Can't get Manjaro to see and use the correct GPU - Somehow Solved

Support Graphics & Display
,
1

I am wanting to end up passing through my 3080 and use my 1070 for Manjaro to use. So far with a few installs I have not been successful in getting Manjaro Settings Manager to recognize it.
In Manjaro Settings Manager it is listed as “Unknown device name (nVidia Corporation)” and has the “video-nvidia” driver installed. Also the 1070 shows up in NVIDIA Settings, but the 3080 does not.
The monitor Manjaro is outputing to is attached to the 3080 and the other monitor/tv is attached to the 1070. so the display output is somehow mixed up too. I don;t know how to correct it.
Provided is the output from lspci -nnk and mhwd

lspci -nnk

00:00.0 Host bridge [0600]: Intel Corporation 12th Gen Core Processor Host Bridge/DRAM Registers [8086:4668] (rev 02)
	DeviceName: Onboard - Other
	Subsystem: Gigabyte Technology Co., Ltd 12th Gen Core Processor Host Bridge/DRAM Registers [1458:5000]
00:01.0 PCI bridge [0604]: Intel Corporation 12th Gen Core Processor PCI Express x16 Controller #1 [8086:460d] (rev 02)
	Subsystem: Gigabyte Technology Co., Ltd 12th Gen Core Processor PCI Express x16 Controller [1458:5000]
	Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Intel Corporation 12th Gen Core Processor PCI Express x4 Controller #0 [8086:464d] (rev 02)
	Kernel driver in use: pcieport
00:14.0 USB controller [0c03]: Intel Corporation Alder Lake-S PCH USB 3.2 Gen 2x2 XHCI Controller [8086:7ae0] (rev 11)
	DeviceName: Onboard - Other
	Subsystem: Gigabyte Technology Co., Ltd Alder Lake-S PCH USB 3.2 Gen 2x2 XHCI Controller [1458:5007]
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
00:14.2 RAM memory [0500]: Intel Corporation Alder Lake-S PCH Shared SRAM [8086:7aa7] (rev 11)
	DeviceName: Onboard - Other
00:15.0 Serial bus controller [0c80]: Intel Corporation Alder Lake-S PCH Serial IO I2C Controller #0 [8086:7acc] (rev 11)
	DeviceName: Onboard - Other
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci
00:15.1 Serial bus controller [0c80]: Intel Corporation Alder Lake-S PCH Serial IO I2C Controller #1 [8086:7acd] (rev 11)
	DeviceName: Onboard - Other
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci
00:15.2 Serial bus controller [0c80]: Intel Corporation Alder Lake-S PCH Serial IO I2C Controller #2 [8086:7ace] (rev 11)
	DeviceName: Onboard - Other
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci
00:15.3 Serial bus controller [0c80]: Intel Corporation Alder Lake-S PCH Serial IO I2C Controller #3 [8086:7acf] (rev 11)
	DeviceName: Onboard - Other
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci
00:16.0 Communication controller [0780]: Intel Corporation Alder Lake-S PCH HECI Controller #1 [8086:7ae8] (rev 11)
	DeviceName: Onboard - Other
	Subsystem: Gigabyte Technology Co., Ltd Alder Lake-S PCH HECI Controller [1458:1c3a]
	Kernel driver in use: mei_me
	Kernel modules: mei_me
00:17.0 SATA controller [0106]: Intel Corporation Alder Lake-S PCH SATA Controller [AHCI Mode] [8086:7ae2] (rev 11)
	DeviceName: Onboard - SATA
	Subsystem: Gigabyte Technology Co., Ltd Alder Lake-S PCH SATA Controller [AHCI Mode] [1458:b005]
	Kernel driver in use: ahci
00:19.0 Serial bus controller [0c80]: Intel Corporation Alder Lake-S PCH Serial IO I2C Controller #4 [8086:7afc] (rev 11)
	DeviceName: Onboard - Other
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci
00:19.1 Serial bus controller [0c80]: Intel Corporation Alder Lake-S PCH Serial IO I2C Controller #5 [8086:7afd] (rev 11)
	DeviceName: Onboard - Other
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci
00:1a.0 PCI bridge [0604]: Intel Corporation Alder Lake-S PCH PCI Express Root Port #25 [8086:7ac8] (rev 11)
	Kernel driver in use: pcieport
00:1c.0 PCI bridge [0604]: Intel Corporation Alder Lake-S PCH PCI Express Root Port #1 [8086:7ab8] (rev 11)
	Subsystem: Gigabyte Technology Co., Ltd Alder Lake-S PCH PCI Express Root Port [1458:5001]
	Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation Device [8086:7aba] (rev 11)
	Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001]
	Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation Alder Lake-S PCH PCI Express Root Port #8 [8086:7abf] (rev 11)
	Subsystem: Gigabyte Technology Co., Ltd Alder Lake-S PCH PCI Express Root Port [1458:5001]
	Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Z690 Chipset LPC/eSPI Controller [8086:7a84] (rev 11)
	DeviceName: Onboard - Other
	Subsystem: Gigabyte Technology Co., Ltd Z690 Chipset LPC/eSPI Controller [1458:5001]
00:1f.3 Audio device [0403]: Intel Corporation Alder Lake-S HD Audio Controller [8086:7ad0] (rev 11)
	DeviceName: Onboard - Sound
	Subsystem: Gigabyte Technology Co., Ltd Alder Lake-S HD Audio Controller [1458:a194]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel, snd_sof_pci_intel_tgl
00:1f.4 SMBus [0c05]: Intel Corporation Alder Lake-S PCH SMBus Controller [8086:7aa3] (rev 11)
	DeviceName: Onboard - Other
	Subsystem: Gigabyte Technology Co., Ltd Alder Lake-S PCH SMBus Controller [1458:5001]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801
00:1f.5 Serial bus controller [0c80]: Intel Corporation Alder Lake-S PCH SPI Controller [8086:7aa4] (rev 11)
	DeviceName: Onboard - Other
	Kernel driver in use: intel-spi
	Kernel modules: spi_intel_pci
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GA102 [GeForce RTX 3080 12GB] [10de:220a] (rev a1)
	Subsystem: eVga.com. Corp. GA102 [GeForce RTX 3080 12GB] [3842:4877]
	Kernel driver in use: nvidia
	Kernel modules: nouveau, nvidia_drm, nvidia
01:00.1 Audio device [0403]: NVIDIA Corporation GA102 High Definition Audio Controller [10de:1aef] (rev a1)
	Subsystem: eVga.com. Corp. GA102 High Definition Audio Controller [3842:4877]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
02:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983 [144d:a808]
	Subsystem: Samsung Electronics Co Ltd SSD 970 EVO [144d:a801]
	Kernel driver in use: nvme
	Kernel modules: nvme
03:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983 [144d:a808]
	Subsystem: Samsung Electronics Co Ltd SSD 970 EVO [144d:a801]
	Kernel driver in use: nvme
	Kernel modules: nvme
04:00.0 Network controller [0280]: Intel Corporation Wi-Fi 6 AX200 [8086:2723] (rev 1a)
	Subsystem: Intel Corporation Wi-Fi 6 AX200NGW [8086:0084]
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller [10ec:8125] (rev 05)
	Subsystem: Gigabyte Technology Co., Ltd RTL8125 2.5GbE Controller [1458:e000]
	Kernel driver in use: r8169
	Kernel modules: r8169
06:00.0 VGA compatible controller [0300]: NVIDIA Corporation GP104 [GeForce GTX 1070] [10de:1b81] (rev a1)
	Subsystem: eVga.com. Corp. GP104 [GeForce GTX 1070] [3842:6278]
	Kernel driver in use: vfio-pci
	Kernel modules: nouveau, nvidia_drm, nvidia
06:00.1 Audio device [0403]: NVIDIA Corporation GP104 High Definition Audio Controller [10de:10f0] (rev a1)
	Subsystem: eVga.com. Corp. GP104 High Definition Audio Controller [3842:6278]
	Kernel driver in use: vfio-pci
	Kernel modules: snd_hda_intel

mhwd

0000:01:00.0 (0300:10de:220a) Display controller nVidia Corporation:
--------------------------------------------------------------------------------
                  NAME               VERSION          FREEDRIVER           TYPE
--------------------------------------------------------------------------------
          video-nvidia            2023.03.23               false            PCI
    video-nvidia-470xx            2023.03.23               false            PCI
           video-linux            2018.05.04                true            PCI
     video-modesetting            2020.01.13                true            PCI
            video-vesa            2017.03.12                true            PCI


0000:06:00.0 (0300:10de:1b81) Display controller nVidia Corporation:
--------------------------------------------------------------------------------
                  NAME               VERSION          FREEDRIVER           TYPE
--------------------------------------------------------------------------------
          video-nvidia            2023.03.23               false            PCI
    video-nvidia-470xx            2023.03.23               false            PCI
    video-nvidia-390xx            2023.03.23               false            PCI
           video-linux            2018.05.04                true            PCI
     video-modesetting            2020.01.13                true            PCI
            video-vesa            2017.03.12                true            PCI


neofetch

██████████████████  ████████  ------------ 
██████████████████  ████████  OS: Manjaro Linux x86_64 
██████████████████  ████████  Host: Z690 UD AX DDR4 
████████            ████████                  Kernel: 6.1.38-1-MANJARO 
████████  ████████  ████████     Uptime: 31 mins 
████████  ████████  ████████     Packages: 1208 (pacman) 
████████  ████████  ████████     Shell: bash 5.1.16 
████████  ████████  ████████     Resolution: 2560x1440 
████████  ████████  ████████     DE: Xfce 4.18 
████████  ████████  ████████     WE: Xfwm4 
████████  ████████  ████████     WM Theme: Matcha-sea 
████████  ████████  ████████     WM Theme: Matcha-sea [GTK2], Adwaita [GTK3] 
████████  ████████  ████████     Icons: Papirus-Maia [GTK2], Adwaita [GTK3] 
                                 Terminal: xfce4-terminal 
                                 Terminal Font Monospace 12 
                                 CPU: 12th Gen Intel i7-12700KF (20) @ 4.900GHz 
                                 GPU: NVIDIA GeForce RTX 3080 12GB 
                                 GPU: NVIDIA GeForce GTX 1070 
                                 Memory: 2971MiB / 31932MiB
2

Can you post inxi -Fza on console ?

3

Here are the results of that.

inxi -Fza

System:
  Kernel: 6.1.38-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.1.1
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1-x86_64
    root=UUID=ce61dba2-bfa8-4ed9-a24a-f9973e3832e8 rw quiet
    cryptdevice=UUID=8cb3772b-e40c-4bf1-9cea-9a92a99d762b:luks-8cb3772b-e40c-4bf1-9cea-9a92a99d762b
    root=/dev/mapper/luks-8cb3772b-e40c-4bf1-9cea-9a92a99d762b splash
    apparmor=1 security=apparmor
    resume=/dev/mapper/luks-67093ef3-d4eb-4d8c-a810-c17504dd55ed
    udev.log_priority=3 intel_iommu=on rd.driver.pre=vfio-pci
    kvm.ignore_msrs=1
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm
    v: 4.18.0 vt: 7 dm: LightDM v: 1.32.0 Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: Gigabyte model: Z690 UD AX DDR4 v: x.x
    serial: <superuser required> UEFI: American Megatrends LLC. v: F24
    date: 06/06/2023
CPU:
  Info: model: 12th Gen Intel Core i7-12700KF bits: 64 type: MST AMCP
    arch: Alder Lake gen: core 12 level: v3 note: check built: 2021+
    process: Intel 7 (10nm ESF) family: 6 model-id: 0x97 (151) stepping: 2
    microcode: 0x2C
  Topology: cpus: 1x cores: 12 mt: 8 tpc: 2 st: 4 threads: 20 smt: enabled
    cache: L1: 1024 KiB desc: d-4x32 KiB, 8x48 KiB; i-8x32 KiB, 4x64 KiB
    L2: 12 MiB desc: 8x1.2 MiB, 1x2 MiB L3: 25 MiB desc: 1x25 MiB
  Speed (MHz): avg: 3377 high: 3600 min/max: 800/4900:5000:3800 scaling:
    driver: intel_pstate governor: powersave cores: 1: 3600 2: 3600 3: 3600
    4: 3600 5: 3600 6: 3600 7: 3600 8: 3600 9: 3600 10: 3600 11: 3600 12: 3600
    13: 3600 14: 3600 15: 3600 16: 3600 17: 3600 18: 3600 19: 1957 20: 801
    bogomips: 144440
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB
    filling, PBRSB-eIBRS: SW sequence
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA GA102 [GeForce RTX 3080 12GB] vendor: eVga.com.
    driver: nvidia v: 535.54.03 alternate: nouveau,nvidia_drm non-free: 535.xx+
    status: current (as of 2023-07) arch: Ampere code: GAxxx
    process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 2 speed: 5 GT/s lanes: 16
    link-max: gen: 4 speed: 16 GT/s bus-ID: 01:00.0 chip-ID: 10de:220a
    class-ID: 0300
  Device-2: NVIDIA GP104 [GeForce GTX 1070] vendor: eVga.com.
    driver: vfio-pci v: N/A alternate: nouveau,nvidia_drm,nvidia
    non-free: 535.xx+ status: current (as of 2023-07) arch: Pascal code: GP10x
    process: TSMC 16nm built: 2016-21 pcie: gen: 1 speed: 2.5 GT/s lanes: 1
    link-max: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 06:00.0
    chip-ID: 10de:1b81 class-ID: 0300
  Display: x11 server: X.Org v: 21.1.8 compositor: xfwm v: 4.18.0 driver: X:
    loaded: nvidia gpu: nvidia,vfio-pci display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 2560x1440 s-dpi: 108 s-size: 602x342mm (23.70x13.46")
    s-diag: 692mm (27.26") monitors: <missing: xrandr>
  API: OpenGL Message: Unable to show GL data. Required tool glxinfo
    missing.
Audio:
  Device-1: Intel Alder Lake-S HD Audio vendor: Gigabyte driver: snd_hda_intel
    v: kernel alternate: snd_sof_pci_intel_tgl bus-ID: 00:1f.3
    chip-ID: 8086:7ad0 class-ID: 0403
  Device-2: NVIDIA GA102 High Definition Audio vendor: eVga.com.
    driver: snd_hda_intel v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 16
    link-max: gen: 4 speed: 16 GT/s bus-ID: 01:00.1 chip-ID: 10de:1aef
    class-ID: 0403
  Device-3: NVIDIA GP104 High Definition Audio vendor: eVga.com.
    driver: vfio-pci alternate: snd_hda_intel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 link-max: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 06:00.1
    chip-ID: 10de:10f0 class-ID: 0403
  Device-4: C-Media Storm HP-USB500 5.1 Headset
    driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 1.1 speed: 12 Mb/s
    lanes: 1 mode: 1.1 bus-ID: 1-7.2:9 chip-ID: 0d8c:0006 class-ID: 0300
    serial: <filter>
  Device-5: Generalplus USB Audio Device
    driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 1.1 speed: 12 Mb/s
    lanes: 1 mode: 1.1 bus-ID: 1-7.3:11 chip-ID: 1b3f:2008 class-ID: 0300
  API: ALSA v: k6.1.38-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: JACK v: 1.9.22 status: off tools: N/A
  Server-2: PipeWire v: 0.3.73 status: off tools: pw-cli
  Server-3: PulseAudio v: 16.1 status: active with: pulseaudio-alsa
    type: plugin tools: pacat,pactl,pavucontrol
Network:
  Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2
    speed: 5 GT/s lanes: 1 bus-ID: 04:00.0 chip-ID: 8086:2723 class-ID: 0280
  IF: wlp4s0 state: down mac: <filter>
  Device-2: Realtek RTL8125 2.5GbE vendor: Gigabyte driver: r8169 v: kernel
    pcie: gen: 2 speed: 5 GT/s lanes: 1 port: 4000 bus-ID: 05:00.0
    chip-ID: 10ec:8125 class-ID: 0200
  IF: enp5s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
  Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-14:13 chip-ID: 8087:0029
    class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 2 state: up address: see --recommends
Drives:
  Local Storage: total: 11.82 TiB used: 13.5 GiB (0.1%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:2 vendor: Samsung
    model: SSD 970 EVO Plus 1TB size: 931.51 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
    fw-rev: 1B2QEXM7 temp: 35.9 C scheme: GPT
  ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Samsung
    model: SSD 970 EVO Plus 2TB size: 1.82 TiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
    fw-rev: 4B2QEXM7 temp: 30.9 C scheme: MBR
  ID-3: /dev/sda maj-min: 8:0 vendor: HGST (Hitachi) model: HDN721010ALE604
    size: 9.1 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    tech: HDD rpm: 7200 serial: <filter> fw-rev: 83XN scheme: GPT
Partition:
  ID-1: / raw-size: 922.41 GiB size: 906.86 GiB (98.31%) used: 13.5 GiB (1.5%)
    fs: ext4 dev: /dev/dm-0 maj-min: 254:0
    mapped: luks-8cb3772b-e40c-4bf1-9cea-9a92a99d762b
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 448 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:3
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 8.8 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/dm-1 maj-min: 254:1
    mapped: luks-67093ef3-d4eb-4d8c-a810-c17504dd55ed
Sensors:
  System Temperatures: cpu: 21.0 C mobo: N/A gpu: nvidia temp: 26 C
  Fan Speeds (RPM): N/A gpu: nvidia fan: 0%
Info:
  Processes: 404 Uptime: 1h 40m wakeups: 0 Memory: total: 32 GiB
  available: 31.18 GiB used: 3.69 GiB (11.8%) Init: systemd v: 253
  default: graphical tool: systemctl Compilers: gcc: 13.1.1 clang: 15.0.7
  Packages: pm: pacman pkgs: 1208 libs: 373 tools: pamac pm: flatpak pkgs: 0
  Shell: Bash v: 5.1.16 running-in: xfce4-terminal inxi: 3.3.28
4

Have you installed a virtual machine ?

5

Hi @Sichvot, and welcome!

:bangbang: Here’s a tip: :bangbang:

To provide terminal output, copy the text you wish to share, and paste it here, surrounded by three (3) backticks, a.k.a grave accents. Like this:

```
pasted text
```

Or three (3) tilde signs, like this:

~~~
pasted text
~~~

This will just cause it to be rendered like this:

Portaest sed
elementum
cursus nisl nisi
hendrerit ac quis
sit
adipiscing
tortor sit leo commodo.

Instead of like this:

Portaest sed elementum cursus nisl nisi hendrerit ac quis sit adipiscing tortor sit leo commodo.

Alternatively, paste the text you wish to format as terminal output, select all pasted text, and click the </> button on the taskbar. This will indent the whole pasted section with one TAB, causing it to render the same way as descrribed above.

Thereby improving legibility and making it much easier for those trying to be of assistance.

Please edit your post accordingly.

For more information, please see:

6

Similar, if not the same, issue here, but with AMD.
Haven’t manage to make it work.

Check my troubleshooting, hopefully one of us finds a solution and share it.

7

I have not installed the VM yet on this installation, because, if I create the VM and pass the 3080 to the VM I can no longer see the login screen to enter the password, I’d have to crtl alt f2 to get a TTY terminal which again appears on the monitor attached to the 3080 and I can;t get the 1070 to display continuously from that it shuts off after entering LVM password. last output on the correct monitor is

Enter passphrase for hd1,gpt2 (8cb3772b-e40c-4bf1-9caa-9a92a99d762b):
Attempting to decrypt master key...
Slot 0 opened

The step forward is it’s still getting that signal to display that instead of dropping signal completely and shutting off.

8

Thank you,
I was trying to figure out how to make it easier to ready when I was posting it.
This makes it look much better :slight_smile:

1 Like
9

OK, I think I figured it out for now… Here’s what I did, maybe I didn;t have to do all these steps. sudo nvidia-settings would not make the necessary changes and Manjaro settings manager still not seeing the 3080 card correctly.

  1. Re-installed Manjaro again with proprietary drivers because I messed up my install again trying things.
  2. Ran sudo nvidia-xconfig
  3. Edit the /etc/xorg.conf it generates changing each monitor and GPU from device 0 to 1 or 1 or 0
  4. Copy that xorg.conf to /etc/X11/mhwd.d/nvidia.conf and /etc/X11/xorg.conf.d/90-mhwd.conf
    reboot.
    the new thing to figure out is how to resize the login screen, it no longer fit properly to the 1920x1080 default tv res. it’s still on the 2560x1440 monitor res.

Thank you everyone for helping this far, maybe my solution will work for someone else.

10

Login screen seems to have decided to fix it’s self over time for some reason. rest of passing through and setting up vm went rather smooth after this. :slight_smile:

11

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.