 7: 2200 8: 2200 9: 2200 10: 2200 11: 2200 12: 2200
13: 2200 14: 2200 15: 2200 16: 2200 17: 2200 18: 2200 19: 2200 20: 2200
21: 2200 22: 2200 23: 2200 24: 2200 25: 2200 26: 2200 27: 2200 28: 2200
29: 2200 30: 2200 31: 2200 32: 2200 bogomips: 217673
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
cqm_occup_llc cr8_legacy cx16 cx8 de debug_swap decodeassists erms
extapic extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt
ht hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni
popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep
sha_ni skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3
stibp succor svm svm_lock syscall tce topoext tsc tsc_scale umip
user_shstk v_spec_ctrl v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall
vpclmulqdq wbnoinvd wdt x2apic xgetbv1 xsave xsavec xsaveerptr xsaveopt
xsaves
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow mitigation: Safe RET
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW;
STIBP: always-on; RSB filling; PBRSB-eIBRS: Not affected; BHI: Not
affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA AD102 [GeForce RTX 4090] vendor: ZOTAC driver: nvidia
v: 550.120 alternate: nouveau,nvidia_drm non-free: 550.xx+
status: current (as of 2024-09) arch: Lovelace code: AD1xx
process: TSMC n4 (5nm) built: 2022+ pcie: gen: 1 speed: 2.5 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s ports: active: none off: DP-1,DP-2,DP-3
empty: HDMI-A-1 bus-ID: 0c:00.0 chip-ID: 10de:2684 class-ID: 0300
Device-2: Logitech Webcam C930e driver: snd-usb-audio,uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 5-3.1:3
chip-ID: 046d:0843 class-ID: 0102 serial: <filter>
Display: x11 server: X.org v: 1.21.1.14 with: Xwayland v: 24.1.4
compositor: gnome-shell driver: X: loaded: nvidia
gpu: nvidia,nvidia-nvswitch display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 11520x2160 s-size: <missing: xdpyinfo>
Monitor-1: DP-1 mapped: DP-0 note: disabled pos: right
model: Philips PHL 329P1 serial: <filter> built: 2022 res: 3840x2160 hz: 60
dpi: 140 gamma: 1.2 chroma: red: x: 0.682 y: 0.314 green: x: 0.286
y: 0.659 blue: x: 0.153 y: 0.039 white: x: 0.314 y: 0.329
size: 697x392mm (27.44x15.43") diag: 800mm (31.5") ratio: 16:9
modes: 3840x2160, 1920x2160, 2560x1440, 1920x1080, 1680x1050, 1280x1024,
1440x900, 1280x960, 1280x720, 1024x768, 800x600, 720x576, 720x480,
640x480
Monitor-2: DP-2 note: disabled pos: center model: Gigabyte AORUS FO32U2P
serial: <filter> built: 2024 res: 3840x2160 dpi: 141 gamma: 1.2 chroma: red:
x: 0.686 y: 0.306 green: x: 0.243 y: 0.710 blue: x: 0.141 y: 0.055 white:
x: 0.314 y: 0.329 size: 690x390mm (27.17x15.35") diag: 793mm (31.2")
ratio: 16:9 modes: 3840x2160, 2560x1440, 1920x1080, 1680x1050, 1600x900,
1280x1024, 1440x900, 1280x960, 1280x800, 1152x864, 1280x720, 1024x768,
1440x480, 800x600, 720x480, 640x480
EDID-Warnings: 1: parse_edid: unhandled CEA mode 97 2: parse_edid:
unhandled CEA mode 117 3: parse_edid: unhandled CEA mode 118 4: parse_edid:
unhandled CEA mode 94 5: parse_edid: unhandled CEA mode 95 6: parse_edid:
unhandled CEA mode 96 7: parse_edid: unknown tag 112
Monitor-3: DP-3 mapped: DP-4 note: disabled pos: primary,left
model: Acer XV322QK KV serial: <filter> built: 2022 res: 3840x2160 dpi: 139
gamma: 1.2 chroma: red: x: 0.678 y: 0.314 green: x: 0.271 y: 0.627 blue:
x: 0.145 y: 0.051 white: x: 0.314 y: 0.329 size: 700x390mm (27.56x15.35")
diag: 800mm (31.5") ratio: 16:9 modes: 3840x2160, 2560x1440, 1920x1080,
1680x1050, 1280x1024, 1440x900, 1280x960, 1152x864, 1280x720, 1024x768,
800x600, 720x576, 720x480, 640x480
EDID-Warnings: 1: parse_edid: unhandled CEA mode 97 2: parse_edid:
unhandled CEA mode 118 3: parse_edid: unknown tag 112
API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia device: 2
drv: swrast gbm: drv: nvidia surfaceless: drv: nvidia x11: drv: nvidia
inactive: wayland,device-1
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 550.120
glx-v: 1.4 direct-render: yes renderer: NVIDIA GeForce RTX 4090/PCIe/SSE2
memory: 23.43 GiB
Audio:
Device-1: NVIDIA AD102 High Definition Audio vendor: ZOTAC
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 0c:00.1 chip-ID: 10de:22ba class-ID: 0403
Device-2: Advanced Micro Devices [AMD] Starship/Matisse HD Audio
vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s
lanes: 16 bus-ID: 0e:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-3: Logitech Webcam C930e driver: snd-usb-audio,uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 5-3.1:3
chip-ID: 046d:0843 class-ID: 0102 serial: <filter>
API: ALSA v: k6.6.54-2-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 1.2.5 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Aquantia AQtion AQC107 NBase-T/IEEE 802.3an Ethernet [Atlantic
10G] vendor: ASUSTeK driver: atlantic v: kernel pcie: gen: 3 speed: 8 GT/s
lanes: 4 port: N/A bus-ID: 05:00.0 chip-ID: 1d6a:07b1 class-ID: 0200
IF: enp5s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Realtek RTL8125 2.5GbE vendor: ASUSTeK driver: r8169 v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: e000 bus-ID: 06:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-3: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel
pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 07:00.0
chip-ID: 8086:1539 class-ID: 0200
IF: enp7s0 state: down mac: <filter>
Device-4: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 08:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlp8s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
Device-5: Realtek RTL8153 Gigabit Ethernet Adapter driver: r8152 type: USB
rev: 2.1 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-3.1.1:13
chip-ID: 0bda:8153 class-ID: 0000 serial: <filter>
IF: enp9s0f1u3u1u1 state: down mac: <filter>
Info: services: NetworkManager, sshd, systemd-timesyncd, wpa_supplicant
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-6:5 chip-ID: 8087:0029
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.2
lmp-v: 11 status: discoverable: no pairing: no class-ID: 6c0104
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 5.87 TiB used: 2.79 TiB (47.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 960 PRO 1TB
size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: 2B6QCXP7 temp: 43.9 C
scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:4 vendor: Lexar model: SSD NM790 4TB
size: 3.73 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: 12237 temp: 53.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: OCZ model: VERTEX4 size: 238.47 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s tech: SSD
serial: <filter> fw-rev: 1.5 scheme: GPT
ID-4: /dev/sdc maj-min: 8:32 vendor: Generic model: STORAGE DEVICE
size: 999.02 GiB block-size: physical: 512 B logical: 512 B type: USB
rev: 2.1 spd: 480 Mb/s lanes: 1 mode: 2.0 tech: N/A serial: <filter>
fw-rev: 1532 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 3.66 TiB size: 3.6 TiB (98.40%) used: 1.73 TiB (48.1%)
fs: ext4 dev: /dev/nvme1n1p2 maj-min: 259:6 label: N/A
uuid: 319bf7d3-8a5c-4792-8db7-4df6981a2bbc
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 296 KiB (0.1%) fs: vfat dev: /dev/nvme1n1p1 maj-min: 259:5 label: N/A
uuid: 1B4B-4B52
ID-3: /mnt/data raw-size: 952.65 GiB size: 936.63 GiB (98.32%)
used: 885 GiB (94.5%) fs: ext4 dev: /dev/nvme0n1p3 maj-min: 259:3 label: N/A
uuid: ac045e9d-3702-464e-b302-e3f3272276ee
ID-4: /mnt/data2 raw-size: 237.5 GiB size: 232.71 GiB (97.98%)
used: 203.98 GiB (87.7%) fs: ext4 dev: /dev/sda3 maj-min: 8:3 label: N/A
uuid: 5ee340bd-d824-4be0-9bf9-ca6b25e2cd31
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes
compressor: zstd max-pool: 20%
ID-1: swap-1 type: partition size: 68.98 GiB used: 1024 KiB (0.0%)
priority: -2 dev: /dev/nvme1n1p3 maj-min: 259:7 label: swap
uuid: fc9e3ee8-7dee-416a-a1ec-e6d6b877967c
Unmounted:
ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 512 MiB fs: vfat label: N/A
uuid: C03F-3115
ID-2: /dev/nvme0n1p2 maj-min: 259:2 size: 732 MiB fs: ext4 label: N/A
uuid: 127196f1-376c-432a-a3ce-482b654b06f9
ID-3: /dev/sda1 maj-min: 8:1 size: 512 MiB fs: vfat label: N/A
uuid: 8CF4-A3A8
ID-4: /dev/sda2 maj-min: 8:2 size: 488 MiB fs: ext2 label: N/A
uuid: 1134c2dc-a524-44e1-bb1a-5aa54c90e38e
ID-5: /dev/sdc1 maj-min: 8:33 size: 999.02 GiB fs: vfat label: N/A
uuid: F6CD-5F81
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 6 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-2: 1-1:15 info: Realtek RTS5411 Hub ports: 6 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 0bda:5411
class-ID: 0900
Device-1: 1-1.3:16 info: Integrated Express ITE Device(8595)
type: keyboard driver: hid-generic,usbhid interfaces: 1 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
chip-ID: 048d:8295 class-ID: 0301
Device-2: 1-1.6:17 info: Realtek HID Device type: HID
driver: hid-generic,usbhid interfaces: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 0bda:1100 class-ID: 0300
Hub-3: 1-3:2 info: ATEN USB2.1 Hub ports: 4 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 0557:5411
class-ID: 0900
Hub-4: 1-3.1:12 info: Fresco Logic USB2.0 Hub ports: 5 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d5c:5012
class-ID: 0900
Device-1: 1-3.1.1:13 info: Realtek RTL8153 Gigabit Ethernet Adapter
type: Network driver: r8152 interfaces: 1 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 200mA
chip-ID: 0bda:8153 class-ID: 0000 serial: <filter>
Device-2: 1-3.1.2:14 info: Genesys Logic SD Card Reader and Writer
type: mass storage driver: usb-storage interfaces: 1 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
chip-ID: 05e3:0749 class-ID: 0806 serial: <filter>
Hub-5: 1-3.3:6 info: ATEN Hub ports: 4 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 100mA chip-ID: 0557:8021 class-ID: 0900
Device-1: 1-3.3.1:8 info: ATEN CS1942DP_1944DP type: keyboard,mouse
driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 100mA chip-ID: 0557:2200 class-ID: 0301
Hub-6: 1-5:3 info: Genesys Logic Hub ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 05e3:0610 class-ID: 0900
Device-1: 1-5.3:7 info: ASUSTek AURA LED Controller type: HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 16mA chip-ID: 0b05:18f3 class-ID: 0300
serial: <filter>
Device-2: 1-6:5 info: Intel AX200 Bluetooth type: bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
power: 100mA chip-ID: 8087:0029 class-ID: e001
Hub-7: 2-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-8: 2-3:3 info: Realtek Hub ports: 2 rev: 3.2
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 0bda:0411
class-ID: 0900
Hub-9: 3-0:1 info: hi-speed hub with single TT ports: 6 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-10: 3-2:2 info: ASMedia ASM1074 High-Speed hub ports: 4 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 174c:2074 class-ID: 0900
Device-1: 3-5:3 info: STMicro Solo 4.1.2 type: HID
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 100mA chip-ID: 0483:a2ca class-ID: 0300
serial: <filter>
Hub-11: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-12: 4-2:2 info: ASMedia ASM1074 SuperSpeed hub ports: 4 rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 8mA
chip-ID: 174c:3074 class-ID: 0900
Hub-13: 5-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-14: 5-3:2 info: VIA Labs USB2.0 Hub ports: 4 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 2109:2817
class-ID: 0900
Device-1: 5-3.1:3 info: Logitech Webcam C930e type: video,audio
driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
chip-ID: 046d:0843 class-ID: 0102 serial: <filter>
Device-2: 5-3.2:4 info: Ultra-Link 8K type: mouse,keyboard,HID
driver: hid-generic,usbhid interfaces: 5 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
chip-ID: 362d:d028 class-ID: 0300
Device-3: 5-3.3:5 info: Keychron Q0 type: keyboard,HID
driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 500mA chip-ID: 3434:0130 class-ID: 0300
serial: <filter>
Device-4: 5-3.4:6 info: Keychron Q3 keychron/q3/iso_encoder
type: keyboard,HID driver: hid-generic,usbhid interfaces: 3 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 500mA
chip-ID: 3434:0123 class-ID: 0300 serial: <filter>
Hub-15: 6-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 47.0 C mobo: 38.0 C gpu: nvidia temp: 50 C
Fan Speeds (rpm): cpu: 0 gpu: nvidia fan: 0%
Repos:
Packages: 1893 pm: pacman pkgs: 1856 libs: 496
tools: gnome-software,pamac,yay pm: flatpak pkgs: 37
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://mirror.23m.com/manjaro/stable/$repo/$arch
2: https://mirror.netcologne.de/manjaro/stable/$repo/$arch
3: http://ftp.tu-chemnitz.de/pub/linux/manjaro/stable/$repo/$arch
4: https://ipng.mm.fcix.net/manjaro/stable/$repo/$arch
5: https://mirror.ibakerserver.pt/manjaro/stable/$repo/$arch
6: https://quantum-mirror.hu/mirrors/pub/manjaro/stable/$repo/$arch
7: https://mirrors.ocf.berkeley.edu/manjaro/stable/$repo/$arch
8: https://mirror.archlinux.tw/Manjaro/stable/$repo/$arch
Processes:
CPU top: 5 of 640
1: cpu: 12.5% command: tracker-extract-3 pid: 162172 mem: 31.5 MiB (0.0%)
2: cpu: 9.6% command: vivaldi-bin pid: 154403 mem: 399.7 MiB (0.6%)
3: cpu: 7.2% command: vivaldi-bin pid: 161629 mem: 315.9 MiB (0.4%)
4: cpu: 4.5% command: gnome-shell pid: 1466 mem: 911.6 MiB (1.4%)
5: cpu: 3.2% command: vivaldi-bin pid: 4377 mem: 1232.9 MiB (1.9%)
Memory top: 5 of 640
1: mem: 1392.7 MiB (2.1%) command: thunderbird pid: 119238 cpu: 2.8%
2: mem: 1232.9 MiB (1.9%) command: vivaldi-bin pid: 4377 cpu: 3.2%
3: mem: 1065.3 MiB (1.6%) command: vivaldi-bin pid: 3078 cpu: 1.3%
4: mem: 911.6 MiB (1.4%) command: gnome-shell pid: 1466 cpu: 4.5%
5: mem: 769.6 MiB (1.1%) command: ./jetbrains-toolbox pid: 1696 cpu: 0.2%
Info:
Processes: 640 Power: uptime: 15h 7m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 25.04 GiB services: gsd-power,
power-profiles-daemon, upowerd Init: systemd v: 256 default: graphical
tool: systemctl
Compilers: clang: 18.1.8 gcc: 14.2.1 alt: 13 Shell: Zsh v: 5.9
running-in: terminator inxi: 3.3.36
   ~  pactl list sinks  ✔  
Sink #57
State: IDLE
Name: alsa_output.pci-0000_0e_00.4.analog-stereo
Description: Starship/Matisse HD Audio Controller Analog Stereo
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 26241 / 40% / -23,85 dB, front-right: 26241 / 40% / -23,85 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.pci-0000_0e_00.4.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.class = "generic"
alsa.components = "HDA:10ec1220,104387c4,00100101"
alsa.device = "0"
alsa.driver_name = "snd_hda_intel"
alsa.id = "Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfc500000 irq 145"
alsa.mixer_name = "Realtek ALC1220"
alsa.name = "ALC1220 Analog"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "HD-Audio Generic at 0xfc500000 irq 145"
api.alsa.card.name = "HD-Audio Generic"
api.alsa.path = "front:1"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "5"
device.api = "alsa"
device.class = "sound"
device.id = "51"
device.profile.description = "Analog Stereo"
device.profile.name = "analog-stereo"
device.routes = "2"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Starship/Matisse HD Audio Controller"
node.name = "alsa_output.pci-0000_0e_00.4.analog-stereo"
node.nick = "ALC1220 Analog"
node.pause-on-idle = "false"
object.path = "alsa:acp:Generic:5:playback"
port.group = "playback"
priority.driver = "1009"
priority.session = "1009"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "47"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "57"
object.serial = "57"
node.max-latency = "16384/48000"
api.alsa.period-size = "1024"
api.alsa.period-num = "32"
api.alsa.headroom = "0"
api.acp.auto-port = "false"
api.alsa.card = "1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "pci"
device.bus_path = "pci-0000:0e:00.4"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_0e_00.4"
device.nick = "HD-Audio Generic"
device.plugged.usec = "10637582"
device.product.id = "0x1487"
device.product.name = "Starship/Matisse HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0e:00.4/sound/card1"
device.vendor.id = "0x1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.string = "1"
Ports:
analog-output-lineout: Line-Ausgang (type: Line, priority: 9000, availability group: Legacy 4, available)
analog-output-headphones: Kopfhörer (type: Headphones, priority: 9900, availability group: Legacy 5, not available)
Active Port: analog-output-lineout
Formats:
pcm
Sink #573
State: IDLE
Name: alsa_output.pci-0000_0c_00.1.hdmi-stereo
Description: AD102 High Definition Audio Controller Digital Stereo (HDMI)
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 38012 / 58% / -14,19 dB, front-right: 38012 / 58% / -14,19 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.pci-0000_0c_00.1.hdmi-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.class = "generic"
alsa.components = "HDA:10de00a3,19da1675,00100100"
alsa.device = "3"
alsa.driver_name = "snd_hda_intel"
alsa.id = "NVidia"
alsa.long_card_name = "HDA NVidia at 0xfb080000 irq 143"
alsa.mixer_name = "Nvidia GPU a3 HDMI/DP"
alsa.name = "PHL 329P1"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "HDA NVidia at 0xfb080000 irq 143"
api.alsa.card.name = "HDA NVidia"
api.alsa.path = "hdmi:0"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "4"
device.api = "alsa"
device.class = "sound"
device.id = "49"
device.profile.description = "Digital Stereo (HDMI)"
device.profile.name = "hdmi-stereo"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "AD102 High Definition Audio Controller"
node.name = "alsa_output.pci-0000_0c_00.1.hdmi-stereo"
node.nick = "PHL 329P1"
node.pause-on-idle = "false"
object.path = "alsa:acp:NVidia:4:playback"
port.group = "playback"
priority.driver = "696"
priority.session = "696"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "47"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "87"
object.serial = "573"
node.max-latency = "16384/48000"
api.alsa.period-size = "1024"
api.alsa.period-num = "32"
api.alsa.headroom = "0"
api.acp.auto-port = "false"
api.alsa.card = "0"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "pci"
device.bus_path = "pci-0000:0c:00.1"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_0c_00.1"
device.nick = "HDA NVidia"
device.plugged.usec = "10605803"
device.product.id = "0x22ba"
device.product.name = "AD102 High Definition Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:0c:00.1/sound/card0"
device.vendor.id = "0x10de"
device.vendor.name = "NVIDIA Corporation"
device.string = "0"
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, availability group: Legacy 1, available)
Active Port: hdmi-output-0
Formats:
pcm
Thanks!
For this, it looks like you have one monitor actually running on an analogue source and the other(s) running on HDMI audio source, but I could be mistaken here.
My suspicion is that the HDMI audio has only one possible (stereo) audio output channel. Not sure if Jack or Wireplumber could fix that? A bit like my old Dell machine having only 2 “pipes” for graphics? Although I wouldn’t think that to be the case with a decent graphics card? 
It looks like the primary monitor is the one using the analogue source.
Hopefully someone who knows more about this than I do will see this!
All three monitors are connected via DP. The silent one is new and has DP mini.
I have three audio devices for HDMI/Display Port output in gnome settings, one of them not working properly…
It could be a hardware limitation (I hope not); I guess something to try would be to spin up a Live session of one of the other DEs (Plasma or Xfce)? See if the results are the same there. Particularly Plasma, as I’d be in a better position to show where the settings are.
Will do…
inxi shows 3 monitors connected to system
Monitor-1: DP-1 mapped: DP-0 note: disabled pos: right model: Philips PHL 329P1 Monitor-2: DP-2 note: disabled pos: center model: Gigabyte AORUS FO32U2P Monitor-3: DP-3 mapped: DP-4 note: disabled pos: primary,left model: Acer XV322QK
pactl list sinks shows only one HDMI output sink available
Sink #573 State: IDLE Name: alsa_output.pci-0000_0c_00.1.hdmi-stereo Ports: hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, availability group: Legacy 1, available)
Please post more information about audio devices in PipeWire to show if the other two HDMI sinks are available
pactl list cards