Hello all,
I’ve looked around the forum and wider Internet but I am still stuck, so wondering if someone here can help.
I’m trying to transfer files between my computer to a micro SD to go into a Samsung Galaxy A7 Lite.
I first tried to put the files in the SD card and then insert the SD card into the tablet.
The files went okay in the SD card but never appeared on the tablet. In fact when I put the SD card back into the computer, the files had disappeared.
So I left the SD card in the tablet and plugged it into the computer.
On the tablet, I enabled developer mode, allowed file transfer as the defaults for USB connection, and enabled the debugging mode.
The tablet get recognised by the computer.
ty04: USB 00.3: 0000 Unclassified device
SysFS ID: /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.3
SysFS BusID: 1-1.2:1.3
Hardware Class: unknown
Model: "Samsung Electronics Galaxy A5 (MTP)"
Hotplug: USB
Vendor: usb 0x04e8 "Samsung Electronics Co., Ltd"
Device: usb 0x6860 "Galaxy A5 (MTP)"
Revision: "4.04"
Serial ID: "R9JRC029KGR"
Speed: 480 Mbps
Module Alias: "usb:v04E8p6860d0404dc00dsc00dp00icFFisc42ip01in03"
Attached to: #22 (Hub)
05: USB 00.1: 10200 Modem
SysFS ID: /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1
SysFS BusID: 1-1.2:1.1
Hardware Class: modem
Model: "Samsung Electronics Galaxy A5 (MTP)"
Hotplug: USB
Vendor: usb 0x04e8 "Samsung Electronics Co., Ltd"
Device: usb 0x6860 "Galaxy A5 (MTP)"
Revision: "4.04"
Serial ID: "R9JRC029KGR"
Driver: "cdc_acm"
Driver Modules: "cdc_acm"
Device File: /dev/ttyACM0
Device Files: /dev/ttyACM0, /dev/serial/by-id/usb-SAMSUNG_SAMSUNG_Android_R9JRC029KGR-if01, /dev/serial/by-path/pci-0000:00:14.0-usb-0:1.2:1.1
Speed: 480 Mbps
Module Alias: "usb:v04E8p6860d0404dc00dsc00dp00ic02isc02ip01in01"
Driver Info #0:
Driver Status: cdc_acm is active
Driver Activation Cmd: "modprobe cdc_acm"
Attached to: #22 (Hub)
But when I try to open the tablet folder, I get this error message:
The file or folder udi=/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2 does not exist.
How do I manage to access files/transfer files into the tablet?
I am a complete newbie to Manjaro, so assume stupid when answering.
Let me know if you need more info. I’m happy to provide it