Wine and SteamPlay are not working

wine打不开,SteamPlay一启动就会黑屏然后跳出/dev/sda2/:clean,373429/6553600 files,4332681 /26214400 blocks后直接被强制注销

When wine doesn’t open, SteamPlay will black out as soon as it starts and then jump out/dev/sda2/:clean, 373429/6553600 files, 4332681 /26214400 the blocks and be forced to log off directly
Note: This is machine translated and may not be accurate

  Kernel: 5.13.11-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.13-x86_64 
  root=UUID=4e7e0115-6e72-48de-90a1-156f9d1cadf7 rw quiet apparmor=1 
  security=apparmor udev.log_priority=3 
  Desktop: KDE Plasma 5.22.4 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM 
  Distro: Manjaro Linux base: Arch Linux 
  Type: Laptop System: Hewlett-Packard product: HP EliteBook 820 G1 
  v: A3009DD10303 serial: <filter> Chassis: type: 10 serial: <filter> 
  Mobo: Hewlett-Packard model: 1991 v: KBC Version 15.59 serial: <filter> 
  UEFI: Hewlett-Packard v: L71 Ver. 01.48 date: 08/29/2019 
  ID-1: BAT0 charge: 35.4 Wh (94.4%) condition: 37.5/37.5 Wh (100.0%) 
  volts: 12.4 min: 11.2 model: Hewlett-Packard Primary type: Li-ion 
  serial: <filter> status: Unknown 
  RAM: total: 7.67 GiB used: 1.96 GiB (25.5%) 
  RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
  Info: Dual Core model: Intel Core i5-4310U bits: 64 type: MT MCP 
  arch: Haswell family: 6 model-id: 45 (69) stepping: 1 microcode: 26 cache: 
  L2: 3 MiB bogomips: 20756 
  Speed: 1991 MHz min/max: 800/3000 MHz Core speeds (MHz): 1: 1991 2: 2084 
  3: 2098 4: 1995 
  Flags: abm acpi aes aperfmperf apic arat arch_perfmon avx avx2 bmi1 bmi2 bts 
  clflush cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm 
  dts epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase 
  fxsr ht ibpb ibrs ida invpcid invpcid_single lahf_lm lm mca mce md_clear mmx 
  monitor movbe msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm 
  pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts rdrand rdtscp rep_good 
  sdbg sep smep smx ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 
  tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic xsave 
  xsaveopt xtopology xtpr 
  Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
  Type: l1tf 
  mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
  Type: meltdown mitigation: PTI 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, 
  IBRS_FW, STIBP: conditional, RSB filling 
  Type: srbds mitigation: Microcode 
  Type: tsx_async_abort status: Not affected 
  Device-1: Intel Haswell-ULT Integrated Graphics vendor: Hewlett-Packard 
  driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:0a16 class-ID: 0300 
  Device-2: Lite-On HP HD Webcam type: USB driver: uvcvideo bus-ID: 2-7:7 
  chip-ID: 04ca:7034 class-ID: 0e02 serial: <filter> 
  Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver: 
  loaded: intel unloaded: modesetting alternate: fbdev,vesa display-ID: :0 
  screens: 1 
  Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.2x8.0") 
  s-diag: 414mm (16.3") 
  Monitor-1: eDP1 res: 1366x768 hz: 60 dpi: 124 size: 280x160mm (11.0x6.3") 
  diag: 322mm (12.7") 
  OpenGL: renderer: Mesa DRI Intel HD Graphics 4400 (HSW GT2) 
  v: 4.5 Mesa 21.2.1 compat-v: 3.0 direct render: Yes 
  Device-1: Intel Haswell-ULT HD Audio vendor: Hewlett-Packard 
  driver: snd_hda_intel v: kernel bus-ID: 00:03.0 chip-ID: 8086:0a0c 
  class-ID: 0403 
  Device-2: Intel 8 Series HD Audio vendor: Hewlett-Packard 
  driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:9c20 
  class-ID: 0403 
  Sound Server-1: ALSA v: k5.13.11-1-MANJARO running: yes 
  Sound Server-2: JACK v: 1.9.19 running: no 
  Sound Server-3: PulseAudio v: 15.0 running: yes 
  Sound Server-4: PipeWire v: 0.3.33 running: yes 
  Device-1: Intel Ethernet I218-LM vendor: Hewlett-Packard driver: e1000e 
  v: kernel port: 3080 bus-ID: 00:19.0 chip-ID: 8086:155a class-ID: 0200 
  IF: enp0s25 state: down mac: <filter> 
  Device-2: Intel Wireless 7260 driver: iwlwifi v: kernel port: ef80 
  bus-ID: 02:00.0 chip-ID: 8086:08b1 class-ID: 0280 
  IF: wlo1 state: up mac: <filter> 
  IP v4: <filter> type: dynamic noprefixroute scope: global 
  broadcast: <filter> 
  IP v6: <filter> type: noprefixroute scope: link 
  WAN IP: <filter> 
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 
  bus-ID: 2-4:4 chip-ID: 8087:07dc class-ID: e001 
  Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends 
  Message: No logical block device data found. 
  Message: No RAID data found. 
  Local Storage: total: 476.94 GiB used: 168.31 GiB (35.3%) 
  SMART Message: Unable to run smartctl. Root privileges required. 
  ID-1: /dev/sda maj-min: 8:0 vendor: SanDisk model: SD6SB2M-512G-1006 
  size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s 
  type: SSD serial: <filter> rev: 706 scheme: GPT 
  Message: No optical or floppy data found. 
  ID-1: / raw-size: 60 GiB size: 58.76 GiB (97.93%) used: 8.68 GiB (14.8%) 
  fs: ext4 dev: /dev/sda3 maj-min: 8:3 label: N/A 
  uuid: 4e7e0115-6e72-48de-90a1-156f9d1cadf7 
  ID-2: /boot/efi raw-size: 513 MiB size: 512 MiB (99.80%) 
  used: 288 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: NO_LABEL 
  uuid: D37D-15DC 
  ID-3: /home raw-size: 416.44 GiB size: 408.9 GiB (98.19%) 
  used: 159.63 GiB (39.0%) fs: ext4 dev: /dev/sda2 maj-min: 8:2 label: N/A 
  uuid: 514df18a-5a04-4f3d-808f-2555274c8509 
  Alert: No swap data was found. 
  Message: No unmounted partitions found. 
  Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0 
  speed: 480 Mb/s chip-ID: 8087:8000 class-ID: 0900 
  Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 9 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Hub-4: 2-3:3 info: Microchip (formerly SMSC) Hub ports: 3 rev: 2.1 
  speed: 480 Mb/s chip-ID: 0424:2134 class-ID: 0900 
  Device-1: 2-3.1:5 info: Pixart Imaging Optical Mouse type: Mouse 
  driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s 
  power: 100mA chip-ID: 093a:2510 class-ID: 0301 
  Device-2: 2-4:4 info: Intel Bluetooth wireless interface type: Bluetooth 
  driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA 
  chip-ID: 8087:07dc class-ID: e001 
  Device-3: 2-5:6 info: Validity Sensors VFS495 Fingerprint Reader 
  type: <vendor specific> driver: N/A interfaces: 1 rev: 1.1 speed: 12 Mb/s 
  power: 100mA chip-ID: 138a:003f class-ID: ff00 serial: <filter> 
  Device-4: 2-7:7 info: Lite-On HP HD Webcam type: Video driver: uvcvideo 
  interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 04ca:7034 
  class-ID: 0e02 serial: <filter> 
  Hub-5: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
  Hub-6: 3-3:2 info: Microchip (formerly SMSC) Hub ports: 3 rev: 3.0 
  speed: 5 Gb/s chip-ID: 0424:5534 class-ID: 0900 
  System Temperatures: cpu: 53.0 C mobo: 0.0 C 
  Fan Speeds (RPM): N/A 
  Processes: 186 Uptime: 12h 10m wakeups: 4 Init: systemd v: 248 
  tool: systemctl Compilers: gcc: N/A Packages: pacman: 1194 lib: 330 
  flatpak: 0 Shell: Zsh v: 5.8 default: Bash v: 5.1.8 running-in: konsole 
  inxi: 3.3.06 

In other words: you lose the graphical session after starting a game in Steam Play. Did i get that right?

Also, for starters:

Please follow the instructions in the linked thread.

I modified it :grinning:

Should verify by searching for more info, but most likely this is not compatible with Proton/Vulkan.

However you can try to add startup parameter in the game properties in Steam to force OpenGL.

PROTON_USE_WINED3D=1 %command%

It may work.

Please provide the errors. Without more info, we can’t really help. Launch Steam via terminal, then launch a game.

Love these non explicative answers. What happens then?

No change, still not working. And there are worse things after restarting. I’m stuck on that interface. I can’t get into the system at all

That’s what happened after I restarted

Adding a Steam game startup parameter can not do anything to your system.

I am going to reinstall the system and do it again, after all, I better figure out what caused the error

This error seems to destroy my graphics driver
I don’t know what caused it, after all, I’m just a novice

This error is also useless to reinstall the system, my own method is to delete all the partitions on the hard disk and reinstall

Forget it, this graphics card driver doesn’t seem to be compatible with my old graphics card at all

This problem is caused by installing the wrong driver. I didn’t install the correct driver

That is the correct driver which is installed automatically.

Then I don’t know.

After losing the graphical session, you can try logging back in and recover the Steam logs:

  • if you don’t have a (console-type) login prompt, change TTY with Ctrl+Alt+F2
  • you should have a console-type login prompt, log in with your usual credentials
  • start a graphical session with startx
  • you should find Steam log files in /tmp/dumps, copy them in your home directory so you don’t lose them after reboot

As for the graphical session logs, you may find traces of what happened in the system logs.