Black screen in Manjaro

I rolled up manjaro for myself, only during installation I reinstall the view mode from the video card to the assembly in the BIOS and then I already installed it.
It will also boot with the built-in, there I installed the video-nvidia driver and there was also the video-hybrid-intel-nvidia-470xx-prime driver.

After I installed the nvidia video driver, a black screen appeared.
Also with the video-nvidia-470xx driver.

I don’t understand why this is happening at all. :saluting_face:

My pc -
Nvidia Geforce RTX 2060/
Intel(R) Core™ i7-2600 CPU @ 3.40GHz

can you share your kernel version. My guess is you need to do ibt=off. to successfully boot into the system.

sudo nano /etc/default/grub
just append ibt=off in GRUB_CMDLINE_LINUX_DEFAULT
sudo update-grub

can you report

you can can boot on USB manjaro
open a terminal and a browser on this topic

inxi -Fza
sudo manjaro-chroot -a
mhwd-kernel -li
mhwd -li
exit (end of chroot )

have you tried older kernel like linux 515 LTS or linux 5.10 LTS ?

You have a hybrid system.
Unless you have disabled the intel card (such as in the BIOS), you will want to be using the hybrid driver profile.

GRUB_CMDLINE_LINUX_DEFAULT="quiet ibt=off splash apparmor=1 security=apparmor

No,didn’t try

Currently running: 6.1.25-1-MANJARO (linux61)
The following kernels are installed in your system:

  • linux61
[manjaro@manjaro Desktop]$ inxi -Fza
  Kernel: 6.1.25-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
    parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC
    misobasedir=manjaro misolabel=MANJARO_XFCE_2210 quiet
    systemd.show_status=1 splash apparmor=1 security=apparmor driver=free
    nouveau.modeset=1 i915.modeset=1 radeon.modeset=1
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm
    v: 4.18.0 vt: 7 dm: LightDM v: 1.32.0 Distro: Manjaro Linux base: Arch Linux
  Type: Desktop Mobo: MSI model: Z77IA-E53 (MS-7733) v: 2.0
    serial: <superuser required> UEFI: American Megatrends v: 10.5
    date: 10/30/2013
  Info: model: Intel Core i7-2600 bits: 64 type: MT MCP arch: Sandy Bridge
    gen: core 2 level: v2 built: 2010-12 process: Intel 32nm family: 6
    model-id: 0x2A (42) stepping: 7 microcode: 0x2F
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
    L3: 8 MiB desc: 1x8 MiB
  Speed (MHz): avg: 1875 high: 3800 min/max: 1600/3800 scaling:
    driver: intel_cpufreq governor: schedutil cores: 1: 3800 2: 1600 3: 1600
    4: 1600 5: 1600 6: 1600 7: 1600 8: 1600 bogomips: 54417
  Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: retbleed status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
    STIBP: conditional, RSB filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
  Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics
    vendor: Micro-Star MSI driver: i915 v: kernel arch: Gen-6 code: Sandybridge
    process: Intel 32nm built: 2011 ports: active: HDMI-A-1 empty: DP-1,VGA-1
    bus-ID: 00:02.0 chip-ID: 8086:0102 class-ID: 0300
  Device-2: NVIDIA TU104 [GeForce RTX 2060] vendor:
    driver: nouveau v: kernel non-free: 530.xx+ status: current (as of 2023-03)
    arch: Turing code: TUxxx process: TSMC 12nm FF built: 2018-22 pcie: gen: 2
    speed: 5 GT/s lanes: 16 link-max: gen: 3 speed: 8 GT/s ports: active: none
    empty: DP-2,DVI-D-1,HDMI-A-2 bus-ID: 01:00.0 chip-ID: 10de:1e89
    class-ID: 0300 temp: 28.0 C
  Display: x11 server: X.Org v: 21.1.8 compositor: xfwm v: 4.18.0 driver: X:
    loaded: modesetting alternate: fbdev,vesa dri: crocus,nouveau gpu: i915
    display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1600x900 s-dpi: 96 s-size: 423x238mm (16.65x9.37")
    s-diag: 485mm (19.11")
  Monitor-1: HDMI-A-1 mapped: HDMI-1 model: KIVI TV serial: <filter>
    built: 2019 res: 1600x900 hz: 60 dpi: 57 gamma: 1.2
    size: 708x398mm (27.87x15.67") diag: 1388mm (54.6") ratio: 16:9 modes:
    max: 1920x1080 min: 720x400
  API: OpenGL Message: Unable to show GL data. Required tool glxinfo
  Device-1: Intel 7 Series/C216 Family High Definition Audio
    vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
    chip-ID: 8086:1e20 class-ID: 0403
  Device-2: NVIDIA TU104 HD Audio vendor: driver: snd_hda_intel
    v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 16 link-max: gen: 3
    speed: 8 GT/s bus-ID: 01:00.1 chip-ID: 10de:10f8 class-ID: 0403
  API: ALSA v: k6.1.25-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsamixer,amixer
  Server-1: JACK v: 1.9.22 status: off tools: N/A
  Server-2: PipeWire v: 0.3.70 status: off tools: pw-cli
  Server-3: PulseAudio v: 16.1 status: active tools: pacat,pactl,pavucontrol
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Micro-Star MSI driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: d000 bus-ID: 03:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Device-2: Qualcomm Atheros AR9271 802.11n type: USB driver: ath9k_htc
    bus-ID: 1-1.4:4 chip-ID: 0cf3:9271 class-ID: ff00 serial: <filter>
  IF: wlp0s26u1u4 state: down mac: <filter>
  Device-1: Qualcomm Atheros AR3011 Bluetooth type: USB driver: N/A
    bus-ID: 1-1.5:5 chip-ID: 0cf3:3002 class-ID: e001
  Report: This feature requires one of these tools: hciconfig/bt-adapter
  Local Storage: total: 774.01 GiB used: 0 KiB (0.0%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: TeamGroup model: T253512GB
    size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
    type: SSD serial: <filter> rev: 0.2 scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 vendor: Toshiba model: THNSNJ256WMCU
    size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
    type: SSD serial: <filter> rev: 0101 scheme: MBR
  ID-3: /dev/sdc maj-min: 8:32 type: USB model: N/A size: 58.59 GiB
    block-size: physical: 512 B logical: 512 B type: N/A serial: <filter>
    rev: 2.00 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No partition data found.
  Alert: No swap data was found.
  System Temperatures: cpu: 43.0 C mobo: N/A gpu: nouveau temp: 28.0 C
  Fan Speeds (RPM): N/A gpu: nouveau fan: 1034
  Processes: 247 Uptime: 1m wakeups: 0 Memory: 15.5 GiB used: 2.06 GiB (13.3%)
  Init: systemd v: 252 default: graphical tool: systemctl Compilers:
  gcc: 12.2.1 clang: 15.0.7 Packages: pm: pacman pkgs: 1164 libs: 325
  tools: pamac pm: flatpak pkgs: 0 Shell: Bash v: 5.1.16
  running-in: xfce4-terminal inxi: 3.3.26
[manjaro@manjaro Desktop]$ sudo manjaro-chroot -a
grub-probe: error: cannot find a GRUB drive for /dev/sdc1.  Check your
grub-probe: error: cannot find a GRUB drive for /dev/sdc1.  Check your
==> Mounting (ManjaroLinux) [/dev/sdb1]
 --> mount: [/mnt]
[manjaro /]# mhwd-kernel -li
Currently running: 6.1.25-1-MANJARO (linux61)
The following kernels are installed in your system:
   * linux61
[manjaro /]# mhwd -li
> Installed PCI configs:
                  NAME               VERSION          FREEDRIVER           TYPE
     video-modesetting            2020.01.13                true            PCI
           video-linux            2018.05.04                true            PCI
          video-nvidia            2023.03.23               false            PCI

Warning: No installed USB configs!
[manjaro /]# exit
 --> umount: [/mnt]
[manjaro@manjaro Desktop]$

on next boot USB live , choose no free drivers

sudo manjaro-chroot -a
pacman -S linux510 linux510-nvidia linux510-headers linux515 linux515-nvidia linux515-headers
mkinitcpio -P
exit (end of chroot )

now go a grub update

sudo update-grub

I hope this will fix your problem

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.