Crashing Randomly During Idle After Last Update?

[Sarah]

Ever since the last update, when I leave my computer for the night, I come back to it being frozen. Typically the process takes 2 hours (since I know when I went to sleep, and the clock is frozen in place when I return)

Not sure what is happening
Current Idle in the BIOS Settings is set to: Typical Current Idle (just in case this was the issue)

Journal CTL Log (journalctl -b which is far too long to post here):

X.txt

System Specs:

System:
  Host: MidnightStarSign Kernel: 5.12.1-2-MANJARO x86_64 bits: 64 compiler: gcc 
  v: 10.2.0 Desktop: KDE Plasma 5.21.4 Distro: Manjaro Linux base: Arch Linux 
Machine:
  Type: Desktop Mobo: ASUSTeK model: PRIME X570-PRO v: Rev X.0x 
  serial: <superuser required> UEFI: American Megatrends v: 3001 date: 12/04/2020 
CPU:
  Info: 16-Core model: AMD Ryzen 9 5950X bits: 64 type: MT MCP arch: Zen 3 rev: 0 
  cache: L2: 8 MiB 
  flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm 
  bogomips: 217665 
  Speed: 3647 MHz min/max: 2200/3400 MHz boost: enabled Core speeds (MHz): 1: 3647 
  2: 2989 3: 2277 4: 2515 5: 2555 6: 2339 7: 2506 8: 2420 9: 3126 10: 3199 11: 3195 
  12: 4077 13: 3009 14: 3958 15: 3519 16: 3152 17: 3033 18: 2332 19: 3316 20: 2546 
  21: 2338 22: 2617 23: 2519 24: 3396 25: 2905 26: 2631 27: 3711 28: 3843 29: 3068 
  30: 3109 31: 2479 32: 2471 
Graphics:
  Device-1: AMD Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] vendor: ASRock 
  driver: amdgpu v: kernel bus-ID: 0c:00.0 
  Device-2: Microdia USB 2.0 Camera type: USB driver: snd-usb-audio,uvcvideo 
  bus-ID: 7-1:2 
  Display: x11 server: X.Org 1.20.11 driver: loaded: amdgpu,ati 
  unloaded: modesetting,radeon resolution: 1: 1920x1080~60Hz 2: 1920x1080~60Hz 
  3: 1920x1080~60Hz 
  OpenGL: 
  renderer: AMD Radeon RX 5600 XT (NAVI10 DRM 3.40.0 5.12.1-2-MANJARO LLVM 11.1.0) 
  v: 4.6 Mesa 21.0.3 direct render: Yes 
Audio:
  Device-1: AMD Navi 10 HDMI Audio driver: snd_hda_intel v: kernel bus-ID: 0c:00.1 
  Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK driver: snd_hda_intel 
  v: kernel bus-ID: 0f:00.4 
  Device-3: JMTek LLC. Plugable USB Audio Device type: USB 
  driver: hid-generic,snd-usb-audio,usbhid bus-ID: 3-1:2 
  Device-4: Schiit Audio Schiit Modi 3+ type: USB driver: snd-usb-audio 
  bus-ID: 3-2:3 
  Device-5: ASUSTek ASUS AI Noise-Cancelling Mic Adapter type: USB 
  driver: hid-generic,snd-usb-audio,usbhid bus-ID: 5-5:3 
  Device-6: Microdia USB 2.0 Camera type: USB driver: snd-usb-audio,uvcvideo 
  bus-ID: 7-1:2 
  Sound Server-1: ALSA v: k5.12.1-2-MANJARO running: yes 
  Sound Server-2: JACK v: 0.125.0 running: no 
  Sound Server-3: PulseAudio v: 14.2 running: yes 
  Sound Server-4: PipeWire v: 0.3.26 running: yes 
Network:
  Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel 
  port: f000 bus-ID: 06:00.0 
  IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: 24:4b:fe:5b:08:2a 
Bluetooth:
  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB 
  driver: btusb v: 0.8 bus-ID: 3-5.3:6 
  Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends 
Drives:
  Local Storage: total: 7.33 TiB used: 1.95 TiB (26.6%) 
  ID-1: /dev/nvme0n1 vendor: Western Digital model: WDS100T3X0C-00SJG0 
  size: 931.51 GiB 
  ID-2: /dev/nvme1n1 vendor: Western Digital model: WDS100T2B0C-00PXH0 
  size: 931.51 GiB 
  ID-3: /dev/nvme2n1 vendor: Intel model: SSDPE2KX040T7K size: 3.64 TiB 
  ID-4: /dev/sda vendor: Seagate model: ST2000LM015-2E8174 size: 1.82 TiB 
  ID-5: /dev/sdb type: USB vendor: Toshiba model: TransMemory size: 14.92 GiB 
  ID-6: /dev/sdc type: USB vendor: SanDisk model: Gaming Xbox 360 size: 7.48 GiB 
  ID-7: /dev/sdd type: USB model: N/A size: 29.3 GiB 
Partition:
  ID-1: / size: 767 GiB used: 723.37 GiB (94.3%) fs: btrfs dev: /dev/dm-0 
  mapped: luks-466d5812-64c7-4a28-bcc4-a1a5adfa9450 
  ID-2: /boot/efi size: 511 MiB used: 26.1 MiB (5.1%) fs: vfat dev: /dev/nvme0n1p1 
  ID-3: /home size: 767 GiB used: 723.37 GiB (94.3%) fs: btrfs dev: /dev/dm-0 
  mapped: luks-466d5812-64c7-4a28-bcc4-a1a5adfa9450 
Swap:
  ID-1: swap-1 type: partition size: 64 GiB used: 46.8 MiB (0.1%) dev: /dev/dm-1 
  mapped: luks-81b2dc57-06f5-4471-b484-77c3a516f307 
Sensors:
  System Temperatures: cpu: 65.9 C mobo: 0 C gpu: amdgpu temp: 43.0 C 
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 0 
Info:
  Processes: 861 Uptime: 19m Memory: 62.78 GiB used: 17.58 GiB (28.0%) Init: systemd 
  Compilers: gcc: 10.2.0 clang: 11.1.0 Packages: 1957 Shell: Bash v: 5.1.4 
  inxi: 3.3.04

[Fabby]

@Sarah

Journal CTL Log (journalctl -b which is far too long to post here):

Please read this:

[HowTo] post screenshots and links

Difficulty: ★☆☆☆☆ You’ve probably been sent here by a more experienced user because you cannot post links nor screenshots so please follow the simple instructions of this tutorial below to allow you to post both screenshots and links in any post and have a short explanation of why you can’t do this easily… If you’re reading this in response to a question, please click the green link above this text to bring you to the full unabridged text of the tutorial itself. If you …

Because:

@Sarah

Kernel: 5.12.1-2-MANJARO

Do you have any compelling reason to be on 5.12 Stable and have you tried 5.10 LTS already? If not, try that first and 5.4 LTS next if 5.10 wouldn’t work.

If you’re asking yourself Why? then please read this especially the section “Linux has multiple kernels”