Black Screen in the middle of working

I’m running Stable on an ASUS TUF Gaming A17 - an "AMD Ryzen 7 4800H with Radeon Graphics
" - and a Nvidia GTX 1660 Ti. with a second monitor on the HTML Out port (Adapted to VGA) - battery at 100%, always plugged in.

I would say this is a graphic drivers issue because I went mhwd -i video-hybrid-amd-nvidia-455xx-prime - but I’ve tried 450, 440, with no obvious change in the behavior.

MemTest86 made one pass, no errors.

Sometimes it can go most of the day without blackscreening, or sometimes a few minutes after boot, and then - black. Keyboard is still lit, doing it’s color cycle. No change after waiting for a minute. I can hold down power to force reboot, get some error messages about backlight not being restored (and it sits there saying nothing), soft reboot for a second look (not hold down power), and it gets to GDM login, no obvious ill effects.

I have no idea what logs might even be kept through this failure.

:+1: Welcome to Manjaro! :+1:

Please read this:

Not many if you power down using the power button, so use the above first and then Please read this:


and post some more information so we can see what’s really going on. Now we know the symptom of the disease, but we need some more probing to know where the origin lies…

An inxi --admin --verbosity=7 --filter --no-host --width would be the minimum required information… (Personally Identifiable Information like serial numbers and MAC addresses will be filtered out by the above command)

:+1:

P.S. If you enter a bit more details in your profile, we can also see which Desktop Environment you’re using, which CPU/GPU you have, …

I have heard or REISUB previously, now I have it written down.

Note: I have switched to Nouveau for today to see if the issue continues without Nvidia prime drivers. It may take a few hours. to see it again.

~ >>> inxi --admin --verbosity=7 --filter --no-host --width                                                                                                                                                       
System:
  Kernel: 5.8.16-2-MANJARO x86_64 bits: 64 compiler: N/A 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.8-x86_64 
  root=UUID=54fcf46e-8185-4998-9b0c-d104128658d6 rw quiet udev.log_priority=3 
  Desktop: GNOME 3.36.6 tk: GTK 3.24.23 wm: gnome-shell dm: GDM 3.36.3 
  Distro: Manjaro Linux 
Machine:
  Type: Laptop System: ASUSTeK product: TUF Gaming FA706IU_TUF706IU v: 1.0 
  serial: <filter> 
  Mobo: ASUSTeK model: FA706IU v: 1.0 serial: <filter> 
  UEFI: American Megatrends v: FA706IU.311 date: 09/11/2020 
Battery:
  ID-1: BAT1 charge: 94.3 Wh condition: 94.3/90.2 Wh (105%) volts: 5.4/15.9 
  model: ASUS A32-K55 type: Li-ion serial: N/A status: Unknown 
Memory:
  RAM: total: 62.31 GiB used: 3.66 GiB (5.9%) 
  RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
CPU:
  Topology: 8-Core model: AMD Ryzen 7 4800H with Radeon Graphics bits: 64 
  type: MT MCP arch: Zen family: 17 (23) model-id: 60 (96) stepping: 1 
  microcode: 8600104 L2 cache: 4096 KiB bogomips: 92666 
  Speed: 1907 MHz min/max: 1400/2900 MHz boost: enabled Core speeds (MHz): 
  1: 1905 2: 1908 3: 1397 4: 1397 5: 1397 6: 1396 7: 1397 8: 1397 9: 3954 
  10: 2598 11: 4179 12: 3389 13: 1903 14: 1906 15: 1397 16: 1397 
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 
  bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy 
  constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc 
  cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid 
  fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs irperf lahf_lm 
  lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx 
  nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat pausefilter 
  pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni 
  popcnt pse pse36 rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sev 
  sha_ni skinit smap smca sme smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 
  stibp succor svm svm_lock syscall tce topoext tsc tsc_scale umip 
  v_vmsave_vmload vgif vmcb_clean vme vmmcall wbnoinvd wdt xgetbv1 xsave 
  xsavec xsaveerptr xsaveopt xsaves 
  Vulnerabilities: Type: itlb_multihit status: Not affected 
  Type: l1tf status: Not affected 
  Type: mds status: Not affected 
  Type: meltdown status: Not affected 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW, 
  STIBP: conditional, RSB filling 
  Type: srbds status: Not affected 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: NVIDIA TU116M [GeForce GTX 1660 Ti Mobile] vendor: ASUSTeK 
  driver: nouveau v: kernel bus ID: 01:00.0 chip ID: 10de:2191 
  Device-2: AMD Renoir vendor: ASUSTeK driver: amdgpu v: kernel 
  bus ID: 06:00.0 chip ID: 1002:1636 
  Device-3: IMC Networks USB2.0 HD UVC WebCam type: USB driver: uvcvideo 
  bus ID: 3-4:5 chip ID: 13d3:56a2 serial: <filter> 
  Display: x11 server: X.org 1.20.9 compositor: gnome-shell 
  driver: amdgpu,ati,modesetting,nouveau unloaded: radeon 
  alternate: fbdev,nv,vesa resolution: <xdpyinfo missing> 
  OpenGL: renderer: AMD RENOIR (DRM 3.38.0 5.8.16-2-MANJARO LLVM 10.0.1) 
  v: 4.6 Mesa 20.1.8 direct render: Yes 
Audio:
  Device-1: NVIDIA TU116 High Definition Audio vendor: ASUSTeK 
  driver: snd_hda_intel v: kernel bus ID: 01:00.1 chip ID: 10de:1aeb 
  Device-2: AMD vendor: ASUSTeK driver: snd_hda_intel v: kernel 
  bus ID: 06:00.1 chip ID: 1002:1637 
  Device-3: AMD Raven/Raven2/FireFlight/Renoir Audio Processor 
  vendor: DekTec Digital Video B.V. driver: snd_rn_pci_acp3x v: kernel 
  alternate: snd_pci_acp3x bus ID: 06:00.5 chip ID: 1022:15e2 
  Device-4: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel 
  v: kernel bus ID: 06:00.6 chip ID: 1022:15e3 
  Sound Server: ALSA v: k5.8.16-2-MANJARO 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: ASUSTeK driver: r8169 v: kernel port: e000 bus ID: 02:00.0 
  chip ID: 10ec:8168 
  IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
  IP v4: <filter> type: dynamic noprefixroute scope: global 
  broadcast: <filter> 
  IP v6: <filter> type: noprefixroute scope: link 
  Device-2: Realtek RTL8822CE 802.11ac PCIe Wireless Network Adapter 
  vendor: AzureWave driver: rtw_8822ce v: N/A modules: rtw88_8822ce port: d000 
  bus ID: 03:00.0 chip ID: 10ec:c822 
  IF: wlp3s0 state: up mac: <filter> 
  IP v4: <filter> type: dynamic noprefixroute scope: global 
  broadcast: <filter> 
  IP v6: <filter> type: noprefixroute scope: link 
  IF-ID-1: virbr0 state: down mac: <filter> 
  IP v4: <filter> scope: global broadcast: <filter> 
  IF-ID-2: virbr0-nic state: down mac: <filter> 
  WAN IP: <filter> 
Drives:
  Local Storage: total: 5.50 TiB used: 1.26 TiB (22.9%) 
  SMART Message: Required tool smartctl not installed. Check --recommends 
  ID-1: /dev/nvme0n1 vendor: A-Data model: SX8200PNP size: 1.86 TiB 
  block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 
  serial: <filter> rev: 42AZS6AC scheme: GPT 
  ID-2: /dev/nvme1n1 vendor: Western Digital model: PC SN530 SDBPNPZ-1T00-1002 
  size: 953.87 GiB block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s 
  lanes: 4 serial: <filter> rev: 21106000 scheme: GPT 
  ID-3: /dev/sda type: USB vendor: Seagate model: Backup+ Hub BK 
  size: 3.64 TiB block size: physical: 4096 B logical: 512 B serial: <filter> 
  rev: D781 scheme: GPT 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 953.57 GiB size: 937.60 GiB (98.33%) 
  used: 449.59 GiB (48.0%) fs: ext4 dev: /dev/nvme1n1p2 label: N/A 
  uuid: 54fcf46e-8185-4998-9b0c-d104128658d6 
  ID-2: /boot/efi raw size: 300.0 MiB size: 299.4 MiB (99.80%) 
  used: 312 KiB (0.1%) fs: vfat dev: /dev/nvme1n1p1 label: N/A uuid: 000D-E664 
  ID-3: /mnt/backup1 raw size: 953.86 GiB size: 937.90 GiB (98.33%) 
  used: 498.05 GiB (53.1%) fs: ext4 dev: /dev/nvme0n1p1 label: N/A 
  uuid: c1683bee-3376-4e2c-a32e-6c79136ed9ed 
  ID-4: /mnt/backup2 raw size: 953.86 GiB size: 937.90 GiB (98.33%) 
  used: 71.6 MiB (0.0%) fs: ext4 dev: /dev/nvme0n1p2 label: N/A 
  uuid: 986eb25a-5afe-49c1-8a0e-90dce7848c32 
  ID-5: /run/media/FILTER>/04b49495-02b1-49d6-a9a6-e7b7dc179f8c 
  raw size: 3.64 TiB size: 3.58 TiB (98.40%) used: 344.03 GiB (9.4%) fs: ext4 
  dev: /dev/sda1 label: N/A uuid: 04b49495-02b1-49d6-a9a6-e7b7dc179f8c 
Swap:
  Alert: No Swap data was found. 
Unmounted:
  Message: No unmounted partitions found. 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 speed: 480 Mb/s 
  chip ID: 1d6b:0002 
  Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s 
  chip ID: 1d6b:0003 
  Hub: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
  chip ID: 1d6b:0002 
  Hub: 3-2:2 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
  chip ID: 05e3:0608 
  Device-1: 3-2.3:4 info: Logitech M-U0007 [Corded Mouse M500] type: Mouse 
  driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s 
  chip ID: 046d:c069 
  Device-2: 3-2.4:6 info: Holtek USB2.0 HD UVC WebCam type: Keyboard,HID 
  driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s 
  chip ID: 04d9:a0ce 
  Hub: 3-3:3 info: Seagate RSS LLC Backup Plus Hub ports: 3 rev: 2.1 
  speed: 480 Mb/s chip ID: 0bc2:ab44 
  Device-1: 3-3.1:7 info: Seagate RSS LLC Backup Plus Hub (Mass Storage) 
  type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s 
  chip ID: 0bc2:ab38 serial: <filter> 
  Device-2: 3-3.2:8 info: Yubicom Yubikey NEO(-N) OTP type: Keyboard 
  driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s 
  chip ID: 1050:0110 
  Device-3: 3-4:5 info: IMC Networks USB2.0 HD UVC WebCam type: Video 
  driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 13d3:56a2 
  serial: <filter> 
  Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.1 speed: 10 Gb/s 
  chip ID: 1d6b:0003 
  Hub: 5-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
  chip ID: 1d6b:0002 
  Device-1: 5-1:2 info: IMC Networks Bluetooth Radio type: Bluetooth 
  driver: btusb interfaces: 2 rev: 1.0 speed: 12 Mb/s chip ID: 13d3:3548 
  serial: <filter> 
  Hub: 6-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.1 speed: 10 Gb/s 
  chip ID: 1d6b:0003 
Sensors:
  System Temperatures: cpu: 57.9 C mobo: N/A 
  Fan Speeds (RPM): N/A 
  GPU: device: amdgpu temp: 50 C device: nouveau temp: 39 C 
Info:
  Processes: 410 Uptime: 10m Init: systemd v: 246 Compilers: gcc: 10.2.0 
  Packages: 1324 pacman: 1311 lib: 438 flatpak: 13 Shell: Zsh v: 5.8 
  running in: guake inxi: 3.1.05 

(I’ve had QEMU running 5 vms’ windows updates at once on this thing. Hours saved.)

1 Like

OK, just had the behavior on Nouveau drivers.

REISUB (which I had tested to make sure I set up SysRq correctly earlier) did not trigger a system reboot. However, it only took one hard reset after that to boot up again - no extra soft reboot after the hard reset… so some parts of it might have worked.

Reinstalling the Nvidia prime drivers now to see what difference they make during tomorrow’s work.

Just in case, inxi after the drivers were updated

~ >>> inxi --admin --verbosity=7 --filter --no-host --width                                                                                                                                                       
System:
  Kernel: 5.8.16-2-MANJARO x86_64 bits: 64 compiler: N/A 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.8-x86_64 
  root=UUID=54fcf46e-8185-4998-9b0c-d104128658d6 rw quiet udev.log_priority=3 
  Desktop: GNOME 3.36.6 tk: GTK 3.24.23 wm: gnome-shell dm: GDM 3.36.3 
  Distro: Manjaro Linux 
Machine:
  Type: Laptop System: ASUSTeK product: TUF Gaming FA706IU_TUF706IU v: 1.0 
  serial: <filter> 
  Mobo: ASUSTeK model: FA706IU v: 1.0 serial: <filter> 
  UEFI: American Megatrends v: FA706IU.311 date: 09/11/2020 
Battery:
  ID-1: BAT1 charge: 94.3 Wh condition: 94.3/90.2 Wh (105%) volts: 5.4/15.9 
  model: ASUS A32-K55 type: Li-ion serial: N/A status: Unknown 
Memory:
  RAM: total: 62.31 GiB used: 2.74 GiB (4.4%) 
  RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
CPU:
  Topology: 8-Core model: AMD Ryzen 7 4800H with Radeon Graphics bits: 64 
  type: MT MCP arch: Zen family: 17 (23) model-id: 60 (96) stepping: 1 
  microcode: 8600104 L2 cache: 4096 KiB bogomips: 92651 
  Speed: 1907 MHz min/max: 1400/2900 MHz boost: enabled Core speeds (MHz): 
  1: 2670 2: 1907 3: 1397 4: 1397 5: 1397 6: 1396 7: 1397 8: 1396 9: 1907 
  10: 1907 11: 1907 12: 1906 13: 4278 14: 4291 15: 1397 16: 1397 
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 
  bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy 
  constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc 
  cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid 
  fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs irperf lahf_lm 
  lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx 
  nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat pausefilter 
  pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni 
  popcnt pse pse36 rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sev 
  sha_ni skinit smap smca sme smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 
  stibp succor svm svm_lock syscall tce topoext tsc tsc_scale umip 
  v_vmsave_vmload vgif vmcb_clean vme vmmcall wbnoinvd wdt xgetbv1 xsave 
  xsavec xsaveerptr xsaveopt xsaves 
  Vulnerabilities: Type: itlb_multihit status: Not affected 
  Type: l1tf status: Not affected 
  Type: mds status: Not affected 
  Type: meltdown status: Not affected 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW, 
  STIBP: conditional, RSB filling 
  Type: srbds status: Not affected 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: NVIDIA TU116M [GeForce GTX 1660 Ti Mobile] vendor: ASUSTeK 
  driver: nvidia v: 455.28 alternate: nouveau,nvidia_drm bus ID: 01:00.0 
  chip ID: 10de:2191 
  Device-2: AMD Renoir vendor: ASUSTeK driver: amdgpu v: kernel 
  bus ID: 06:00.0 chip ID: 1002:1636 
  Device-3: IMC Networks USB2.0 HD UVC WebCam type: USB driver: uvcvideo 
  bus ID: 3-4:5 chip ID: 13d3:56a2 serial: <filter> 
  Display: x11 server: X.org 1.20.9 compositor: gnome-shell 
  driver: amdgpu,ati,nvidia unloaded: modesetting,nouveau,radeon 
  alternate: fbdev,nv,vesa resolution: <xdpyinfo missing> 
  OpenGL: renderer: AMD RENOIR (DRM 3.38.0 5.8.16-2-MANJARO LLVM 10.0.1) 
  v: 4.6 Mesa 20.1.8 direct render: Yes 
Audio:
  Device-1: AMD vendor: ASUSTeK driver: snd_hda_intel v: kernel 
  bus ID: 06:00.1 chip ID: 1002:1637 
  Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor 
  vendor: DekTec Digital Video B.V. driver: snd_rn_pci_acp3x v: kernel 
  alternate: snd_pci_acp3x bus ID: 06:00.5 chip ID: 1022:15e2 
  Device-3: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel 
  v: kernel bus ID: 06:00.6 chip ID: 1022:15e3 
  Sound Server: ALSA v: k5.8.16-2-MANJARO 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: ASUSTeK driver: r8169 v: kernel port: e000 bus ID: 02:00.0 
  chip ID: 10ec:8168 
  IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
  IP v4: <filter> type: dynamic noprefixroute scope: global 
  broadcast: <filter> 
  IP v6: <filter> type: noprefixroute scope: link 
  Device-2: Realtek RTL8822CE 802.11ac PCIe Wireless Network Adapter 
  vendor: AzureWave driver: rtw_8822ce v: N/A modules: rtw88_8822ce port: d000 
  bus ID: 03:00.0 chip ID: 10ec:c822 
  IF: wlp3s0 state: up mac: <filter> 
  IP v4: <filter> type: dynamic noprefixroute scope: global 
  broadcast: <filter> 
  IP v6: <filter> type: noprefixroute scope: link 
  IF-ID-1: virbr0 state: down mac: <filter> 
  IP v4: <filter> scope: global broadcast: <filter> 
  IF-ID-2: virbr0-nic state: down mac: <filter> 
  WAN IP: <filter> 
Drives:
  Local Storage: total: 5.50 TiB used: 1.36 TiB (24.7%) 
  SMART Message: Required tool smartctl not installed. Check --recommends 
  ID-1: /dev/nvme0n1 vendor: A-Data model: SX8200PNP size: 1.86 TiB 
  block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 
  serial: <filter> rev: 42AZS6AC scheme: GPT 
  ID-2: /dev/nvme1n1 vendor: Western Digital model: PC SN530 SDBPNPZ-1T00-1002 
  size: 953.87 GiB block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s 
  lanes: 4 serial: <filter> rev: 21106000 scheme: GPT 
  ID-3: /dev/sda type: USB vendor: Seagate model: Backup+ Hub BK 
  size: 3.64 TiB block size: physical: 4096 B logical: 512 B serial: <filter> 
  rev: D781 scheme: GPT 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 953.57 GiB size: 937.60 GiB (98.33%) 
  used: 404.38 GiB (43.1%) fs: ext4 dev: /dev/nvme1n1p2 label: N/A 
  uuid: 54fcf46e-8185-4998-9b0c-d104128658d6 
  ID-2: /boot/efi raw size: 300.0 MiB size: 299.4 MiB (99.80%) 
  used: 312 KiB (0.1%) fs: vfat dev: /dev/nvme1n1p1 label: N/A uuid: 000D-E664 
  ID-3: /mnt/backup1 raw size: 953.86 GiB size: 937.90 GiB (98.33%) 
  used: 640.39 GiB (68.3%) fs: ext4 dev: /dev/nvme0n1p1 label: N/A 
  uuid: c1683bee-3376-4e2c-a32e-6c79136ed9ed 
  ID-4: /mnt/backup2 raw size: 953.86 GiB size: 937.90 GiB (98.33%) 
  used: 71.6 MiB (0.0%) fs: ext4 dev: /dev/nvme0n1p2 label: N/A 
  uuid: 986eb25a-5afe-49c1-8a0e-90dce7848c32 
  ID-5: /run/media/<FILTER>/04b49495-02b1-49d6-a9a6-e7b7dc179f8c 
  raw size: 3.64 TiB size: 3.58 TiB (98.40%) used: 344.03 GiB (9.4%) fs: ext4 
  dev: /dev/sda1 label: N/A uuid: 04b49495-02b1-49d6-a9a6-e7b7dc179f8c 
Swap:
  Alert: No Swap data was found. 
Unmounted:
  Message: No unmounted partitions found. 
USB:
  Hub: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
  chip ID: 1d6b:0002 
  Hub: 3-2:2 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
  chip ID: 05e3:0608 
  Device-1: 3-2.3:4 info: Logitech M-U0007 [Corded Mouse M500] type: Mouse 
  driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s 
  chip ID: 046d:c069 
  Device-2: 3-2.4:6 info: Holtek USB2.0 HD UVC WebCam type: Keyboard,HID 
  driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s 
  chip ID: 04d9:a0ce 
  Hub: 3-3:3 info: Seagate RSS LLC Backup Plus Hub ports: 3 rev: 2.1 
  speed: 480 Mb/s chip ID: 0bc2:ab44 
  Device-1: 3-3.1:7 info: Seagate RSS LLC Backup Plus Hub (Mass Storage) 
  type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s 
  chip ID: 0bc2:ab38 serial: <filter> 
  Device-2: 3-4:5 info: IMC Networks USB2.0 HD UVC WebCam type: Video 
  driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 13d3:56a2 
  serial: <filter> 
  Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.1 speed: 10 Gb/s 
  chip ID: 1d6b:0003 
  Hub: 5-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
  chip ID: 1d6b:0002 
  Device-1: 5-1:2 info: IMC Networks Bluetooth Radio type: Bluetooth 
  driver: btusb interfaces: 2 rev: 1.0 speed: 12 Mb/s chip ID: 13d3:3548 
  serial: <filter> 
  Hub: 6-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.1 speed: 10 Gb/s 
  chip ID: 1d6b:0003 
Sensors:
  System Temperatures: cpu: 60.2 C mobo: N/A gpu: amdgpu temp: 50 C 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 445 Uptime: 1m Init: systemd v: 246 Compilers: gcc: 10.2.0 
  Packages: 1328 pacman: 1315 lib: 439 flatpak: 13 Shell: Zsh v: 5.8 
  running in: guake inxi: 3.1.05 
1 Like

And… still happening with Nvidia Prime drivers, which is no real surprise. This time during a break when I wasn’t in front of the screen.

Same behavior; REISUB still does not reboot, requiring the hard reset, but the second soft reboot isn’t required after.

I’m now screen lock/blanking just to make sure that’s not related - not that it should be. Incedentally, a manual lock from gnome menus also turns off the keyboard backlight, which I think I already mentioned my issue does not.

Can you do me a favour and try creating a new user and log in there and see if it happens there as well???

:thinking:

Test 1A: CREATE NEW USER, screen always on/no timeout configured, allow sit on gnome terminal with htop. Network not connected. Pass, 14 hours.

Test 1B: no reboot, still with new user. Plug in ethernet, firefox youtube autoplay (no adblock). Fail < 1 hour

Test 2: Log in with New user, ethernet plugged in, chromium youtube autoplay (no adblock). Fail < 1 hour - screen freeze? That is, nothing responds, but the screen is actually on? That I can see of htop doesn’t show anything suspicious (it’s all chromium processes). Still, no visual responce from reisub.

Test 3: confirm reisub still works after clean boot. It does.

Test 4: Log in with New user, ethernet plugged in, do nothing except htop. no-reisub Freeze at uptime: 57:49 The caps lock key indicator is flashing?

Test 5A: Another networkless test. logged out half an hour in? Did not restart, uptime as half an hour. (X session died?)

Test 5B: logging in again, still no network. stable for 9:10.

Test 5C: Plugged in ethernet again. Stable for 1:30 more before safe shutdown.

  • Can you turn off WiFi when you perform the Ethernet test? (sounds like a hardware problem somewhere)…

  • What do the logs say?

    • Note time when problem happens

    • provide output to:

      journalctl --system --boot=0 --since --since "YYYY-MM-DD HH:MM:SS" --until "YYYY-MM-DD HH:MM:SS"
      

    where the value for --since is 15 seconds before and --until is 10 seconds after the problem happens.

Normal work, laptop was in airplane mode (no hardware switch), reisub apparently didn’t prevent a reset-then-soft reboot

So. This is presumably useless.

>>> journalctl --system --boot=0 --since "2020-10-26 12:38:00" --until "2020-10-26 12:39:00"                                                                                                                 [1]
-- Logs begin at Wed 2020-10-14 08:35:21 EDT, end at Mon 2020-10-26 12:41:49 EDT. --

If you rebooted, take boot=-1 instead of boot=0.

  • Does it show anything then?

:thinking:

For some reason I thought you were talking about a grub option… Ok, old journalctl entries.

boot=-2, the crashed boot, didn’t have anything for a full 7 minutes before 15:07
Oct 28 15:00:03 rtkit-daemon[1859]: Supervising 12 threads of 6 processes of 2 users

boot=-1, the failed restart, hung at
Oct 28 15:10:41 kernel: ucsi_acpi USBC000:00: PPM init failed (-110)

…which quick research seems to associate with the nvidia driver. So it’s back to Nouveau for now.

I have a 1770 (same chip generation as yours) and the 440 and since yesterday the 450 series seems to be working fine.

  • Print this page so you have it as a reference while in TTY2

  • Log off

  • Switch to TTY2 by pressing Ctrl+Alt+F2

  • Log in there

  • Execute:

    mhwd --listinstalled
    
  • Then for all lines of input above:

    sudo mhwd --remove pci OneLinePerDriver
    sudo mhwd --install pci video-nvidia-440xx #or 450, definitely not 455
    sudo reboot
    

Gone now?

I could not get any video-nvidia-440xx to work - even after blocking amdgpu. The screen just sits on a blinking underline when trying to start xorg.

/var/log/Xorg.0.log

[     5.012] (--) Log file renamed from "/var/log/Xorg.pid-1464.log" to "/var/log/Xorg.0.log"
[     5.012] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[     5.013] 
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[     5.013] Build Operating System: Linux Manjaro Linux
[     5.013] Current Operating System: Linux <filter>-TUF3 5.8.16-2-MANJARO #1 SMP PREEMPT Mon Oct 19 11:33:03 UTC 2020 x86_64
[     5.013] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8-x86_64 root=UUID=54fcf46e-8185-4998-9b0c-d104128658d6 rw quiet udev.log_priority=3
[     5.013] Build Date: 02 September 2020  07:39:17AM
[     5.013]  
[     5.013] Current version of pixman: 0.40.0
[     5.013] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.013] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.013] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 29 12:06:31 2020
[     5.013] (==) Using config file: "/etc/X11/xorg.conf"
[     5.013] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     5.013] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.015] (==) ServerLayout "layout"
[     5.015] (**) |-->Screen "Screen0" (0)
[     5.015] (**) |   |-->Monitor "Monitor0"
[     5.015] (**) |   |-->Device "Device0"
[     5.015] (**) |   |-->GPUDevice "Device0"
[     5.015] (==) Automatically adding devices
[     5.015] (==) Automatically enabling devices
[     5.015] (==) Automatically adding GPU devices
[     5.015] (==) Automatically binding GPU devices
[     5.015] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.015] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[     5.015] 	Entry deleted from font path.
[     5.015] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[     5.016] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[     5.016] 	Entry deleted from font path.
[     5.016] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[     5.016] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     5.016] 	Entry deleted from font path.
[     5.016] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     5.016] 	Entry deleted from font path.
[     5.016] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[     5.016] 	Entry deleted from font path.
[     5.016] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[     5.016] 	Entry deleted from font path.
[     5.016] (==) FontPath set to:
	
[     5.016] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.016] (**) Extension "COMPOSITE" is enabled
[     5.016] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.016] (II) Module ABI versions:
[     5.016] 	X.Org ANSI C Emulation: 0.4
[     5.016] 	X.Org Video Driver: 24.1
[     5.016] 	X.Org XInput driver : 24.1
[     5.016] 	X.Org Server Extension : 10.0
[     5.016] (++) using VT number 1

[     5.020] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[     5.022] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.022] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.1/0000:01:00.0/drm/card0
[     5.023] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[     5.023] (II) xfree86: Adding drm device (/dev/dri/card1)
[     5.023] (II) Platform probe for /sys/devices/pci0000:00/0000:00:08.1/0000:06:00.0/drm/card1
[     5.024] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 12 paused 0
[     5.027] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[     5.027] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[     5.030] (--) PCI: (1@0:0:0) 10de:2191:1043:16ff rev 161, Mem @ 0xfb000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x0000f000/128, BIOS @ 0x????????/524288
[     5.030] (--) PCI:*(6@0:0:0) 1002:1636:1043:16ff rev 198, Mem @ 0xd0000000/268435456, 0xe0000000/2097152, 0xfc500000/524288, I/O @ 0x0000c000/256
[     5.030] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     5.030] (II) LoadModule: "glx"
[     5.031] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.036] (II) Module glx: vendor="X.Org Foundation"
[     5.036] 	compiled for 1.20.9, module version = 1.0.0
[     5.036] 	ABI class: X.Org Server Extension, version 10.0
[     5.036] (II) LoadModule: "nvidia"
[     5.036] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     5.038] (II) Module nvidia: vendor="NVIDIA Corporation"
[     5.038] 	compiled for 1.6.99.901, module version = 1.0.0
[     5.038] 	Module class: X.Org Video Driver
[     5.038] (II) NVIDIA dlloader X Driver  440.100  Fri May 29 08:21:27 UTC 2020
[     5.038] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     5.039] (II) systemd-logind: releasing fd for 226:0
[     5.040] (II) Loading sub module "fb"
[     5.040] (II) LoadModule: "fb"
[     5.040] (II) Loading /usr/lib/xorg/modules/libfb.so
[     5.041] (II) Module fb: vendor="X.Org Foundation"
[     5.041] 	compiled for 1.20.9, module version = 1.0.0
[     5.041] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.041] (II) Loading sub module "wfb"
[     5.041] (II) LoadModule: "wfb"
[     5.041] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     5.042] (II) Module wfb: vendor="X.Org Foundation"
[     5.042] 	compiled for 1.20.9, module version = 1.0.0
[     5.042] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.042] (II) Loading sub module "ramdac"
[     5.042] (II) LoadModule: "ramdac"
[     5.042] (II) Module "ramdac" already built-in
[     5.043] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[     5.043] (==) NVIDIA(0): RGB weight 888
[     5.043] (==) NVIDIA(0): Default visual is TrueColor
[     5.043] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     5.043] (**) Option "AllowNVIDIAGpuScreens"
[     5.043] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[     5.043] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[     5.043] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[     5.043] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP-0"
[     5.043] (**) NVIDIA(0): Option "MetaModes" "1920x1080"
[     5.043] (**) NVIDIA(0): Enabling 2D acceleration
[     5.043] (**) NVIDIA(0): ConnectedMonitor string: "DFP-0"
[     5.043] (II) Loading sub module "glxserver_nvidia"
[     5.043] (II) LoadModule: "glxserver_nvidia"
[     5.043] (II) Loading /usr/lib/xorg/modules/extensions/libglxserver_nvidia.so
[     5.061] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[     5.061] 	compiled for 1.6.99.901, module version = 1.0.0
[     5.061] 	Module class: X.Org Server Extension
[     5.061] (II) NVIDIA GLX Module  440.100  Fri May 29 08:19:01 UTC 2020
[     5.062] (II) NVIDIA: The X server supports PRIME Render Offload.
[     5.782] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[     5.782] (--) NVIDIA(0):     DFP-0
[     5.782] (--) NVIDIA(0):     DFP-1
[     5.782] (**) NVIDIA(0): Using ConnectedMonitor string "DFP-0".
[     5.783] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1660 Ti (TU116-A) at PCI:1:0:0 (GPU-0)
[     5.783] (--) NVIDIA(0): Memory: 6291456 kBytes
[     5.783] (--) NVIDIA(0): VideoBIOS: 90.16.4d.00.64
[     5.783] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     5.793] (--) NVIDIA(GPU-0): DFP-0: connected
[     5.793] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[     5.793] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[     5.793] (--) NVIDIA(GPU-0): 
[     5.793] (--) NVIDIA(GPU-0): DFP-1: disconnected
[     5.793] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[     5.793] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[     5.793] (--) NVIDIA(GPU-0): 
[     5.832] (WW) NVIDIA(0): No valid modes for "1920x1080"; removing.
[     5.832] (WW) NVIDIA(0): 
[     5.832] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[     5.832] (WW) NVIDIA(0):     "nvidia-auto-select".
[     5.832] (WW) NVIDIA(0): 
[     5.834] (II) NVIDIA(0): Validated MetaModes:
[     5.834] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[     5.834] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[     5.921] (WW) NVIDIA(0): DFP-0 does not have an EDID, or its EDID does not contain a
[     5.921] (WW) NVIDIA(0):     maximum image size; cannot compute DPI from DFP-0's EDID.
[     5.921] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[     5.921] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[     5.921] (II) NVIDIA:     access.
[     5.931] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     5.931] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     5.931] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     5.931] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     5.931] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     5.931] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     5.931] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     5.931] (II) NVIDIA(0):     Config Options in the README.
[     6.031] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[     6.118] (==) NVIDIA(0): Disabling shared memory pixmaps
[     6.118] (==) NVIDIA(0): Backing store enabled
[     6.118] (==) NVIDIA(0): Silken mouse disabled
[     6.118] (**) NVIDIA(0): DPMS enabled
[     6.118] (WW) NVIDIA(0): Option "NoLogo" is not used
[     6.118] (II) Loading sub module "dri2"
[     6.118] (II) LoadModule: "dri2"
[     6.118] (II) Module "dri2" already built-in
[     6.119] (II) NVIDIA(0): [DRI2] Setup complete
[     6.119] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     6.119] (II) Initializing extension Generic Event Extension
[     6.119] (II) Initializing extension SHAPE
[     6.119] (II) Initializing extension MIT-SHM
[     6.119] (II) Initializing extension XInputExtension
[     6.119] (II) Initializing extension XTEST
[     6.119] (II) Initializing extension BIG-REQUESTS
[     6.119] (II) Initializing extension SYNC
[     6.119] (II) Initializing extension XKEYBOARD
[     6.119] (II) Initializing extension XC-MISC
[     6.119] (II) Initializing extension SECURITY
[     6.119] (II) Initializing extension XFIXES
[     6.119] (II) Initializing extension RENDER
[     6.119] (II) Initializing extension RANDR
[     6.119] (II) Initializing extension COMPOSITE
[     6.119] (II) Initializing extension DAMAGE
[     6.119] (II) Initializing extension MIT-SCREEN-SAVER
[     6.119] (II) Initializing extension DOUBLE-BUFFER
[     6.119] (II) Initializing extension RECORD
[     6.119] (II) Initializing extension DPMS
[     6.119] (II) Initializing extension Present
[     6.119] (II) Initializing extension DRI3
[     6.119] (II) Initializing extension X-Resource
[     6.119] (II) Initializing extension XVideo
[     6.119] (II) Initializing extension XVideo-MotionCompensation
[     6.119] (II) Initializing extension GLX
[     6.119] (II) Initializing extension GLX
[     6.119] (II) Indirect GLX disabled.
[     6.119] (II) GLX: Another vendor is already registered for screen 0
[     6.119] (II) Initializing extension XFree86-VidModeExtension
[     6.119] (II) Initializing extension XFree86-DGA
[     6.119] (II) Initializing extension XFree86-DRI
[     6.119] (II) Initializing extension DRI2
[     6.119] (II) Initializing extension NV-GLX
[     6.119] (II) Initializing extension NV-CONTROL
[     6.119] (II) Initializing extension XINERAMA
[     6.151] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     6.151] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.151] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.151] (**) Power Button: Applying InputClass "system-keyboard"
[     6.151] (**) Power Button: Applying InputClass "Keyboard Defaults"
[     6.151] (II) LoadModule: "libinput"
[     6.151] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     6.153] (II) Module libinput: vendor="X.Org Foundation"
[     6.153] 	compiled for 1.20.8, module version = 0.30.0
[     6.153] 	Module class: X.Org XInput Driver
[     6.153] 	ABI class: X.Org XInput driver, version 24.1
[     6.153] (II) Using input driver 'libinput' for 'Power Button'
[     6.154] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 34 paused 0
[     6.155] (**) Power Button: always reports core events
[     6.155] (**) Option "Device" "/dev/input/event3"
[     6.155] (**) Option "_source" "server/udev"
[     6.159] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     6.159] (II) event3  - Power Button: device is a keyboard
[     6.159] (II) event3  - Power Button: device removed
[     6.159] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[     6.159] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.159] (**) Option "xkb_model" "pc105"
[     6.159] (**) Option "xkb_layout" "us"
[     6.159] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     6.170] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     6.170] (II) event3  - Power Button: device is a keyboard
[     6.170] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event6)
[     6.170] (**) Asus Wireless Radio Control: Applying InputClass "evdev keyboard catchall"
[     6.170] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[     6.170] (**) Asus Wireless Radio Control: Applying InputClass "system-keyboard"
[     6.170] (**) Asus Wireless Radio Control: Applying InputClass "Keyboard Defaults"
[     6.170] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[     6.171] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 37 paused 0
[     6.171] (**) Asus Wireless Radio Control: always reports core events
[     6.171] (**) Option "Device" "/dev/input/event6"
[     6.171] (**) Option "_source" "server/udev"
[     6.172] (II) event6  - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[     6.172] (II) event6  - Asus Wireless Radio Control: device is a keyboard
[     6.172] (II) event6  - Asus Wireless Radio Control: device removed
[     6.172] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input6/event6"
[     6.172] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[     6.172] (**) Option "xkb_model" "pc105"
[     6.172] (**) Option "xkb_layout" "us"
[     6.172] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     6.172] (II) event6  - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[     6.172] (II) event6  - Asus Wireless Radio Control: device is a keyboard
[     6.173] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[     6.173] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     6.173] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.173] (**) Video Bus: Applying InputClass "system-keyboard"
[     6.173] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[     6.173] (II) Using input driver 'libinput' for 'Video Bus'
[     6.174] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 38 paused 0
[     6.174] (**) Video Bus: always reports core events
[     6.174] (**) Option "Device" "/dev/input/event4"
[     6.174] (**) Option "_source" "server/udev"
[     6.174] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[     6.174] (II) event4  - Video Bus: device is a keyboard
[     6.174] (II) event4  - Video Bus: device removed
[     6.174] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/LNXVIDEO:00/input/input4/event4"
[     6.174] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     6.174] (**) Option "xkb_model" "pc105"
[     6.174] (**) Option "xkb_layout" "us"
[     6.174] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     6.175] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[     6.175] (II) event4  - Video Bus: device is a keyboard
[     6.176] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     6.176] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.176] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.176] (**) Power Button: Applying InputClass "system-keyboard"
[     6.176] (**) Power Button: Applying InputClass "Keyboard Defaults"
[     6.176] (II) Using input driver 'libinput' for 'Power Button'
[     6.176] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 39 paused 0
[     6.176] (**) Power Button: always reports core events
[     6.176] (**) Option "Device" "/dev/input/event0"
[     6.176] (**) Option "_source" "server/udev"
[     6.177] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     6.177] (II) event0  - Power Button: device is a keyboard
[     6.177] (II) event0  - Power Button: device removed
[     6.177] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[     6.177] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[     6.177] (**) Option "xkb_model" "pc105"
[     6.177] (**) Option "xkb_layout" "us"
[     6.177] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     6.178] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     6.178] (II) event0  - Power Button: device is a keyboard
[     6.178] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[     6.178] (II) No input driver specified, ignoring this device.
[     6.178] (II) This device may have been added with another device file.
[     6.178] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[     6.178] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     6.178] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     6.178] (**) Sleep Button: Applying InputClass "system-keyboard"
[     6.178] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
[     6.178] (II) Using input driver 'libinput' for 'Sleep Button'
[     6.179] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 40 paused 0
[     6.179] (**) Sleep Button: always reports core events
[     6.179] (**) Option "Device" "/dev/input/event1"
[     6.179] (**) Option "_source" "server/udev"
[     6.180] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[     6.180] (II) event1  - Sleep Button: device is a keyboard
[     6.180] (II) event1  - Sleep Button: device removed
[     6.180] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[     6.180] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[     6.180] (**) Option "xkb_model" "pc105"
[     6.180] (**) Option "xkb_layout" "us"
[     6.180] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     6.181] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[     6.181] (II) event1  - Sleep Button: device is a keyboard
[     6.181] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
[     6.181] (II) No input driver specified, ignoring this device.
[     6.181] (II) This device may have been added with another device file.
[     6.181] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
[     6.181] (II) No input driver specified, ignoring this device.
[     6.181] (II) This device may have been added with another device file.
[     6.181] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[     6.181] (II) No input driver specified, ignoring this device.
[     6.181] (II) This device may have been added with another device file.
[     6.182] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event9)
[     6.182] (II) No input driver specified, ignoring this device.
[     6.182] (II) This device may have been added with another device file.
[     6.182] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event8)
[     6.182] (II) No input driver specified, ignoring this device.
[     6.182] (II) This device may have been added with another device file.
[     6.182] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event18)
[     6.182] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[     6.182] (**) Logitech USB Laser Mouse: Applying InputClass "libinput pointer catchall"
[     6.182] (II) Using input driver 'libinput' for 'Logitech USB Laser Mouse'
[     6.237] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 41 paused 0
[     6.237] (**) Logitech USB Laser Mouse: always reports core events
[     6.237] (**) Option "Device" "/dev/input/event18"
[     6.237] (**) Option "_source" "server/udev"
[     6.240] (II) event18 - Logitech USB Laser Mouse: is tagged by udev as: Mouse
[     6.240] (II) event18 - Logitech USB Laser Mouse: device set to 1000 DPI
[     6.240] (II) event18 - Logitech USB Laser Mouse: device is a pointer
[     6.240] (II) event18 - Logitech USB Laser Mouse: device removed
[     6.240] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb3/3-2/3-2.3/3-2.3:1.0/0003:046D:C069.0002/input/input20/event18"
[     6.240] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id 11)
[     6.241] (**) Option "AccelerationScheme" "none"
[     6.241] (**) Logitech USB Laser Mouse: (accel) selected scheme none/0
[     6.241] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[     6.241] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[     6.243] (II) event18 - Logitech USB Laser Mouse: is tagged by udev as: Mouse
[     6.243] (II) event18 - Logitech USB Laser Mouse: device set to 1000 DPI
[     6.243] (II) event18 - Logitech USB Laser Mouse: device is a pointer
[     6.244] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse2)
[     6.244] (II) No input driver specified, ignoring this device.
[     6.244] (II) This device may have been added with another device file.
[     6.245] (II) config/udev: Adding input device Keyed Up Labs ES-87 (/dev/input/event19)
[     6.246] (**) Keyed Up Labs ES-87: Applying InputClass "evdev keyboard catchall"
[     6.246] (**) Keyed Up Labs ES-87: Applying InputClass "libinput keyboard catchall"
[     6.246] (**) Keyed Up Labs ES-87: Applying InputClass "system-keyboard"
[     6.246] (**) Keyed Up Labs ES-87: Applying InputClass "Keyboard Defaults"
[     6.246] (II) Using input driver 'libinput' for 'Keyed Up Labs ES-87'
[     6.247] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 42 paused 0
[     6.247] (**) Keyed Up Labs ES-87: always reports core events
[     6.247] (**) Option "Device" "/dev/input/event19"
[     6.247] (**) Option "_source" "server/udev"
[     6.249] (II) event19 - Keyed Up Labs ES-87: is tagged by udev as: Keyboard
[     6.249] (II) event19 - Keyed Up Labs ES-87: device is a keyboard
[     6.250] (II) event19 - Keyed Up Labs ES-87: device removed
[     6.250] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb3/3-2/3-2.4/3-2.4:1.0/0003:04D9:A0CE.0003/input/input21/event19"
[     6.250] (II) XINPUT: Adding extended input device "Keyed Up Labs ES-87" (type: KEYBOARD, id 12)
[     6.250] (**) Option "xkb_model" "pc105"
[     6.250] (**) Option "xkb_layout" "us"
[     6.250] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     6.252] (II) event19 - Keyed Up Labs ES-87: is tagged by udev as: Keyboard
[     6.253] (II) event19 - Keyed Up Labs ES-87: device is a keyboard
[     6.254] (II) config/udev: Adding input device Keyed Up Labs ES-87 Keyboard (/dev/input/event20)
[     6.254] (**) Keyed Up Labs ES-87 Keyboard: Applying InputClass "evdev keyboard catchall"
[     6.254] (**) Keyed Up Labs ES-87 Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.254] (**) Keyed Up Labs ES-87 Keyboard: Applying InputClass "system-keyboard"
[     6.254] (**) Keyed Up Labs ES-87 Keyboard: Applying InputClass "Keyboard Defaults"
[     6.254] (II) Using input driver 'libinput' for 'Keyed Up Labs ES-87 Keyboard'
[     6.256] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 43 paused 0
[     6.256] (**) Keyed Up Labs ES-87 Keyboard: always reports core events
[     6.256] (**) Option "Device" "/dev/input/event20"
[     6.256] (**) Option "_source" "server/udev"
[     6.258] (II) event20 - Keyed Up Labs ES-87 Keyboard: is tagged by udev as: Keyboard
[     6.258] (II) event20 - Keyed Up Labs ES-87 Keyboard: device is a keyboard
[     6.258] (II) event20 - Keyed Up Labs ES-87 Keyboard: device removed
[     6.258] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb3/3-2/3-2.4/3-2.4:1.1/0003:04D9:A0CE.0004/input/input22/event20"
[     6.258] (II) XINPUT: Adding extended input device "Keyed Up Labs ES-87 Keyboard" (type: KEYBOARD, id 13)
[     6.258] (**) Option "xkb_model" "pc105"
[     6.258] (**) Option "xkb_layout" "us"
[     6.258] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     6.261] (II) event20 - Keyed Up Labs ES-87 Keyboard: is tagged by udev as: Keyboard
[     6.261] (II) event20 - Keyed Up Labs ES-87 Keyboard: device is a keyboard
[     6.262] (II) config/udev: Adding input device Keyed Up Labs ES-87 Consumer Control (/dev/input/event21)
[     6.262] (**) Keyed Up Labs ES-87 Consumer Control: Applying InputClass "evdev keyboard catchall"
[     6.262] (**) Keyed Up Labs ES-87 Consumer Control: Applying InputClass "libinput keyboard catchall"
[     6.262] (**) Keyed Up Labs ES-87 Consumer Control: Applying InputClass "system-keyboard"
[     6.263] (**) Keyed Up Labs ES-87 Consumer Control: Applying InputClass "Keyboard Defaults"
[     6.263] (II) Using input driver 'libinput' for 'Keyed Up Labs ES-87 Consumer Control'
[     6.264] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 44 paused 0
[     6.264] (**) Keyed Up Labs ES-87 Consumer Control: always reports core events
[     6.264] (**) Option "Device" "/dev/input/event21"
[     6.264] (**) Option "_source" "server/udev"
[     6.266] (II) event21 - Keyed Up Labs ES-87 Consumer Control: is tagged by udev as: Keyboard
[     6.267] (II) event21 - Keyed Up Labs ES-87 Consumer Control: device is a keyboard
[     6.267] (II) event21 - Keyed Up Labs ES-87 Consumer Control: device removed
[     6.267] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb3/3-2/3-2.4/3-2.4:1.1/0003:04D9:A0CE.0004/input/input23/event21"
[     6.267] (II) XINPUT: Adding extended input device "Keyed Up Labs ES-87 Consumer Control" (type: KEYBOARD, id 14)
[     6.267] (**) Option "xkb_model" "pc105"
[     6.267] (**) Option "xkb_layout" "us"
[     6.267] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     6.270] (II) event21 - Keyed Up Labs ES-87 Consumer Control: is tagged by udev as: Keyboard
[     6.270] (II) event21 - Keyed Up Labs ES-87 Consumer Control: device is a keyboard
[     6.271] (II) config/udev: Adding input device Yubico Yubikey NEO OTP (/dev/input/event22)
[     6.271] (**) Yubico Yubikey NEO OTP: Applying InputClass "evdev keyboard catchall"
[     6.271] (**) Yubico Yubikey NEO OTP: Applying InputClass "libinput keyboard catchall"
[     6.271] (**) Yubico Yubikey NEO OTP: Applying InputClass "system-keyboard"
[     6.271] (**) Yubico Yubikey NEO OTP: Applying InputClass "Keyboard Defaults"
[     6.271] (II) Using input driver 'libinput' for 'Yubico Yubikey NEO OTP'
[     6.273] (II) systemd-logind: got fd for /dev/input/event22 13:86 fd 45 paused 0
[     6.273] (**) Yubico Yubikey NEO OTP: always reports core events
[     6.273] (**) Option "Device" "/dev/input/event22"
[     6.273] (**) Option "_source" "server/udev"
[     6.275] (II) event22 - Yubico Yubikey NEO OTP: is tagged by udev as: Keyboard
[     6.275] (II) event22 - Yubico Yubikey NEO OTP: device is a keyboard
[     6.275] (II) event22 - Yubico Yubikey NEO OTP: device removed
[     6.275] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb3/3-3/3-3.2/3-3.2:1.0/0003:1050:0110.0005/input/input24/event22"
[     6.275] (II) XINPUT: Adding extended input device "Yubico Yubikey NEO OTP" (type: KEYBOARD, id 15)
[     6.275] (**) Option "xkb_model" "pc105"
[     6.275] (**) Option "xkb_layout" "us"
[     6.275] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     6.278] (II) event22 - Yubico Yubikey NEO OTP: is tagged by udev as: Keyboard
[     6.278] (II) event22 - Yubico Yubikey NEO OTP: device is a keyboard
[     6.279] (II) config/udev: Adding input device USB2.0 HD UVC WebCam: USB2.0 HD (/dev/input/event17)
[     6.279] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "evdev keyboard catchall"
[     6.279] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "libinput keyboard catchall"
[     6.280] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "system-keyboard"
[     6.280] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "Keyboard Defaults"
[     6.280] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam: USB2.0 HD'
[     6.281] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 46 paused 0
[     6.281] (**) USB2.0 HD UVC WebCam: USB2.0 HD: always reports core events
[     6.281] (**) Option "Device" "/dev/input/event17"
[     6.281] (**) Option "_source" "server/udev"
[     6.283] (II) event17 - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[     6.283] (II) event17 - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[     6.284] (II) event17 - USB2.0 HD UVC WebCam: USB2.0 HD: device removed
[     6.284] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb3/3-4/3-4:1.0/input/input19/event17"
[     6.284] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam: USB2.0 HD" (type: KEYBOARD, id 16)
[     6.284] (**) Option "xkb_model" "pc105"
[     6.284] (**) Option "xkb_layout" "us"
[     6.284] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     6.286] (II) event17 - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[     6.286] (II) event17 - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[     6.286] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event13)
[     6.286] (II) No input driver specified, ignoring this device.
[     6.286] (II) This device may have been added with another device file.
[     6.287] (II) config/udev: Adding input device ELAN1203:00 04F3:307A Mouse (/dev/input/event15)
[     6.287] (**) ELAN1203:00 04F3:307A Mouse: Applying InputClass "evdev pointer catchall"
[     6.287] (**) ELAN1203:00 04F3:307A Mouse: Applying InputClass "libinput pointer catchall"
[     6.287] (II) Using input driver 'libinput' for 'ELAN1203:00 04F3:307A Mouse'
[     6.288] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 47 paused 0
[     6.288] (**) ELAN1203:00 04F3:307A Mouse: always reports core events
[     6.288] (**) Option "Device" "/dev/input/event15"
[     6.288] (**) Option "_source" "server/udev"
[     6.290] (II) event15 - ELAN1203:00 04F3:307A Mouse: is tagged by udev as: Mouse Pointingstick
[     6.290] (II) event15 - ELAN1203:00 04F3:307A Mouse: device is a pointer
[     6.291] (II) event15 - ELAN1203:00 04F3:307A Mouse: device removed
[     6.291] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:03/i2c-0/i2c-ELAN1203:00/0018:04F3:307A.0001/input/input17/event15"
[     6.291] (II) XINPUT: Adding extended input device "ELAN1203:00 04F3:307A Mouse" (type: MOUSE, id 17)
[     6.292] (**) Option "AccelerationScheme" "none"
[     6.292] (**) ELAN1203:00 04F3:307A Mouse: (accel) selected scheme none/0
[     6.292] (**) ELAN1203:00 04F3:307A Mouse: (accel) acceleration factor: 2.000
[     6.292] (**) ELAN1203:00 04F3:307A Mouse: (accel) acceleration threshold: 4
[     6.293] (II) event15 - ELAN1203:00 04F3:307A Mouse: is tagged by udev as: Mouse Pointingstick
[     6.293] (II) event15 - ELAN1203:00 04F3:307A Mouse: device is a pointer
[     6.295] (II) config/udev: Adding input device ELAN1203:00 04F3:307A Mouse (/dev/input/mouse0)
[     6.295] (II) No input driver specified, ignoring this device.
[     6.295] (II) This device may have been added with another device file.
[     6.296] (II) config/udev: Adding input device ELAN1203:00 04F3:307A Touchpad (/dev/input/event16)
[     6.296] (**) ELAN1203:00 04F3:307A Touchpad: Applying InputClass "evdev touchpad catchall"
[     6.296] (**) ELAN1203:00 04F3:307A Touchpad: Applying InputClass "libinput touchpad catchall"
[     6.296] (II) Using input driver 'libinput' for 'ELAN1203:00 04F3:307A Touchpad'
[     6.298] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 48 paused 0
[     6.298] (**) ELAN1203:00 04F3:307A Touchpad: always reports core events
[     6.298] (**) Option "Device" "/dev/input/event16"
[     6.298] (**) Option "_source" "server/udev"
[     6.299] (II) event16 - ELAN1203:00 04F3:307A Touchpad: is tagged by udev as: Touchpad
[     6.300] (II) event16 - ELAN1203:00 04F3:307A Touchpad: device is a touchpad
[     6.301] (II) event16 - ELAN1203:00 04F3:307A Touchpad: device removed
[     6.301] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:03/i2c-0/i2c-ELAN1203:00/0018:04F3:307A.0001/input/input18/event16"
[     6.301] (II) XINPUT: Adding extended input device "ELAN1203:00 04F3:307A Touchpad" (type: TOUCHPAD, id 18)
[     6.302] (**) Option "AccelerationScheme" "none"
[     6.302] (**) ELAN1203:00 04F3:307A Touchpad: (accel) selected scheme none/0
[     6.302] (**) ELAN1203:00 04F3:307A Touchpad: (accel) acceleration factor: 2.000
[     6.302] (**) ELAN1203:00 04F3:307A Touchpad: (accel) acceleration threshold: 4
[     6.303] (II) event16 - ELAN1203:00 04F3:307A Touchpad: is tagged by udev as: Touchpad
[     6.305] (II) event16 - ELAN1203:00 04F3:307A Touchpad: device is a touchpad
[     6.306] (II) config/udev: Adding input device ELAN1203:00 04F3:307A Touchpad (/dev/input/mouse1)
[     6.306] (II) No input driver specified, ignoring this device.
[     6.306] (II) This device may have been added with another device file.
[     6.307] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event14)
[     6.307] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     6.307] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     6.307] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[     6.307] (**) Asus WMI hotkeys: Applying InputClass "Keyboard Defaults"
[     6.307] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[     6.308] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 49 paused 0
[     6.308] (**) Asus WMI hotkeys: always reports core events
[     6.308] (**) Option "Device" "/dev/input/event14"
[     6.308] (**) Option "_source" "server/udev"
[     6.310] (II) event14 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[     6.310] (II) event14 - Asus WMI hotkeys: device is a keyboard
[     6.310] (II) event14 - Asus WMI hotkeys: device removed
[     6.310] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input16/event14"
[     6.310] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 19)
[     6.310] (**) Option "xkb_model" "pc105"
[     6.310] (**) Option "xkb_layout" "us"
[     6.310] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     6.312] (II) event14 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[     6.312] (II) event14 - Asus WMI hotkeys: device is a keyboard
[     6.313] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[     6.313] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     6.313] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     6.313] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[     6.313] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[     6.313] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     6.314] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 50 paused 0
[     6.314] (**) AT Translated Set 2 keyboard: always reports core events
[     6.314] (**) Option "Device" "/dev/input/event5"
[     6.314] (**) Option "_source" "server/udev"
[     6.315] (II) event5  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     6.316] (II) event5  - AT Translated Set 2 keyboard: device is a keyboard
[     6.317] (II) event5  - AT Translated Set 2 keyboard: device removed
[     6.317] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[     6.317] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 20)
[     6.317] (**) Option "xkb_model" "pc105"
[     6.317] (**) Option "xkb_layout" "us"
[     6.317] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     6.318] (II) event5  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     6.319] (II) event5  - AT Translated Set 2 keyboard: device is a keyboard
[     6.321] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[     6.321] (II) No input driver specified, ignoring this device.
[     6.321] (II) This device may have been added with another device file.
[     6.690] (--) NVIDIA(GPU-0): DFP-0: connected
[     6.690] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[     6.690] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[     6.690] (--) NVIDIA(GPU-0): 
[     6.691] (--) NVIDIA(GPU-0): DFP-1: disconnected
[     6.691] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[     6.691] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[     6.691] (--) NVIDIA(GPU-0): 
[    14.012] (**) Option "fd" "34"
[    14.012] (II) event3  - Power Button: device removed
[    14.013] (**) Option "fd" "37"
[    14.013] (II) event6  - Asus Wireless Radio Control: device removed
[    14.013] (**) Option "fd" "38"
[    14.013] (II) event4  - Video Bus: device removed
[    14.013] (**) Option "fd" "39"
[    14.013] (II) event0  - Power Button: device removed
[    14.014] (**) Option "fd" "40"
[    14.014] (II) event1  - Sleep Button: device removed
[    14.014] (**) Option "fd" "41"
[    14.014] (II) event18 - Logitech USB Laser Mouse: device removed
[    14.014] (**) Option "fd" "42"
[    14.014] (II) event19 - Keyed Up Labs ES-87: device removed
[    14.015] (**) Option "fd" "43"
[    14.015] (II) event20 - Keyed Up Labs ES-87 Keyboard: device removed
[    14.015] (**) Option "fd" "44"
[    14.015] (II) event21 - Keyed Up Labs ES-87 Consumer Control: device removed
[    14.015] (**) Option "fd" "45"
[    14.015] (II) event22 - Yubico Yubikey NEO OTP: device removed
[    14.015] (**) Option "fd" "46"
[    14.015] (II) event17 - USB2.0 HD UVC WebCam: USB2.0 HD: device removed
[    14.016] (**) Option "fd" "47"
[    14.016] (II) event15 - ELAN1203:00 04F3:307A Mouse: device removed
[    14.016] (**) Option "fd" "48"
[    14.016] (II) event16 - ELAN1203:00 04F3:307A Touchpad: device removed
[    14.016] (**) Option "fd" "49"
[    14.016] (II) event14 - Asus WMI hotkeys: device removed
[    14.017] (**) Option "fd" "50"
[    14.017] (II) event5  - AT Translated Set 2 keyboard: device removed
[    14.139] (II) systemd-logind: got pause for 13:69
[    14.139] (II) systemd-logind: got pause for 13:65
[    14.139] (II) systemd-logind: got pause for 13:84
[    14.139] (II) systemd-logind: got pause for 13:82
[    14.139] (II) systemd-logind: got pause for 226:1
[    14.139] (II) systemd-logind: got pause for 13:79
[    14.139] (II) systemd-logind: got pause for 13:86
[    14.139] (II) systemd-logind: got pause for 13:67
[    14.139] (II) systemd-logind: got pause for 13:81
[    14.139] (II) systemd-logind: got pause for 13:83
[    14.139] (II) systemd-logind: got pause for 13:78
[    14.139] (II) systemd-logind: got pause for 13:68
[    14.139] (II) systemd-logind: got pause for 13:85
[    14.139] (II) systemd-logind: got pause for 13:70
[    14.139] (II) systemd-logind: got pause for 13:64
[    14.139] (II) systemd-logind: got pause for 13:80
[   127.161] (II) UnloadModule: "libinput"
[   127.161] (II) systemd-logind: releasing fd for 13:69
[   127.227] (II) UnloadModule: "libinput"
[   127.227] (II) systemd-logind: releasing fd for 13:78
[   127.307] (II) UnloadModule: "libinput"
[   127.307] (II) systemd-logind: releasing fd for 13:80
[   127.364] (II) UnloadModule: "libinput"
[   127.364] (II) systemd-logind: releasing fd for 13:79
[   127.444] (II) UnloadModule: "libinput"
[   127.444] (II) systemd-logind: releasing fd for 13:81
[   127.524] (II) UnloadModule: "libinput"
[   127.524] (II) systemd-logind: releasing fd for 13:86
[   127.611] (II) UnloadModule: "libinput"
[   127.611] (II) systemd-logind: releasing fd for 13:85
[   127.711] (II) UnloadModule: "libinput"
[   127.711] (II) systemd-logind: releasing fd for 13:84
[   127.738] (II) UnloadModule: "libinput"
[   127.738] (II) systemd-logind: releasing fd for 13:83
[   127.845] (II) UnloadModule: "libinput"
[   127.845] (II) systemd-logind: releasing fd for 13:82
[   127.925] (II) UnloadModule: "libinput"
[   127.925] (II) systemd-logind: releasing fd for 13:65
[   127.978] (II) UnloadModule: "libinput"
[   127.978] (II) systemd-logind: releasing fd for 13:64
[   128.031] (II) UnloadModule: "libinput"
[   128.031] (II) systemd-logind: releasing fd for 13:68
[   128.098] (II) UnloadModule: "libinput"
[   128.098] (II) systemd-logind: releasing fd for 13:70
[   128.165] (II) UnloadModule: "libinput"
[   128.165] (II) systemd-logind: releasing fd for 13:67
[   128.363] (II) NVIDIA(GPU-0): Deleting GPU-0
[   128.363] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[   128.363] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[   128.363] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[   128.364] (II) Server terminated successfully (0). Closing log file.

I’m trying the 5.9 kernel with noveau next

…And still crashing.

At this point, I’ve backed up, blown it away, and done a clean install with free drivers.

1 Like

I was on Ububtu 20.10 for a bit and still got the same crash.

Now I’m back on Manjaro, and downgraded to the memory it shipped with. No crashes yet, but definitely need more time to call it stable.

(later) Still need to do an overnight test, but I’m hopeful. I’m back on the nvidia prime driver.

Note:

sudo /etc/default/grub

GRUB_CMDLINE_LINUX_DEFAULT="acpi_backlight=vendor sysrq_always_enabled=1"

sudo update-grub

apparently gets rid of the ‘loading backlight’ error I’ve seen during most boots.

Original memory… passed my stability tests.

Individually testing the SODIMMs of my 64GB upgrade kit still has fatal stability issues. Separately tested, one seems to be associated with the black screen freeze, the other with the blinking caps lock freeze.

I’m spending a bit more time with them to 100% confirm it’s not a motherboard defect before RMA.

Fabby, thank you for your help.

1 Like

I was still reading this. If you want to ping someone in the future, use @Sudrien, @Fabby, …

Linking to someone’s profile won’t ping them.

:stuck_out_tongue_winking_eye:

1 Like

I seem to have my solution, provided by https://www.reddit.com/r/ASUS/comments/g53yg5/new_asus_tuf_a15_amd_4800h_not_running_advertised/ - a sister model to my Tuf A17 FA706IU

The Crucal bl2k32g32c16s4b 64 GB kit I tried is rated at 1.35 Volts. While a

sudo dmidecode -t  17

confirmed it was being run a 1.20V … some unidentified process as of 5.9.3-1-MANJARO was still causing an occasional undervoltage.

As of installing the HyperX HX432S20IBK2/64 kit, I have had no stability issues, black screens or kernel panics for a 12 hour session.

1 Like

This topic was automatically closed 15 days after the last reply. New replies are no longer allowed.