I’m going to start this out by mentioning that I previously had an Nvidia GPU.
I now have a new GPU, but now when I start my PC, I only get this:
/dev/sdb2: recovering journal
/dev/sdb2: clean, 2770081/28712960 files, 92343931/114828068 blocks
I have tried looking for a solution for this
https://www.reddit.com/r/ManjaroLinux/s/yEaJ49E3ef
But this did not work.
Thx in advance 
inxi in a terminal or in console.sudo inxi --admin --verbosity=7 --filter --no-host --width
(Wisdom lies in asking → listening → reading 
)
I cannot send you this output. I am currently in my shell. If I was able to send output here I would’ve.
(Also I know you probably copy that text but it comes off as extremely patronizing)
If possible, try to use a live-manjaro
You even can compare the inxi from there, with the inxi you get now from tty.
(or even better post both)
Most people don’t say how familiar they are with:
It is possible to retrieve this information individually. And you will find threads that have >100 posts because important information was missing at the beginning.
Therefore, the “demand” for information is necessary so that anyone who reads it can see if they can help you in any way. (also translated )
here it is
System:
Kernel: 6.1.30-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC
misobasedir=manjaro misolabel=MANJARO_GNOME_2213 quiet
systemd.show_status=1 splash driver=free nouveau.modeset=1 i915.modeset=1
radeon.modeset=1
Desktop: GNOME v: 43.5 tk: GTK v: 3.24.37 wm: gnome-shell dm: GDM v: 44.0
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop Mobo: Micro-Star model: B550-A PRO (MS-7C56) v: 1.0
serial: <filter> UEFI: American Megatrends LLC. v: A.50 date: 01/15/2021
Battery:
Message: No system battery data found. Is one present?
Memory:
System RAM: available: 7.68 GiB used: 2.22 GiB (28.9%)
Array-1: capacity: 128 GiB slots: 4 EC: None max-module-size: 32 GiB
note: est.
Device-1: DIMM 0 type: no module installed
Device-2: DIMM 1 type: no module installed
Device-3: DIMM 0 type: no module installed
Device-4: DIMM 1 type: DDR4 detail: synchronous unbuffered (unregistered)
size: 8 GiB speed: 3000 MT/s volts: curr: 1.2 min: 1.2 max: 1.2 width (bits):
data: 64 total: 64 manufacturer: Crucial part-no: BL8G30C15U4B.M8FE1
serial: <filter>
CPU:
Info: model: AMD Ryzen 5 3500X socket: AM4 bits: 64 type: MCP arch: Zen 2
gen: 3 level: v3 note: check built: 2020-22 process: TSMC n7 (7nm)
family: 0x17 (23) model-id: 0x71 (113) stepping: 0 microcode: 0x8701021
Topology: cpus: 1x cores: 6 smt: <unsupported> cache: L1: 384 KiB
desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB L3: 32 MiB
desc: 2x16 MiB
Speed (MHz): avg: 2433 high: 3600 min/max: 2200/4120 boost: enabled
base/boost: 3600/4100 scaling: driver: acpi-cpufreq governor: schedutil
volts: 1.1 V ext-clock: 100 MHz cores: 1: 2200 2: 2200 3: 3600 4: 2200
5: 2200 6: 2200 bogomips: 43215
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid
f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibs
irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe
msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae
pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb
pfthreshold pge pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a
rdtscp rep_good sep sev sev_es sha_ni skinit smap smca smep ssbd sse sse2
sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext
tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme vmmcall
wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT disabled
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP:
disabled, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Navi 22 [Radeon RX 6700/6700 XT/6750 XT / 6800M/6850M XT]
vendor: Sapphire driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x
process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 16
ports: active: DP-3 empty: DP-1,DP-2,HDMI-A-1 bus-ID: 2d:00.0
chip-ID: 1002:73df class-ID: 0300
Display: server: X.org v: 1.21.1.8 with: Xwayland v: 23.1.1
compositor: gnome-shell driver: gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-size: <missing: xdpyinfo>
Monitor-1: DP-3 model: 27E1Q serial: <filter> built: 2021 res: 2560x1440
hz: 60 dpi: 108 gamma: 1.2 size: 600x330mm (23.62x12.99") diag: 685mm (27")
ratio: 16:9 modes: max: 2560x1440 min: 720x400
API: OpenGL v: 4.6 Mesa 23.0.3 renderer: AMD Radeon RX 6700 XT (navi22
LLVM 15.0.7 DRM 3.49 6.1.30-1-MANJARO) direct-render: Yes
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie:
gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 2d:00.1 chip-ID: 1002:ab28
class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 2f:00.4 chip-ID: 1022:1487 class-ID: 0403
API: ALSA v: k6.1.30-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 0.3.70 status: off tools: pw-cli
Server-3: PulseAudio v: 16.1 status: active (root, process)
with: pulseaudio-alsa type: plugin tools: pacat,pactl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Micro-Star MSI driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: f000 bus-ID: 2a:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp42s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Message: No bluetooth data found.
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 1.36 TiB used: 0 KiB (0.0%)
ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000DM010-2EP102
family: BarraCuda 3.5 (CMR) size: 931.51 GiB block-size: physical: 4096 B
logical: 512 B sata: 3.0 speed: 6.0 Gb/s tech: HDD rpm: 7200
serial: <filter> fw-rev: CC43 temp: 40 C scheme: GPT
SMART: yes state: enabled health: PASSED on: 1y 347d 20h cycles: 529
read: 47.36 TiB written: 62.6 TiB Pre-Fail: attribute: Spin_Retry_Count
value: 100 worst: 100 threshold: 97
ID-2: /dev/sdb maj-min: 8:16 vendor: Kingston model: SA400M8480G
family: Driven SSDs size: 447.13 GiB block-size: physical: 512 B
logical: 512 B sata: 3.2 speed: 6.0 Gb/s tech: SSD serial: <filter>
fw-rev: 62B3 temp: 40 C scheme: GPT
SMART: yes state: enabled health: PASSED on: 1y 345d 14h cycles: 529
read: 74627 GiB written: 29316 GiB
ID-3: /dev/sdc maj-min: 8:32 vendor: SanDisk model: Cruzer Blade
size: 14.91 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 2.0
spd: 480 Mb/s lanes: 1 mode: 2.0 tech: N/A serial: <filter> fw-rev: 1.00
scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Optical-1: /dev/sr0 vendor: MATSHITA model: DVD-RAM SW830 rev: 1.00
dev-links: cdrom
Features: speed: 48 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
Message: No partition data found.
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/sda1 maj-min: 8:1 size: 931.51 GiB fs: ext4 label: steam
uuid: 8429e1cf-59ff-4c60-8719-afef771111fb
ID-2: /dev/sdb1 maj-min: 8:17 size: 300 MiB fs: vfat label: NO_LABEL
uuid: 61E7-70C5
ID-3: /dev/sdb2 maj-min: 8:18 size: 438.03 GiB fs: ext4 label: N/A
uuid: 1ac35c4b-154d-4d98-94b4-2d5193b3401e
ID-4: /dev/sdb3 maj-min: 8:19 size: 8.8 GiB fs: swap label: N/A
uuid: 10f62d63-c416-461c-9990-b380d99d2019
ID-5: /dev/sdc1 maj-min: 8:33 size: 3.45 GiB fs: iso9660
ID-6: /dev/sdc2 maj-min: 8:34 size: 4 MiB fs: vfat label: MISO_EFI
uuid: D0A3-C7FC
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 10 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-2: 1-2:2 info: Genesys Logic Hub ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 05e3:0608 class-ID: 0900
Device-1: 1-2.3:4 info: SINOWEALTH Game Mouse type: mouse,keyboard
driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 256mA chip-ID: 258a:1007 class-ID: 0301
Device-2: 1-2.4:6 info: Microdia USB DEVICE type: keyboard,mouse
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 400mA chip-ID: 0c45:7698 class-ID: 0301
Device-3: 1-7:3 info: Micro Star MYSTIC LIGHT type: HID
driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 500mA chip-ID: 1462:7c56 class-ID: 0300
serial: <filter>
Device-4: 1-10:5 info: SanDisk Cruzer Blade type: mass storage
driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 power: 200mA chip-ID: 0781:5567 class-ID: 0806
serial: <filter>
Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-4: 3-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-5: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 53.8 C mobo: N/A gpu: amdgpu temp: 49.0 C
mem: 46.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 0
Info:
Processes: 272 Uptime: 1m wakeups: 0 Init: systemd v: 252 default: graphical
tool: systemctl Compilers: gcc: 12.2.1 clang: 15.0.7 Packages: pm: pacman
pkgs: 1240 libs: 315 tools: gnome-software,pamac pm: flatpak pkgs: 0
Shell: Zsh (sudo) v: 5.9 default: Bash v: 5.1.16 running-in: gnome-terminal
inxi: 3.3.27
Please I really need help
(I’m afraid it could get worse )
And all the people here help in their free time. Therefore, you may have to wait for someone to sign up who can help you.
In the meantime, you can re-read what has already been posted and linked, or you can try using forum search.
Hello @mattus,
did you install/uninstall/change graphic drivers before you change the gpu’s?
Normally if you still can login you can try to install the drivers with 'mhwd’ like discribed in the wiki.
This should install the right (nonfree) drivers:
sudo mhwd -a pci nonfree 0300
If you want to use the free drivers change 'nonfree’ to 'free'. This is what I would try at first. 
You can also save command output to a file from within a TTY.
Here is an example:
sudo inxi --admin --verbosity=7 --filter --no-host --width > ~/output.txt
Notice the > ~/output.txt at the end? This effectively redirects the output that would have been printed to screen, to the named text file instead. In this way you can take that file and post the content later, any way you see fit.
The drivers seem to be installed already,
I get the result:
> Skipping already installed config 'video-linux' for device: 0000:2d:00.0 (0300:1200:73df) Display controller in ATI Technologies Inc Navi 22 [Radeon RX 6700/6700 XT / 6800M]
There is a recent thread Switch from Nvidia gpu to Amd gpu basically on the same topic that might be helpful.
I have now made progress and it’s booting but stops at
Starting Hold until boot process finishes up...
Starting Terminate Plymouth Boot Screen...
post pic of:
mhwd -l -li
ls /etc/modprobe.d
find /etc/X11/ -name "*.conf"
it didnt detected any available drivers… check again with:
mhwd -l
and:
inxi -G
so you are in chroot? so you can normally boot into manjaro live usb?
post output also from:
mhwd-kernel -li
and:
pacman -Qm
and if you can provide normal text output …
Plymouth is unnecessary and can often cause boot issues. I suggest you uninstall it according to the instructions at Plymouth Manjaro under the heading Removal. Cheers.
Aside:- Once you’re up and running again, you might like to take a look at RustDesk as an alternative to anydesk-bin.
yeah, i am in chroot. I didn’t want to manually take photos of my screen.
Anyways, here’s the stuff:
sudo chroot /run/media/manjaro/1ac35c4b-154d-4d98-94b4-2d5193b3401e
[manjaro-gnome /]# mhwd-kernel -li
Currently running: 6.1.30-1-MANJARO (linux61)
The following kernels are installed in your system:
* linux419
* linux510
[manjaro-gnome /]# pacman -Qm
android-emulator 33.1.23-1
android-sdk 26.1.1-2
android-studio 2023.1.1.26-1
anydesk-bin 6.3.0-1
archlinux-java-run 10-1
arcus 5.0.0-3
audiorelay 0.27.5-3
balena-etcher 2:1.18.13-1
breath2-wallpaper 1.0.18-5
cef-minimal 119.4.3-1
celt 0.11.3-6
cura 5.3.0-1
cura-resources-materials 5.6.0-1
curaengine 4.13.1-3
debtap 3.5.1-1
ebsynth-git r16.2f5c97c-1
electron19 19.1.9-5
electron7-bin 7.3.3-5
evince-no-gnome 44.1-1
gamemaker-beta 2023.200.0.299-1
gb-studio 3.1.0-1
gconf 3.2.6+11+g07808097-10
genymotion 3.5.1-1
gnome-icon-theme 3.12.0-7
gnome-icon-theme-symbolic 3.12.0-6
google-chrome 120.0.6099.71-1
gtk-theme-breath 5.9.0-1
jre 21.0.1-1
js78 78.15.0-4
libcpufeatures-git 0.7.0+15.r284.d20220617.3c4801d-1
libgbinder 1.1.35-1
libglibutil 1.0.74-1
libopenaptx 0.2.0-1
libsavitar 4.13.0-1
libsidplay 1.36.59-10
lxc-git 4.0.0.r2149.g2ac414d56-1
manjaro-documentation-en 20181009-1
manjaro-firmware 20160419-1
mcreator 2023.3.36712-1
minecraft-launcher 1:1.0.1221-1
multimc-bin 0.7.0.3809-1
noto-fonts-compat 20151217-1
opencolorio1 1.1.1-3
parsec-bin 150_86e-4
python-argparse 1.4.0-14
python-backcall 0.2.0-8
python-gbinder 1.1.2-1
python-mapbox-earcut 1.0.1-1
python-pep517 0.13.0-4
python-progress 1.6-8
python-pyglet 2.0.10-1
python-pyinstrument 4.6.1-1
python-pynest2d 4.12.0-1
python-sip4 4.19.25-5
python-svg.path 6.2-1
python-trimesh 4.0.5-1
qt5-webkit 5.212.0alpha4-20
rarcrack 0.2-6
sidequest-bin 0.10.38-1
steamcmd latest-3
substance-painter 8.1.3-1
systemd-fsck-silent 239-1
teamviewer 15.48.4-1
transcode 1.1.7-42
twitch-bin 1.0.4-8
uranium 5.0.0-2
urn-git r133.09c0756-1
visual-studio-code-bin 1.85.0-1
waydroid 1.4.2-1
waydroid-image-gapps 18.1_20231125-1
wine-gui-git 0.14alpha.54.gff60462-1
xclicker 1.5.0-1
xkb-switch 1.8.5-1
xp-pen-tablet 1:3.2.3.220323-3
yay-git 12.2.0.r1.g643830f-1
these are your kernels, they are older, so install a newer one, the 6.1:
pacman -S linux61
remove this:
pacman -R celt breath2-wallpaper manjaro-documentation-en manjaro-firmware
exit chroot and reboot…