Thanks for your reply, here’s the requested output:
$ echo -n /sys/class/drm/card*-* | xargs -d ' ' -I {} -exec bash -c 'edid-decode {}/edid ; true'
xargs: warning: the -E option has no effect if -0 or -d is used.
/sys/class/drm/card*-*/edid: No such file or directory
Removing the config files did not make a difference either…
Do you have two video cards? Can you attach the output of inxi -Gazy
and xrandr --listproviders
?
xrandr
still only shows 60 Hz?
Post the output of head -n999 /etc/X11/xorg.conf.d/* /etc/X11/xorg.conf
as well.
Yes, xrandr
showed the same set of resolutions and refresh rates.
inxi -Gazy
:
Graphics:
Device-1: NVIDIA GP106 [GeForce GTX 1060 6GB] driver: nvidia v: 460.73.01
alternate: nouveau,nvidia_drm bus-ID: 20:00.0 chip-ID: 10de:1c03
class-ID: 0300
Display: x11 server: X.Org 1.20.11 compositor: kwin_x11 driver:
loaded: nvidia display-ID: :0 screens: 1
Screen-1: 0 s-res: 4480x1440 s-dpi: 108 s-size: 1054x342mm (41.5x13.5")
s-diag: 1108mm (43.6")
Monitor-1: DVI-D-0 res: 2560x1440 hz: 60 dpi: 109
size: 597x336mm (23.5x13.2") diag: 685mm (27")
Monitor-2: DP-2 res: 1920x1080 hz: 60 dpi: 102 size: 476x268mm (18.7x10.6")
diag: 546mm (21.5")
OpenGL: renderer: GeForce GTX 1060 6GB/PCIe/SSE2 v: 4.6.0 NVIDIA 460.73.01
direct render: Yes
xrandr --listproviders
:
Providers: number : 1
Provider 0: id: 0x1b8 cap: 0x1, Source Output crtcs: 4 outputs: 8 associated providers: 0 name:NVIDIA-0
head -n999 /etc/X11/xorg.conf.d/* /etc/X11/xorg.conf
:
==> /etc/X11/xorg.conf.d/90-mhwd.conf <==
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 460.73.01
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "COMPOSITE" "Enable"
EndSection
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
==> /etc/X11/xorg.conf <==
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 460.73.01
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Acer XF270HU"
HorizSync 31.0 - 90.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 1060 6GB"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-0"
Option "metamodes" "DVI-D-0: 2560x1440 +1920+0, DP-2: nvidia-auto-select +0+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
I only have one GPU installed at the moment and no CPU-driven graphic chip.
Have you created the mode with xrandr --newmode
?
Yes, you can see the 2 modes I created in the first post.
Ahh, indeed, I missed them. Is there anything in the Xorg log after you run the addmode command?
No, nothing in the logs. Today I tested everything on 2 different live systems (Ubuntu, Manjaro) and the open source drivers were in both cases capable of doing 144hz while the proprietary nvidia ones weren’t. Maybe I should try another nvidia driver version; open source drivers aren’t an option because of their performance deficits.
pobrn
7 May 2021 19:34
10
My guess is that this may have something to do with the nvidia Xorg video driver. It could be confirmed, but not very easily. Can you post the output of lsmod | grep nvidia
?
Here you go:
$ lsmod | grep nvidia
nvidia_drm 69632 5
nvidia_modeset 1232896 16 nvidia_drm
drm_kms_helper 278528 1 nvidia_drm
drm 569344 8 drm_kms_helper,nvidia_drm
nvidia 34172928 1003 nvidia_modeset
These are the two modelines I’m testing with by the way:
Modeline "2560x1440_144.0" 580.080 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync
Modeline "1920x1080_144.0" 335.770 1920 1968 2000 2080 1080 1083 1088 1121 +hsync -vsync
pobrn
7 May 2021 19:37
12
And none of the work, I assume?
Can you run sudo systool -vm nvidia_drm | grep modeset
and post the output?
And none of the work, I assume?
No, both resulting in the same error.
$ sudo systool -vm nvidia_drm | grep modeset
modeset = "N"
pobrn
7 May 2021 19:50
14
Please try the following:
sudo systemctl isolate multi-user
sudo rmmod nvidia_drm
sudo rmmod nvidia_modeset
sudo modprobe nvidia_modeset
sudo modprobe nvidia_drm modeset=1
sudo systemctl isolate graphical
then run
echo -n /sys/class/drm/card*-* | xargs -d ' ' -I {} -exec bash -c 'edid-decode {}/edid ; true'
.
Note, that this will close and restart your graphical session, and thus all applications running within.
$ echo -n /sys/class/drm/card*-* | xargs -d ' ' -I {} -exec bash -c 'edid-decode {}/edid ; true'
xargs: warning: the -E option has no effect if -0 or -d is used.
EDID of '/sys/class/drm/card0-DP-1/edid' was empty.
edid-decode (hex):
00 ff ff ff ff ff ff 00 04 69 fd 22 de 82 01 00
25 19 01 03 68 30 1b 78 2a 2a c5 a4 56 4f 9e 28
0f 50 54 b7 ef 00 d1 c0 81 40 81 80 95 00 b3 00
71 4f 81 c0 81 00 02 3a 80 18 71 38 2d 40 58 2c
45 00 dc 0c 11 00 00 1e 00 00 00 ff 00 46 39 4c
4d 54 46 30 39 39 30 33 38 0a 00 00 00 fd 00 32
4b 18 53 11 00 0a 20 20 20 20 20 20 00 00 00 fc
00 41 53 55 53 20 56 53 32 32 38 0a 20 20 00 a5
----------------
Block 0, Base EDID:
EDID Structure Version & Revision: 1.3
Vendor & Product Identification:
Manufacturer: ACI
Model: 8957
Serial Number: 99038
Made in: week 37 of 2015
Basic Display Parameters & Features:
Analog display
Input voltage level: 0.7/0.7 V
Blank level equals black level
Sync: Separate
Maximum image size: 48 cm x 27 cm
Gamma: 2.20
DPMS levels: Off
RGB color display
First detailed timing is the preferred timing
Color Characteristics:
Red : 0.6406, 0.3378
Green: 0.3105, 0.6191
Blue : 0.1591, 0.0585
White: 0.3134, 0.3291
Established Timings I & II:
IBM : 720x400 70.082 Hz 9:5 31.467 kHz 28.320 MHz
DMT 0x04: 640x480 59.940 Hz 4:3 31.469 kHz 25.175 MHz
Apple : 640x480 66.667 Hz 4:3 35.000 kHz 30.240 MHz
DMT 0x06: 640x480 75.000 Hz 4:3 37.500 kHz 31.500 MHz
DMT 0x08: 800x600 56.250 Hz 4:3 35.156 kHz 36.000 MHz
DMT 0x09: 800x600 60.317 Hz 4:3 37.879 kHz 40.000 MHz
DMT 0x0a: 800x600 72.188 Hz 4:3 48.077 kHz 50.000 MHz
DMT 0x0b: 800x600 75.000 Hz 4:3 46.875 kHz 49.500 MHz
Apple : 832x624 74.551 Hz 4:3 49.726 kHz 57.284 MHz
DMT 0x10: 1024x768 60.004 Hz 4:3 48.363 kHz 65.000 MHz
DMT 0x11: 1024x768 70.069 Hz 4:3 56.476 kHz 75.000 MHz
DMT 0x12: 1024x768 75.029 Hz 4:3 60.023 kHz 78.750 MHz
DMT 0x24: 1280x1024 75.025 Hz 5:4 79.976 kHz 135.000 MHz
Standard Timings:
DMT 0x52: 1920x1080 60.000 Hz 16:9 67.500 kHz 148.500 MHz
DMT 0x20: 1280x960 60.000 Hz 4:3 60.000 kHz 108.000 MHz
DMT 0x23: 1280x1024 60.020 Hz 5:4 63.981 kHz 108.000 MHz
DMT 0x2f: 1440x900 59.887 Hz 16:10 55.935 kHz 106.500 MHz
DMT 0x3a: 1680x1050 59.954 Hz 16:10 65.290 kHz 146.250 MHz
DMT 0x15: 1152x864 75.000 Hz 4:3 67.500 kHz 108.000 MHz
DMT 0x55: 1280x720 60.000 Hz 16:9 45.000 kHz 74.250 MHz
DMT 0x1c: 1280x800 59.810 Hz 16:10 49.702 kHz 83.500 MHz
Detailed Timing Descriptors:
DTD 1: 1920x1080 60.000 Hz 16:9 67.500 kHz 148.500 MHz (476 mm x 268 mm)
Hfront 88 Hsync 44 Hback 148 Hpol P
Vfront 4 Vsync 5 Vback 36 Vpol P
Display Product Serial Number: 'F9LMTF099038'
Display Range Limits:
Monitor ranges (GTF): 50-75 Hz V, 24-83 kHz H, max dotclock 170 MHz
Display Product Name: 'ASUS VS228'
Checksum: 0xa5
EDID of '/sys/class/drm/card0-DP-3/edid' was empty.
edid-decode (hex):
00 ff ff ff ff ff ff 00 04 72 49 05 b3 23 81 90
08 1d 01 03 80 3c 22 78 2e 3c 90 ab 54 4c a0 24
0d 50 54 bf ef 80 71 4f 81 40 81 80 81 c0 81 00
95 00 b3 00 d1 c0 56 5e 00 a0 a0 a0 29 50 30 20
35 00 55 50 21 00 00 1a 00 00 00 fd 00 38 4c 1f
5a 19 00 0a 20 20 20 20 20 20 00 00 00 fc 00 58
46 32 37 30 48 55 0a 20 20 20 20 20 00 00 00 ff
00 54 37 38 45 45 30 30 34 38 35 32 31 0a 00 54
----------------
Block 0, Base EDID:
EDID Structure Version & Revision: 1.3
Vendor & Product Identification:
Manufacturer: ACR
Model: 1353
Serial Number: 2424382387
Made in: week 8 of 2019
Basic Display Parameters & Features:
Digital display
Maximum image size: 60 cm x 34 cm
Gamma: 2.20
DPMS levels: Off
RGB color display
Default (sRGB) color space is primary color space
First detailed timing is the preferred timing
Color Characteristics:
Red : 0.6679, 0.3310
Green: 0.2998, 0.6250
Blue : 0.1425, 0.0517
White: 0.3125, 0.3281
Established Timings I & II:
IBM : 720x400 70.082 Hz 9:5 31.467 kHz 28.320 MHz
DMT 0x04: 640x480 59.940 Hz 4:3 31.469 kHz 25.175 MHz
Apple : 640x480 66.667 Hz 4:3 35.000 kHz 30.240 MHz
DMT 0x05: 640x480 72.809 Hz 4:3 37.861 kHz 31.500 MHz
DMT 0x06: 640x480 75.000 Hz 4:3 37.500 kHz 31.500 MHz
DMT 0x08: 800x600 56.250 Hz 4:3 35.156 kHz 36.000 MHz
DMT 0x09: 800x600 60.317 Hz 4:3 37.879 kHz 40.000 MHz
DMT 0x0a: 800x600 72.188 Hz 4:3 48.077 kHz 50.000 MHz
DMT 0x0b: 800x600 75.000 Hz 4:3 46.875 kHz 49.500 MHz
Apple : 832x624 74.551 Hz 4:3 49.726 kHz 57.284 MHz
DMT 0x10: 1024x768 60.004 Hz 4:3 48.363 kHz 65.000 MHz
DMT 0x11: 1024x768 70.069 Hz 4:3 56.476 kHz 75.000 MHz
DMT 0x12: 1024x768 75.029 Hz 4:3 60.023 kHz 78.750 MHz
DMT 0x24: 1280x1024 75.025 Hz 5:4 79.976 kHz 135.000 MHz
Apple : 1152x870 75.062 Hz 192:145 68.681 kHz 100.000 MHz
Standard Timings:
DMT 0x15: 1152x864 75.000 Hz 4:3 67.500 kHz 108.000 MHz
DMT 0x20: 1280x960 60.000 Hz 4:3 60.000 kHz 108.000 MHz
DMT 0x23: 1280x1024 60.020 Hz 5:4 63.981 kHz 108.000 MHz
DMT 0x55: 1280x720 60.000 Hz 16:9 45.000 kHz 74.250 MHz
DMT 0x1c: 1280x800 59.810 Hz 16:10 49.702 kHz 83.500 MHz
DMT 0x2f: 1440x900 59.887 Hz 16:10 55.935 kHz 106.500 MHz
DMT 0x3a: 1680x1050 59.954 Hz 16:10 65.290 kHz 146.250 MHz
DMT 0x52: 1920x1080 60.000 Hz 16:9 67.500 kHz 148.500 MHz
Detailed Timing Descriptors:
DTD 1: 2560x1440 59.951 Hz 16:9 88.787 kHz 241.500 MHz (597 mm x 336 mm)
Hfront 48 Hsync 32 Hback 80 Hpol P
Vfront 3 Vsync 5 Vback 33 Vpol N
Display Range Limits:
Monitor ranges (GTF): 56-76 Hz V, 31-90 kHz H, max dotclock 250 MHz
Display Product Name: 'XF270HU'
Display Product Serial Number: 'T78EE0048521'
Checksum: 0x54
EDID of '/sys/class/drm/card0-HDMI-A-1/edid' was empty.
pobrn
8 May 2021 02:23
16
Interesting, no 144 Hz mode is in the EDID. I think that could be why the nvidia Xorg driver might reject the 144 Hz mode.
Can you run
echo -n /sys/class/drm/card*-* | xargs -d ' ' -I {} -exec bash -c 'edid-decode {}/edid ; true'
and
xrandr -q
when 144 Hz is working and post the output?
Have you tried having just a single monitor connected?
The nvidia X driver has “ModeValidation” option … maybe that could do something:
Option "ModeValidation" "NoHorizSyncCheck, NoVertSyncCheck, AllowNonEdidModes"
Both commands were run in a live Manjaro environment with open source drivers and 144hz enabled:
$ echo -n /sys/class/drm/card*-* | xargs -d ' ' -I {} -exec bash -c 'edid-decode {}/edid ; true'
xargs: warning: the -E option has no effect if -0 or -d is used.
EDID of '/sys/class/drm/card0-DP-1/edid' was empty.
edid-decode (hex):
00 ff ff ff ff ff ff 00 04 69 fd 22 de 82 01 00
25 19 01 03 68 30 1b 78 2a 2a c5 a4 56 4f 9e 28
0f 50 54 b7 ef 00 d1 c0 81 40 81 80 95 00 b3 00
71 4f 81 c0 81 00 02 3a 80 18 71 38 2d 40 58 2c
45 00 dc 0c 11 00 00 1e 00 00 00 ff 00 46 39 4c
4d 54 46 30 39 39 30 33 38 0a 00 00 00 fd 00 32
4b 18 53 11 00 0a 20 20 20 20 20 20 00 00 00 fc
00 41 53 55 53 20 56 53 32 32 38 0a 20 20 00 a5
----------------
Block 0, Base EDID:
EDID Structure Version & Revision: 1.3
Vendor & Product Identification:
Manufacturer: ACI
Model: 8957
Serial Number: 99038
Made in: week 37 of 2015
Basic Display Parameters & Features:
Analog display
Input voltage level: 0.7/0.7 V
Blank level equals black level
Sync: Separate
Maximum image size: 48 cm x 27 cm
Gamma: 2.20
DPMS levels: Off
RGB color display
First detailed timing is the preferred timing
Color Characteristics:
Red : 0.6406, 0.3378
Green: 0.3105, 0.6191
Blue : 0.1591, 0.0585
White: 0.3134, 0.3291
Established Timings I & II:
IBM : 720x400 70.082 Hz 9:5 31.467 kHz 28.320 MHz
DMT 0x04: 640x480 59.940 Hz 4:3 31.469 kHz 25.175 MHz
Apple : 640x480 66.667 Hz 4:3 35.000 kHz 30.240 MHz
DMT 0x06: 640x480 75.000 Hz 4:3 37.500 kHz 31.500 MHz
DMT 0x08: 800x600 56.250 Hz 4:3 35.156 kHz 36.000 MHz
DMT 0x09: 800x600 60.317 Hz 4:3 37.879 kHz 40.000 MHz
DMT 0x0a: 800x600 72.188 Hz 4:3 48.077 kHz 50.000 MHz
DMT 0x0b: 800x600 75.000 Hz 4:3 46.875 kHz 49.500 MHz
Apple : 832x624 74.551 Hz 4:3 49.726 kHz 57.284 MHz
DMT 0x10: 1024x768 60.004 Hz 4:3 48.363 kHz 65.000 MHz
DMT 0x11: 1024x768 70.069 Hz 4:3 56.476 kHz 75.000 MHz
DMT 0x12: 1024x768 75.029 Hz 4:3 60.023 kHz 78.750 MHz
DMT 0x24: 1280x1024 75.025 Hz 5:4 79.976 kHz 135.000 MHz
Standard Timings:
DMT 0x52: 1920x1080 60.000 Hz 16:9 67.500 kHz 148.500 MHz
DMT 0x20: 1280x960 60.000 Hz 4:3 60.000 kHz 108.000 MHz
DMT 0x23: 1280x1024 60.020 Hz 5:4 63.981 kHz 108.000 MHz
DMT 0x2f: 1440x900 59.887 Hz 16:10 55.935 kHz 106.500 MHz
DMT 0x3a: 1680x1050 59.954 Hz 16:10 65.290 kHz 146.250 MHz
DMT 0x15: 1152x864 75.000 Hz 4:3 67.500 kHz 108.000 MHz
DMT 0x55: 1280x720 60.000 Hz 16:9 45.000 kHz 74.250 MHz
DMT 0x1c: 1280x800 59.810 Hz 16:10 49.702 kHz 83.500 MHz
Detailed Timing Descriptors:
DTD 1: 1920x1080 60.000 Hz 16:9 67.500 kHz 148.500 MHz (476 mm x 268 mm)
Hfront 88 Hsync 44 Hback 148 Hpol P
Vfront 4 Vsync 5 Vback 36 Vpol P
Display Product Serial Number: 'F9LMTF099038'
Display Range Limits:
Monitor ranges (GTF): 50-75 Hz V, 24-83 kHz H, max dotclock 170 MHz
Display Product Name: 'ASUS VS228'
Checksum: 0xa5
EDID of '/sys/class/drm/card0-DP-3/edid' was empty.
edid-decode (hex):
00 ff ff ff ff ff ff 00 04 72 49 05 b3 23 81 90
08 1d 01 03 80 3c 22 78 2e 3c 90 ab 54 4c a0 24
0d 50 54 bf ef 80 71 4f 81 40 81 80 81 c0 81 00
95 00 b3 00 d1 c0 56 5e 00 a0 a0 a0 29 50 30 20
35 00 55 50 21 00 00 1a 00 00 00 fd 00 38 4c 1f
5a 19 00 0a 20 20 20 20 20 20 00 00 00 fc 00 58
46 32 37 30 48 55 0a 20 20 20 20 20 00 00 00 ff
00 54 37 38 45 45 30 30 34 38 35 32 31 0a 00 54
----------------
Block 0, Base EDID:
EDID Structure Version & Revision: 1.3
Vendor & Product Identification:
Manufacturer: ACR
Model: 1353
Serial Number: 2424382387
Made in: week 8 of 2019
Basic Display Parameters & Features:
Digital display
Maximum image size: 60 cm x 34 cm
Gamma: 2.20
DPMS levels: Off
RGB color display
Default (sRGB) color space is primary color space
First detailed timing is the preferred timing
Color Characteristics:
Red : 0.6679, 0.3310
Green: 0.2998, 0.6250
Blue : 0.1425, 0.0517
White: 0.3125, 0.3281
Established Timings I & II:
IBM : 720x400 70.082 Hz 9:5 31.467 kHz 28.320 MHz
DMT 0x04: 640x480 59.940 Hz 4:3 31.469 kHz 25.175 MHz
Apple : 640x480 66.667 Hz 4:3 35.000 kHz 30.240 MHz
DMT 0x05: 640x480 72.809 Hz 4:3 37.861 kHz 31.500 MHz
DMT 0x06: 640x480 75.000 Hz 4:3 37.500 kHz 31.500 MHz
DMT 0x08: 800x600 56.250 Hz 4:3 35.156 kHz 36.000 MHz
DMT 0x09: 800x600 60.317 Hz 4:3 37.879 kHz 40.000 MHz
DMT 0x0a: 800x600 72.188 Hz 4:3 48.077 kHz 50.000 MHz
DMT 0x0b: 800x600 75.000 Hz 4:3 46.875 kHz 49.500 MHz
Apple : 832x624 74.551 Hz 4:3 49.726 kHz 57.284 MHz
DMT 0x10: 1024x768 60.004 Hz 4:3 48.363 kHz 65.000 MHz
DMT 0x11: 1024x768 70.069 Hz 4:3 56.476 kHz 75.000 MHz
DMT 0x12: 1024x768 75.029 Hz 4:3 60.023 kHz 78.750 MHz
DMT 0x24: 1280x1024 75.025 Hz 5:4 79.976 kHz 135.000 MHz
Apple : 1152x870 75.062 Hz 192:145 68.681 kHz 100.000 MHz
Standard Timings:
DMT 0x15: 1152x864 75.000 Hz 4:3 67.500 kHz 108.000 MHz
DMT 0x20: 1280x960 60.000 Hz 4:3 60.000 kHz 108.000 MHz
DMT 0x23: 1280x1024 60.020 Hz 5:4 63.981 kHz 108.000 MHz
DMT 0x55: 1280x720 60.000 Hz 16:9 45.000 kHz 74.250 MHz
DMT 0x1c: 1280x800 59.810 Hz 16:10 49.702 kHz 83.500 MHz
DMT 0x2f: 1440x900 59.887 Hz 16:10 55.935 kHz 106.500 MHz
DMT 0x3a: 1680x1050 59.954 Hz 16:10 65.290 kHz 146.250 MHz
DMT 0x52: 1920x1080 60.000 Hz 16:9 67.500 kHz 148.500 MHz
Detailed Timing Descriptors:
DTD 1: 2560x1440 59.951 Hz 16:9 88.787 kHz 241.500 MHz (597 mm x 336 mm)
Hfront 48 Hsync 32 Hback 80 Hpol P
Vfront 3 Vsync 5 Vback 33 Vpol N
Display Range Limits:
Monitor ranges (GTF): 56-76 Hz V, 31-90 kHz H, max dotclock 250 MHz
Display Product Name: 'XF270HU'
Display Product Serial Number: 'T78EE0048521'
Checksum: 0x54
EDID of '/sys/class/drm/card0-HDMI-A-1/edid' was empty.
$ xrandr -q
Screen 0: minimum 320 x 200, current 4480 x 1440, maximum 16384 x 16384
DVI-D-1 connected primary 2560x1440+0+0 (normal left inverted right x axis y axis) 597mm x 336mm
2560x1440 59.95 +
1920x1440 60.00
1856x1392 60.01
1792x1344 60.01
2048x1152 59.90 59.91
1920x1200 59.88 59.95
1920x1080 59.96 60.00 59.93
1600x1200 75.00 70.00 65.00 60.00
1680x1050 59.95 59.88
1400x1050 74.76 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 75.02 60.02
1440x900 59.90
1400x900 59.96 59.88
1280x960 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1280x800 59.99 59.97 59.81 59.91
1152x864 75.00
1280x720 60.00 59.99 59.86 60.00 59.74
1024x768 75.05 60.04 75.03 70.07 60.00
960x720 75.00 60.00
928x696 75.00 60.05
896x672 75.05 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
832x624 74.55
960x540 59.96 59.99 59.63 59.82
800x600 75.00 70.00 65.00 60.00 72.19 75.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 74.76 59.98
800x450 59.95 59.82
640x512 75.02 60.02
700x450 59.96 59.88
640x480 60.00 75.00 72.81 75.00 66.67 59.94
720x405 59.51 58.99
720x400 70.08
684x384 59.88 59.85
640x400 59.88 59.98
576x432 75.00
640x360 59.86 59.83 59.84 59.32
512x384 75.03 70.07 60.00
512x288 60.00 59.92
416x312 74.66
480x270 59.63 59.82
400x300 72.19 75.12 60.32 56.34
432x243 59.92 59.57
320x240 72.81 75.00 60.05
360x202 59.51 59.13
320x180 59.84 59.32
2560x1440_144.0 144.00*
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 connected 1920x1080+2560+0 (normal left inverted right x axis y axis) 476mm x 268mm
1920x1080 60.00*+ 59.96 59.93
1680x1050 59.95 59.88
1400x1050 74.76 59.98
1600x900 59.95 59.82
1280x1024 75.02 60.02
1440x900 59.89
1400x900 59.96 59.88
1280x960 60.00
1440x810 59.97
1368x768 59.88 59.85
1280x800 59.99 59.97 59.81 59.91
1152x864 75.00
1280x720 60.00 59.99 59.86 60.00 59.74
1024x768 75.05 60.04 75.03 70.07 60.00
960x720 75.00 60.00
928x696 75.00 60.05
896x672 75.05 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
832x624 74.55
960x540 59.96 59.99 59.63 59.82
800x600 75.00 70.00 65.00 60.00 72.19 75.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 74.76 59.98
800x450 59.95 59.82
640x512 75.02 60.02
700x450 59.96 59.88
640x480 60.00 75.00 72.81 75.00 66.67 59.94
720x405 59.51 58.99
720x400 70.08
684x384 59.88 59.85
640x400 59.88 59.98
576x432 75.00
640x360 59.86 59.83 59.84 59.32
512x384 75.03 70.07 60.00
512x288 60.00 59.92
416x312 74.66
480x270 59.63 59.82
400x300 72.19 75.12 60.32 56.34
432x243 59.92 59.57
320x240 72.81 75.00 60.05
360x202 59.51 59.13
320x180 59.84 59.32
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
The ModeValidation
didn’t make a difference either. I also to tried overriding the EDID using CustomEDID
with one extracted from my Windows installation and another one from a livesystem, both to no avail.
pobrn
8 May 2021 12:14
18
That’s unfortunate. There’s also UseEdid
and UseEdidFreqs
options that you could try.
moson
8 May 2021 13:16
19
Maybe give these ones a try (genrated with cvt 1.2):
Modeline "2560x1440_144.00_rb1" 604.25 2560 2608 2640 2720 1440 1443 1448 1543 +hsync -vsync
Modeline "2560x1440_144.00_rb2" 586.59 2560 2568 2600 2640 1440 1529 1537 1543 +hsync -vsync
There’s also UseEdid
and UseEdidFreqs
options that you could try.
Using either of them, xrandr --addmode
still fails with the same error.
Maybe give these ones a try (genrated with cvt 1.2)
Still a BadMatch
, think it’s independent of the modeline.
Hi, I solved the problem by incrementally adding ModeValidation Parameters to /etc/X11/xorg.conf.d/20-nvidia.conf
until I could add whatever mode I wanted. Then I generated a modeline using this command:
cvt12 2560 1440 144 -b
# 2560x1440 @ 144.000 Hz Reduced Blank (CVT) field rate 144.000 Hz; hsync: 222.192 kHz; pclk: 586.59 MHz
Modeline "2560x1440_144.00_rb2" 586.59 2560 2568 2600 2640 1440 1529 1537 1543 +hsync -vsync
As you can see it uses -b
which makes it use CVT 1.2 reduced blanking timings.
Here is the updated 20-nvidia.conf
:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 465.31
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
Option "AllowIndirectGLXProtocol" "off"
Option "TripleBuffer" "on"
Option "UseEDIDFreqs" "FALSE"
Option "ModeValidation" "AllowNonEdidModes, NoMaxPclkCheck, NoEdidMaxPclkCheck, NoHorizSyncCheck, NoVertRefreshCheck"
EndSection
For Reference: Appendix D. X Config Options
I also added this to my /etc/profile:
export __GL_SYNC_TO_VBLANK=1
export __GL_SYNC_DISPLAY_DEVICE=DVI-D-0
export VDPAU_NVIDIA_SYNC_DISPLAY_DEVICE=DVI-D-0
I don’t know if that has anything to do with the solution but I read somewhere that it might help in some cases. Here is the link to the corresponding arch wiki paragraph: NVIDIA - ArchWiki
I’ve also updated the nvidia driver to v465.31:
Graphics: Device-1: NVIDIA GP106 [GeForce GTX 1060 6GB] driver: nvidia v: 465.31 bus-ID: 20:00.0
Display: server: X.org 1.20.11 driver: loaded: nvidia resolution: <missing: xdpyinfo>
Thank you so much for your help!
system
Closed
11 June 2021 13:03
22
This topic was automatically closed 15 days after the last reply. New replies are no longer allowed.