Añadir Impresora

Buenas tardes, he añadido una impresora Epson L805, todo bien , pero cuando le doy a imprimir, me pasa la/las hoja/as en blanco, cups está activo, necesitará de algún privilegio?, debe ser pienso porque la misma está conectada a un iMac, algún tip.
Muchas gracias!!!

  Kernel: 5.15.21-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
    root=UUID=61632335-31b7-4a7c-937a-859aa5d430b7 rw quiet
  Desktop: KDE Plasma 5.23.5 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
    Distro: Manjaro Linux base: Arch Linux
  Type: Laptop System: Hewlett-Packard product: HP Pavilion dv2500 Notebook PC
    v: F.2E serial: <superuser required> Chassis: type: 10
    serial: <superuser required>
  Mobo: Wistron model: 30CD v: 80.52 serial: <superuser required>
    BIOS: Phoenix v: F.2E date: 12/01/2008
  ID-1: BAT0 charge: 17.7 Wh (2.5%) condition: 707.6/47.5 Wh (1489.0%)
    volts: 12.0 min: 10.8 model: DP-SAN44 VE06047 type: Li-ion serial: <filter>
    status: N/A
  RAM: total: 1.92 GiB used: 1.45 GiB (75.3%)
  RAM Report:
    permissions: Unable to run dmidecode. Root privileges required.
  Info: model: Intel Core2 Duo T5250 bits: 64 type: MCP arch: Core Merom
    family: 6 model-id: 0xF (15) stepping: 0xD (13) microcode: 0xA4
  Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB
    desc: d-2x32 KiB; i-2x32 KiB L2: 2 MiB desc: 1x2 MiB
  Speed (MHz): avg: 997 min/max: 1000/1500 scaling: driver: acpi-cpufreq
    governor: schedutil cores: 1: 997 2: 997 bogomips: 5986
  Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc
    cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts est fpu fxsr ht lahf_lm lm mca
    mce mmx monitor msr mtrr nopl nx pae pat pbe pdcm pebs pge pni pse pse36
    pti rep_good sep sse sse2 ssse3 syscall tm tm2 tsc vme xtpr
  Type: itlb_multihit status: KVM: VMX unsupported
  Type: l1tf mitigation: PTE Inversion
  Type: mds
    status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
  Type: meltdown mitigation: PTI
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2
    mitigation: Full generic retpoline, STIBP: disabled, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
  Device-1: Intel Mobile GM965/GL960 Integrated Graphics
    vendor: Hewlett-Packard driver: i915 v: kernel bus-ID: 00:02.0
    chip-ID: 8086:2a02 class-ID: 0300
  Device-2: Chicony VGA 30fps UVC Webcam type: USB driver: uvcvideo
    bus-ID: 2-5:3 chip-ID: 04f2:b016 class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org compositor: kwin_x11 driver:
    loaded: modesetting alternate: fbdev,vesa display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1280x800 s-dpi: 96 s-size: 338x211mm (13.3x8.3")
    s-diag: 398mm (15.7")
  Monitor-1: LVDS-1 res: 1280x800 hz: 60 dpi: 107
    size: 304x190mm (12.0x7.5") diag: 358mm (14.1")
  Message: Unable to show advanced data. Required tool glxinfo missing.
  Device-1: Intel 82801H HD Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:284b
    class-ID: 0403
  Sound Server-1: ALSA v: k5.15.21-1-MANJARO running: yes
  Sound Server-2: JACK v: 1.9.20 running: no
  Sound Server-3: PulseAudio v: 15.0 running: yes
  Sound Server-4: PipeWire v: 0.3.45 running: yes
  Device-1: Marvell 88E8039 PCI-E Fast Ethernet vendor: Hewlett-Packard
    driver: sky2 v: 1.30 port: 3000 bus-ID: 05:00.0 chip-ID: 11ab:4353
    class-ID: 0200
  IF: ens3 state: down mac: <filter>
  Device-2: Intel PRO/Wireless 4965 AG or AGN [Kedron] Network
    driver: iwl4965 v: in-tree:d bus-ID: 07:00.0 chip-ID: 8086:4229
    class-ID: 0280
  IF: wls5 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  WAN IP: <filter>
  Device-1: HP Bluetooth 2.0 Interface [Broadcom BCM2045] type: USB
    driver: btusb v: 0.8 bus-ID: 7-2:3 chip-ID: 03f0:171d class-ID: fe01
  Report: bt-adapter ID: hci0 rfk-id: 3 state: up address: <filter>
  Message: No logical block device data found.
  Message: No RAID data found.
  Local Storage: total: 149.05 GiB used: 33.09 GiB (22.2%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Hitachi model: HTS542516K9SA00
    size: 149.05 GiB block-size: physical: 512 B logical: 512 B speed: 1.5 Gb/s
    type: N/A serial: <filter> rev: C32P scheme: MBR
  Optical-1: /dev/sr0 vendor: Slimtype model: DVD A DS8A1H rev: WH66
    dev-links: cdrom
  Features: speed: 24 multisession: yes audio: yes dvd: yes
    rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
  ID-1: / raw-size: 144.78 GiB size: 141.5 GiB (97.74%)
    used: 32.67 GiB (23.1%) fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: N/A
    uuid: 61632335-31b7-4a7c-937a-859aa5d430b7
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 4.27 GiB used: 430.4 MiB (9.8%)
    priority: -2 dev: /dev/sda2 maj-min: 8:2 label: N/A
    uuid: 27bd3606-8866-41d8-a173-53fcb5f51a0b
  Message: No unmounted partitions found.
  Hub-1: 1-0:1 info: Full speed or root hub ports: 4 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 2-0:1 info: Full speed or root hub ports: 6 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 2-5:3 info: Chicony VGA 30fps UVC Webcam type: Video
    driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
    chip-ID: 04f2:b016 class-ID: 0e02 serial: <filter>
  Hub-3: 3-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s
    chip-ID: 1d6b:0001 class-ID: 0900
  Hub-4: 4-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s
    chip-ID: 1d6b:0001 class-ID: 0900
  Device-1: 4-1:2 info: AuthenTec AES2501 Fingerprint Sensor
    type: <vendor specific> driver: N/A interfaces: 1 rev: 1.1 speed: 12 Mb/s
    power: 100mA chip-ID: 08ff:2580 class-ID: ff00
  Hub-5: 5-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s
    chip-ID: 1d6b:0001 class-ID: 0900
  Hub-6: 6-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s
    chip-ID: 1d6b:0001 class-ID: 0900
  Device-1: 6-2:2 info: MosArt Wireless Keyboard/Mouse type: Keyboard,Mouse
    driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s
    power: 100mA chip-ID: 062a:4101 class-ID: 0301
  Hub-7: 7-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s
    chip-ID: 1d6b:0001 class-ID: 0900
  Device-1: 7-2:3 info: HP Bluetooth 2.0 Interface [Broadcom BCM2045]
    type: Bluetooth driver: btusb interfaces: 4 rev: 2.0 speed: 12 Mb/s
    chip-ID: 03f0:171d class-ID: fe01
  System Temperatures: cpu: 58.0 C mobo: 51.0 C
  Fan Speeds (RPM): N/A
  Processes: 196 Uptime: 1h 38m wakeups: 2 Init: systemd v: 250
  tool: systemctl Compilers: gcc: 11.1.0 clang: 13.0.1 Packages: pacman: 1431
  lib: 381 flatpak: 0 Shell: Bash v: 5.1


Instalaste el epson-inkjet-printer-l805 desde AUR ?

Hola, no, lo haré y veré el resultado. Muchas gracias

Intenté descargarlo un par de veces pero me acusa " error en build",lo hice desde pamac y también desde yay

Mira los comentarios en la pagina del paquete AUR (en) - epson-inkjet-printer-l805

Vas a las impresoras, selecciones tu impresora le das click derecho y le das en detalles de la impresora, aparece con controlador generico para cambiarlo le las click en Detalle, le das Seleccionar de la base de datos, buscas marca y modelo de tu impresora o una que se le parezca y listo. Asi le tengo que hacer para que funcione una Epson L3110.