Hello together,
this is the first time I write in a technical board, but for course I’ve read a lot, so I’ll try to write a good request. I had 2 days of trying to fix it, but I’ll try to do a good conclusion:
What caused the start situation?
I’m using a dualboot system (manjaro plasma + win10) since years and I’ve set this up multiple times. Some days ago I managed to completely fill the root-partition of manjaro and it became unbootable. Then out of laziness, impulsiveness and lack of thinking, I decided to take some space of the windows 10 partition (knowing it will probably break by doing this) and to put it to the root partition of manjaro. To keep it short: that didn’t work out and at some point I used a Live-USB and deleted everything on my drive (win10+manjaro) and started to build it up from zero.
When did the problem occure?
I started to set up manjaro first and began the partitioning. Did it often at this problem, but always like this:
- Bootloader: Space: 1000MB; Format: fat32; Mount: /boot/efi; Flag: boot
- Swap: Space: 17000MB; Format: swap; Flag: linuxswap
- Root: Space: 70000MB; Format ext4; Mount: /; Flag: root
- Home: Space(rest): ~90000MB; Format ext4; Mount: /home;
Should look more or less like this:
The rest of the drive (ca. 300GB) were unallocated for windows.
But the process failed and dozent of times I tried installation always ended like this:
What I tried (mind protocol):
- I made sure, that Fast boot and secure boot are disabled
- I made sure, the partition-table is GPT
- I tried to solve it by messing with efivars (was a bit over my skill level)
- I selected default variables for UEFI (and ofc disabled Fast boot and Secure boot)
- I updated UEFI with the same Version, made it wipe some stuff, I guess
In between I installed Windows10 on the unallocated space (just as info) - By taking a look into the live-usb bootloader, I saw that I created multiple .efi files. I deleted all not windows belonging ones and tried again (successfully creating a new one with failed installation)
- Of course I searched the final installation outputs (log info) in the web
- I tried another distro for the live-usb (xfce)
Those are the most important tries I think. I searched this and other forums and read a lot of entries, but sadly without success.
When I retried installation, I always deleted the partitions of the last installation in GParted (trying to have fresh starts). That looked like this before installation:
Additionally here is the collected system information (hope it’s well readable like this):
[manjaro@manjaro ~]$ inxi -v8azy
System:
Kernel: 6.6.10-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC
misobasedir=manjaro misolabel=MANJARO_XFCE_2313 quiet
systemd.show_status=1 splash apparmor=1 security=apparmor driver=free
nouveau.modeset=1 i915.modeset=1 radeon.modeset=1
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm
v: 4.18.0 vt: 7 dm: LightDM v: 1.32.0 Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: Micro-Star product: GP72 2QE v: REV:1.0
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: Micro-Star model: MS-1793 v: REV:0.B serial: <superuser required>
UEFI: American Megatrends v: E1793IMS.10F date: 01/12/2016
Battery:
ID-1: BAT1 charge: 30.3 Wh (97.4%) condition: 31.1/42.4 Wh (73.4%)
volts: 12.2 min: 10.8 model: MSI BIF0_9 type: Li-ion serial: N/A
status: not charging
Device-1: hidpp_battery_0 model: Logitech M705 serial: <filter> charge: 90%
rechargeable: yes status: discharging
Memory:
System RAM: total: 16 GiB available: 15.54 GiB used: 1.39 GiB (9.0%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Core i7-5700HQ bits: 64 type: MT MCP arch: Broadwell
gen: core 5 level: v3 note: check built: 2015-18 process: Intel 14nm
family: 6 model-id: 0x47 (71) stepping: 1 microcode: 0x22
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
L3: 6 MiB desc: 1x6 MiB
Speed (MHz): avg: 1387 high: 3500 min/max: 800/3500 scaling:
driver: intel_cpufreq governor: schedutil cores: 1: 800 2: 800 3: 800 4: 1800
5: 3500 6: 1800 7: 800 8: 800 bogomips: 43114
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon
avx avx2 bmi1 bmi2 bts clflush cmov constant_tsc cpuid cpuid_fault cx16
cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c flexpriority
flush_l1d fma fpu fsgsbase fxsr ht ibpb ibrs ida intel_pt invpcid lahf_lm
lm mca mce md_clear mmx monitor movbe msr mtrr nonstop_tsc nopl nx pae pat
pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts
rdrand rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1
sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
tsc_deadline_timer vme vmx vnmi vpid x2apic xsave xsaveopt xtopology xtpr
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: conditional, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel HD Graphics 5600 vendor: Micro-Star MSI driver: i915
v: kernel arch: Gen-8 process: Intel 14nm built: 2014-15 ports: active: eDP-1
empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:1612
class-ID: 0300
Device-2: NVIDIA GM107M [GeForce GTX 950M] vendor: Micro-Star MSI
driver: nouveau v: kernel non-free: 545.xx+ status: current (as of 2023-11;
EOL~2026-12-xx) arch: Maxwell code: GMxxx process: TSMC 28nm
built: 2014-2019 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 link-max: gen: 3
speed: 8 GT/s bus-ID: 01:00.0 chip-ID: 10de:139a class-ID: 0302
temp: 41.0 C
Device-3: Bison MSI Integrated Webcam driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 2-1.4:5 chip-ID: 5986:014c
class-ID: 0e02
Display: x11 server: X.org v: 1.21.1.10 compositor: xfwm v: 4.18.0 driver:
X: loaded: modesetting alternate: fbdev,vesa dri: iris,nouveau gpu: i915
display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-size: <missing: xdpyinfo>
Monitor-1: eDP-1 model: ChiMei InnoLux 0x1735 built: 2014 res: 1920x1080
hz: 60 dpi: 128 gamma: 1.2 chroma: red: x: 0.639 y: 0.333 green: x: 0.314
y: 0.616 blue: x: 0.153 y: 0.059 white: x: 0.314 y: 0.329
size: 382x215mm (15.04x8.46") diag: 438mm (17.3") ratio: 16:9
modes: 1920x1080
API: EGL v: 1.5 hw: drv: intel iris drv: nvidia nouveau platforms:
device: 0 drv: iris device: 1 drv: nouveau device: 2 drv: swrast surfaceless:
drv: iris x11: drv: iris inactive: gbm,wayland
API: OpenGL v: 4.6 compat-v: 4.3 vendor: intel mesa v: 23.3.3-manjaro1.1
glx-v: 1.4 direct-render: yes renderer: Mesa Intel HD Graphics 5600 (BDW GT2)
device-ID: 8086:1612 memory: 15.17 GiB unified: yes
Audio:
Device-1: Intel Broadwell-U Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel bus-ID: 00:03.0 chip-ID: 8086:160c
class-ID: 0403
Device-2: Intel 8 Series/C220 Series High Definition Audio
vendor: Micro-Star MSI 8 driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
chip-ID: 8086:8c20 class-ID: 0403
API: ALSA v: k6.6.10-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Wireless 3160 driver: iwlwifi v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 8086:08b3 class-ID: 0280
IF: wlp3s0 state: down mac: <filter>
Device-2: Qualcomm Atheros Killer E220x Gigabit Ethernet
vendor: Micro-Star MSI driver: alx v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: 3000 bus-ID: 04:00.0 chip-ID: 1969:e091 class-ID: 0200
IF: enp4s0 state: down mac: <filter>
WAN IP: No WAN IP found. Connected to web? SSL issues? Try enabling dig
Bluetooth:
Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB
rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 2-1.3:4 chip-ID: 8087:07dc
class-ID: e001
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 479.46 GiB used: 0 KiB (0.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Intenso model: SSD Sata III
size: 472 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 6K scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Intenso model: Alu Line size: 7.46 GiB
block-size: physical: 512 B logical: 512 B type: USB rev: 2.0 spd: 480 Mb/s
lanes: 1 mode: 2.0 tech: N/A serial: <filter> fw-rev: 8.07 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GUB0N rev: 1.00
dev-links: cdrom
Features: speed: 24 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
Message: No partition data found.
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/sda1 maj-min: 8:1 size: 100 MiB fs: vfat label: N/A
uuid: 4A0E-09ED
ID-2: /dev/sda2 maj-min: 8:2 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-3: /dev/sda3 maj-min: 8:3 size: 292.33 GiB fs: ntfs label: N/A
uuid: BC2E1BE82E1B9A8A
ID-4: /dev/sda4 maj-min: 8:4 size: 538 MiB fs: ntfs label: N/A
uuid: 54A8E849A8E82AE6
ID-5: /dev/sda5 maj-min: 8:5 size: 1000 MiB fs: vfat label: N/A
uuid: 5B8D-00FD
ID-6: /dev/sda6 maj-min: 8:6 size: 68.36 GiB fs: ext4 label: N/A
uuid: b1a63038-fdd5-433a-a729-7c4c363934ce
ID-7: /dev/sda7 maj-min: 8:7 size: 16.6 GiB fs: swap label: N/A
uuid: d0c4a646-3d6b-4ca7-affb-d299c6ac399c
ID-8: /dev/sda8 maj-min: 8:8 size: 93.09 GiB fs: ext4 label: N/A
uuid: d027ec61-a24e-4918-b2c7-f2308415e55e
ID-9: /dev/sdb1 maj-min: 8:17 size: 3.52 GiB fs: iso9660
ID-10: /dev/sdb2 maj-min: 8:18 size: 4 MiB fs: vfat label: MISO_EFI
uuid: AC16-6392
USB:
Hub-1: 1-0:1 info: full speed or root hub ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 8087:8000
class-ID: 0900
Hub-3: 2-0:1 info: full speed or root hub ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 8087:8008
class-ID: 0900
Device-1: 2-1.1:3 info: Alcor Micro Flash Drive type: mass storage
driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 power: 200mA chip-ID: 058f:6387 class-ID: 0806
serial: <filter>
Device-2: 2-1.3:4 info: Intel Bluetooth wireless interface type: bluetooth
driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
mode: 1.1 power: 100mA chip-ID: 8087:07dc class-ID: e001
Device-3: 2-1.4:5 info: Bison MSI Integrated Webcam type: video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
mode: 2.0 power: 500mA chip-ID: 5986:014c class-ID: 0e02
Device-4: 2-1.5:6 info: Realtek RTS5129 Card Reader Controller
type: <vendor specific> driver: rtsx_usb,rtsx_usb_ms,rtsx_usb_sdmmc
interfaces: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0
power: 500mA chip-ID: 0bda:0129 class-ID: ff00 serial: <filter>
Hub-5: 3-0:1 info: hi-speed hub with single TT ports: 14 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 3-1:2 info: Logitech Unifying Receiver type: keyboard,mouse,HID
driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 98mA
chip-ID: 046d:c52b class-ID: 0300
Hub-6: 4-0:1 info: super-speed hub ports: 4 rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 53.0 C mobo: N/A gpu: nouveau temp: 42.0 C
Fan Speeds (rpm): N/A
Repos:
Packages: pm: pacman pkgs: 1159 libs: 321 tools: pamac pm: flatpak pkgs: 0
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://bd.mirror.vanehost.com/Manjaro/stable/$repo/$arch
2: https://mirrors.nic.cz/manjaro/stable/$repo/$arch
3: https://mirror.easyname.at/manjaro/stable/$repo/$arch
4: https://mirror.it4i.cz/manjaro/stable/$repo/$arch
5: http://mirror.is.co.za/mirrors/manjaro.org/stable/$repo/$arch
6: https://mirrors.xtom.de/manjaro/stable/$repo/$arch
7: https://gsl-syd.mm.fcix.net/manjaro/stable/$repo/$arch
8: https://mirror.math.princeton.edu/pub/manjaro/stable/$repo/$arch
9: https://mirror.phoepsilonix.love/manjaro/stable/$repo/$arch
10: https://mirror.bardia.tech/manjaro/stable/$repo/$arch
11: https://mirrors.pku.edu.cn/manjaro/stable/$repo/$arch
12: https://southfront.mm.fcix.net/manjaro/stable/$repo/$arch
13: https://linorg.usp.br/manjaro/stable/$repo/$arch
14: https://mirror.2degrees.nz/manjaro/stable/$repo/$arch
15: http://mirror.datacenter.by/pub/mirrors/manjaro/stable/$repo/$arch
16: https://ct.mirror.garr.it/mirrors/manjaro/stable/$repo/$arch
17: https://ridgewireless.mm.fcix.net/manjaro/stable/$repo/$arch
18: https://mirror.seahost.de/manjaro/stable/$repo/$arch
19: https://mirror.csclub.uwaterloo.ca/manjaro/stable/$repo/$arch
20: https://mirror.netcologne.de/manjaro/stable/$repo/$arch
21: https://repo.iut.ac.ir/repo/manjaro/stable/$repo/$arch
22: https://mirrors.ustc.edu.cn/manjaro/stable/$repo/$arch
23: http://mirror.fcix.net/manjaro/stable/$repo/$arch
24: http://ftp.belnet.be/mirrors/manjaro/repos/stable/$repo/$arch
25: https://mirror.telepoint.bg/manjaro/stable/$repo/$arch
26: https://mirror.yandex.ru/mirrors/manjaro/stable/$repo/$arch
27: http://ftp.tsukuba.wide.ad.jp/Linux/manjaro/stable/$repo/$arch
28: https://mirrors.sonic.net/manjaro/stable/$repo/$arch
29: https://edgeuno-bog2.mm.fcix.net/manjaro/stable/$repo/$arch
30: http://manjaro.ucom.am/stable/$repo/$arch
31: https://mirror.ibakerserver.pt/manjaro/stable/$repo/$arch
32: https://irltoolkit.mm.fcix.net/manjaro/stable/$repo/$arch
33: https://ftp.linux.org.tr/manjaro/stable/$repo/$arch
34: https://mirror.dkm.cz/manjaro/stable/$repo/$arch
35: https://manjaro.mirror.wearetriple.com/stable/$repo/$arch
36: https://manjaro.mirrors.lavatech.top/stable/$repo/$arch
37: https://mirror.alpix.eu/manjaro/stable/$repo/$arch
38: https://mirror.xenyth.net/manjaro/stable/$repo/$arch
39: https://opencolo.mm.fcix.net/manjaro/stable/$repo/$arch
40: https://mirror.23m.com/manjaro/stable/$repo/$arch
41: https://mirrors.dotsrc.org/manjaro/stable/$repo/$arch
42: https://mirror.nyist.edu.cn/manjaro/stable/$repo/$arch
43: https://mirror.vinehost.net/manjaro/stable/$repo/$arch
44: https://forksystems.mm.fcix.net/manjaro/stable/$repo/$arch
45: https://mirrors.gigenet.com/manjaro/stable/$repo/$arch
46: https://manjaro.c3sl.ufpr.br/stable/$repo/$arch
47: https://nocix.mm.fcix.net/manjaro/stable/$repo/$arch
48: http://free.nchc.org.tw/manjaro/stable/$repo/$arch
49: https://mirror.ufro.cl/manjaro/stable/$repo/$arch
50: https://mirror.aarnet.edu.au/pub/manjaro/stable/$repo/$arch
51: https://manjaro.ynh.ovh/stable/$repo/$arch
52: https://mirrors.manjaro.org/repo/stable/$repo/$arch
53: https://mirror.ufam.edu.br/manjaro/stable/$repo/$arch
54: https://mirrors.jlu.edu.cn/manjaro/stable/$repo/$arch
55: https://ftp.cc.uoc.gr/mirrors/linux/manjaro/stable/$repo/$arch
56: https://manjaro.ipacct.com/manjaro/stable/$repo/$arch
57: https://uvermont.mm.fcix.net/manjaro/stable/$repo/$arch
58: https://ftp.caliu.cat/pub/distribucions/manjaro/stable/$repo/$arch
59: https://mirror.funami.tech/manjaro/stable/$repo/$arch
60: https://fosszone.csd.auth.gr/manjaro/stable/$repo/$arch
61: https://mirror.nju.edu.cn/manjaro/stable/$repo/$arch
62: http://manjaro.mirrors.uk2.net/stable/$repo/$arch
63: https://ftp.nluug.nl/pub/os/Linux/distr/manjaro/stable/$repo/$arch
64: https://coresite.mm.fcix.net/manjaro/stable/$repo/$arch
65: http://manjaro.mirrors.theom.nz/manjaro/stable/$repo/$arch
66: http://ftp.snt.utwente.nl/pub/linux/manjaro/stable/$repo/$arch
67: https://mirrors.tuna.tsinghua.edu.cn/manjaro/stable/$repo/$arch
68: https://mirror.init7.net/manjaro/stable/$repo/$arch
69: https://mirror.albony.xyz/manjaro/stable/$repo/$arch
70: https://manjaro.kyberorg.fi/stable/$repo/$arch
71: https://volico.mm.fcix.net/manjaro/stable/$repo/$arch
72: http://manjaro.grena.ge/stable/$repo/$arch
73: https://mirrors.xtom.jp/manjaro/stable/$repo/$arch
74: http://ftp.rz.tu-bs.de/pub/mirror/manjaro.org/repos/stable/$repo/$arch
75: https://mirror.futureweb.be/manjaro/stable/$repo/$arch
76: http://mirror.terrahost.no/linux/manjaro/stable/$repo/$arch
77: https://mirrors.xtom.ee/manjaro/stable/$repo/$arch
78: https://ask4.mm.fcix.net/manjaro/stable/$repo/$arch
79: https://mirrors.ocf.berkeley.edu/manjaro/stable/$repo/$arch
80: https://mirrors.ft.uam.es/manjaro/stable/$repo/$arch
81: https://ftp.gwdg.de/pub/linux/manjaro/stable/$repo/$arch
82: https://ziply.mm.fcix.net/manjaro/stable/$repo/$arch
83: http://mirror.xeonbd.com/manjaro/stable/$repo/$arch
84: https://manjaro.mirror.garr.it/manjaro/stable/$repo/$arch
85: https://ftp.psnc.pl/linux/manjaro/stable/$repo/$arch
86: https://mirrors.aliyun.com/manjaro/stable/$repo/$arch
87: https://mirrors.up.pt/pub/manjaro/stable/$repo/$arch
88: https://www.mirrorservice.org/sites/repo.manjaro.org/repos/stable/$repo/$arch
89: https://ftp.lysator.liu.se/pub/manjaro/stable/$repo/$arch
90: https://ftp.icm.edu.pl/pub/Linux/dist/manjaro/stable/$repo/$arch
91: https://codingflyboy.mm.fcix.net/manjaro/stable/$repo/$arch
92: http://kartolo.sby.datautama.net.id/manjaro/stable/$repo/$arch
93: https://mirror.kku.ac.th/manjaro/stable/$repo/$arch
94: https://mirror1.sox.rs/manjaro/stable/$repo/$arch
95: https://mirror.freedif.org/Manjaro/stable/$repo/$arch
96: https://ftpmirror1.infania.net/mirror/manjaro/stable/$repo/$arch
97: https://manjaro.kurdy.org/stable/$repo/$arch
98: https://ftp.halifax.rwth-aachen.de/manjaro/stable/$repo/$arch
99: https://mirrors.ucr.ac.cr/manjaro/stable/$repo/$arch
100: https://ohioix.mm.fcix.net/manjaro/stable/$repo/$arch
101: https://manjaro.repo.cure.edu.uy/stable/$repo/$arch
102: https://mirrors.netix.net/manjaro/stable/$repo/$arch
103: https://mirror.truenetwork.ru/manjaro/stable/$repo/$arch
104: https://manjaro.mirror.liquidtelecom.com/stable/$repo/$arch
105: https://mnvoip.mm.fcix.net/manjaro/stable/$repo/$arch
106: http://ftp.free.org/mirrors/repo.manjaro.org/repos/stable/$repo/$arch
107: http://ftp.dei.uc.pt/pub/linux/manjaro/stable/$repo/$arch
108: https://mirror.zetup.net/manjaro/stable/$repo/$arch
109: https://mirror1.cl.netactuate.com/manjaro/stable/$repo/$arch
110: https://mirrors.sjtug.sjtu.edu.cn/manjaro/stable/$repo/$arch
111: https://repo.ialab.dsu.edu/manjaro/stable/$repo/$arch
112: https://mirror.dc.uz/manjaro/stable/$repo/$arch
113: https://mirrors.piconets.webwerks.in/manjaro-mirror/stable/$repo/$arch
114: https://mirror.kamtv.ru/manjaro/stable/$repo/$arch
115: https://repos.silknet.com/manjaro/stable/$repo/$arch
116: https://mirror.alwyzon.net/manjaro/stable/$repo/$arch
117: https://mirrors.gethosted.online/manjaro/repos/stable/$repo/$arch
118: https://mirror.archlinux.tw/Manjaro/stable/$repo/$arch
119: http://ossmirror.mycloud.services/os/linux/manjaro/stable/$repo/$arch
120: https://mirror.koddos.net/manjaro/stable/$repo/$arch
121: https://ba.mirror.garr.it/mirrors/manjaro/stable/$repo/$arch
122: http://ftp.tu-chemnitz.de/pub/linux/manjaro/stable/$repo/$arch
123: https://muug.ca/mirror/manjaro/stable/$repo/$arch
124: http://ftp.riken.jp/Linux/manjaro/stable/$repo/$arch
125: https://manjarolinux-mirror.cloud.mu/stable/$repo/$arch
126: https://repo.skni.umcs.pl/manjaro/stable/$repo/$arch
127: https://fastmirror.pp.ua/manjaro/stable/$repo/$arch
128: http://manjaro.mirror.ac.za/stable/$repo/$arch
129: https://quantum-mirror.hu/mirrors/pub/manjaro/stable/$repo/$arch
130: https://nnenix.mm.fcix.net/manjaro/stable/$repo/$arch
Processes:
CPU top: 5 of 245
1: cpu: 1.2% command: xfce4-terminal pid: 2653 mem: 57.9 MiB (0.3%)
2: cpu: 0.6% command: xorg pid: 1173 mem: 100.3 MiB (0.6%)
3: cpu: 0.3% command: [kworker/u16:0-events_unbound] pid: 11
mem: 0.00 MiB (0.0%)
4: cpu: 0.1% command: init pid: 1 mem: 13.7 MiB (0.0%)
5: cpu: 0.1% command: gpg-agent pid: 788 mem: 3.23 MiB (0.0%)
Memory top: 5 of 245
1: mem: 100.3 MiB (0.6%) command: xorg pid: 1173 cpu: 0.6%
2: mem: 98.2 MiB (0.6%) command: xfwm4 pid: 1298 cpu: 0.1%
3: mem: 73.4 MiB (0.4%) command: xfce4-session pid: 1224 cpu: 0.0%
4: mem: 69.8 MiB (0.4%) command: xfdesktop pid: 1357 cpu: 0.1%
5: mem: 65.9 MiB (0.4%) command: blueman-applet started-by: python
pid: 1405 cpu: 0.0%
Info:
Processes: 245 Uptime: 21m wakeups: 0 Init: systemd v: 255 default: graphical
tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6 Shell: Bash v: 5.2.21
running-in: xfce4-terminal inxi: 3.3.31
[manjaro@manjaro ~]$ echo CPU
CPU
[manjaro@manjaro ~]$ LANG=C lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 39 bits physical, 48 bits virtual
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-7
Vendor ID: GenuineIntel
Model name: Intel(R) Core(TM) i7-5700HQ CPU @ 2.70GHz
CPU family: 6
Model: 71
Thread(s) per core: 2
Core(s) per socket: 4
Socket(s): 1
Stepping: 1
CPU(s) scaling MHz: 33%
CPU max MHz: 3500.0000
CPU min MHz: 800.0000
BogoMIPS: 5389.25
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mc
a cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss
ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arc
h_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vm
x est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse
4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave av
x f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb
pti ssbd ibrs ibpb stibp tpr_shadow flexpriority ept v
pid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms
invpcid rdseed adx smap intel_pt xsaveopt dtherm ida a
rat pln pts vnmi md_clear flush_l1d
Virtualization features:
Virtualization: VT-x
Caches (sum of all):
L1d: 128 KiB (4 instances)
L1i: 128 KiB (4 instances)
L2: 1 MiB (4 instances)
L3: 6 MiB (1 instance)
NUMA:
NUMA node(s): 1
NUMA node0 CPU(s): 0-7
Vulnerabilities:
Gather data sampling: Not affected
Itlb multihit: KVM: Mitigation: VMX disabled
L1tf: Mitigation; PTE Inversion; VMX conditional cache flushe
s, SMT vulnerable
Mds: Mitigation; Clear CPU buffers; SMT vulnerable
Meltdown: Mitigation; PTI
Mmio stale data: Unknown: No mitigations
Retbleed: Not affected
Spec rstack overflow: Not affected
Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl
Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer
sanitization
Spectre v2: Mitigation; Retpolines, IBPB conditional, IBRS_FW, STIB
P conditional, RSB filling, PBRSB-eIBRS Not affected
Srbds: Mitigation; Microcode
Tsx async abort: Not affected
[manjaro@manjaro ~]$ echo Drivers
Drivers
[manjaro@manjaro ~]$ mhwd -li
Warning: config '/var/lib/mhwd/db/pci/network_drivers/r8168/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/network_drivers/rt3562sta/MHWDCONFIG' is invalid!
> Installed PCI configs:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-linux 2018.05.04 true PCI
Warning: No installed USB configs!
[manjaro@manjaro ~]$ mhwd -l
Warning: config '/var/lib/mhwd/db/pci/network_drivers/r8168/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/network_drivers/rt3562sta/MHWDCONFIG' is invalid!
> 0000:01:00.0 (0302:10de:139a) Display controller nVidia Corporation:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-hybrid-intel-nvidia-prime 2023.03.23 false PCI
video-hybrid-intel-nvidia-470xx-prime 2023.03.23 false PCI
video-hybrid-intel-nvidia-390xx-bumblebee 2023.03.23 false PCI
video-nvidia 2023.03.23 false PCI
video-nvidia-470xx 2023.03.23 false PCI
video-nvidia-390xx 2023.03.23 false PCI
video-linux 2018.05.04 true PCI
> 0000:00:02.0 (0300:8086:1612) Display controller Intel Corporation:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-hybrid-intel-nvidia-prime 2023.03.23 false PCI
video-hybrid-intel-nvidia-470xx-prime 2023.03.23 false PCI
video-hybrid-intel-nvidia-390xx-bumblebee 2023.03.23 false PCI
video-linux 2018.05.04 true PCI
video-modesetting 2020.01.13 true PCI
video-vesa 2017.03.12 true PCI
[manjaro@manjaro ~]$ echo Kernels
Kernels
[manjaro@manjaro ~]$ mhwd-kernel -li
Currently running: 6.6.10-1-MANJARO (linux66)
The following kernels are installed in your system:
warning: database file for 'core' does not exist (use '-Sy' to download)
warning: database file for 'extra' does not exist (use '-Sy' to download)
warning: database file for 'multilib' does not exist (use '-Sy' to download)
* linux66
warning: database file for 'core' does not exist (use '-Sy' to download)
warning: database file for 'extra' does not exist (use '-Sy' to download)
warning: database file for 'multilib' does not exist (use '-Sy' to download)
[manjaro@manjaro ~]$ echo "package content"
package content
[manjaro@manjaro ~]$ echo "partitioning"
partitioning
[manjaro@manjaro ~]$ lsblk -fa
NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINTS
loop0 squashfs 4.0 0 100% /run/miso/sfs/livefs
loop1 squashfs 4.0 0 100% /run/miso/sfs/mhwdfs
loop2 squashfs 4.0 0 100% /run/miso/sfs/desktopfs
loop3 squashfs 4.0 0 100% /run/miso/sfs/rootfs
loop4
sda
├─sda1 vfat FAT32 4A0E-09ED
├─sda2
├─sda3 ntfs BC2E1BE82E1B9A8A
├─sda4 ntfs 54A8E849A8E82AE6
├─sda5 vfat FAT32 5B8D-00FD
├─sda6 ext4 1.0 b1a63038-fdd5-433a-a729-7c4c363934ce
├─sda7 swap 1 d0c4a646-3d6b-4ca7-affb-d299c6ac399c
└─sda8 ext4 1.0 d027ec61-a24e-4918-b2c7-f2308415e55e
sdb iso9660 Joliet Extens MANJARO_XFCE_2313 2024-01-13-03-08-57-00 0 100% /run/miso/bootmnt
├─sdb1 iso9660 Joliet Extens MANJARO_XFCE_2313 2024-01-13-03-08-57-00
└─sdb2 vfat FAT12 MISO_EFI AC16-6392
sr0
[manjaro@manjaro ~]$ LANG=C sudo parted -l
Model: ATA Intenso SSD Sat (scsi)
Disk /dev/sda: 507GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 106MB 105MB fat32 EFI system partition boot, esp, no_automount
2 106MB 123MB 16.8MB Microsoft reserved partition msftres, no_automount
3 123MB 314GB 314GB ntfs Basic data partition msftdata
4 314GB 315GB 564MB ntfs hidden, diag, no_automount
5 315GB 316GB 1049MB fat32 boot, esp
6 316GB 389GB 73.4GB ext4
7 389GB 407GB 17.8GB linux-swap(v1) swap
8 407GB 507GB 100GB ext4
Model: Intenso Alu Line (scsi)
Disk /dev/sdb: 8006MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
2 3780MB 3784MB 4194kB primary esp
[manjaro@manjaro ~]$ echo "PCI Drives"
PCI Drives
[manjaro@manjaro ~]$ lspci -k
00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge - DMI (rev 0a)
Subsystem: Micro-Star International Co., Ltd. [MSI] Broadwell-U Host Bridge - DMI
00:01.0 PCI bridge: Intel Corporation Broadwell-U PCI Express x16 Controller (rev 0a)
Subsystem: Micro-Star International Co., Ltd. [MSI] Broadwell-U PCI Express x16 Controller
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 5600 (rev 0a)
DeviceName: Onboard IGD
Subsystem: Micro-Star International Co., Ltd. [MSI] HD Graphics 5600
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 0a)
Subsystem: Micro-Star International Co., Ltd. [MSI] Broadwell-U Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family USB xHCI
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family MEI Controller
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family USB EHCI
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset High Definition Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family PCI Express Root Port
Kernel driver in use: pcieport
00:1c.6 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 (rev d5)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family PCI Express Root Port
Kernel driver in use: pcieport
00:1c.7 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #8 (rev d5)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family PCI Express Root Port
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family USB EHCI
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05)
Subsystem: Micro-Star International Co., Ltd. [MSI] HM86 Express LPC Controller
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode]
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family SMBus Controller
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 950M] (rev a2)
Subsystem: Micro-Star International Co., Ltd. [MSI] GM107M [GeForce GTX 950M]
Kernel driver in use: nouveau
Kernel modules: nouveau
03:00.0 Network controller: Intel Corporation Wireless 3160 (rev 83)
Subsystem: Intel Corporation Dual Band Wireless AC 3160 [Wilkins Peak 1]
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
04:00.0 Ethernet controller: Qualcomm Atheros Killer E220x Gigabit Ethernet Controller (rev 13)
Subsystem: Micro-Star International Co., Ltd. [MSI] Killer E220x Gigabit Ethernet Controller
Kernel driver in use: alx
Kernel modules: alx
[manjaro@manjaro ~]$ echo "RAM"
RAM
[manjaro@manjaro ~]$ free
total used free shared buff/cache available
Mem: 16293116 1416320 13549876 337340 1947992 14876796
Swap: 0 0 0
[manjaro@manjaro ~]$ echo "Storage usage"
Storage usage
[manjaro@manjaro ~]$ LANG=C df -h
Filesystem Size Used Avail Use% Mounted on
dev 7.8G 0 7.8G 0% /dev
run 7.8G 83M 7.7G 2% /run
efivarfs 128K 99K 25K 81% /sys/firmware/efi/efivars
/dev/sdb 3.6G 3.6G 0 100% /run/miso/bootmnt
cowspace 256M 0 256M 0% /run/miso/cowspace
overlay_root 12G 156M 12G 2% /run/miso/overlay_root
/dev/loop0 157M 157M 0 100% /run/miso/sfs/livefs
/dev/loop1 1.1G 1.1G 0 100% /run/miso/sfs/mhwdfs
/dev/loop2 1.5G 1.5G 0 100% /run/miso/sfs/desktopfs
/dev/loop3 768M 768M 0 100% /run/miso/sfs/rootfs
overlay 12G 156M 12G 2% /
tmpfs 7.8G 0 7.8G 0% /dev/shm
tmpfs 7.8G 8.0K 7.8G 1% /tmp
tmpfs 7.8G 2.8M 7.8G 1% /etc/pacman.d/gnupg
tmpfs 1.6G 132K 1.6G 1% /run/user/1000
And here is the log of the installation:
[manjaro@manjaro ~]$ sudo calamares -d
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
11:47:34 [6]: Calamares::Settings::Settings(const QString&, bool)
Using Calamares settings file at "/etc/calamares/settings.conf"
.. Required settings.conf key hide-back-and-next-during-exec is missing.
11:47:34 [6]: void Logger::setupLogfile()
Using log file: "/root/.cache/calamares/session.log"
11:47:34 [6]: void CalamaresApplication::init()
Calamares version: 3.2.62-19
.. languages: "ar, as, ast, az, az_AZ, be, bg, bn, ca, ca@valencia, cs_CZ, da, de, el, en, en_GB, eo, es, es_MX, et, eu, fa, fi_FI, fr, fur, gl, he, hi, hr, hu, id, is, it_IT, ja, ko, lt, ml, mr, nb, nl, oc, pl, pt_BR, pt_PT, ro, ru, si, sk, sl, sq, sr, sr@latin, sv, tg, th, tr_TR, uk, vi, zh_CN, zh_TW"
11:47:34 [6]: bool CalamaresUtils::initQmlModulesDir()
Using Calamares QML directory "/usr/share/calamares/qml"
11:47:34 [6]: Calamares::Branding::Branding(const QString&, QObject*)
Using Calamares branding file at "/usr/share/calamares/branding/manjaro/branding.desc"
11:47:34 [2]: Calamares::Branding::Branding(const QString&, QObject*)
WARNING: the branding component "/usr/share/calamares/branding/manjaro" does not ship translations.
11:47:34 [6]: Calamares::Branding::Branding(const QString&, QObject*)
Loaded branding component "manjaro"
.. No translation for "tz_" "C" using default (en)
.. No translation for "calamares_" "C" using default (en)
.. STARTUP: initSettings, initQmlPath, initBranding done
.. STARTUP: initModuleManager: module init started
11:47:34 [2]: static Calamares::ModuleSystem::Descriptor Calamares::ModuleSystem::Descriptor::fromDescriptorData(const QVariantMap&, const QString&)
WARNING: Descriptor file "/usr/lib/calamares/modules/servicescfg/module.desc"
WARNING: .. Module descriptor contains extra keys:
"requires"
11:47:34 [6]: void Calamares::ModuleManager::doInit()
Found 57 modules
11:47:34 [6]: void CalamaresApplication::initView()
STARTUP: initModuleManager: all modules init done
11:47:34 [6]: void CalamaresApplication::initView()
STARTUP: initJobQueue done
11:47:34 [6]: CalamaresWindow::CalamaresWindow(QWidget*)
Available desktop QSize(1920, 1043) minimum size QSize(1024, 520)
.. Proposed window size: 1024 560
11:47:34 [6]: QString CalamaresUtils::searchQmlFile(QmlSearch, const QString&)
Looking for QML for "calamares-sidebar"
.. Looking at QML file "/usr/share/calamares/branding/manjaro/calamares-sidebar.qml"
11:47:34 [6]: void CalamaresApplication::initView()
STARTUP: CalamaresWindow created; loadModules started
11:47:34 [6]: void Config::initLanguages()
Trying to match locale "C"
11:47:34 [6]: void Config::initLanguages()
Trying to match locale QLocale(C, Default, Default)
.. Trying to match approximate locale QLocale::C
.. Trying to match English (US)
11:47:34 [6]: void Config::setLocaleIndex(int)
Index 14 Selected locale "en"
.. Loaded QRC translation "tz_" "en"
.. Loaded QRC translation "calamares_" "en"
11:47:34 [6]: QPair<CalamaresUtils::Network::RequestStatus, QNetworkReply*> CalamaresUtils::Network::synchronousRun(QNetworkAccessManager*, const QUrl&, const RequestOptions&)
HTTP error QNetworkReply::HostNotFoundError on request for QUrl("https://ipapi.co/json")
11:47:34 [2]: virtual QString CalamaresUtils::GeoIP::GeoIPJSON::rawReply(const QByteArray&)
WARNING: Invalid YAML data for GeoIPJSON
11:47:34 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule "welcome@welcome" loading complete.
11:47:34 [6]: QStringList loadLocales(const QString&)
Loading locales from "/usr/share/i18n/SUPPORTED"
.. Read 492 lines
.. After filtering 317 lines
11:47:34 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule "locale@locale" loading complete.
11:47:34 [6]: KeyboardModelsModel::KeyboardModelsModel(QObject*)
Loaded 186 keyboard models
11:47:34 [6]: KeyboardPage::KeyboardPage(Config*, QWidget*)
Variants now total= 0 selected= -1
.. Loaded QRC translation "kb_" "en"
11:47:34 [6]: void Config::detectCurrentKeyboardLayout()
("pc", "de", "inet(evdev)", "terminate(ctrl_alt_bksp)\"")
11:47:35 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule "keyboard@keyboard" loading complete.
11:47:35 [6]: CalamaresUtils::Partition::InternalManager::InternalManager()
KPMCore backend starting ..
11:47:35 [6]: Loaded backend plugin: "pmsfdiskbackendplugin"
.. Backend @0x560cfee074b0 "pmsfdiskbackendplugin" "1"
11:47:35 [2]: virtual void PartitionViewStep::setConfigurationMap(const QVariantMap&)
WARNING: Partition-module setting *defaultPartitionTableType* is unset, will use gpt for efi or msdos for bios
11:47:35 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule "partition@partition" loading complete.
11:47:35 [2]: void copyLegacy(const QVariantMap&, const QString&, QVariantMap&, const QString&)
WARNING: Legacy *users* key "userShell" overrides hostname-settings.
11:47:35 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule "users@users" loading complete.
11:47:35 [6]: virtual void Config::setConfigurationMap(const QVariantMap&)
Using module ID "packagechooser@packagechooser"
11:47:35 [6]: void fillModel(PackageListModel*, const QVariantList&)
Loading PackageChooser model items from config
.. Loaded PackageChooser with 3 entries.
11:47:35 [2]: QPixmap::scaled: Pixmap is a null pixmap
11:47:35 [2]: QPixmap::scaled: Pixmap is a null pixmap
11:47:35 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule "packagechooser@packagechooser" loading complete.
11:47:35 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule "summary@summary" loading complete.
11:47:35 [6]: void Calamares::ModuleManager::loadModules()
Module "partition@partition" already loaded.
11:47:35 [6]: Calamares::SlideshowQML::SlideshowQML(QWidget*)
QML import paths:
"/usr/share/calamares/qml"
"/usr/bin"
"qrc:/qt-project.org/imports"
"/usr/lib/qt/qml"
11:47:35 [6]: Calamares::SlideshowQML::SlideshowQML(QWidget*)
QML load on startup, API 2.
11:47:35 [2]: QThread::setPriority: Cannot set priority, thread is not running
11:47:35 [2]: virtual void MachineIdJob::setConfigurationMap(const QVariantMap&)
WARNING: MachineId: configuration setting *symlink* is deprecated, use *dbus-symlink*.
11:47:35 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule "machineid@machineid" loading complete.
11:47:35 [6]: void Calamares::ModuleManager::loadModules()
Module "locale@locale" already loaded.
11:47:35 [6]: void Calamares::ModuleManager::loadModules()
Module "keyboard@keyboard" already loaded.
11:47:35 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule "luksopenswaphookcfg@luksopenswaphookcfg" loading complete.
11:47:35 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule "luksbootkeyfile@luksbootkeyfile" loading complete.
11:47:35 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule "initcpio@initcpio" loading complete.
11:47:35 [6]: void Calamares::ModuleManager::loadModules()
Module "users@users" already loaded.
11:47:35 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule "umount@umount" loading complete.
11:47:35 [2]: void Config::setConfigurationMap(const QVariantMap&)
WARNING: Configuring the finished module with deprecated restartNowEnabled settings
11:47:35 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule "finished@finished" loading complete.
11:47:35 [6]: setGeoIP(Config*, const QVariantMap&)::<lambda()>
GeoIP result for welcome= ""
11:47:35 [6]: void setCountry(Config*, const QString&, CalamaresUtils::GeoIP::Handler*)
Unusable country code ""
.. Obtained from "https://ipapi.co/json" ( 1 "country" )
.. Loaded QRC translation "kb_" "en"
11:47:35 [6]: void Calamares::SlideshowQML::loadQmlV2Complete()
QML component complete, API 2
11:47:35 [2]: file:///usr/share/calamares/branding/manjaro/slideshow/sponsor/SponsoredBy.qml: No such file or directory
.. Loading "/usr/share/calamares/branding/manjaro/slideshow/SlideShow.qml"
11:47:35 [6]: void CalamaresApplication::initViewSteps()
STARTUP: loadModules for all modules done
11:47:35 [6]: void Calamares::ModuleManager::checkRequirements()
Checking module requirements ..
11:47:35 [6]: void CalamaresApplication::initViewSteps()
STARTUP: Window now visible and ProgressTreeView populated
.. 9 view steps loaded.
11:47:35 [6]: QPair<CalamaresUtils::Network::RequestStatus, QNetworkReply*> CalamaresUtils::Network::synchronousRun(QNetworkAccessManager*, const QUrl&, const RequestOptions&)
HTTP error QNetworkReply::HostNotFoundError on request for QUrl("https://ipapi.co/json")
11:47:35 [2]: unknown file system type "" on "/dev/sda2"
11:47:35 [6]: void Config::xkbApply()
xkbmap selection changed to: "de" - ""
11:47:35 [6]: 76632261 63736347 4096
11:47:35 [6]: 137727 22713 4096
11:47:35 [6]: smartctl initialization failed for "/dev/sdb" : No such file or directory
11:47:35 [6]: error during smart output parsing for "/dev/sdb" : Success
11:47:35 [6]: bool GeneralRequirements::checkHasPower()
A battery exists, checking for mains power.
11:47:35 [6]: QPair<CalamaresUtils::Network::RequestStatus, QNetworkReply*> CalamaresUtils::Network::synchronousRun(QNetworkAccessManager*, const QUrl&, const RequestOptions&)
HTTP error QNetworkReply::HostNotFoundError on request for QUrl("https://manjaro.org")
11:47:35 [6]: Calamares::RequirementsList GeneralRequirements::checkRequirements()
GeneralRequirements output:
storage : 8482560409
enoughStorage : true
RAM : 1073741824
enoughRam : true
hasPower : true
hasInternet : false
isRoot : true
11:47:35 [6]: void Calamares::RequirementsChecker::addCheckedRequirements(Calamares::Module*)
Got 5 requirement results from "welcome"
11:47:35 [6]: QList<Device*> PartUtils::getDevices(DeviceType)
Removing unsuitable devices: 2 candidates.
.. Running ("blkid", "/dev/sda")
.. Finished. Exit code: 0 output:
/dev/sda: PTUUID="ee74fc6a-1c37-4f2d-b9e6-da847de05b13" PTTYPE="gpt"
.. Running ("blkid", "/dev/sda1")
.. Finished. Exit code: 0 output:
/dev/sda1: UUID="4A0E-09ED" BLOCK_SIZE="512" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="57e871f6-e4cc-4c6e-ab90-82071d9b57d2"
.. Running ("blkid", "/dev/sda2")
.. Finished. Exit code: 0 output:
/dev/sda2: PARTLABEL="Microsoft reserved partition" PARTUUID="0954f1e2-62fe-4c14-8360-d459d678e90d"
.. Running ("blkid", "/dev/sda3")
.. Finished. Exit code: 0 output:
/dev/sda3: BLOCK_SIZE="512" UUID="BC2E1BE82E1B9A8A" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="ebbba76e-8ebc-4948-89b2-35d92fb1e795"
.. Running ("blkid", "/dev/sda4")
.. Finished. Exit code: 0 output:
/dev/sda4: BLOCK_SIZE="512" UUID="54A8E849A8E82AE6" TYPE="ntfs" PARTUUID="2e4baa5e-a92a-435b-9951-3d8f2aac8290"
.. Running ("blkid", "")
.. Target cmd: ("blkid", "") Exit code: 2 (no output)
.. Running ("blkid", "/dev/sdb")
.. Finished. Exit code: 0 output:
/dev/sdb: BLOCK_SIZE="2048" UUID="2024-01-13-03-08-57-00" LABEL="MANJARO_XFCE_2313" TYPE="iso9660" PTTYPE="dos"
.. Removing device with iso9660 filesystem (probably a CD) on it "/dev/sdb"
.. there are 1 devices left.
11:47:36 [6]: void PartitionCoreModule::doInit()
LIST OF DETECTED DEVICES:
.. node capacity name prettyName
.. "/dev/sda" 506800627200 DevName$407d75b3 DevNamePretty$3cb18719
.. 1 devices detected.
11:47:36 [6]: void Calamares::RequirementsChecker::reportProgress()
Remaining modules: 1
"partition"
11:47:37 [6]: void Calamares::RequirementsChecker::reportProgress()
Remaining modules: 1
"partition"
.. Running ("blkid", "-s", "TYPE", "-o", "value", "/dev/sda1")
.. Finished. Exit code: 0 output:
vfat
11:47:38 [6]: FstabEntryList PartUtils::lookForFstabEntries(const QString&)
Checking device "/dev/sda1" for fstab (fs= "vfat" )
.. Running ("mount", "-o", "ro", "/dev/sda1", "/tmp/calamares-Batmsp")
.. Running ("udevadm", "settle")
.. Running ("sync")
11:47:38 [2]: FstabEntryList PartUtils::lookForFstabEntries(const QString&)
WARNING: Could not read fstab from mounted fs
.. Running ("umount", "-R", "/tmp/calamares-Batmsp")
.. Running ("udevadm", "settle")
.. Running ("sync")
11:47:38 [6]: bool PartUtils::canBeResized(Partition*, const Logger::Once&)
Can not resize "/dev/sda1" , filesystem "fat32" does not support resize.
.. os-prober lines after cleanup:
"/dev/sda1@/efi/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi"
11:47:38 [6]: void PartitionCoreModule::scanForEfiSystemPartitions()
system is EFI and new EFI system partition has been found.
11:47:38 [6]: void Calamares::RequirementsChecker::addCheckedRequirements(Calamares::Module*)
Got 1 requirement results from "partition"
11:47:38 [6]: void ChoicePage::updateDeviceStatePreview()
Updating partitioning state widgets.
11:47:38 [6]: void ChoicePage::setupActions()
Setting up actions for "/dev/sda" with 1 entries.
.. Can not resize "/dev/sda1" , filesystem "fat32" does not support resize.
.. Checking if "/dev/sda1" can be replaced.
.. NO, insufficient storage
Required storage B: 9019431321 "(7.9GiB)"
Available storage B: 104857600 "(0GiB)"
.. Can not resize "/dev/sda2" , filesystem "unknown" does not support resize.
.. Checking if "/dev/sda2" can be replaced.
.. NO, insufficient storage
Required storage B: 9019431321 "(7.9GiB)"
Available storage B: 16777216 "(0GiB)"
.. Partition "/dev/sda3" authorized for resize + autopartition install.
.. contains resizable "/dev/sda3"
.. Checking if "/dev/sda3" can be replaced.
.. Partition "/dev/sda3" authorized for replace install.
.. contains replaceable "/dev/sda3"
.. NO, insufficient storage
Required storage B: 11166914969 "(10.4GiB)"
Available storage B: 93036544 "(0GiB)" for "/dev/sda4" length: 1101824 sectorsUsed: 920112 fsType: "ntfs"
.. Checking if "/dev/sda4" can be replaced.
.. NO, insufficient storage
Required storage B: 9019431321 "(7.9GiB)"
Available storage B: 564133888 "(0GiB)"
.. Can not resize "/dev/sda" , filesystem "unknown" does not support resize.
.. Checking if "/dev/sda" can be replaced.
.. Partition "/dev/sda" authorized for replace install.
.. contains replaceable "unallocated"
11:47:38 [6]: ChoicePage::setupActions()::<lambda()>
Setting texts for 1 non-empty osprober entry
11:47:38 [6]: void ChoicePage::continueApplyDeviceChoice()
Previous device -1 new device 0
11:47:38 [6]: void ChoicePage::applyActionChoice(InstallChoice)
Prev -1 InstallChoice Config::Erase "erase"
11:47:38 [6]: PartitionTable* CreatePartitionTableJob::createTable()
CreatePartitionTableJob::createTable trying to make table for device "/dev/sda"
11:47:38 [6]: void Calamares::RequirementsChecker::finished()
All requirements have been checked.
11:47:38 [6]: void Calamares::RequirementsModel::describe() const
Requirements model has 6 items
.. requirement 0 "storage" satisfied? true mandatory? true
.. requirement 1 "ram" satisfied? true mandatory? true
.. requirement 2 "power" satisfied? true mandatory? false
.. requirement 3 "internet" satisfied? false mandatory? false
.. requirement 4 "root" satisfied? true mandatory? true
.. requirement 5 "partitions" satisfied? true mandatory? true
11:47:38 [2]: void PartitionCoreModule::scanForEfiSystemPartitions()
WARNING: system is EFI but no EFI system partitions found.
11:47:38 [6]: void PartitionCoreModule::scanForEfiSystemPartitions()
system is EFI and new EFI system partition has been found.
11:47:39 [6]: void PartitionCoreModule::dumpQueue() const
# Queue:
.. ## Device: "/dev/sda"
.. - CreatePartitionTableJob
.. - CreatePartitionJob
.. - SetPartFlagsJob
.. - CreatePartitionJob
11:47:39 [6]: void ChoicePage::updateActionChoicePreview(InstallChoice)
Updating partitioning preview widgets.
11:47:41 [6]: static LocaleConfiguration LocaleConfiguration::fromLanguageAndLocation(const QString&, const QStringList&, const QString&)
Mapping "en" in "US" to locale.
.. Got best match for "en" as "en_ZW.UTF-8"
.. Got best match for "en_US" as "en_US.UTF-8"
11:47:41 [6]: static LocaleConfiguration LocaleConfiguration::fromLanguageAndLocation(const QString&, const QStringList&, const QString&)
Mapping "en" in "US" to locale.
.. Got best match for "en" as "en_ZW.UTF-8"
.. Got best match for "en_US" as "en_US.UTF-8"
11:47:41 [6]: static LocaleConfiguration LocaleConfiguration::fromLanguageAndLocation(const QString&, const QStringList&, const QString&)
Mapping "en" in "US" to locale.
.. Got best match for "en" as "en_ZW.UTF-8"
.. Got best match for "en_US" as "en_US.UTF-8"
11:47:42 [6]: void Config::guessLocaleKeyboardLayout()
Got locale language "en_US.UTF-8"
.. looking for locale part "US"
.. matched "us"
11:47:43 [6]: void guessLayout(const QStringList&, KeyboardLayoutModel*, KeyboardVariantsModel*)
Next level: "en"
11:47:43 [6]: void Config::xkbApply()
xkbmap selection changed to: "us" - ""
11:47:45 [6]: void Config::xkbApply()
xkbmap selection changed to: "de" - ""
11:47:49 [6]: void ChoicePage::applyActionChoice(InstallChoice)
Prev -1 InstallChoice Config::Manual "manual"
11:47:49 [6]: void ChoicePage::updateActionChoicePreview(InstallChoice)
Updating partitioning preview widgets.
11:47:52 [6]: virtual void PartitionViewStep::next()
Choice applied: Config::Manual
11:47:52 [2]: unknown file system type "" on "/dev/sda2"
11:47:52 [6]: 76632261 63736347 4096
11:47:52 [6]: 137727 22713 4096
11:47:52 [6]: void Calamares::restoreSelectedBootLoader(QComboBox&, const QString&)
No path to restore, choosing default
11:47:52 [6]: void Calamares::restoreSelectedBootLoader(QComboBox&, const QString&)
No path to restore, choosing default
11:47:52 [2]: QBasicTimer::start: Timers cannot be started from another thread
11:47:52 [2]: QBasicTimer::start: Timers cannot be started from another thread
11:47:52 [2]: QBasicTimer::start: Timers cannot be started from another thread
11:48:26 [6]: void Calamares::restoreSelectedBootLoader(QComboBox&, const QString&)
No path to restore, choosing default
11:48:52 [6]: void Calamares::restoreSelectedBootLoader(QComboBox&, const QString&)
No path to restore, choosing default
11:49:18 [6]: void Calamares::restoreSelectedBootLoader(QComboBox&, const QString&)
No path to restore, choosing default
11:49:47 [6]: void Calamares::restoreSelectedBootLoader(QComboBox&, const QString&)
No path to restore, choosing default
11:51:21 [6]: void Calamares::restoreSelectedBootLoader(QComboBox&, const QString&)
No path to restore, choosing default
11:51:23 [6]: void Calamares::restoreSelectedBootLoader(QComboBox&, const QString&)
No path to restore, choosing default
11:51:24 [6]: void Calamares::restoreSelectedBootLoader(QComboBox&, const QString&)
No path to restore, choosing default
11:51:26 [6]: void Calamares::restoreSelectedBootLoader(QComboBox&, const QString&)
No path to restore, choosing default
11:53:05 [6]: void Calamares::restoreSelectedBootLoader(QComboBox&, const QString&)
No path to restore, choosing default
11:53:58 [6]: void Calamares::restoreSelectedBootLoader(QComboBox&, const QString&)
No path to restore, choosing default
11:54:27 [6]: void Calamares::restoreSelectedBootLoader(QComboBox&, const QString&)
No path to restore, choosing default
11:55:03 [6]: void Calamares::restoreSelectedBootLoader(QComboBox&, const QString&)
No path to restore, choosing default
11:55:50 [6]: void Config::updateGlobalStorage(const QStringList&) const
QPair("packagechooser","packagechooser") selected "libreoffice-still"
11:55:50 [2]: QObject::setParent: Cannot set parent, new parent is in a different thread
11:55:50 [6]: virtual QString PartitionViewStep::prettyStatus() const
Summary for Partition 1 Config::Manual
11:55:50 [6]: QStringList findEssentialLVs(const QList<PartitionCoreModule::DeviceInfo*>&)
Checking LVM use on 1 devices
11:55:50 [6]: QVariantList FillGlobalStorageJob::createPartitionList() const
Building partition information map
.. partitions on "/dev/sda"
.. mapping for "/dev/sda1" "/dev/sda1"
partlabel : "EFI system partition"
partition-uuid (partuuid) : "PartUUID$33f5f848"
parttype : "C12A7328-F81F-11D2-BA4B-00A0C93EC93B"
partattrs : "9223372036854775808"
mountPoint: : ""
fs: : "fat32"
fsName : "fat32"
filesystem-uuid (uuid) : "FSUUID$c7a1c9b6"
claimed : "false"
.. mapping for "/dev/sda2" "/dev/sda2"
partlabel : "Microsoft reserved partition"
partition-uuid (partuuid) : "PartUUID$2625420d"
parttype : "E3C9E316-0B5C-4DB8-817D-F92DF00215AE"
partattrs : "9223372036854775808"
mountPoint: : ""
fs: : "unknown"
fsName : "unknown"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "false"
.. mapping for "/dev/sda3" "/dev/sda3"
partlabel : "Basic data partition"
partition-uuid (partuuid) : "PartUUID$866fb330"
parttype : "EBD0A0A2-B9E5-4433-87C0-68B6B72699C7"
partattrs : "0"
mountPoint: : ""
fs: : "ntfs"
fsName : "ntfs"
filesystem-uuid (uuid) : "FSUUID$168f6846"
claimed : "false"
.. mapping for "/dev/sda4" "/dev/sda4"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$5e62f692"
parttype : "DE94BBA4-06D1-4D40-A16A-BFD50179D6AC"
partattrs : "9223372036854775809"
mountPoint: : ""
fs: : "ntfs"
fsName : "ntfs"
filesystem-uuid (uuid) : "FSUUID$5b1f522"
claimed : "false"
.. mapping for "" "New Partition"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$73610633"
parttype : ""
partattrs : "0"
mountPoint: : "/boot/efi"
fs: : "fat32"
fsName : "fat32"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "true"
.. mapping for "" "New Partition"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$73610633"
parttype : ""
partattrs : "0"
mountPoint: : ""
fs: : "linuxswap"
fsName : "linuxswap"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "true"
.. mapping for "" "New Partition"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$73610633"
parttype : ""
partattrs : "0"
mountPoint: : "/"
fs: : "ext4"
fsName : "ext4"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "true"
.. mapping for "" "New Partition"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$73610633"
parttype : ""
partattrs : "0"
mountPoint: : "/home"
fs: : "ext4"
fsName : "ext4"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "true"
11:55:50 [6]: QVariantList FillGlobalStorageJob::createPartitionList() const
Building partition information map
.. partitions on "/dev/sda"
.. mapping for "/dev/sda1" "/dev/sda1"
partlabel : "EFI system partition"
partition-uuid (partuuid) : "PartUUID$33f5f848"
parttype : "C12A7328-F81F-11D2-BA4B-00A0C93EC93B"
partattrs : "9223372036854775808"
mountPoint: : ""
fs: : "fat32"
fsName : "fat32"
filesystem-uuid (uuid) : "FSUUID$c7a1c9b6"
claimed : "false"
.. mapping for "/dev/sda2" "/dev/sda2"
partlabel : "Microsoft reserved partition"
partition-uuid (partuuid) : "PartUUID$2625420d"
parttype : "E3C9E316-0B5C-4DB8-817D-F92DF00215AE"
partattrs : "9223372036854775808"
mountPoint: : ""
fs: : "unknown"
fsName : "unknown"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "false"
.. mapping for "/dev/sda3" "/dev/sda3"
partlabel : "Basic data partition"
partition-uuid (partuuid) : "PartUUID$866fb330"
parttype : "EBD0A0A2-B9E5-4433-87C0-68B6B72699C7"
partattrs : "0"
mountPoint: : ""
fs: : "ntfs"
fsName : "ntfs"
filesystem-uuid (uuid) : "FSUUID$168f6846"
claimed : "false"
.. mapping for "/dev/sda4" "/dev/sda4"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$5e62f692"
parttype : "DE94BBA4-06D1-4D40-A16A-BFD50179D6AC"
partattrs : "9223372036854775809"
mountPoint: : ""
fs: : "ntfs"
fsName : "ntfs"
filesystem-uuid (uuid) : "FSUUID$5b1f522"
claimed : "false"
.. mapping for "" "New Partition"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$73610633"
parttype : ""
partattrs : "0"
mountPoint: : "/boot/efi"
fs: : "fat32"
fsName : "fat32"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "true"
.. mapping for "" "New Partition"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$73610633"
parttype : ""
partattrs : "0"
mountPoint: : ""
fs: : "linuxswap"
fsName : "linuxswap"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "true"
.. mapping for "" "New Partition"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$73610633"
parttype : ""
partattrs : "0"
mountPoint: : "/"
fs: : "ext4"
fsName : "ext4"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "true"
.. mapping for "" "New Partition"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$73610633"
parttype : ""
partattrs : "0"
mountPoint: : "/home"
fs: : "ext4"
fsName : "ext4"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "true"
11:55:50 [2]: QLayout: Attempting to add QLayout "" to QWidget "", which already has a layout
11:55:50 [2]: QObject::setParent: Cannot set parent, new parent is in a different thread
11:55:50 [6]: QStringList findEssentialLVs(const QList<PartitionCoreModule::DeviceInfo*>&)
Checking LVM use on 1 devices
11:55:50 [6]: QVariantList FillGlobalStorageJob::createPartitionList() const
Building partition information map
.. partitions on "/dev/sda"
.. mapping for "/dev/sda1" "/dev/sda1"
partlabel : "EFI system partition"
partition-uuid (partuuid) : "PartUUID$33f5f848"
parttype : "C12A7328-F81F-11D2-BA4B-00A0C93EC93B"
partattrs : "9223372036854775808"
mountPoint: : ""
fs: : "fat32"
fsName : "fat32"
filesystem-uuid (uuid) : "FSUUID$c7a1c9b6"
claimed : "false"
.. mapping for "/dev/sda2" "/dev/sda2"
partlabel : "Microsoft reserved partition"
partition-uuid (partuuid) : "PartUUID$2625420d"
parttype : "E3C9E316-0B5C-4DB8-817D-F92DF00215AE"
partattrs : "9223372036854775808"
mountPoint: : ""
fs: : "unknown"
fsName : "unknown"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "false"
.. mapping for "/dev/sda3" "/dev/sda3"
partlabel : "Basic data partition"
partition-uuid (partuuid) : "PartUUID$866fb330"
parttype : "EBD0A0A2-B9E5-4433-87C0-68B6B72699C7"
partattrs : "0"
mountPoint: : ""
fs: : "ntfs"
fsName : "ntfs"
filesystem-uuid (uuid) : "FSUUID$168f6846"
claimed : "false"
.. mapping for "/dev/sda4" "/dev/sda4"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$5e62f692"
parttype : "DE94BBA4-06D1-4D40-A16A-BFD50179D6AC"
partattrs : "9223372036854775809"
mountPoint: : ""
fs: : "ntfs"
fsName : "ntfs"
filesystem-uuid (uuid) : "FSUUID$5b1f522"
claimed : "false"
.. mapping for "" "New Partition"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$73610633"
parttype : ""
partattrs : "0"
mountPoint: : "/boot/efi"
fs: : "fat32"
fsName : "fat32"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "true"
.. mapping for "" "New Partition"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$73610633"
parttype : ""
partattrs : "0"
mountPoint: : ""
fs: : "linuxswap"
fsName : "linuxswap"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "true"
.. mapping for "" "New Partition"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$73610633"
parttype : ""
partattrs : "0"
mountPoint: : "/"
fs: : "ext4"
fsName : "ext4"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "true"
.. mapping for "" "New Partition"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$73610633"
parttype : ""
partattrs : "0"
mountPoint: : "/home"
fs: : "ext4"
fsName : "ext4"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "true"
11:55:50 [6]: QVariantList FillGlobalStorageJob::createPartitionList() const
Building partition information map
.. partitions on "/dev/sda"
.. mapping for "/dev/sda1" "/dev/sda1"
partlabel : "EFI system partition"
partition-uuid (partuuid) : "PartUUID$33f5f848"
parttype : "C12A7328-F81F-11D2-BA4B-00A0C93EC93B"
partattrs : "9223372036854775808"
mountPoint: : ""
fs: : "fat32"
fsName : "fat32"
filesystem-uuid (uuid) : "FSUUID$c7a1c9b6"
claimed : "false"
.. mapping for "/dev/sda2" "/dev/sda2"
partlabel : "Microsoft reserved partition"
partition-uuid (partuuid) : "PartUUID$2625420d"
parttype : "E3C9E316-0B5C-4DB8-817D-F92DF00215AE"
partattrs : "9223372036854775808"
mountPoint: : ""
fs: : "unknown"
fsName : "unknown"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "false"
.. mapping for "/dev/sda3" "/dev/sda3"
partlabel : "Basic data partition"
partition-uuid (partuuid) : "PartUUID$866fb330"
parttype : "EBD0A0A2-B9E5-4433-87C0-68B6B72699C7"
partattrs : "0"
mountPoint: : ""
fs: : "ntfs"
fsName : "ntfs"
filesystem-uuid (uuid) : "FSUUID$168f6846"
claimed : "false"
.. mapping for "/dev/sda4" "/dev/sda4"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$5e62f692"
parttype : "DE94BBA4-06D1-4D40-A16A-BFD50179D6AC"
partattrs : "9223372036854775809"
mountPoint: : ""
fs: : "ntfs"
fsName : "ntfs"
filesystem-uuid (uuid) : "FSUUID$5b1f522"
claimed : "false"
.. mapping for "" "New Partition"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$73610633"
parttype : ""
partattrs : "0"
mountPoint: : "/boot/efi"
fs: : "fat32"
fsName : "fat32"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "true"
.. mapping for "" "New Partition"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$73610633"
parttype : ""
partattrs : "0"
mountPoint: : ""
fs: : "linuxswap"
fsName : "linuxswap"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "true"
.. mapping for "" "New Partition"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$73610633"
parttype : ""
partattrs : "0"
mountPoint: : "/"
fs: : "ext4"
fsName : "ext4"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "true"
.. mapping for "" "New Partition"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$73610633"
parttype : ""
partattrs : "0"
mountPoint: : "/home"
fs: : "ext4"
fsName : "ext4"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "true"
11:55:50 [6]: void ensureSize(QWidget*, QScrollArea*, Calamares::ViewStep*)
Summary widget is larger than viewport, enlarge by 293 to QSize(834, 821)
11:56:20 [6]: QStringList findEssentialLVs(const QList<PartitionCoreModule::DeviceInfo*>&)
Checking LVM use on 1 devices
11:56:20 [6]: void Calamares::JobThread::finalize()
There are 38 jobs, total weight 33
.. Job 1 "Manage auto-mount settings" +wt 0.0833333 tot.wt 0.0833333
.. Job 2 "Clear all temporary mounts." +wt 0.0833333 tot.wt 0.166667
.. Job 3 "Clear mounts for partitioning operations on /dev/sda" +wt 0.0833333 tot.wt 0.25
.. Job 4 "Create new 1000MiB partition on /dev/sda (Intenso SSD Sata III)." +wt 0.0833333 tot.wt 0.333333
.. Job 5 "Set flags on 1000MiB fat32 partition." +wt 0.0833333 tot.wt 0.416667
.. Job 6 "Create new 17000MiB partition on /dev/sda (Intenso SSD Sata III)." +wt 0.0833333 tot.wt 0.5
.. Job 7 "Set flags on 17000MiB linuxswap partition." +wt 0.0833333 tot.wt 0.583333
.. Job 8 "Create new 70000MiB partition on /dev/sda (Intenso SSD Sata III)." +wt 0.0833333 tot.wt 0.666667
.. Job 9 "Set flags on 70000MiB ext4 partition." +wt 0.0833333 tot.wt 0.75
.. Job 10 "Create new 95327MiB partition on /dev/sda (Intenso SSD Sata III)." +wt 0.0833333 tot.wt 0.833333
.. Job 11 "Set partition information" +wt 0.0833333 tot.wt 0.916667
.. Job 12 "Manage auto-mount settings" +wt 0.0833333 tot.wt 1
.. Job 13 "mount" +wt 1 tot.wt 2
.. Job 14 "unpackfs" +wt 12 tot.wt 14
.. Job 15 "networkcfg" +wt 1 tot.wt 15
.. Job 16 "Generate machine-id." +wt 1 tot.wt 16
.. Job 17 "fstab" +wt 1 tot.wt 17
.. Job 18 "Set timezone to America/New_York" +wt 1 tot.wt 18
.. Job 19 "Set keyboard model to pc105, layout to de-" +wt 1 tot.wt 19
.. Job 20 "localecfg" +wt 1 tot.wt 20
.. Job 21 "Configuring encrypted swap." +wt 1 tot.wt 21
.. Job 22 "Configuring LUKS key file." +wt 1 tot.wt 22
.. Job 23 "initcpiocfg" +wt 1 tot.wt 23
.. Job 24 "Creating initramfs with mkinitcpio." +wt 1 tot.wt 24
.. Job 25 "Configure <pre>sudo</pre> users." +wt 0.166667 tot.wt 24.1667
.. Job 26 "Preparing groups." +wt 0.166667 tot.wt 24.3333
.. Job 27 "Create user as" +wt 0.166667 tot.wt 24.5
.. Job 28 "Set password for user as" +wt 0.166667 tot.wt 24.6667
.. Job 29 "Set password for user root" +wt 0.166667 tot.wt 24.8333
.. Job 30 "Set hostname as-gp722qe" +wt 0.166667 tot.wt 25
.. Job 31 "displaymanager" +wt 1 tot.wt 26
.. Job 32 "mhwdcfg" +wt 1 tot.wt 27
.. Job 33 "hwclock" +wt 1 tot.wt 28
.. Job 34 "services" +wt 1 tot.wt 29
.. Job 35 "grubcfg" +wt 1 tot.wt 30
.. Job 36 "bootloader" +wt 1 tot.wt 31
.. Job 37 "postcfg" +wt 1 tot.wt 32
.. Job 38 "Unmount file systems." +wt 1 tot.wt 33
11:56:20 [6]: virtual void Calamares::JobThread::run()
Starting job "Manage auto-mount settings" ( 1 / 38 )
11:56:20 [6]: virtual Calamares::JobResult AutoMountManagementJob::exec()
Set automount to disable
11:56:20 [6]: void CalamaresUtils::Partition::querySolidAutoMount(QDBusConnection&, AutoMountInfo&)
Solid not available: "Not connected to D-Bus server"
11:56:20 [6]: virtual void Calamares::JobThread::run()
Starting job "Clear all temporary mounts." ( 2 / 38 )
11:56:20 [6]: virtual void Calamares::JobThread::run()
Starting job "Clear mounts for partitioning operations on /dev/sda" ( 3 / 38 )
11:56:20 [6]: QStringList getPartitionsForDevice(const QString&)
Reading from "/proc/partitions" looking for "sda"
11:56:20 [6]: virtual Calamares::JobResult ClearMountsJob::exec()
ClearMountsJob finished. Here's what was done:
.. Running ("udevadm", "settle")
.. Running ("sync")
11:56:20 [6]: virtual void Calamares::JobThread::run()
Starting job "Create new 1000MiB partition on /dev/sda (Intenso SSD Sata III)." ( 4 / 38 )
11:56:23 [6]: virtual void Calamares::JobThread::run()
Starting job "Set flags on partition /dev/sda5." ( 5 / 38 )
11:56:23 [6]: virtual Calamares::JobResult SetPartFlagsJob::exec()
Setting flags on "/dev/sda" partition "/dev/sda5"
"boot"
11:56:25 [6]: virtual void Calamares::JobThread::run()
Starting job "Create new 17000MiB partition on /dev/sda (Intenso SSD Sata III)." ( 6 / 38 )
11:56:28 [6]: virtual void Calamares::JobThread::run()
Starting job "Set flags on partition /dev/sda6." ( 7 / 38 )
11:56:28 [6]: virtual Calamares::JobResult SetPartFlagsJob::exec()
Setting flags on "/dev/sda" partition "/dev/sda6"
"swap"
11:56:29 [6]: virtual void Calamares::JobThread::run()
Starting job "Create new 70000MiB partition on /dev/sda (Intenso SSD Sata III)." ( 8 / 38 )
11:56:37 [6]: virtual void Calamares::JobThread::run()
Starting job "Set flags on partition /dev/sda7." ( 9 / 38 )
11:56:37 [6]: virtual Calamares::JobResult SetPartFlagsJob::exec()
Setting flags on "/dev/sda" partition "/dev/sda7"
"boot"
11:56:38 [6]: virtual void Calamares::JobThread::run()
Starting job "Create new 95327MiB partition on /dev/sda (Intenso SSD Sata III)." ( 10 / 38 )
11:56:45 [6]: virtual void Calamares::JobThread::run()
Starting job "Set partition information" ( 11 / 38 )
11:56:45 [6]: QVariantList FillGlobalStorageJob::createPartitionList() const
Building partition information map
.. partitions on "/dev/sda"
.. mapping for "/dev/sda1" "/dev/sda1"
partlabel : "EFI system partition"
partition-uuid (partuuid) : "PartUUID$33f5f848"
parttype : "C12A7328-F81F-11D2-BA4B-00A0C93EC93B"
partattrs : "9223372036854775808"
mountPoint: : ""
fs: : "fat32"
fsName : "fat32"
filesystem-uuid (uuid) : "FSUUID$c7a1c9b6"
claimed : "false"
.. mapping for "/dev/sda2" "/dev/sda2"
partlabel : "Microsoft reserved partition"
partition-uuid (partuuid) : "PartUUID$2625420d"
parttype : "E3C9E316-0B5C-4DB8-817D-F92DF00215AE"
partattrs : "9223372036854775808"
mountPoint: : ""
fs: : "unknown"
fsName : "unknown"
filesystem-uuid (uuid) : "FSUUID$681d0049"
claimed : "false"
.. mapping for "/dev/sda3" "/dev/sda3"
partlabel : "Basic data partition"
partition-uuid (partuuid) : "PartUUID$866fb330"
parttype : "EBD0A0A2-B9E5-4433-87C0-68B6B72699C7"
partattrs : "0"
mountPoint: : ""
fs: : "ntfs"
fsName : "ntfs"
filesystem-uuid (uuid) : "FSUUID$168f6846"
claimed : "false"
.. mapping for "/dev/sda4" "/dev/sda4"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$5e62f692"
parttype : "DE94BBA4-06D1-4D40-A16A-BFD50179D6AC"
partattrs : "9223372036854775809"
mountPoint: : ""
fs: : "ntfs"
fsName : "ntfs"
filesystem-uuid (uuid) : "FSUUID$5b1f522"
claimed : "false"
.. mapping for "/dev/sda5" "/dev/sda5"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$7b59fd07"
parttype : ""
partattrs : "0"
mountPoint: : "/boot/efi"
fs: : "fat32"
fsName : "fat32"
filesystem-uuid (uuid) : "FSUUID$222591c1"
claimed : "true"
.. mapping for "/dev/sda6" "/dev/sda6"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$3b4444cf"
parttype : ""
partattrs : "0"
mountPoint: : ""
fs: : "linuxswap"
fsName : "linuxswap"
filesystem-uuid (uuid) : "FSUUID$3873af71"
claimed : "true"
.. mapping for "/dev/sda7" "/dev/sda7"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$a51c248c"
parttype : ""
partattrs : "0"
mountPoint: : "/"
fs: : "ext4"
fsName : "ext4"
filesystem-uuid (uuid) : "FSUUID$480716f4"
claimed : "true"
.. mapping for "/dev/sda8" "/dev/sda8"
partlabel : ""
partition-uuid (partuuid) : "PartUUID$37f16c95"
parttype : ""
partattrs : "0"
mountPoint: : "/home"
fs: : "ext4"
fsName : "ext4"
filesystem-uuid (uuid) : "FSUUID$a483141a"
claimed : "true"
11:56:45 [6]: virtual Calamares::JobResult FillGlobalStorageJob::exec()
Saving partition information map to GlobalStorage["partitions"]
11:56:45 [6]: virtual Calamares::JobResult FillGlobalStorageJob::exec()
FillGlobalStorageJob writing empty bootLoader value
11:56:45 [6]: virtual void Calamares::JobThread::run()
Starting job "Manage auto-mount settings" ( 12 / 38 )
11:56:45 [6]: virtual Calamares::JobResult AutoMountManagementJob::exec()
Restore automount settings
11:56:45 [6]: virtual void Calamares::JobThread::run()
Starting job "mount" ( 13 / 38 )
11:56:45 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
Job file "/usr/lib/calamares/modules/mount/main.py"
[PYTHON JOB]: Found gettext "en_US" in "/usr/share/locale/en_US"
.. Job description from pretty_name "mount" = "Mounting partitions."
chcon: failed to get security context of '/': Operation not supported
.. Running ("mount", "-t", "ext4", "/dev/sda7", "/tmp/calamares-root-wvnm1nfa/")
.. Running ("udevadm", "settle")
.. Running ("sync")
chcon: failed to get security context of '/boot/efi': Operation not supported
.. Running ("mount", "-t", "vfat", "/dev/sda5", "/tmp/calamares-root-wvnm1nfa/boot/efi")
.. Running ("udevadm", "settle")
.. Running ("sync")
chcon: failed to get security context of '/dev': Operation not supported
.. Running ("mount", "-o", "bind", "/dev", "/tmp/calamares-root-wvnm1nfa/dev")
.. Running ("udevadm", "settle")
.. Running ("sync")
chcon: failed to get security context of '/home': Operation not supported
.. Running ("mount", "-t", "ext4", "/dev/sda8", "/tmp/calamares-root-wvnm1nfa/home")
.. Running ("udevadm", "settle")
.. Running ("sync")
chcon: failed to get security context of '/proc': Operation not supported
.. Running ("mount", "-t", "proc", "proc", "/tmp/calamares-root-wvnm1nfa/proc")
.. Running ("udevadm", "settle")
.. Running ("sync")
chcon: failed to get security context of '/run': Operation not supported
.. Running ("mount", "-t", "tmpfs", "tmpfs", "/tmp/calamares-root-wvnm1nfa/run")
.. Running ("udevadm", "settle")
.. Running ("sync")
chcon: failed to get security context of '/run/udev': Operation not supported
.. Running ("mount", "-o", "bind", "/run/udev", "/tmp/calamares-root-wvnm1nfa/run/udev")
.. Running ("udevadm", "settle")
.. Running ("sync")
chcon: failed to get security context of '/sys': Operation not supported
.. Running ("mount", "-t", "sysfs", "sys", "/tmp/calamares-root-wvnm1nfa/sys")
.. Running ("udevadm", "settle")
.. Running ("sync")
chcon: failed to get security context of '/sys/firmware/efi/efivars': Operation not supported
.. Running ("mount", "-t", "efivarfs", "efivarfs", "/tmp/calamares-root-wvnm1nfa/sys/firmware/efi/efivars")
.. Running ("udevadm", "settle")
.. Running ("sync")
11:56:45 [6]: virtual void Calamares::JobThread::run()
Starting job "unpackfs" ( 14 / 38 )
11:56:45 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
Job file "/usr/lib/calamares/modules/unpackfs/main.py"
[PYTHON JOB]: Found gettext "en_US" in "/usr/share/locale/en_US"
.. Job description from pretty_name "unpackfs" = "Filling up filesystems."
.. Running ("mount", "-t", "squashfs", "-o", "loop", "/run/miso/bootmnt/manjaro/x86_64/rootfs.sfs", "/tmp/tmpxzg2smju/rootfs")
.. Finished. Exit code: 0 output:
mount: /tmp/tmpxzg2smju/rootfs: WARNING: source write-protected, mounted read-only.
.. Running ("udevadm", "settle")
.. Running ("sync")
.. Running ("unsquashfs", "-l", "/run/miso/bootmnt/manjaro/x86_64/rootfs.sfs")
.. Running ("rsync", "-aHAXr", "--filter=-x trusted.overlay.*", "--exclude", "/proc/", "--exclude", "/sys/", "--exclude", "/dev/", "--exclude", "/run/", "--exclude", "/run/udev/", "--exclude", "/sys/firmware/efi/efivars/", "--progress", "/tmp/tmpxzg2smju/rootfs/", "/tmp/calamares-root-wvnm1nfa")
.. Running ("mount", "-t", "squashfs", "-o", "loop", "/run/miso/bootmnt/manjaro/x86_64/desktopfs.sfs", "/tmp/tmpxzg2smju/desktopfs")
.. Finished. Exit code: 0 output:
mount: /tmp/tmpxzg2smju/desktopfs: WARNING: source write-protected, mounted read-only.
.. Running ("udevadm", "settle")
.. Running ("sync")
.. Running ("unsquashfs", "-l", "/run/miso/bootmnt/manjaro/x86_64/desktopfs.sfs")
.. Running ("rsync", "-aHAXr", "--filter=-x trusted.overlay.*", "--exclude", "/proc/", "--exclude", "/sys/", "--exclude", "/dev/", "--exclude", "/run/", "--exclude", "/run/udev/", "--exclude", "/sys/firmware/efi/efivars/", "--progress", "/tmp/tmpxzg2smju/desktopfs/", "/tmp/calamares-root-wvnm1nfa")
11:58:51 [6]: virtual void Calamares::JobThread::run()
Starting job "networkcfg" ( 15 / 38 )
11:58:51 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
Job file "/usr/lib/calamares/modules/networkcfg/main.py"
[PYTHON JOB]: Found gettext "en_US" in "/usr/share/locale/en_US"
.. Job description from pretty_name "networkcfg" = "Saving network configuration."
11:58:51 [6]: virtual void Calamares::JobThread::run()
Starting job "Generate machine-id." ( 16 / 38 )
.. Running ("systemd-machine-id-setup")
.. Finished. Exit code: 0 output:
Initializing machine ID from random generator.
.. Running ("ln", "-sf", "/etc/machine-id", "/var/lib/dbus/machine-id")
11:58:52 [6]: virtual void Calamares::JobThread::run()
Starting job "fstab" ( 17 / 38 )
11:58:52 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
Job file "/usr/lib/calamares/modules/fstab/main.py"
[PYTHON JOB]: Found gettext "en_US" in "/usr/share/locale/en_US"
.. Job description from pretty_name "fstab" = "Writing fstab."
11:58:52 [6]: virtual void Calamares::JobThread::run()
Starting job "Set timezone to America/New_York" ( 18 / 38 )
.. Running ("rm", "-f", "/etc/localtime")
.. Running ("ln", "-s", "/usr/share/zoneinfo/America/New_York", "/etc/localtime")
11:58:52 [6]: virtual void Calamares::JobThread::run()
Starting job "Set keyboard model to pc105, layout to de-" ( 19 / 38 )
11:58:52 [6]: virtual Calamares::JobResult SetKeyboardLayoutJob::exec()
Executing SetKeyboardLayoutJob
11:58:52 [6]: bool SetKeyboardLayoutJob::writeVConsoleData(const QString&, const QString&) const
Writing vconsole data to "/tmp/calamares-root-wvnm1nfa/etc/vconsole.conf"
11:58:52 [6]: QString SetKeyboardLayoutJob::findConvertedKeymap(const QString&) const
Looking for converted keymap in "/tmp/calamares-root-wvnm1nfa/lib/kbd/keymaps/xkb"
11:58:52 [6]: QString findLegacyKeymap(const QString&, const QString&, const QString&)
Looking for legacy keymap "de" "pc105" "" in QRC
.. Found legacy keymap "de" with score 12
.. Found legacy keymap "de-latin1" with score 12
.. Written KEYMAP= "de" to vconsole.conf 0
11:58:52 [6]: bool SetKeyboardLayoutJob::writeX11Data(const QString&) const
Writing X11 configuration to "/tmp/calamares-root-wvnm1nfa/etc/X11/xorg.conf.d/00-keyboard.conf"
.. Written XkbLayout "de" ; XkbModel "pc105" ; XkbVariant "" to X.org file "/tmp/calamares-root-wvnm1nfa/etc/X11/xorg.conf.d/00-keyboard.conf" 0
11:58:52 [6]: bool SetKeyboardLayoutJob::writeDefaultKeyboardData(const QString&) const
Writing default keyboard data to "/tmp/calamares-root-wvnm1nfa/etc/default/keyboard"
.. Written XKBMODEL "pc105" ; XKBLAYOUT "de" ; XKBVARIANT "" to /etc/default/keyboard file "/tmp/calamares-root-wvnm1nfa/etc/default/keyboard" 0
11:58:52 [6]: virtual void Calamares::JobThread::run()
Starting job "localecfg" ( 20 / 38 )
11:58:52 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
Job file "/usr/lib/calamares/modules/localecfg/main.py"
[PYTHON JOB]: Found gettext "en_US" in "/usr/share/locale/en_US"
.. Job description from pretty_name "localecfg" = "Configuring locales."
.. Running ("locale-gen")
.. Finished. Exit code: 0 output:
Generating locales...
en_US.UTF-8... done
Generation complete.
[PYTHON JOB]: "/tmp/calamares-root-wvnm1nfa/etc/locale.gen done"
[PYTHON JOB]: "/tmp/calamares-root-wvnm1nfa/etc/locale.conf done"
[PYTHON JOB]: "/tmp/calamares-root-wvnm1nfa/etc/default done"
11:58:53 [6]: virtual void Calamares::JobThread::run()
Starting job "Configuring encrypted swap." ( 21 / 38 )
11:58:53 [6]: void write_openswap_conf(const QString&, QStringList&, const LOSHInfo&)
Will not write an invalid configuration to "/etc/openswap.conf"
11:58:53 [6]: virtual void Calamares::JobThread::run()
Starting job "Configuring LUKS key file." ( 22 / 38 )
11:58:53 [6]: virtual Calamares::JobResult LuksBootKeyFileJob::exec()
There are 0 LUKS partitions
.. Nothing to do for LUKS.
11:58:53 [6]: virtual void Calamares::JobThread::run()
Starting job "initcpiocfg" ( 23 / 38 )
11:58:53 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
Job file "/usr/lib/calamares/modules/initcpiocfg/main.py"
[PYTHON JOB]: Found gettext "en_US" in "/usr/share/locale/en_US"
.. Job description from pretty_name "initcpiocfg" = "Configuring mkinitcpio."
.. Running ("sh", "-c", "which plymouth")
.. Finished. Exit code: 0 output:
/usr/bin/plymouth
11:58:53 [6]: virtual void Calamares::JobThread::run()
Starting job "Creating initramfs with mkinitcpio." ( 24 / 38 )
11:58:53 [6]: virtual Calamares::JobResult InitcpioJob::exec()
Updating initramfs with kernel "linux66"
.. Running ("mkinitcpio", "-p", "linux66")
.. Finished. Exit code: 0 output:
==> Building image from preset: /etc/mkinitcpio.d/linux66.preset: 'default'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-6.6-x86_64 -g /boot/initramfs-6.6-x86_64.img --microcode /boot/amd-ucode.img --microcode /boot/intel-ucode.img
==> Starting build: '6.6.10-1-MANJARO'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [kms]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [plymouth]
-> Running build hook: [resume]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: '/boot/initramfs-6.6-x86_64.img'
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux66.preset: 'fallback'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-6.6-x86_64 -g /boot/initramfs-6.6-x86_64-fallback.img -S autodetect --microcode /boot/amd-ucode.img --microcode /boot/intel-ucode.img
==> Starting build: '6.6.10-1-MANJARO'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [kms]
==> WARNING: Possibly missing firmware for module: 'ast'
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: 'aic94xx'
==> WARNING: Possibly missing firmware for module: 'qed'
==> WARNING: Possibly missing firmware for module: 'qla2xxx'
==> WARNING: Possibly missing firmware for module: 'qla1280'
==> WARNING: Possibly missing firmware for module: 'bfa'
==> WARNING: Possibly missing firmware for module: 'wd719x'
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [plymouth]
-> Running build hook: [resume]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: '/boot/initramfs-6.6-x86_64-fallback.img'
==> Image generation successful
11:59:32 [6]: virtual void Calamares::JobThread::run()
Starting job "Configure <pre>sudo</pre> users." ( 25 / 38 )
11:59:32 [6]: virtual void Calamares::JobThread::run()
Starting job "Preparing groups." ( 26 / 38 )
11:59:32 [6]: virtual void Calamares::JobThread::run()
Starting job "Create user as" ( 27 / 38 )
11:59:32 [6]: virtual Calamares::JobResult CreateUserJob::exec()
[CREATEUSER]: creating user
.. Running ("useradd", "-m", "-U", "-s", "/bin/bash", "-c", "AS", "as")
.. Running "usermod" "-aG" "lp,network,power,sys,wheel" "as"
.. Running ("chown", "-R", "as:as", "/home/as")
11:59:32 [6]: virtual void Calamares::JobThread::run()
Starting job "Set password for user as" ( 28 / 38 )
.. Running "usermod" "-p" <password> "as"
11:59:32 [6]: virtual void Calamares::JobThread::run()
Starting job "Set password for user root" ( 29 / 38 )
.. Running "usermod" "-p" <password> "root"
11:59:32 [6]: virtual void Calamares::JobThread::run()
Starting job "Set hostname as-gp722qe" ( 30 / 38 )
11:59:32 [6]: virtual void Calamares::JobThread::run()
Starting job "displaymanager" ( 31 / 38 )
11:59:32 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
Job file "/usr/lib/calamares/modules/displaymanager/main.py"
[PYTHON JOB]: Found gettext "en_US" in "/usr/share/locale/en_US"
.. Job description from __doc__ "displaymanager" = "Configure display managers."
[PYTHON JOB]: "gdm selected but not installed"
[PYTHON JOB]: "mdm selected but not installed"
[PYTHON JOB]: "sddm selected but not installed"
[PYTHON JOB]: "lxdm selected but not installed"
[PYTHON JOB]: "slim selected but not installed"
[PYTHON JOB]: "Using rootMountPoint '/tmp/calamares-root-wvnm1nfa'"
[PYTHON JOB]: ".. selected DE xfce"
11:59:32 [2]: boost::python::api::object CalamaresPython::GlobalStoragePythonWrapper::value(const std::string&) const
WARNING: Unknown GS key autoLoginUser
[PYTHON JOB]: "Unsetting autologin."
[PYTHON JOB]: "found greeter lightdm-gtk-greeter"
[PYTHON JOB]: "lightdm-gtk-greeter configured as greeter."
11:59:32 [6]: virtual void Calamares::JobThread::run()
Starting job "mhwdcfg" ( 32 / 38 )
11:59:32 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
Job file "/usr/lib/calamares/modules/mhwdcfg/main.py"
.. Job description from __doc__ "mhwdcfg" = "Configure the hardware"
.. Running ("mhwd", "-a", "pci", "free", "0200", "--pmconfig", "/opt/mhwd/pacman-mhwd.conf")
.. Finished. Exit code: 0 output:
Warning: config '/var/lib/mhwd/db/pci/network_drivers/r8168/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/network_drivers/rt3562sta/MHWDCONFIG' is invalid!
Warning: No config found for device: 0000:03:00.0 (0200:8086:08b3) Network controller Intel Corporation Wireless 3160
Warning: No config found for device: 0000:04:00.0 (0200:1969:e091) Network controller Qualcomm Atheros Killer E220x Gigabit Ethernet Controller
.. Running ("mhwd", "-a", "pci", "free", "0280", "--pmconfig", "/opt/mhwd/pacman-mhwd.conf")
.. Finished. Exit code: 0 output:
Warning: config '/var/lib/mhwd/db/pci/network_drivers/r8168/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/network_drivers/rt3562sta/MHWDCONFIG' is invalid!
Warning: No device of class 0280 found!
.. Running ("mhwd", "-a", "pci", "free", "0300", "--pmconfig", "/opt/mhwd/pacman-mhwd.conf")
.. Finished. Exit code: 0 output:
Warning: config '/var/lib/mhwd/db/pci/network_drivers/r8168/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/network_drivers/rt3562sta/MHWDCONFIG' is invalid!
> Using config 'video-linux' for device: 0000:00:02.0 (0300:8086:1612) Display controller Intel Corporation HD Graphics 5600
> Installing video-linux...
warning: database file for 'core' does not exist (use '-Sy' to download)
warning: database file for 'extra' does not exist (use '-Sy' to download)
warning: database file for 'multilib' does not exist (use '-Sy' to download)
Sourcing /etc/mhwd-x86_64.conf
Has lib32 support: true
Sourcing /var/lib/mhwd/db/pci/graphic_drivers/video-linux/MHWDCONFIG
Processing classid: 0300
Sourcing /var/lib/mhwd/scripts/include/0300
Processing classid: 0380
Processing classid: 0302
:: Synchronizing package databases...
mhwd downloading...
warning: libva-mesa-driver-1:23.3.3-1 is up to date -- skipping
warning: libva-vdpau-driver-0.7.4-6 is up to date -- skipping
warning: lib32-libva-vdpau-driver-0.7.4-7 is up to date -- skipping
resolving dependencies...
looking for conflicting packages...
Packages (18) lib32-libcap-2.69-1 lib32-libgcrypt-1.10.3-1 lib32-libgpg-error-1.47-1 lib32-libtirpc-1.3.4-1 lib32-pam-1.5.3-1 lib32-systemd-255.2-1 lib32-xcb-util-keysyms-0.4.1-1 libxvmc-1.0.13-2 lib32-mesa-vdpau-1:23.3.3-1 lib32-vulkan-intel-1:23.3.3-1 lib32-vulkan-radeon-1:23.3.3-1 mesa-vdpau-1:23.3.3-1 vulkan-intel-1:23.3.3-1 vulkan-radeon-1:23.3.3-1 xf86-video-amdgpu-23.0.0-1 xf86-video-ati-1:22.0.0-1 xf86-video-intel-1:2.99.917+923+gb74b67f0-1 xf86-video-nouveau-1.0.17-2
Total Download Size: 32.13 MiB
Total Installed Size: 115.16 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages...
vulkan-intel-1:23.3.3-1-x86_64 downloading...
lib32-vulkan-intel-1:23.3.3-1-x86_64 downloading...
lib32-mesa-vdpau-1:23.3.3-1-x86_64 downloading...
mesa-vdpau-1:23.3.3-1-x86_64 downloading...
lib32-vulkan-radeon-1:23.3.3-1-x86_64 downloading...
vulkan-radeon-1:23.3.3-1-x86_64 downloading...
lib32-systemd-255.2-1-x86_64 downloading...
xf86-video-intel-1:2.99.917+923+gb74b67f0-1-x86_64 downloading...
lib32-libgcrypt-1.10.3-1-x86_64 downloading...
lib32-pam-1.5.3-1-x86_64 downloading...
xf86-video-ati-1:22.0.0-1-x86_64 downloading...
xf86-video-nouveau-1.0.17-2-x86_64 downloading...
lib32-libtirpc-1.3.4-1-x86_64 downloading...
xf86-video-amdgpu-23.0.0-1-x86_64 downloading...
lib32-libgpg-error-1.47-1-x86_64 downloading...
lib32-libcap-2.69-1-x86_64 downloading...
libxvmc-1.0.13-2-x86_64 downloading...
lib32-xcb-util-keysyms-0.4.1-1-x86_64 downloading...
checking keyring...
checking package integrity...
loading package files...
checking for file conflicts...
checking available disk space...
:: Processing package changes...
installing xf86-video-ati...
installing xf86-video-amdgpu...
installing libxvmc...
installing xf86-video-intel...
>>> This driver now uses DRI3 as the default Direct Rendering
Infrastructure. You can try falling back to DRI2 if you run
into trouble. To do so, save a file with the following
content as /etc/X11/xorg.conf.d/20-intel.conf :
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "DRI" "2" # DRI3 is now default
#Option "AccelMethod" "sna" # default
#Option "AccelMethod" "uxa" # fallback
EndSection
Optional dependencies for xf86-video-intel
libxrandr: for intel-virtual-output [installed]
libxinerama: for intel-virtual-output [installed]
libxcursor: for intel-virtual-output [installed]
libxtst: for intel-virtual-output [installed]
libxss: for intel-virtual-output [installed]
installing xf86-video-nouveau...
installing vulkan-intel...
Optional dependencies for vulkan-intel
vulkan-mesa-layers: additional vulkan layers
installing vulkan-radeon...
Optional dependencies for vulkan-radeon
vulkan-mesa-layers: additional vulkan layers
installing mesa-vdpau...
installing lib32-libtirpc...
installing lib32-pam...
installing lib32-libcap...
installing lib32-libgpg-error...
installing lib32-libgcrypt...
installing lib32-systemd...
installing lib32-xcb-util-keysyms...
installing lib32-vulkan-intel...
Optional dependencies for lib32-vulkan-intel
lib32-vulkan-mesa-layers: additional vulkan layers
installing lib32-vulkan-radeon...
Optional dependencies for lib32-vulkan-radeon
lib32-vulkan-mesa-layers: additional vulkan layers
installing lib32-mesa-vdpau...
:: Running post-transaction hooks...
(1/1) Arming ConditionNeedsUpdate...
xf86-video-ati: install reason has been set to 'explicitly installed'
xf86-video-amdgpu: install reason has been set to 'explicitly installed'
xf86-video-intel: install reason has been set to 'explicitly installed'
xf86-video-nouveau: install reason has been set to 'explicitly installed'
vulkan-intel: install reason has been set to 'explicitly installed'
vulkan-radeon: install reason has been set to 'explicitly installed'
libva-mesa-driver: install reason has been set to 'explicitly installed'
libva-vdpau-driver: install reason has been set to 'explicitly installed'
mesa-vdpau: install reason has been set to 'explicitly installed'
lib32-vulkan-intel: install reason has been set to 'explicitly installed'
lib32-vulkan-radeon: install reason has been set to 'explicitly installed'
lib32-libva-vdpau-driver: install reason has been set to 'explicitly installed'
lib32-mesa-vdpau: install reason has been set to 'explicitly installed'
> Successfully installed video-linux
.. Running ("mhwd", "-a", "pci", "free", "0302", "--pmconfig", "/opt/mhwd/pacman-mhwd.conf")
.. Finished. Exit code: 0 output:
Warning: config '/var/lib/mhwd/db/pci/network_drivers/r8168/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/network_drivers/rt3562sta/MHWDCONFIG' is invalid!
> Skipping already installed config 'video-linux' for device: 0000:01:00.0 (0302:10de:139a) Display controller nVidia Corporation GM107M [GeForce GTX 950M]
.. Running ("mhwd", "-a", "pci", "free", "0380", "--pmconfig", "/opt/mhwd/pacman-mhwd.conf")
.. Finished. Exit code: 0 output:
Warning: config '/var/lib/mhwd/db/pci/network_drivers/r8168/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/network_drivers/rt3562sta/MHWDCONFIG' is invalid!
Warning: No device of class 0380 found!
11:59:42 [6]: virtual void Calamares::JobThread::run()
Starting job "hwclock" ( 33 / 38 )
11:59:42 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
Job file "/usr/lib/calamares/modules/hwclock/main.py"
[PYTHON JOB]: Found gettext "en_US" in "/usr/share/locale/en_US"
.. Job description from pretty_name "hwclock" = "Setting hardware clock."
.. Running ("hwclock", "--systohc", "--utc")
[PYTHON JOB]: "Hwclock set using RTC method."
11:59:42 [6]: virtual void Calamares::JobThread::run()
Starting job "services" ( 34 / 38 )
11:59:42 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
Job file "/usr/lib/calamares/modules/services/main.py"
[PYTHON JOB]: Found gettext "en_US" in "/usr/share/locale/en_US"
.. Job description from pretty_name "services" = "Configure systemd services"
.. Running ("systemctl", "enable", "avahi-daemon.service")
.. Finished. Exit code: 0 output:
Created symlink /etc/systemd/system/dbus-org.freedesktop.Avahi.service -> /usr/lib/systemd/system/avahi-daemon.service.
Created symlink /etc/systemd/system/multi-user.target.wants/avahi-daemon.service -> /usr/lib/systemd/system/avahi-daemon.service.
Created symlink /etc/systemd/system/sockets.target.wants/avahi-daemon.socket -> /usr/lib/systemd/system/avahi-daemon.socket.
.. Running ("systemctl", "enable", "bluetooth.service")
.. Finished. Exit code: 0 output:
Created symlink /etc/systemd/system/dbus-org.bluez.service -> /usr/lib/systemd/system/bluetooth.service.
Created symlink /etc/systemd/system/bluetooth.target.wants/bluetooth.service -> /usr/lib/systemd/system/bluetooth.service.
.. Running ("systemctl", "enable", "cronie.service")
.. Finished. Exit code: 0 output:
Created symlink /etc/systemd/system/multi-user.target.wants/cronie.service -> /usr/lib/systemd/system/cronie.service.
.. Running ("systemctl", "enable", "ModemManager.service")
.. Finished. Exit code: 0 output:
Created symlink /etc/systemd/system/dbus-org.freedesktop.ModemManager1.service -> /usr/lib/systemd/system/ModemManager.service.
Created symlink /etc/systemd/system/multi-user.target.wants/ModemManager.service -> /usr/lib/systemd/system/ModemManager.service.
.. Running ("systemctl", "enable", "NetworkManager.service")
.. Finished. Exit code: 0 output:
Created symlink /etc/systemd/system/multi-user.target.wants/NetworkManager.service -> /usr/lib/systemd/system/NetworkManager.service.
Created symlink /etc/systemd/system/dbus-org.freedesktop.nm-dispatcher.service -> /usr/lib/systemd/system/NetworkManager-dispatcher.service.
Created symlink /etc/systemd/system/network-online.target.wants/NetworkManager-wait-online.service -> /usr/lib/systemd/system/NetworkManager-wait-online.service.
.. Running ("systemctl", "enable", "cups.service")
.. Finished. Exit code: 0 output:
Created symlink /etc/systemd/system/printer.target.wants/cups.service -> /usr/lib/systemd/system/cups.service.
Created symlink /etc/systemd/system/multi-user.target.wants/cups.service -> /usr/lib/systemd/system/cups.service.
Created symlink /etc/systemd/system/sockets.target.wants/cups.socket -> /usr/lib/systemd/system/cups.socket.
Created symlink /etc/systemd/system/multi-user.target.wants/cups.path -> /usr/lib/systemd/system/cups.path.
.. Running ("systemctl", "enable", "haveged.service")
.. Target cmd: ("systemctl", "enable", "haveged.service") Exit code: 1 output:
Failed to enable unit, unit haveged.service does not exist.
WARNING: [PYTHON JOB]: "Cannot enable systemd .service haveged"
WARNING: [PYTHON JOB]: "systemctl enable call in chroot returned error code 1"
.. Running ("systemctl", "enable", "ufw.service")
.. Finished. Exit code: 0 output:
Created symlink /etc/systemd/system/multi-user.target.wants/ufw.service -> /usr/lib/systemd/system/ufw.service.
.. Running ("systemctl", "enable", "apparmor.service")
.. Finished. Exit code: 0 output:
Created symlink /etc/systemd/system/multi-user.target.wants/apparmor.service -> /usr/lib/systemd/system/apparmor.service.
.. Running ("systemctl", "enable", "snapd.apparmor.service")
.. Finished. Exit code: 0 output:
Created symlink /etc/systemd/system/multi-user.target.wants/snapd.apparmor.service -> /usr/lib/systemd/system/snapd.apparmor.service.
.. Running ("systemctl", "enable", "snapd.service")
.. Finished. Exit code: 0 output:
Created symlink /etc/systemd/system/multi-user.target.wants/snapd.service -> /usr/lib/systemd/system/snapd.service.
.. Running ("systemctl", "enable", "lightdm.service")
.. Finished. Exit code: 0 output:
Created symlink /etc/systemd/system/display-manager.service -> /usr/lib/systemd/system/lightdm.service.
.. Running ("systemctl", "enable", "graphical.target")
.. Finished. Exit code: 0 output:
The unit files have no installation config (WantedBy=, RequiredBy=, UpheldBy=,
Also=, or Alias= settings in the [Install] section, and DefaultInstance= for
template units). This means they are not meant to be enabled or disabled using systemctl.
Possible reasons for having these kinds of units are:
* A unit may be statically enabled by being symlinked from another unit's
.wants/, .requires/, or .upholds/ directory.
* A unit's purpose may be to act as a helper for some other unit which has
a requirement dependency on it.
* A unit may be started when needed via activation (socket, path, timer,
D-Bus, udev, scripted systemctl call, ...).
* In case of template units, the unit is meant to be enabled with some
instance name specified.
.. Running ("systemctl", "enable", "fstrim.timer")
.. Finished. Exit code: 0 output:
Created symlink /etc/systemd/system/timers.target.wants/fstrim.timer -> /usr/lib/systemd/system/fstrim.timer.
.. Running ("systemctl", "enable", "pacman-filesdb-refresh.timer")
.. Finished. Exit code: 0 output:
Created symlink /etc/systemd/system/timers.target.wants/pacman-filesdb-refresh.timer -> /usr/lib/systemd/system/pacman-filesdb-refresh.timer.
.. Running ("systemctl", "disable", "pacman-init.service")
.. Target cmd: ("systemctl", "disable", "pacman-init.service") Exit code: 1 output:
Failed to disable unit, unit pacman-init.service does not exist.
WARNING: [PYTHON JOB]: "Cannot disable systemd .service pacman-init"
WARNING: [PYTHON JOB]: "systemctl disable call in chroot returned error code 1"
11:59:42 [6]: virtual void Calamares::JobThread::run()
Starting job "grubcfg" ( 35 / 38 )
11:59:42 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
Job file "/usr/lib/calamares/modules/grubcfg/main.py"
[PYTHON JOB]: Found gettext "en_US" in "/usr/share/locale/en_US"
.. Job description from pretty_name "grubcfg" = "Configure GRUB."
.. Running ("sh", "-c", "which dracut")
.. Target cmd: ("sh", "-c", "which dracut") Exit code: 1 output:
which: no dracut in (/home/manjaro/.local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl:/var/lib/snapd/snap/bin)
.. Running ("sh", "-c", "which plymouth")
.. Finished. Exit code: 0 output:
/usr/bin/plymouth
11:59:42 [6]: virtual void Calamares::JobThread::run()
Starting job "bootloader" ( 36 / 38 )
11:59:42 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
Job file "/usr/lib/calamares/modules/bootloader/main.py"
[PYTHON JOB]: Found gettext "en_US" in "/usr/share/locale/en_US"
.. Job description from pretty_name "bootloader" = "Install bootloader."
[PYTHON JOB]: "Bootloader: grub (efi)"
.. Running ("grub-install", "--target=x86_64-efi", "--efi-directory=/boot/efi", "--bootloader-id=Manjaro", "--force")
.. Target cmd: ("grub-install", "--target=x86_64-efi", "--efi-directory=/boot/efi", "--bootloader-id=Manjaro", "--force") Exit code: 1 output:
Installing for x86_64-efi platform.
Could not prepare Boot variable: Input/output error
grub-install: error: efibootmgr failed to register the boot entry: Input/output error.
WARNING: [PYTHON JOB]: "Command 'grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=Manjaro --force' returned non-zero exit status 1."
[PYTHON JOB]: "stdout:Installing for x86_64-efi platform.\nCould not prepare Boot variable: Input/output error\ngrub-install: error: efibootmgr failed to register the boot entry: Input/output error."
[PYTHON JOB]: "stderr:None"
11:59:45 [6]: virtual void Calamares::JobThread::run()
Skipping non-emergency job "postcfg"
.. Skipping non-emergency job "Unmount file systems."
11:59:45 [1]: void Calamares::ViewManager::onInstallationFailed(const QString&, const QString&)
ERROR: Installation failed: "Bootloader installation error"
.. - message: "Bootloader installation error"
.. - details: The bootloader could not be installed. The installation command <pre>grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=Manjaro --force</pre> returned error code 1.
11:59:45 [6]: void Calamares::ViewManager::onInstallationFailed(const QString&, const QString&)
Calamares will quit when the dialog closes.
11:59:45 [6]: void Config::doNotify(bool, bool)
Notification not sent; completion: failed
I hope those information are good enough. If you miss something, please let me know. I’ll add it as fast as I can.
Thank you really much!
