I have a pair of headphones connected to my front out via 3.5mm and my 5.1 connected to the rear out via 3.5mm. While the headphones are disconnected, the 5.1 works via the “Line Out” option, but as soon as the headphones are plugged in, the 5.1 starts generating a static noise. And, if the audio is set to “Line Out” between “Headphones” and “Line Out” then nothing is audible through the 5.1. In Windows, Realtek Audio Console shows an option of seperating these devices, or combining them. If they’re combined, you can play the same audio back on both the line out and the headphone out, and if they’re seperate, you can use either, with both of the devices connected via 3.5mm. Please help. I don’t want wear on my headphone jack/cable because I’m using fairly good headphones and I want them, and the system too, to last as long as possible. I’m regularly switching between the headphones and the system, so unplugging and plugging in the headphones isn’t a permanent solution.
System:
Kernel: 5.10.60-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64
root=UUID=ea140b11-0f4a-401b-b0f5-7ee5983c3a59 rw quiet splash apparmor=1
security=apparmor resume=UUID=415c3c19-eede-4920-8715-d6bb5903a297
udev.log_priority=3
Desktop: GNOME 40.4 tk: GTK 3.24.30 wm: gnome-shell dm: GDM 40.1
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop Mobo: ASUSTeK model: TUF B450-PLUS GAMING v: Rev X.0x
serial: <filter> UEFI: American Megatrends v: 3202 date: 06/16/2021
Battery:
Message: No system battery data found. Is one present?
Memory:
RAM: total: 5.77 GiB used: 2.89 GiB (50.0%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: Quad Core model: AMD Ryzen 3 2200G with Radeon Vega Graphics bits: 64
type: MCP arch: Zen family: 17 (23) model-id: 11 (17) stepping: 0
microcode: 8101016 cache: L2: 2 MiB bogomips: 29614
Speed: 3686 MHz min/max: 1600/3700 MHz boost: disabled Core speeds (MHz):
1: 3686 2: 3686 3: 3655 4: 3555
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext clflush clflushopt clzero cmov cmp_legacy constant_tsc cpb cpuid
cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid
fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb irperf lahf_lm lbrv lm mca
mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl
npt nrip_save nx osvw overflow_recov pae pat pausefilter pclmulqdq pdpe1gb
perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni popcnt pse pse36
rdrand rdseed rdtscp rep_good sep sev sev_es sha_ni skinit smap smca sme
smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 succor svm svm_lock syscall tce
topoext tsc tsc_scale v_vmsave_vmload vgif vmcb_clean vme vmmcall wdt
xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, STIBP:
disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series]
vendor: ASUSTeK PRIME driver: amdgpu v: kernel bus-ID: 08:00.0
chip-ID: 1002:15dd class-ID: 0300
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 1-1:2 chip-ID: 046d:0825 class-ID: 0102 serial: <filter>
Display: wayland server: X.org 1.20.13 compositor: gnome-shell driver:
loaded: amdgpu note: n/a (using device driver) - try sudo/root display-ID: 0
resolution: <missing: xdpyinfo>
OpenGL: renderer: AMD Radeon Vega 8 Graphics (RAVEN DRM 3.40.0
5.10.60-1-MANJARO LLVM 12.0.1)
v: 4.6 Mesa 21.2.1 direct render: Yes
Audio:
Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio
vendor: ASUSTeK PRIME B450M-A driver: snd_hda_intel v: kernel
bus-ID: 08:00.1 chip-ID: 1002:15de class-ID: 0403
Device-2: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel bus-ID: 08:00.6 chip-ID: 1022:15e3 class-ID: 0403
Device-3: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 1-1:2 chip-ID: 046d:0825 class-ID: 0102 serial: <filter>
Sound Server-1: ALSA v: k5.10.60-1-MANJARO running: yes
Sound Server-2: sndio v: N/A running: no
Sound Server-3: JACK v: 1.9.19 running: no
Sound Server-4: PulseAudio v: 15.0 running: yes
Sound Server-5: PipeWire v: 0.3.33 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK PRIME B450M-A driver: r8169 v: kernel port: f000
bus-ID: 03:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
Device-2: TP-Link 802.11ac WLAN Adapter type: USB driver: rtl88XXau
bus-ID: 1-2:3 chip-ID: 2357:011f class-ID: 0000 serial: <filter>
IF: wlp1s0f0u2 state: down mac: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB
driver: btusb v: 0.8 bus-ID: 1-3:4 chip-ID: 0a12:0001 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 1.14 TiB used: 776.76 GiB (66.4%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Intel model: SSDSC2KW256G8
size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
type: SSD serial: <filter> rev: 004C scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Toshiba model: MQ04ABF100
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
type: HDD rpm: 5400 serial: <filter> rev: 0A scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 93.13 GiB size: 90.67 GiB (97.35%) used: 22.61 GiB (24.9%)
fs: ext4 dev: /dev/sda2 maj-min: 8:2 label: N/A
uuid: ea140b11-0f4a-401b-b0f5-7ee5983c3a59
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 25.5 MiB (8.5%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: NO_LABEL
uuid: 4D8D-221A
ID-3: /mnt/AcerHDD raw-size: 831.5 GiB size: 831.5 GiB (100.00%)
used: 742.74 GiB (89.3%) fs: ntfs dev: /dev/sdb2 maj-min: 8:18
label: AcerHDD uuid: 8AA20B1EA20B0E7F
ID-4: /mnt/SSD raw-size: 136.24 GiB size: 136.24 GiB (100.00%)
used: 11.39 GiB (8.4%) fs: ntfs dev: /dev/sda4 maj-min: 8:4 label: SSD
uuid: 51BFBB3A638BA693
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 8.8 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/sda3 maj-min: 8:3 label: N/A
uuid: 415c3c19-eede-4920-8715-d6bb5903a297
Unmounted:
ID-1: /dev/sdb1 maj-min: 8:17 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-2: /dev/sdb3 maj-min: 8:19 size: 100 GiB fs: ntfs label: N/A
uuid: 8A6AD8276AD81235
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 10 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-1:2 info: Logitech Webcam C270 type: Video,Audio
driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s
power: 500mA chip-ID: 046d:0825 class-ID: 0102 serial: <filter>
Device-2: 1-2:3 info: TP-Link 802.11ac WLAN Adapter type: Network
driver: rtl88XXau interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA
chip-ID: 2357:011f class-ID: 0000 serial: <filter>
Device-3: 1-3:4 info: Cambridge Silicon Radio Bluetooth Dongle (HCI mode)
type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s
chip-ID: 0a12:0001 class-ID: e001
Device-4: 1-7:7 info: Microsoft Xbox360 Controller type: <vendor specific>
driver: xpad interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 500mA
chip-ID: 045e:028e class-ID: ff00
Device-5: 1-10:6 info: Logitech G203 LIGHTSYNC Gaming Mouse type: Mouse,HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s
power: 300mA chip-ID: 046d:c092 class-ID: 0300 serial: <filter>
Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-4:2 info: China Resource Semico USB Keyboard
type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1
speed: 1.5 Mb/s power: 500mA chip-ID: 1a2c:4d7e class-ID: 0301
Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-5: 5-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-6: 6-0:1 info: Full speed (or root) Hub ports: 1 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 53.9 C mobo: N/A gpu: amdgpu temp: 53.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 260 Uptime: 6m wakeups: 0 Init: systemd v: 248 tool: systemctl
Compilers: gcc: 11.1.0 Packages: 1240 pacman: 1232 lib: 309 flatpak: 8
Shell: Zsh v: 5.8 running-in: gnome-terminal inxi: 3.3.06
or 
if you agree)
