Hello,
I am on the stable branch.
Since updating to Cinnamon 5, the desktop environment crashes when trying to open applications that start in full screen (e.g. games - I have tested multiple different ones). The mouse cursor starts to twitch and the Taskbar, Alt+Tab, Menu etc. become unresponsive. Depending on the application, it either crashes or freezes. If it freezes, the only way I have found to close it is switching to TTY and killing the process. In either case, I get a message dialogue that informs me that I am in fallback mode and prompts me to restart Cinnamon after the application is closed. Cinnamon continues to work normally after restarting it using that dialogue.
Opening applications in windowed mode and then switching to full screen works in most cases. Starting them in full screen mode in a different DE also works without any problems.
When starting the applications using the terminal, I get the following error message:
Error Message
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 40 (X_TranslateCoords)
Resource id in failed request: 0x340062f
Serial number of failed request: 3424
Current serial number in output stream: 3424
The values of the serial numbers and resource id vary, the rest does not
My Cinnamon version is 5.0.4, I am using Kernel 5.13.1-3-Manjaro and Nvidia driver version 470.42.01, but I also had these errors occur on Kernel 5.10 and using Nvidia driver version 465.xx
inxi Output
System:
Kernel: 5.13.1-3-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.13-x86_64
root=UUID=18fac743-1dab-49a3-b2d7-732afbc6f77b rw quiet loglevel=0 splash
apparmor=1 security=apparmor udev.log_priority=3
Desktop: Cinnamon 5.0.4 tk: GTK 3.24.30 vt: 7 dm: LightDM 1.30.0
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop Mobo: Micro-Star model: MPG B550 GAMING EDGE WIFI (MS-7C91)
v: 1.0 serial: <filter> UEFI: American Megatrends v: 1.30 date: 08/31/2020
Battery:
Message: No system battery data found. Is one present?
Memory:
RAM: total: 31.28 GiB used: 2.66 GiB (8.5%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: 8-Core model: AMD Ryzen 7 3700X bits: 64 type: MT MCP arch: Zen 2
family: 17 (23) model-id: 71 (113) stepping: 0 microcode: 8701021 cache:
L2: 4 MiB bogomips: 115253
Speed: 3598 MHz min/max: 2200/3600 MHz boost: enabled Core speeds (MHz):
1: 3598 2: 2054 3: 2057 4: 2054 5: 2056 6: 3600 7: 2057 8: 2057 9: 2056
10: 2054 11: 2059 12: 3594 13: 2057 14: 2056 15: 3601 16: 2054
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc
cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid
fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibs irperf lahf_lm lbrv lm
mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc
nopl npt nrip_save nx osvw overflow_recov pae pat pausefilter pclmulqdq
pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni popcnt pse
pse36 rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sev sev_es sha_ni
skinit smap smca sme smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp
succor svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl
v_vmsave_vmload vgif vmcb_clean vme vmmcall wbnoinvd wdt xgetbv1 xsave
xsavec xsaveerptr xsaveopt xsaves
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, STIBP:
conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GA104 [GeForce RTX 3070] vendor: ZOTAC driver: nvidia
v: 470.42.01 alternate: nouveau,nvidia_drm bus-ID: 2b:00.0
chip-ID: 10de:2484 class-ID: 0300
Display: x11 server: X.Org 1.20.11 driver: loaded: nvidia display-ID: :0
screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.7x15.0")
s-diag: 777mm (30.6")
Monitor-1: DP-0 res: 2560x1440 hz: 60 dpi: 109 size: 597x336mm (23.5x13.2")
diag: 685mm (27")
OpenGL: renderer: NVIDIA GeForce RTX 3070/PCIe/SSE2
v: 4.6.0 NVIDIA 470.42.01 direct render: Yes
Audio:
Device-1: NVIDIA GA104 High Definition Audio vendor: ZOTAC
driver: snd_hda_intel v: kernel bus-ID: 2b:00.1 chip-ID: 10de:228b
class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel bus-ID: 2d:00.4 chip-ID: 1022:1487
class-ID: 0403
Device-3: C-Media Anua Mic CM 900 type: USB
driver: hid-generic,snd-usb-audio,usbhid bus-ID: 1-5:3 chip-ID: 0d8c:0134
class-ID: 0300
Sound Server-1: ALSA v: k5.13.1-3-MANJARO running: yes
Sound Server-2: JACK v: 0.125.0 running: no
Sound Server-3: PulseAudio v: 14.2 running: yes
Sound Server-4: PipeWire v: 0.3.31 running: yes
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel bus-ID: 29:00.0
chip-ID: 8086:2723 class-ID: 0280
IF: wlo1 state: down mac: <filter>
Device-2: Realtek RTL8125 2.5GbE vendor: Micro-Star MSI driver: r8169
v: kernel port: f000 bus-ID: 2a:00.0 chip-ID: 10ec:8125 class-ID: 0200
IF: enp42s0 state: up speed: 100 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-9:5
chip-ID: 8087:0029 class-ID: e001
Report: bt-adapter ID: hci0 rfk-id: 1 state: down
bt-service: enabled,running rfk-block: hardware: no software: yes
address: <filter>
Logical:
Permissions: Unable to run lvs. Root privileges required.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 1.82 TiB used: 546.77 GiB (29.3%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital
model: WDS200T3X0C-00SJG0 size: 1.82 TiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 rotation: SSD serial: <filter>
rev: 102430WD scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 1.27 TiB size: 1.25 TiB (98.35%) used: 546.77 GiB (42.6%)
fs: ext4 dev: /dev/nvme0n1p5 maj-min: 259:5 label: N/A
uuid: 18fac743-1dab-49a3-b2d7-732afbc6f77b
ID-2: /boot/efi raw-size: 100 MiB size: 98.4 MiB (98.45%)
used: 301 KiB (0.3%) fs: vfat dev: /dev/nvme0n1p6 maj-min: 259:6 label: N/A
uuid: A450-5576
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 100 MiB fs: <superuser required>
label: N/A uuid: 186A-6DE1
ID-2: /dev/nvme0n1p2 maj-min: 259:2 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-3: /dev/nvme0n1p3 maj-min: 259:3 size: 558.18 GiB
fs: <superuser required> label: N/A uuid: 7A607ADD607AA015
ID-4: /dev/nvme0n1p4 maj-min: 259:4 size: 515 MiB fs: <superuser required>
label: N/A uuid: D6FEE641FEE61A0F
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 10 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-2:2 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
power: 100mA chip-ID: 05e3:0608 class-ID: 0900
Device-1: 1-5:3 info: C-Media Anua Mic CM 900 type: Audio,HID
driver: hid-generic,snd-usb-audio,usbhid interfaces: 3 rev: 1.1
speed: 12 Mb/s power: 100mA chip-ID: 0d8c:0134 class-ID: 0300
Device-2: 1-8:4 info: Micro Star MYSTIC LIGHT type: HID
driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s
power: 500mA chip-ID: 1462:7c91 class-ID: 0300 serial: <filter>
Device-3: 1-9:5 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029
class-ID: e001
Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-4: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-1:2 info: Logitech G513 RGB MECHANICAL GAMING KEYBOARD
type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0
speed: 12 Mb/s power: 500mA chip-ID: 046d:c33c class-ID: 0300
serial: <filter>
Device-2: 3-3:3 info: Corsair CORSAIR GLAIVE RGB PRO Gaming Mouse
type: Mouse,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0
speed: 12 Mb/s power: 500mA chip-ID: 1b1c:1b74 class-ID: 0300
serial: <filter>
Hub-5: 3-4:4 info: Genesys Logic Hub ports: 4 rev: 2.1 speed: 480 Mb/s
chip-ID: 05e3:0610 class-ID: 0900
Hub-6: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-7: 4-4:2 info: Genesys Logic USB3.1 Hub ports: 4 rev: 3.2 speed: 5 Gb/s
chip-ID: 05e3:0620 class-ID: 0900
Sensors:
System Temperatures: cpu: 52.0 C mobo: N/A gpu: nvidia temp: 54 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 0%
Info:
Processes: 352 Uptime: 4h 19m wakeups: 0 Init: systemd v: 248
tool: systemctl Compilers: gcc: 11.1.0 alt: 10 clang: 12.0.1 Packages: 1520
pacman: 1507 lib: 471 flatpak: 10 snap: 3 Shell: Bash v: 5.1.8
running-in: gnome-terminal inxi: 3.3.05
Thanks in advance for your help!