For some reason, my 2 displayport screens aren’t being set to any resolution after turning them off and back on again. currently i’ve been working around it with an xrandr command. If i switch to a TTY window, it does work. I looked around but couldn’t seem to find anything online, so i hope someone can help me with this issue
Welcome to the forum! 
Please post your system info as outlined here:
Here you go:
System:
Kernel: 5.19.16-4-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.19-x86_64
root=UUID=da07754f-2038-47d3-a564-fc9794a0a969 rw quiet apparmor=1
security=apparmor udev.log_priority=3
Desktop: KDE Plasma v: 5.26.0 tk: Qt v: 5.15.6 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop System: Micro-Star product: MS-7C84 v: 1.0
serial: <superuser required>
Mobo: Micro-Star model: MAG X570 TOMAHAWK WIFI (MS-7C84) v: 1.0
serial: <superuser required> UEFI: American Megatrends LLC. v: 1.50
date: 01/20/2021
Battery:
ID-1: hidpp_battery_0 charge: 24% condition: N/A volts: 3.7 min: N/A
model: Logitech G502 LIGHTSPEED Wireless Gaming Mouse type: N/A
serial: <filter> status: discharging
Device-1: nintendo_switch_controller_battery_0003:057E:2009.0024
model: N/A serial: N/A charge: Full status: full
Memory:
RAM: total: 31.27 GiB used: 15.94 GiB (51.0%)
RAM Report: permissions: Unable to run dmidecode. Root privileges
required.
CPU:
Info: model: AMD Ryzen 9 5950X bits: 64 type: MT MCP arch: Zen 3 gen: 4
level: v3 note: check built: 2021-22 process: TSMC n7 (7nm)
family: 0x19 (25) model-id: 0x21 (33) stepping: 0 microcode: 0xA201009
Topology: cpus: 1x cores: 16 tpc: 2 threads: 32 smt: enabled cache:
L1: 1024 KiB desc: d-16x32 KiB; i-16x32 KiB L2: 8 MiB desc: 16x512 KiB
L3: 64 MiB desc: 2x32 MiB
Speed (MHz): avg: 2880 high: 3601 min/max: 2200/5176 boost: enabled
scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 3600 2: 2879
3: 3600 4: 2880 5: 2879 6: 2200 7: 2880 8: 2880 9: 2200 10: 3599 11: 3601
12: 2652 13: 2881 14: 2880 15: 2880 16: 3138 17: 2984 18: 2879 19: 2200
20: 2879 21: 2880 22: 2883 23: 2878 24: 2200 25: 2200 26: 3600 27: 3497
28: 2632 29: 2879 30: 2200 31: 2879 32: 2880 bogomips: 217698
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists erms extapic
extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht
hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt
pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor
svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl
v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt
xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA AD102 [GeForce RTX 4090] vendor: Gigabyte driver: nvidia
v: 520.56.06 alternate: nouveau,nvidia_drm non-free: 515.xx+ status: current
(as of 2022-10) arch: Lovelace code: AD1xx process: TSMC n4 (5nm)
built: 2022-23+ pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 2d:00.0
chip-ID: 10de:2684 class-ID: 0300
Display: x11 server: X.Org v: 21.1.4 compositor: kwin_x11 driver: X:
loaded: nvidia gpu: nvidia display-ID: :0 screens: 1
Screen-1: 0 s-res: 6440x2560 s-dpi: 101 s-size: 1620x644mm (63.78x25.35")
s-diag: 1743mm (68.63")
Monitor-1: DP-1 pos: bottom-l res: 1920x1080 hz: 60 dpi: 102
size: 477x268mm (18.78x10.55") diag: 547mm (21.54") modes: N/A
Monitor-2: DP-2 pos: top-right res: 1080x2560 dpi: 82
size: 334x798mm (13.15x31.42") diag: 865mm (34.06") modes: N/A
Monitor-3: DP-4 pos: primary,middle-c res: 3440x1440 dpi: 109
size: 800x330mm (31.5x12.99") diag: 865mm (34.07") modes: N/A
OpenGL: renderer: NVIDIA GeForce RTX 4090/PCIe/SSE2 v: 4.6.0 NVIDIA
520.56.06 direct render: Yes
Audio:
Device-1: NVIDIA vendor: Gigabyte driver: snd_hda_intel v: kernel pcie:
gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 2d:00.1 chip-ID: 10de:22ba
class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 2f:00.4 chip-ID: 1022:1487 class-ID: 0403
Sound API: ALSA v: k5.19.16-4-MANJARO running: yes
Sound Server-1: JACK v: 1.9.21 running: no
Sound Server-2: PulseAudio v: 16.1 running: no
Sound Server-3: PipeWire v: 0.3.59 running: yes
Network:
Device-1: Realtek RTL8125 2.5GbE vendor: Micro-Star MSI driver: r8169
v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 port: f000 bus-ID: 26:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: enp38s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 28:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlo1 state: down mac: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-4:4
chip-ID: 8087:0029 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 5.69 TiB used: 3.29 TiB (57.9%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 PRO 2TB
size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 type: SSD serial: <filter> rev: 3B2QGXA7 temp: 34.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:3 vendor: Samsung model: SSD 970 EVO 1TB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 type: SSD serial: <filter> rev: 2B2QEXE7 temp: 33.9 C
ID-3: /dev/sda maj-min: 8:0 vendor: Crucial model: CT250BX100SSD1
size: 232.89 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
type: SSD serial: <filter> rev: MU02
ID-4: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST1000DM003-1CH162
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
type: HDD rpm: 7200 serial: <filter> rev: CC47
ID-5: /dev/sdc maj-min: 8:32 vendor: Western Digital
model: WD2003FZEX-00SRLA0 size: 1.82 TiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: 1A01
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 1.82 TiB size: 1.79 TiB (98.37%) used: 1.24 TiB (69.3%)
fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2 label: N/A
uuid: da07754f-2038-47d3-a564-fc9794a0a969
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%) used: 288 KiB
(0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: NO_LABEL
uuid: 4C07-EFBC
ID-3: /mnt/1tb-hdd raw-size: 931.51 GiB size: 915.82 GiB (98.31%)
used: 70.25 GiB (7.7%) fs: ext4 dev: /dev/sdb maj-min: 8:16 label: 1TB HDD
uuid: d2b22a2c-9fc6-4ad9-8278-625c66b640ca
ID-4: /mnt/970-evo raw-size: 931.51 GiB size: 915.82 GiB (98.31%)
used: 704.07 GiB (76.9%) fs: ext4 dev: /dev/nvme1n1 maj-min: 259:3
label: 970 EVO uuid: 5b3737f4-261a-4d3a-91f9-c508785c6341
ID-5: /mnt/crucial-ssd raw-size: 232.89 GiB size: 228.17 GiB (97.98%)
used: 20.61 GiB (9.0%) fs: ext4 dev: /dev/sda maj-min: 8:0
label: crucial-ssd uuid: 83da9c4d-444f-4d13-b7c7-406ec9147500
ID-6: /mnt/wd-black raw-size: 1.82 TiB size: 1.79 TiB (98.37%) used: 1.28
TiB (71.4%) fs: ext4 dev: /dev/sdc maj-min: 8:32 label: WD Black
uuid: f1243109-6ce5-4a4a-93ce-d5b096853c1c
Swap:
Alert: No swap data was found.
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 6 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-4:4 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029
class-ID: e001
Hub-2: 1-6:5 info: Genesys Logic Hub ports: 4 rev: 2.1 speed: 480 Mb/s
power: 100mA chip-ID: 05e3:0610 class-ID: 0900
Device-1: 1-6.1:6 info: Logitech Cordless Mouse Receiver
type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3
rev: 2.0 speed: 12 Mb/s power: 98mA chip-ID: 046d:c539 class-ID: 0300
Device-2: 1-6.3:9 info: Glorious GMMK Pro type: Keyboard,HID
driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s
power: 500mA chip-ID: 320f:5044 class-ID: 0300 serial: <filter>
Device-3: 1-6.4:10 info: Nintendo Switch Pro Controller type: HID
driver: nintendo,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 500mA
chip-ID: 057e:2009 class-ID: 0300 serial: <filter>
Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-4: 3-0:1 info: Hi-speed hub with single TT ports: 6 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-5: 3-2:2 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
power: 100mA chip-ID: 05e3:0605 class-ID: 0900
Device-1: 3-5:3 info: Micro Star MYSTIC LIGHT type: HID
driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s
power: 500mA chip-ID: 1462:7c84 class-ID: 0300 serial: <filter>
Hub-6: 3-6:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
power: 100mA chip-ID: 05e3:0608 class-ID: 0900
Hub-7: 4-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-8: 5-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-9: 6-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 49.1 C mobo: N/A gpu: nvidia temp: 34 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 60%
Info:
Processes: 523 Uptime: 19h 18m wakeups: 83 Init: systemd v: 251
default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 11
clang: 14.0.6 Packages: 1384 pm: pacman pkgs: 1371 libs: 354
tools: pamac,yay pm: flatpak pkgs: 13 Shell: Zsh v: 5.9 running-in: konsole
inxi: 3.3.22
Seems there was a bug report created for the issue i seem to have as well