I have a fresh installation of Anh-Linh 25.1-pre1 and installed printers and scanner with success. The scanner is working with gscan2pdf correct. Now I tried to install the Gimp-plugin.
sudo pacman -S xsane xsane-gimp
This didn’t show the scanner-connection in Gimp "File → Acquire → …” and there were errors. After I had a look at AUR, I uninstalled the 2 packages and installed:
xsane-git xsane-gimp-git cfitsio
Now the Plugin works and I can scan inside Gimp. But with errors (starting via commandline):
gimp
set device 'Wayland Pointer' to mode: disabled
(xsane:158305): Gdk-CRITICAL **: 14:38:06.664: gdk_monitor_get_workarea: assertion 'GDK_IS_MONITOR (monitor)' failed
(xsane:158305): Gtk-CRITICAL **: 14:38:06.665: gtk_widget_set_size_request: assertion 'width >= -1' failed
[xsane] ERROR: xsane-startimage not found. Looks like xsane is not installed correct.
[xsane] ERROR: xsane-startimage not found. Looks like xsane is not installed correct.
[xsane] ERROR: xsane-startimage not found. Looks like xsane is not installed correct.
[xsane] Failed to get preview image memory.
It is still possible to scan, because the errors disappear. Still the message “force quit or wait“ appears.
Any idea? Is it on missing X11?
Here my inxi:
inxi -zv8
System:
Kernel: 6.18.1-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 15.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.18-x86_64
root=UUID=36bfd2b8-5279-4b34-982d-616c2cd7e1de rw quiet splash apparmor=1
security=apparmor udev.log_priority=3
Desktop: GNOME v: 49.2 tk: GTK v: 3.24.51 wm: gnome-shell
tools: gsd-screensaver-proxy dm: GDM v: 49.2 Distro: Manjaro
base: Arch Linux
Machine:
Type: Desktop System: ASUS product: All Series v: N/A
serial: <superuser required>
Mobo: ASUSTeK model: Z97-A-USB31 v: Rev 1.xx serial: <superuser required>
part-nu: All uuid: <superuser required> Firmware: UEFI-[Legacy]
vendor: American Megatrends v: 3503 date: 04/18/2018
Battery:
Message: No system battery data found. Is one present?
Memory:
System RAM: total: 16 GiB available: 15.55 GiB used: 5.02 GiB (32.3%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 32 GiB slots: 4 modules: 2 EC: None
max-module-size: 8 GiB note: est.
Device-1: DIMM_A1 type: DDR3 detail: synchronous size: 8 GiB speed:
spec: 1600 MT/s actual: 1333 MT/s volts: curr: 2 min: 2 max: 2 width (bits):
data: 64 total: 64 manufacturer: Chips and Technologies
part-no: F3-1600C9-8GAR serial: N/A
Device-2: DIMM_A2 type: DDR3 detail: synchronous size: 8 GiB speed:
spec: 1600 MT/s actual: 1333 MT/s volts: curr: 2 min: 2 max: 2 width (bits):
data: 64 total: 64 manufacturer: Chips and Technologies
part-no: F3-1600C9-8GAR serial: N/A
Device-3: DIMM_B1 type: no module installed
Device-4: DIMM_B2 type: no module installed
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Xeon E3-1231 v3 bits: 64 type: MT MCP arch: Haswell
level: v3 note: check built: 2013-15 process: Intel 22nm family: 6
model-id: 0x3C (60) stepping: 3 microcode: 0x28
Topology: cpus: 1x dies: 1 clusters: 4 cores: 4 threads: 8 tpc: 2
smt: enabled cache: L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB
desc: 4x256 KiB L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 800 min/max: 800/3800 scaling: driver: intel_cpufreq
governor: schedutil cores: 1: 800 2: 800 3: 800 4: 800 5: 800 6: 800 7: 800
8: 800 bogomips: 54371
Flags: abm acpi aes aperfmperf apic arat arch_perfmon avx avx2 bmi1 bmi2
bts clflush cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64
dtherm dts epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu
fsgsbase fxsr ht ibpb ibrs ida invpcid lahf_lm lm mca mce md_clear mmx
monitor movbe msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq
pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts rdrand rdtscp
rep_good sdbg sep smep smx ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp
syscall tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi
vpid x2apic xsave xsaveopt xtopology xtpr
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: ghostwrite status: Not affected
Type: indirect_target_selection status: Not affected
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Not affected
Type: old_microcode status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW;
STIBP: conditional; RSB filling; PBRSB-eIBRS: Not affected; BHI: Not
affected
Type: srbds mitigation: Microcode
Type: tsa status: Not affected
Type: tsx_async_abort status: Not affected
Type: vmscape mitigation: IBPB before exit to userspace
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Ellesmere [Radeon RX
470/480/570/570X/580/580X/590] vendor: Sapphire driver: amdgpu v: kernel
arch: GCN-4 code: Arctic Islands process: GF 14nm built: 2016-20 pcie:
gen: 3 speed: 8 GT/s lanes: 16 ports: active: HDMI-A-2 empty: DP-1, DP-2,
DVI-D-1, HDMI-A-1 bus-ID: 01:00.0 chip-ID: 1002:67df class-ID: 0300
temp: 46.0 C
Display: wayland server: X.org v: 1.21.1.21 with: Xwayland v: 24.1.9
compositor: gnome-shell driver: X: loaded: amdgpu
unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
gpu: amdgpu display-ID: 0
Monitor-1: HDMI-A-2 model: Acer S273HL serial: <filter> built: 2011
res: 1920x1080 dpi: 82 gamma: 1.2 chroma: red: x: 0.651 y: 0.337 green:
x: 0.290 y: 0.612 blue: x: 0.145 y: 0.071 white: x: 0.314 y: 0.329
size: 597x336mm (23.5x13.23") diag: 685mm (27") ratio: 16:9
modes: 1920x1080, 1280x1024, 1440x900, 1280x800, 1152x864, 1280x720,
1024x768, 800x600, 720x576, 720x480, 640x480, 720x400
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast gbm: drv: kms_swrast surfaceless: drv: radeonsi
wayland: drv: radeonsi x11: drv: radeonsi
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 25.3.1-arch1.2
glx-v: 1.4 direct-render: yes renderer: AMD Radeon RX 570 Series (radeonsi
polaris10 ACO DRM 3.64 6.18.1-1-MANJARO) device-ID: 1002:67df
memory: 7.81 GiB unified: no display-ID: :0.0
Info: Tools: api: eglinfo,glxinfo x11: xprop
Audio:
Device-1: Intel 9 Series Family HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:8ca0
class-ID: 0403
Device-2: Advanced Micro Devices [AMD/ATI] Ellesmere HDMI Audio [Radeon
RX 470/480 / 570/580/590] vendor: Sapphire driver: snd_hda_intel v: kernel
pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 1002:aaf0
class-ID: 0403
Device-3: VIA VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio
driver: snd_ice1724 v: kernel bus-ID: 07:00.0 chip-ID: 1412:1724
class-ID: 0401
API: ALSA v: k6.18.1-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 1.4.9 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I218-V vendor: ASUSTeK driver: e1000e v: kernel
port: f040 bus-ID: 00:19.0 chip-ID: 8086:15a1 class-ID: 0200
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: noprefixroute scope: global broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
WAN IP: <filter>
Bluetooth:
Message: No bluetooth data found.
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 10.92 TiB used: 1.85 TiB (17.0%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: CT1000MX500SSD1
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 046 scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST8000DM004-2U9188
size: 7.28 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 5400 serial: <filter> fw-rev: 0001
ID-3: /dev/sdc maj-min: 8:32 vendor: Western Digital
model: WD30EZRX-00DC0B0 size: 2.73 TiB block-size: physical: 4096 B
logical: 512 B speed: 3.0 Gb/s tech: N/A serial: <filter> fw-rev: 0A80
scheme: GPT
Optical-1: /dev/sr0 vendor: HL-DT-ST model: BD-RE BH16NS40 rev: 1.03
dev-links: cdrom
Features: speed: 48 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Optical-2: /dev/sr1 vendor: HL-DT-ST model: DVD-RAM GH22LP20 rev: 2.00
dev-links: N/A
Features: speed: 48 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
ID-1: / raw-size: 784.54 GiB size: 771.16 GiB (98.29%)
used: 26.28 GiB (3.4%) fs: ext4 dev: /dev/sda3 maj-min: 8:3 label: N/A
uuid: 36bfd2b8-5279-4b34-982d-616c2cd7e1de
ID-2: /home raw-size: 7.28 TiB size: 7.16 TiB (98.42%)
used: 1.83 TiB (25.5%) fs: ext4 dev: /dev/sdb maj-min: 8:16 label: home
uuid: f107e863-69ce-4197-88d6-4cf06311bfa1
ID-3: /media/fritznas raw-size: N/A size: 117.18 GiB
used: 404.7 MiB (0.3%) fs: cifs dev: /dev/FA
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes
compressor: zstd max-pool: 20%
ID-1: swap-1 type: partition size: 20.02 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/sda5 maj-min: 8:5 label: N/A
uuid: e1682136-484a-4a62-bac0-4faa41ed7348
Unmounted:
ID-1: /dev/sda1 maj-min: 8:1 size: 579 MiB fs: ntfs label: N/A
uuid: 9A608D3A608D1DDF
ID-2: /dev/sda2 maj-min: 8:2 size: 126.39 GiB fs: ntfs label: WIN10PRO
uuid: DE6A888D6A88645D
ID-3: /dev/sda4 maj-min: 8:4 size: 1 KiB fs: <superuser required>
label: N/A uuid: N/A
ID-4: /dev/sdc1 maj-min: 8:33 size: 1.37 TiB fs: ntfs label: Bild
uuid: 080A694D0A693938
ID-5: /dev/sdc2 maj-min: 8:34 size: 1.36 TiB fs: ntfs label: Musik
uuid: 54226F67226F4CD4
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 14 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 1-4:2 info: CHERRY KC 6000 Slim Keyboard type: keyboard,HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0
speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA
chip-ID: 046a:0113 class-ID: 0300
Device-2: 1-6:3 info: JMicron / USA JM20337 Hi-Speed USB to SATA & PATA
Combo Bridge type: mass storage driver: usb-storage interfaces: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 2mA
chip-ID: 152d:2338 class-ID: 0806 serial: <filter>
Device-3: 1-7:4 info: Genesys Logic Multislot Card Reader/Writer
type: mass storage driver: usb-storage interfaces: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
chip-ID: 05e3:0716 class-ID: 0806 serial: <filter>
Device-4: 1-12:5 info: MosArt Wireless Mouse type: mouse
driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 100mA chip-ID: 062a:4102 class-ID: 0301
Hub-2: 2-0:1 info: full speed or root hub ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-3: 2-1:2 info: Intel ports: 6 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 chip-ID: 8087:8009 class-ID: 0900
Hub-4: 3-0:1 info: super-speed hub ports: 6 rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-5: 4-0:1 info: full speed or root hub ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-6: 4-1:2 info: Intel Integrated Hub ports: 8 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 8087:8001
class-ID: 0900
Hub-7: 5-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-8: 6-0:1 info: super-speed hub ports: 2 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 34.0 C mobo: N/A gpu: amdgpu temp: 46.0 C
Fan Speeds (rpm): N/A gpu: amdgpu fan: 1555
Repos:
Packages: 1508 pm: dpkg pkgs: 6 pm: pacman pkgs: 1488 libs: 379
tools: gnome-software,pamac pm: flatpak pkgs: 14
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: http://ftp.uni-kl.de/pub/linux/manjaro/stable/$repo/$arch
2: https://quantum-mirror.hu/mirrors/pub/manjaro/stable/$repo/$arch
3: https://mirror.easyname.at/manjaro/stable/$repo/$arch
4: https://ftp.lysator.liu.se/pub/manjaro/stable/$repo/$arch
5: https://mirror.telepoint.bg/manjaro/stable/$repo/$arch
6: https://mirrors.dotsrc.org/manjaro/stable/$repo/$arch
7: https://mirror.mobinhost.com/manjaro/stable/$repo/$arch
8: https://manjaro.repo.cure.edu.uy/stable/$repo/$arch
Processes:
CPU top: 5 of 383
1: cpu: 3.5% command: gnome-shell pid: 2195 mem: 341.5 MiB (2.1%)
2: cpu: 2.0% command: C:\windows\system32\winedevice.exe pid: 3554
mem: 36.4 MiB (0.2%)
3: cpu: 1.9% command: gnome-text-editor pid: 160602 mem: 301.0 MiB (1.8%)
4: cpu: 1.3% command: brave pid: 7603 mem: 266.5 MiB (1.6%)
5: cpu: 1.2% command: brave pid: 7474 mem: 440.4 MiB (2.7%)
Memory top: 5 of 383
1: mem: 1315.6 MiB (8.2%) command: pamac-manager pid: 21625 cpu: 0.4%
2: mem: 566.7 MiB (3.5%) command: Telegram pid: 19913 cpu: 0.1%
3: mem: 440.4 MiB (2.7%) command: brave pid: 7474 cpu: 1.2%
4: mem: 341.5 MiB (2.1%) command: gnome-shell pid: 2195 cpu: 3.5%
5: mem: 301.0 MiB (1.8%) command: gnome-text-editor pid: 160602 cpu: 1.9%
Info:
Processes: 383 Power: uptime: 1h 39m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 6.2 GiB services: gsd-power,
power-profiles-daemon, upowerd Init: systemd v: 258 default: graphical
tool: systemctl
Compilers: clang: 21.1.6 gcc: 15.2.1 Shell: Bash v: 5.3.8 running-in: kgx
inxi: 3.3.40