I upgraded with no problems to the stable release 2022-02-27. As a final step I wanted to update my AUR packages. I used:
pamac upgrade -a
After the above command, I got the following error:
Warning: installing jack (0.126.0-3) breaks dependency 'libjack.so=0-64' required by audacity
Add audacity to remove
Error: Failed to prepare transaction:
could not satisfy dependencies:
- installing jack (0.126.0-3) breaks dependency 'libjack.so=0-64' required by fluidsynth
- if possible, remove fluidsynth and retry
Resolving dependencies...
Checking inter-conflicts...
Error: Failed to prepare transaction:
could not satisfy dependencies:
- installing jack (0.126.0-3) breaks dependency 'libjack.so=0-64' required by fluidsynth
- if possible, remove fluidsynth and retry
Edit2: I cannot go forward with installing packages or removing them if necessary until I get rid of the conflict between installing jack and/or removing fluidsynth. I don’t know if I should remove fluidsynth or not. Or if there is another solution.
Not sure how to proceed with this one. So far i have not removed anything yet. I read the solution for jack2 and pipewire in this post:
Mine is with jack and fluidsynth. What should I do in this case? I have Audacity installed and I would like to keep it. Should I uninstall fluidsynth and reinstall it later, or should I uninstall Audacity and then reinstall it later?. I really would like to keep it if possible. I have noticed that fluidsynth has a lot dependencies.
I forgot to provide my system info:
`inxi --full --admin --verbosity=7 --filter --no-host
System:
Kernel: 5.16.2-2-rt19-MANJARO x86_64 bits: 64 compiler: gcc v: 11.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.16-rt-x86_64
root=UUID=920f72cd-bba8-4638-bd56-2c95fa695fdc rw quiet apparmor=1
security=apparmor resume=UUID=29279fc2-08a7-4ece-a1ee-c14a14c56eda
udev.log_priority=3
Desktop: KDE Plasma 5.24.2 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: TOSHIBA product: Satellite A505 v: PSAT0U-01F001
serial: <superuser required>
Mobo: TOSHIBA model: Portable PC serial: <superuser required>
BIOS: INSYDE v: 1.80 date: 05/25/2010
Battery:
ID-1: BAT0 charge: 89.7 Wh (100.0%) condition: 89.7/97.2 Wh (92.3%)
volts: 10.8 min: 10.8 model: PA3727U-1BRS type: Li-ion serial: <filter>
status: Full
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse PID:0080
serial: N/A charge: 55% (should be ignored) rechargeable: yes
status: Discharging
Memory:
RAM: total: 3.71 GiB used: 2.73 GiB (73.5%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Core2 Duo T6600 bits: 64 type: MCP arch: Core Yorkfield
family: 6 model-id: 0x17 (23) stepping: 0xA (10) microcode: 0xA0B
Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 2 MiB desc: 1x2 MiB
Speed (MHz): avg: 1435 high: 1588 min/max: 1200/2200 scaling:
driver: acpi-cpufreq governor: schedutil cores: 1: 1282 2: 1588
bogomips: 8778
Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc
cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts est fpu fxsr ht lahf_lm lm mca
mce mmx monitor msr mtrr nopl nx pae pat pbe pdcm pebs pge pni pse pse36
pti rep_good sep sse sse2 sse4_1 ssse3 syscall tm tm2 tsc vme xsave xtpr
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds
status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
Type: meltdown mitigation: PTI
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Full generic retpoline, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Mobile 4 Series Integrated Graphics vendor: Toshiba
driver: i915 v: kernel ports: active: LVDS-1
empty: DP-1, DP-2, HDMI-A-1, VGA-1 bus-ID: 00:02.0 chip-ID: 8086:2a42
class-ID: 0300
Device-2: Chicony USB2.0 UVC WebCam type: USB driver: uvcvideo
bus-ID: 1-2:2 chip-ID: 04f2:b128 class-ID: 0e02
Display: x11 server: X.Org v: 1.21.1.3 compositor: kwin_x11 driver: X:
loaded: modesetting alternate: fbdev,vesa gpu: i915 display-ID: :0
screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.2x8.0")
s-diag: 414mm (16.3")
Monitor-1: LVDS-1 model: Seiko Epson built: 2008 res: 1366x768 hz: 60
dpi: 98 gamma: 1.2 size: 353x198mm (13.9x7.8") diag: 405mm (15.9")
ratio: 16:9 modes: 1366x768
OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express (CTG)
v: 2.1 Mesa 21.3.7 direct render: Yes
Audio:
Device-1: Intel 82801I HD Audio vendor: Toshiba driver: snd_hda_intel
v: kernel bus-ID: 00:1b.0 chip-ID: 8086:293e class-ID: 0403
Sound Server-1: ALSA v: k5.16.2-2-rt19-MANJARO running: yes
Sound Server-2: JACK v: 0.125.0 running: no
Sound Server-3: PulseAudio v: 15.0 running: yes
Sound Server-4: PipeWire v: 0.3.47 running: yes
Network:
Device-1: Realtek RTL810xE PCI Express Fast Ethernet vendor: Toshiba
driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 5000
bus-ID: 02:00.0 chip-ID: 10ec:8136 class-ID: 0200
IF: enp2s0 state: down mac: <filter>
Device-2: Realtek RTL8191SEvB Wireless LAN driver: rtl8192se v: kernel
pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 03:00.0
chip-ID: 10ec:8172 class-ID: 0280
IF: wlp3s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Message: No bluetooth data found.
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 1.27 TiB used: 156.46 GiB (12.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Toshiba model: MK4055GSX
size: 372.61 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
type: N/A serial: <filter> rev: 1M scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST1000NM0033-9ZM173
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 1.5 Gb/s
type: HDD rpm: 7200 serial: <filter> rev: SN04 scheme: MBR
Optical-1: /dev/sr0 vendor: TSSTcorp model: CDDVDW TS-L633Y rev: TF01
dev-links: cdrom
Features: speed: 24 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
ID-1: / raw-size: 926.2 GiB size: 910.67 GiB (98.32%)
used: 156.43 GiB (17.2%) fs: ext4 dev: /dev/sdb1 maj-min: 8:17 label: N/A
uuid: 920f72cd-bba8-4638-bd56-2c95fa695fdc
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 5.31 GiB used: 25.5 MiB (0.5%)
priority: -2 dev: /dev/sdb2 maj-min: 8:18 label: N/A
uuid: 29279fc2-08a7-4ece-a1ee-c14a14c56eda
Unmounted:
ID-1: /dev/sda1 maj-min: 8:1 size: 1.46 GiB fs: ntfs label: System
uuid: 9E4234CD4234ABC1
ID-2: /dev/sda2 maj-min: 8:2 size: 360.47 GiB fs: ntfs label: TI102782W0E
uuid: F2F05B87F05B50C9
ID-3: /dev/sda3 maj-min: 8:3 size: 10.68 GiB fs: ntfs label: HDDRECOVERY
uuid: 3E3282B932827625
USB:
Hub-1: 1-0:1 info: Full speed or root hub ports: 4 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-2:2 info: Chicony USB2.0 UVC WebCam type: Video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
chip-ID: 04f2:b128 class-ID: 0e02
Hub-2: 2-0:1 info: Full speed or root hub ports: 8 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-3: 3-0:1 info: Full speed or root hub ports: 2 rev: 1.1
speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900
Hub-4: 4-0:1 info: Full speed or root hub ports: 2 rev: 1.1
speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900
Hub-5: 5-0:1 info: Full speed or root hub ports: 2 rev: 1.1
speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900
Hub-6: 6-0:1 info: Full speed or root hub ports: 2 rev: 1.1
speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900
Device-1: 6-1:2 info: Logitech V220 Cordless Optical Mouse for Notebooks
type: Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 2 rev: 1.1
speed: 1.5 Mb/s power: 98mA chip-ID: 046d:c51b class-ID: 0300
Hub-7: 7-0:1 info: Full speed or root hub ports: 2 rev: 1.1
speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900
Hub-8: 8-0:1 info: Full speed or root hub ports: 2 rev: 1.1
speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900
Sensors:
System Temperatures: cpu: 50.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 202 Uptime: 30m wakeups: 3 Init: systemd v: 250 tool: systemctl
Compilers: gcc: 11.2.0 alt: 10 clang: 13.0.1 Packages: 1626 pacman: 1606
lib: 462 flatpak: 10 snap: 10 Shell: Bash v: 5.1.16 running-in: konsole
inxi: 3.3.13
`
I have researched what to do in this forum and online and I am still not sure how to proceed. Thanks for help with what I should do.
Edit1: can I or the mods move this post to the AUR section please? I just noticed I have this post in the wrong section. Thanks.
