Can't run UVRizom AppImage: OpenGL Fatal Error

denielt · 11 May 2023 22:35

Hello everyone! I’m trying to run UVRizom AppImage on Manjaro, but getting an error related to OpenGL when trying to run the application. Any help is appreciated. Please consider that I have little knowledge about linux; I tried to install mesa-utils cause I saw in the internet people saying this could be related, but no success.

pacman -Ss mesa utils                                                                          ✔ 
extra/mesa-utils 9.0.0-2 [installed]
    Essential Mesa utilities
multilib/lib32-mesa-utils 8.5.0-1 [installed]
    Essential Mesa utilities (32-bit)

I also tried to follow all the instructions related to the Linux Installation of RizomUV, but still no success.

First of all, I gave all the necessary permissons for the appimage to be executed using the command sudo chmod u+x RizomUV.2022.1.57.gfabcfb8.master.2022-09-29.AppImage

When I try to right click and run the application a dialog appear with the message: “OpenGL Fatal Error. No OpenGL attribs available.” If I click OK, this dialog box appear:

This is what terminal shows if I try to run the appimage through the terminal:


'/home/denielton/Downloads/RizomUV/RizomUV.2022.1.57.gfabcfb8.master.2022-09-29.AppImage'
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: Unrecognized accel key 'OPTIMIZE_PAINT', accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
23:15:26: Debug: No accel key found, accel string ignored.
/usr/lib/gvfs/libgvfscommon.so: undefined symbol: g_task_set_static_name
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so
Gtk-Message: Failed to load module "canberra-gtk-module"

(rizomuv:67036): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/x86_64-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory

This likely means that your installation is broken.
Try running the command
  gdk-pixbuf-query-loaders > /usr/lib/x86_64-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache
to make things work again for the time being.
Fontconfig warning: line 5: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/10-hinting-slight.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/10-sub-pixel-rgb.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/10-yes-antialias.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/11-lcdfilter-default.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/20-unhint-small-vera.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/30-metric-aliases.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/40-nonlatin.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/45-generic.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/45-latin.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/48-spacing.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/49-sansserif.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/51-local.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/60-generic.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/60-latin.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/65-nonlatin.conf", line 4: unknown element "description"
23:15:26: Debug: "Right" must use modifiers to be used as a keyboard accelerator with GTK
23:15:26: Debug: "Left" must use modifiers to be used as a keyboard accelerator with GTK
23:15:26: Debug: "Up" must use modifiers to be used as a keyboard accelerator with GTK
23:15:26: Debug: "Down" must use modifiers to be used as a keyboard accelerator with GTK
../src/unix/glx11.cpp(626): assert ""Assert failure"" failed in InitVisual(): Failed to get a XVisualInfo for the requested attributes.

** (rizomuv:67036): WARNING **: atk-bridge: get_device_events_reply: unknown signature
../src/unix/glx11.cpp(626): assert ""Assert failure"" failed in InitVisual(): Failed to get a XVisualInfo for the requested attributes.
zsh: trace trap (core dumped)

Tried to run using sudo:

/usr/lib/gvfs/libgvfscommon.so: undefined symbol: g_task_set_static_name
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so
Gtk-Message: Failed to load module "canberra-gtk-module"
Fontconfig warning: line 5: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/10-hinting-slight.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/10-sub-pixel-rgb.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/10-yes-antialias.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/11-lcdfilter-default.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/20-unhint-small-vera.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/30-metric-aliases.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/40-nonlatin.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/45-generic.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/45-latin.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/48-spacing.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/49-sansserif.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/51-local.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/60-generic.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/60-latin.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/65-nonlatin.conf", line 4: unknown element "description"
/usr/lib/gvfs/libgvfscommon.so: undefined symbol: g_task_set_static_name
Failed to load module: /usr/lib/gio/modules/libgioremote-volume-monitor.so
/usr/lib/gvfs/libgvfscommon.so: undefined symbol: g_task_set_static_name
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so
/usr/lib/gvfs/libgvfscommon.so: undefined symbol: g_task_set_static_name
Failed to load module: /usr/lib/gio/modules/libgioremote-volume-monitor.so

(rizomuv:68238): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/x86_64-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory

This likely means that your installation is broken.
Try running the command
  gdk-pixbuf-query-loaders > /usr/lib/x86_64-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache
to make things work again for the time being.

(rizomuv:68238): GLib-GIO-ERROR **: No GSettings schemas are installed on the system
zsh: trace trap  sudo

inxi -Fxz

inxi -Fxz                                                                                      ✔ 
System:
  Kernel: 6.1.26-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
    Desktop: GNOME v: 43.5 Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: ASUSTeK model: PRIME B450M-GAMING/BR v: Rev X.0x
    serial: <superuser required> UEFI: American Megatrends v: 2006
    date: 11/13/2019
CPU:
  Info: 6-core model: AMD Ryzen 5 2600 bits: 64 type: MT MCP arch: Zen+ rev: 2
    cache: L1: 576 KiB L2: 3 MiB L3: 16 MiB
  Speed (MHz): avg: 2442 high: 3792 min/max: 1550/3400 boost: enabled cores:
    1: 3774 2: 1516 3: 1517 4: 2528 5: 1517 6: 3790 7: 3792 8: 1517 9: 1517
    10: 2527 11: 1517 12: 3792 bogomips: 81469
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
  Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
    vendor: XFX Pine driver: amdgpu v: kernel arch: GCN-4 bus-ID: 08:00.0
    temp: 51.0 C
  Display: x11 server: X.org v: 1.21.1.8 with: Xwayland v: 23.1.1 driver: X:
    loaded: amdgpu unloaded: modesetting,radeon dri: radeonsi gpu: amdgpu
    resolution: 1920x1080~74Hz
  API: OpenGL v: 4.6 Mesa 23.0.3 renderer: AMD Radeon RX 570 Series
    (polaris10 LLVM 15.0.7 DRM 3.49 6.1.26-1-MANJARO) direct-render: Yes
Audio:
  Device-1: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
    vendor: XFX Pine driver: snd_hda_intel v: kernel bus-ID: 08:00.1
  Device-2: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel
    v: kernel bus-ID: 0a:00.3
  Device-3: FIFINE Microphones K670 Microphone
    driver: hid-generic,snd-usb-audio,usbhid type: USB bus-ID: 3-3:2
  API: ALSA v: k6.1.26-1-MANJARO status: kernel-api
  Server-1: JACK v: 1.9.22 status: off
  Server-2: PipeWire v: 0.3.70 status: active
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: ASUSTeK PRIME B450M-A driver: r8169 v: kernel port: f000
    bus-ID: 07:00.0
  IF: enp7s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 447.13 GiB used: 207.31 GiB (46.4%)
  ID-1: /dev/sda vendor: Kingston model: SA400S37480G size: 447.13 GiB
Partition:
  ID-1: / size: 438.75 GiB used: 207.31 GiB (47.3%) fs: ext4 dev: /dev/sda2
  ID-2: /boot/efi size: 299.4 MiB used: 312 KiB (0.1%) fs: vfat
    dev: /dev/sda1
Swap:
  ID-1: swap-1 type: file size: 16.29 GiB used: 0 KiB (0.0%) file: /swapfile1
Sensors:
  System Temperatures: cpu: 53.6 C mobo: N/A gpu: amdgpu temp: 51.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 1098
Info:
  Processes: 340 Uptime: 5h 44m Memory: available: 15.55 GiB
  used: 5.27 GiB (33.9%) Init: systemd Compilers: gcc: 12.2.1 clang: 15.0.7
  Packages: 1313 Shell: Zsh v: 5.9 inxi: 3.3.27

Any help is appreciated.

bogdancovaciu · 12 May 2023 05:44

Hello,

They do not instruct to grant only the owner (you, the user) of that file execution permissions. They instruct to run sudo chmod +x on that file.

That is related to gvfs - is it installed, is your system updated and rebooted?

The libcanberra should not get into popping up errors like that as if we are 8 years ago …

Please stop doing that with any UI application! All applications that require administrative rights to run will have a polkit.

If you do that, I’m sure you will get an error as it doesn’t exist. Arch Linux and hence Manjaro has the gdk-pixbuf2 install without the x86_64-linux-gnu in the path … hence is /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders.cache

But, since is a subscription based software, end even the trial requires registering, i suggest you contact their support for any issue you have with it.

denielt · 12 May 2023 20:56

Thanks for your answer.

Tried to use sudo chmod +x RizomUV.AppImage but the problem persist.

Yes, it’s installed and the system is updated.

pacman -Ss gvfs                                                                                ✔ 
extra/gvfs 1.50.4-1 (gnome) [installed]
    Virtual filesystem implementation for GIO
extra/gvfs-afc 1.50.4-1 (gnome)
    Virtual filesystem implementation for GIO (AFC backend; Apple mobile devices)
extra/gvfs-goa 1.50.4-1 (gnome)
    Virtual filesystem implementation for GIO (Gnome Online Accounts backend; cloud storage)
extra/gvfs-google 1.50.4-1 (gnome)
    Virtual filesystem implementation for GIO (Google Drive backend)
extra/gvfs-gphoto2 1.50.4-1 (gnome)
    Virtual filesystem implementation for GIO (gphoto2 backend; PTP camera, MTP media player)
extra/gvfs-mtp 1.50.4-1 (gnome)
    Virtual filesystem implementation for GIO (MTP backend; Android, media player)
extra/gvfs-nfs 1.50.4-1 (gnome)
    Virtual filesystem implementation for GIO (NFS backend)
extra/gvfs-smb 1.50.4-1 (gnome)
    Virtual filesystem implementation for GIO (SMB/CIFS backend; Windows client)

Should I install more than one of these packages?

bogdancovaciu · 13 May 2023 04:00

On the same file? It doesn’t change your previous chmod u. Download the file again or see File permissions and attributes - ArchWiki

Only if you need them based of their description usage. For this particular case, only the gvfs is needed.
Did you get a reply from their technical support team?

denielt · 13 May 2023 18:01

Tried to use chmod +x with a different file, and also using previous version of RizomUV to see if I could get a different result but the problem persists in all versions. It’s really strange cause I tried to run the application in a live system of ubuntu and fedora and it just worked without any minor tweak, I really have no idea what’s wrong.

Here’s the output in terminal using fedora:

[pinguim@fedora Downloads]$ ./RizomUV.2022.1.57.gfabcfb8.master.2022-09-29.AppImage 
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: Unrecognized accel key 'OPTIMIZE_PAINT', accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: Unrecognized accel key 'OPTIMIZE_PAINT', accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: Unrecognized accel key 'OPTIMIZE_PAINT', accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: Unrecognized accel key 'OPTIMIZE_PAINT', accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: Unrecognized accel key 'OPTIMIZE_PAINT', accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: Unrecognized accel key 'OPTIMIZE_PAINT', accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: Unrecognized accel key 'OPTIMIZE_PAINT', accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: Unrecognized accel key 'OPTIMIZE_PAINT', accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: Unrecognized accel key 'OPTIMIZE_PAINT', accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: Unrecognized accel key 'OPTIMIZE_PAINT', accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
22:18:20: Debug: No accel key found, accel string ignored.
Gtk-Message: Failed to load module "canberra-gtk-module"
Gtk-Message: Failed to load module "pk-gtk-module"
Fontconfig warning: line 5: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/10-hinting-slight.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/10-sub-pixel-rgb-for-kde.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/10-yes-antialias.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/11-lcdfilter-default.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/20-unhint-small-vera.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/25-unhint-nonlatin.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/30-metric-aliases.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/40-nonlatin.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/45-generic.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/45-latin.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/48-spacing.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/49-sansserif.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/51-local.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/60-generic.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/60-latin.conf", line 4: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/65-nonlatin.conf", line 4: unknown element "description"
[pinguim@fedora Downloads]$

Not yet, I’ll update here as soon as they reply!

If I try to run the previous version of the appimage, from 2019 I got this error:

rizomuv: symbol lookup error: /usr/lib/libgio-2.0.so.0: undefined symbol: g_module_open_full

When looking for this error some solutions on the internet instructed to delete the file libgmodule-2.0.so after extract the appimage but it didn’t solve the problem for me.