Asus G14 (2022) overheats after waking up from sleep/hibernate

Support
1

I recently bought an Asus g14 2022 has a AMD 5900HS CPU and a Radeon RX 6700S GPU. Works fine until I put it to sleep and wake up. After that the fans wont start and eventually it overheats and crashes. Here’s the sensors output

amdgpu-pci-0700
Adapter: PCI adapter
vddgfx:        1.46 V  
vddnb:       650.00 mV 
edge:         +62.0°C  
PPT:          14.09 W  

k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +65.5°C  

BAT0-acpi-0
Adapter: ACPI interface
in0:          15.93 V  

amdgpu-pci-0300
Adapter: PCI adapter
vddgfx:      712.00 mV 
fan1:           0 RPM  (min =    0 RPM, max = 3300 RPM)
edge:         +63.0°C  (crit = +100.0°C, hyst = -273.1°C)
                       (emerg = +105.0°C)
junction:     +63.0°C  (crit = +100.0°C, hyst = -273.1°C)
                       (emerg = +105.0°C)
mem:          +62.0°C  (crit = +100.0°C, hyst = -273.1°C)
                       (emerg = +105.0°C)
PPT:          12.00 W  (cap =  80.00 W)

asus-isa-0000
Adapter: ISA adapter
cpu_fan:     2400 RPM

nvme-pci-0600
Adapter: PCI adapter
Composite:    +46.9°C  (low  =  -0.1°C, high = +82.8°C)
                       (crit = +84.8°C)
Sensor 1:     +46.9°C  (low  = -273.1°C, high = +65261.8°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +44.0°C  (crit = +120.0°C)
temp2:        +20.0°C  (crit = +110.0°C)

Not sure how to solve this. Or even how to start.

2

suggest run gsmartcontrol to check your hd

3

Just to clarify. The overheat comes from the CPU/GPU. it gets very hot. And this is only after I wake up the laptop from sleep/hibernate. I don’t have the problem if is a regular power up.

4

Might be a tlp issue. Disable or uninstall tlp as a test, see if behaviour persist.

1 Like
5

I actually don’t have it installed.

6

I installed gsmartcontrol and it says “No additional information is available for this device” I can go and see the output and says this

smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.18.10-1-MANJARO] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       Micron_2450_MTFDKBA1T0TFK
Serial Number:                      214632FC29AB
Firmware Version:                   V5MA010
PCI Vendor/Subsystem ID:            0x1344
IEEE OUI Identifier:                0x00a075
Controller ID:                      0
NVMe Version:                       1.4
Number of Namespaces:               1
Namespace 1 Size/Capacity:          1,024,209,543,168 [1.02 TB]
Namespace 1 Formatted LBA Size:     512
Namespace 1 IEEE EUI-64:            00a075 0132fc29ab
Local Time is:                      Wed Jul 13 10:33:16 2022 PDT
Firmware Updates (0x14):            2 Slots, no Reset required
Optional Admin Commands (0x0017):   Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005f):     Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x1e):         Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg
Maximum Data Transfer Size:         64 Pages
Warning  Comp. Temp. Threshold:     83 Celsius
Critical Comp. Temp. Threshold:     85 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     5.50W       -        -    0  0  0  0        0       0
 1 +     2.40W       -        -    1  1  1  1        0       0
 2 +     1.92W       -        -    2  2  2  2        0       0
 3 -   0.0700W       -        -    3  3  3  3     1000    1000
 4 -   0.0050W       -        -    4  4  4  4    10000   40000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
7

Hi, I’m buying exactly same laptop. Did you figure out your problem?

8

Yes. Just got fix with the latest kernel 6.1. As long as you use the 6.1 kernel or above you should be fine.