Have to unplug and plug Akko VIA keyboard every time I reboot

When I reboot the computer (or suspend and unsuspend it), the OS does not recognize the keyboard, and I have to unplug it and plug it again, then it works.

Is an Akko 5087S VIA, I have another Akko keyboard without VIA (Also known as QMK) and it has no problems. This problem happens on multiple computers, all of them with Manjaro but different kernel versions. I can access the bios and works, therefore the problem might be on the OS.

I provided inxi info and dmesg logs. As you can see, the keyboard is plugged on usb 3-3 with product id fffe:000c and is being detected at 1.30s from boot. But I have to disconnect it at 57 (i used other keyboard to log in). These logs doesn’t differ much, so tell me if any more info is needed.

Logs

Inxi

$ # Before unplugging
$ sudo inxi --admin --verbosity=7 --filter --no-host --width
System:
  Kernel: 6.6.10-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc avail: hpet,acpi_pm
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64
    root=UUID=dbd78c17-f7c0-476f-b72a-459ec5566942 rw quiet
    udev.log_priority=3
  Desktop: bspwm v: 0.9.10 with: polybar tools: light-locker avail: i3lock
    dm: LightDM v: 1.32.0 Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: ASUSTeK model: P8Z77-V LX v: Rev X.0x serial: <filter>
    part-nu: SKU uuid: 21804fa0-d7da-11dd-991e-50465d57cff2
    UEFI: American Megatrends v: 1201 date: 08/17/2012
Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 16 GiB available: 15.57 GiB used: 1.96 GiB (12.6%)
  Array-1: capacity: 32 GiB slots: 4 modules: 2 EC: None
    max-module-size: 8 GiB note: est.
  Device-1: ChannelA-DIMM0 type: DDR3 detail: synchronous size: 8 GiB
    speed: 1600 MT/s volts: N/A width (bits): data: 64 total: 64
    manufacturer: Kingston part-no: 99U5471-056.A00LF serial: <filter>
  Device-2: ChannelA-DIMM1 type: no module installed
  Device-3: ChannelB-DIMM0 type: DDR3 detail: synchronous size: 8 GiB
    speed: 1600 MT/s volts: N/A width (bits): data: 64 total: 64
    manufacturer: Kingston part-no: 99U5471-054.A00LF serial: <filter>
  Device-4: ChannelB-DIMM1 type: no module installed
CPU:
  Info: model: Intel Core i7-3770 socket: LGA1155 bits: 64 type: MT MCP
    arch: Ivy Bridge gen: core 3 level: v2 built: 2012-15 process: Intel 22nm
    family: 6 model-id: 0x3A (58) stepping: 9 microcode: 0x21
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
    L3: 8 MiB desc: 1x8 MiB
  Speed (MHz): avg: 3621 high: 3682 min/max: 1600/3900 base/boost: 3400/3800
    scaling: driver: intel_cpufreq governor: schedutil volts: 1.0 V
    ext-clock: 100 MHz cores: 1: 3646 2: 3649 3: 3612 4: 3578 5: 3671 6: 3682
    7: 3578 8: 3553 bogomips: 54590
  Flags: acpi aes aperfmperf apic arat arch_perfmon avx bts clflush cmov
    constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb
    ept erms est f16c flexpriority flush_l1d fpu fsgsbase fxsr ht ibpb ibrs
    ida lahf_lm lm mca mce md_clear mmx monitor msr mtrr nonstop_tsc nopl nx
    pae pat pbe pcid pclmulqdq pdcm pebs pge pln pni popcnt pse pse36 pti pts
    rdrand rdtscp rep_good sep smep smx ss ssbd sse sse2 sse4_1 sse4_2 ssse3
    stibp syscall tm tm2 tpr_shadow tsc tsc_deadline_timer vme vmx vnmi vpid
    x2apic xsave xsaveopt xtopology xtpr
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
    vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
    STIBP: conditional, RSB filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Vulnerable: No microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA GK104 [GeForce GTX 760] vendor: ASUSTeK driver: nvidia
    v: 470.223.02 alternate: nouveau,nvidia_drm non-free: series: 470.xx+
    status: legacy-active (EOL~2024-09-xx) arch: Kepler code: GKxxx
    process: TSMC 28nm built: 2012-2018 pcie: gen: 3 speed: 8 GT/s lanes: 16
    bus-ID: 01:00.0 chip-ID: 10de:1187 class-ID: 0300
  Display: x11 server: X.Org v: 21.1.10 compositor: Picom v: git-b700a
    driver: X: loaded: nvidia gpu: nvidia display-ID: :0 screens: 1
  Screen-1: 0 s-res: 2688x1848 s-dpi: 102 s-size: 669x460mm (26.34x18.11")
    s-diag: 812mm (31.96")
  Monitor-1: DP-0 pos: middle-r res: 768x1360 hz: 60 dpi: 30
    size: 650x1150mm (25.59x45.28") diag: 1321mm (52.01") modes: N/A
  Monitor-2: DVI-I-0 pos: top-center res: 1366x768 hz: 60 dpi: 101
    size: 344x193mm (13.54x7.6") diag: 394mm (15.53") modes: N/A
  Monitor-3: HDMI-0 pos: primary,bottom-l res: 1920x1080 hz: 60 dpi: 96
    size: 510x290mm (20.08x11.42") diag: 587mm (23.1") modes: N/A
  API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia device: 2
    drv: swrast gbm: drv: kms_swrast surfaceless: drv: swrast x11: drv: nvidia
    inactive: wayland,device-1
  API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 470.223.02
    glx-v: 1.4 direct-render: yes renderer: NVIDIA GeForce GTX 760/PCIe/SSE2
    memory: 1.95 GiB
Audio:
  Device-1: Intel 7 Series/C216 Family High Definition Audio
    vendor: ASUSTeK P8Z77-V LX driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
    chip-ID: 8086:1e20 class-ID: 0403
  Device-2: NVIDIA GK104 HDMI Audio vendor: ASUSTeK driver: snd_hda_intel
    v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 01:00.1
    chip-ID: 10de:0e0a class-ID: 0403
  API: ALSA v: k6.6.10-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: PipeWire v: 1.0.0 status: n/a (root, process) with:
    1: pipewire-pulse status: active 2: wireplumber status: active
    3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: ASUSTeK P8P67 and other motherboards driver: r8169 v: kernel pcie:
    gen: 1 speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 03:00.0
    chip-ID: 10ec:8168 class-ID: 0200
  IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: noprefixroute scope: global broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  IF-ID-1: br-bdde47fbe98c state: down mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IF-ID-2: docker0 state: down mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IF-ID-3: docker_gwbridge state: up speed: 10000 Mbps duplex: unknown
    mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IP v6: <filter> virtual: proto kernel_ll scope: link
  IF-ID-4: veth82150ea state: up speed: 10000 Mbps duplex: full mac: <filter>
  IF-ID-5: vethbdd8717 state: up speed: 10000 Mbps duplex: full mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) driver: btusb
    v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 2-1.8:3
    chip-ID: 0a12:0001 class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 4.0
    lmp-v: 6 status: discoverable: no pairing: no class-ID: 7c0104
Logical:
  Message: No logical block device data found.
RAID:
  Hardware-1: Intel SATA Controller [RAID mode] driver: ahci v: 3.0 port: f020
    bus-ID: 00:1f.2 chip-ID: 8086:2822 rev: N/A class-ID: 0104
Drives:
  Local Storage: total: 2.63 TiB used: 1.49 TiB (56.6%)
  ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD10EZRX-00A8LB0
    family: Green size: 931.51 GiB block-size: physical: 4096 B logical: 512 B
    sata: 3.0 speed: 6.0 Gb/s tech: N/A serial: <filter> fw-rev: 1A01
    temp: 35 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 8y 338d 16h cycles: 3148
  ID-2: /dev/sdb maj-min: 8:16 vendor: SanDisk model: SDSSDH3 1T00
    family: Marvell based SSDs size: 931.51 GiB block-size: physical: 512 B
    logical: 512 B sata: 3.3 speed: 6.0 Gb/s tech: SSD serial: <filter>
    fw-rev: 20RL temp: 36 C scheme: GPT
  SMART: yes state: enabled health: PASSED on: 2y 122d 23h cycles: 1336
  ID-3: /dev/sdc maj-min: 8:32 vendor: Western Digital
    model: WD6400AAKS-22A7B2 family: Caviar Blue (SATA) size: 596.17 GiB
    block-size: physical: 512 B logical: 512 B sata: 2.5 speed: 3.0 Gb/s
    tech: N/A serial: <filter> fw-rev: 3B01 temp: 42 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 8y 260d 1h cycles: 5615
  ID-4: /dev/sdd maj-min: 8:48 vendor: Maxtor model: STM3250310AS
    family: Maxtor DiamondMax 21 size: 232.89 GiB block-size: physical: 512 B
    logical: 512 B speed: 1.5 Gb/s tech: N/A serial: <filter> fw-rev: C
    temp: 40 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 7y 147d 17h cycles: 3684
    Pre-Fail: reallocated sector: 100 threshold: 36 attribute: Spin_Retry_Count
    value: 100 worst: 100 threshold: 97
  Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GH40F rev: MG01
    dev-links: cdrom
  Features: speed: 40 multisession: yes audio: yes dvd: yes
    rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
  ID-1: / raw-size: 914.07 GiB size: 898.64 GiB (98.31%)
    used: 716.05 GiB (79.7%) fs: ext4 block-size: 4096 B dev: /dev/sdb2
    maj-min: 8:18 label: N/A uuid: dbd78c17-f7c0-476f-b72a-459ec5566942
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 284 KiB (0.1%) fs: vfat block-size: 512 B dev: /dev/sdb1 maj-min: 8:17
    label: N/A uuid: 3A3E-5F87
  ID-3: /mnt/alpha raw-size: 931.07 GiB size: 931.07 GiB (100.00%)
    used: 727.08 GiB (78.1%) fs: ntfs block-size: 4096 B dev: /dev/sda1
    maj-min: 8:1 label: Almacenamiento Alpha uuid: 84B6C503B6C4F728
  ID-4: /mnt/gamma raw-size: 596.17 GiB size: 596.17 GiB (100.00%)
    used: 80.95 GiB (13.6%) fs: btrfs block-size: 4096 B dev: /dev/sdc1
    maj-min: 8:33 label: gamma uuid: 7639fefe-48f6-45aa-b7b3-4f1e1209f6e7
  ID-5: /var/lib/docker/volumes/home-swarm_nfs_publicmedia/_data
    raw-size: N/A size: 3.49 TiB used: 1.97 TiB (56.5%) fs: nfs4
    remote: :/PublicMedia
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes
    compressor: zstd max-pool: 20%
  ID-1: swap-1 type: partition size: 17.15 GiB used: 0 KiB (0.0%)
    priority: -2 dev: /dev/sdb3 maj-min: 8:19 label: N/A
    uuid: 2be7c2ef-43e1-4601-95f3-aee00991978a
Unmounted:
  ID-1: /dev/sda2 maj-min: 8:2 size: 450 MiB fs: ntfs label: N/A
    uuid: 0EAE6759AE67387B
  ID-2: /dev/sdd1 maj-min: 8:49 size: 232.88 GiB fs: btrfs label: beta
    uuid: 9e23978b-8249-4a06-ab24-e91c9297f573
USB:
  Hub-1: 1-0:1 info: full speed or root hub ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 8087:0024
    class-ID: 0900
  Device-1: 1-1.1:3 info: Realtek Mass Storage Device
    type: smart card,mass storage driver: usb-storage interfaces: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
    chip-ID: 0bda:0169 class-ID: 0806 serial: <filter>
  Device-2: 1-1.2:4 info: 2.4G Composite Devic type: keyboard,mouse
    driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 100mA chip-ID: 1507:2814 class-ID: 0301
  Hub-3: 2-0:1 info: full speed or root hub ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 8087:0024
    class-ID: 0900
  Device-1: 2-1.8:3 info: Cambridge Silicon Radio Bluetooth Dongle (HCI mode)
    type: bluetooth driver: btusb interfaces: 2 rev: 2.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 chip-ID: 0a12:0001
    class-ID: e001
  Hub-5: 3-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 3-3:2 info: Akko Keyboard type: keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 500mA chip-ID: fffe:000c class-ID: 0300
  Device-2: 3-4:3 info: Logitech G203 LIGHTSYNC Gaming Mouse type: mouse,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 300mA chip-ID: 046d:c09d class-ID: 0300
    serial: <filter>
  Hub-6: 4-0:1 info: super-speed hub ports: 4 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 45.5 C mobo: N/A gpu: nvidia temp: 54 C
  Fan Speeds (rpm): fan-1: 0 fan-2: 1180 fan-3: 0 fan-4: 0 fan-5: 0
    gpu: nvidia fan: 48%
  Power: 12v: N/A 5v: N/A 3.3v: 3.33 vbat: 3.36
Info:
  Processes: 300 Power: uptime: 1m states: freeze,mem,disk suspend: deep
    avail: s2idle wakeups: 0 hibernate: platform
    avail: shutdown,reboot,suspend,test_resume image: 6.22 GiB Init: systemd
    v: 255 default: graphical tool: systemctl
  Packages: 2963 pm: dpkg pkgs: 0 pm: nix-default pkgs: 0 pm: nix-sys pkgs: 0
    pm: nix-usr pkgs: 0 pm: pacman pkgs: 2943 libs: 575 tools: pamac,yay
    pm: flatpak pkgs: 20 Compilers: clang: 16.0.6 gcc: 13.2.1 alt: 12
    Shell: Sudo (sudo) v: 1.9.15p5 default: Bash v: 5.2.21
    running-in: alacritty inxi: 3.3.32
$ # After unplugging and plugging again
$ sudo inxi --admin --verbosity=7 --filter --no-host --width
System:
  Kernel: 6.6.10-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc avail: hpet,acpi_pm
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64
    root=UUID=dbd78c17-f7c0-476f-b72a-459ec5566942 rw quiet
    udev.log_priority=3
  Desktop: bspwm v: 0.9.10 with: polybar tools: light-locker avail: i3lock
    dm: LightDM v: 1.32.0 Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: ASUSTeK model: P8Z77-V LX v: Rev X.0x serial: <filter>
    part-nu: SKU uuid: 21804fa0-d7da-11dd-991e-50465d57cff2
    UEFI: American Megatrends v: 1201 date: 08/17/2012
Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 16 GiB available: 15.57 GiB used: 5.48 GiB (35.2%)
  Array-1: capacity: 32 GiB slots: 4 modules: 2 EC: None
    max-module-size: 8 GiB note: est.
  Device-1: ChannelA-DIMM0 type: DDR3 detail: synchronous size: 8 GiB
    speed: 1600 MT/s volts: N/A width (bits): data: 64 total: 64
    manufacturer: Kingston part-no: 99U5471-056.A00LF serial: <filter>
  Device-2: ChannelA-DIMM1 type: no module installed
  Device-3: ChannelB-DIMM0 type: DDR3 detail: synchronous size: 8 GiB
    speed: 1600 MT/s volts: N/A width (bits): data: 64 total: 64
    manufacturer: Kingston part-no: 99U5471-054.A00LF serial: <filter>
  Device-4: ChannelB-DIMM1 type: no module installed
CPU:
  Info: model: Intel Core i7-3770 socket: LGA1155 bits: 64 type: MT MCP
    arch: Ivy Bridge gen: core 3 level: v2 built: 2012-15 process: Intel 22nm
    family: 6 model-id: 0x3A (58) stepping: 9 microcode: 0x21
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
    L3: 8 MiB desc: 1x8 MiB
  Speed (MHz): avg: 3554 high: 3907 min/max: 1600/3900 base/boost: 3400/3800
    scaling: driver: intel_cpufreq governor: schedutil volts: 1.0 V
    ext-clock: 100 MHz cores: 1: 3859 2: 3873 3: 3907 4: 3792 5: 3778 6: 3756
    7: 3868 8: 1600 bogomips: 54576
  Flags: acpi aes aperfmperf apic arat arch_perfmon avx bts clflush cmov
    constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb
    ept erms est f16c flexpriority flush_l1d fpu fsgsbase fxsr ht ibpb ibrs
    ida lahf_lm lm mca mce md_clear mmx monitor msr mtrr nonstop_tsc nopl nx
    pae pat pbe pcid pclmulqdq pdcm pebs pge pln pni popcnt pse pse36 pti pts
    rdrand rdtscp rep_good sep smep smx ss ssbd sse sse2 sse4_1 sse4_2 ssse3
    stibp syscall tm tm2 tpr_shadow tsc tsc_deadline_timer vme vmx vnmi vpid
    x2apic xsave xsaveopt xtopology xtpr
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
    vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
    STIBP: conditional, RSB filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Vulnerable: No microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA GK104 [GeForce GTX 760] vendor: ASUSTeK driver: nvidia
    v: 470.223.02 alternate: nouveau,nvidia_drm non-free: series: 470.xx+
    status: legacy-active (EOL~2024-09-xx) arch: Kepler code: GKxxx
    process: TSMC 28nm built: 2012-2018 pcie: gen: 3 speed: 8 GT/s lanes: 16
    bus-ID: 01:00.0 chip-ID: 10de:1187 class-ID: 0300
  Display: x11 server: X.Org v: 21.1.10 compositor: Picom v: git-b700a
    driver: X: loaded: nvidia gpu: nvidia display-ID: :0 screens: 1
  Screen-1: 0 s-res: 2688x1848 s-dpi: 102 s-size: 669x460mm (26.34x18.11")
    s-diag: 812mm (31.96")
  Monitor-1: DP-0 pos: middle-r res: 768x1360 hz: 60 dpi: 30
    size: 650x1150mm (25.59x45.28") diag: 1321mm (52.01") modes: N/A
  Monitor-2: DVI-I-0 pos: top-center res: 1366x768 hz: 60 dpi: 101
    size: 344x193mm (13.54x7.6") diag: 394mm (15.53") modes: N/A
  Monitor-3: HDMI-0 pos: primary,bottom-l res: 1920x1080 hz: 60 dpi: 96
    size: 510x290mm (20.08x11.42") diag: 587mm (23.1") modes: N/A
  API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia device: 2
    drv: swrast gbm: drv: kms_swrast surfaceless: drv: swrast x11: drv: nvidia
    inactive: wayland,device-1
  API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 470.223.02
    glx-v: 1.4 direct-render: yes renderer: NVIDIA GeForce GTX 760/PCIe/SSE2
    memory: 1.95 GiB
Audio:
  Device-1: Intel 7 Series/C216 Family High Definition Audio
    vendor: ASUSTeK P8Z77-V LX driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
    chip-ID: 8086:1e20 class-ID: 0403
  Device-2: NVIDIA GK104 HDMI Audio vendor: ASUSTeK driver: snd_hda_intel
    v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 01:00.1
    chip-ID: 10de:0e0a class-ID: 0403
  API: ALSA v: k6.6.10-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: PipeWire v: 1.0.0 status: n/a (root, process) with:
    1: pipewire-pulse status: active 2: wireplumber status: active
    3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: ASUSTeK P8P67 and other motherboards driver: r8169 v: kernel pcie:
    gen: 1 speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 03:00.0
    chip-ID: 10ec:8168 class-ID: 0200
  IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: noprefixroute scope: global broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  IF-ID-1: br-bdde47fbe98c state: down mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IF-ID-2: docker0 state: down mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IF-ID-3: docker_gwbridge state: up speed: 10000 Mbps duplex: unknown
    mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IP v6: <filter> virtual: proto kernel_ll scope: link
  IF-ID-4: veth7ba4790 state: up speed: 10000 Mbps duplex: full mac: <filter>
  IF-ID-5: vethe710185 state: up speed: 10000 Mbps duplex: full mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) driver: btusb
    v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-1.8:3
    chip-ID: 0a12:0001 class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 4.0
    lmp-v: 6 status: discoverable: no pairing: no class-ID: 7c0104
Logical:
  Message: No logical block device data found.
RAID:
  Hardware-1: Intel SATA Controller [RAID mode] driver: ahci v: 3.0 port: f020
    bus-ID: 00:1f.2 chip-ID: 8086:2822 rev: N/A class-ID: 0104
Drives:
  Local Storage: total: 2.63 TiB used: 1.49 TiB (56.6%)
  ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD10EZRX-00A8LB0
    family: Green size: 931.51 GiB block-size: physical: 4096 B logical: 512 B
    sata: 3.0 speed: 6.0 Gb/s tech: N/A serial: <filter> fw-rev: 1A01
    temp: 35 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 8y 338d 15h cycles: 3146
  ID-2: /dev/sdb maj-min: 8:16 vendor: SanDisk model: SDSSDH3 1T00
    family: Marvell based SSDs size: 931.51 GiB block-size: physical: 512 B
    logical: 512 B sata: 3.3 speed: 6.0 Gb/s tech: SSD serial: <filter>
    fw-rev: 20RL temp: 33 C scheme: GPT
  SMART: yes state: enabled health: PASSED on: 2y 122d 22h cycles: 1334
  ID-3: /dev/sdc maj-min: 8:32 vendor: Western Digital
    model: WD6400AAKS-22A7B2 family: Caviar Blue (SATA) size: 596.17 GiB
    block-size: physical: 512 B logical: 512 B sata: 2.5 speed: 3.0 Gb/s
    tech: N/A serial: <filter> fw-rev: 3B01 temp: 41 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 8y 260d 1h cycles: 5613
  ID-4: /dev/sdd maj-min: 8:48 vendor: Maxtor model: STM3250310AS
    family: Maxtor DiamondMax 21 size: 232.89 GiB block-size: physical: 512 B
    logical: 512 B speed: 1.5 Gb/s tech: N/A serial: <filter> fw-rev: C
    temp: 39 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 7y 147d 17h cycles: 3682
    Pre-Fail: reallocated sector: 100 threshold: 36 attribute: Spin_Retry_Count
    value: 100 worst: 100 threshold: 97
  Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GH40F rev: MG01
    dev-links: cdrom
  Features: speed: 40 multisession: yes audio: yes dvd: yes
    rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
  ID-1: / raw-size: 914.07 GiB size: 898.64 GiB (98.31%)
    used: 716.2 GiB (79.7%) fs: ext4 block-size: 4096 B dev: /dev/sdb2
    maj-min: 8:18 label: N/A uuid: dbd78c17-f7c0-476f-b72a-459ec5566942
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 284 KiB (0.1%) fs: vfat block-size: 512 B dev: /dev/sdb1 maj-min: 8:17
    label: N/A uuid: 3A3E-5F87
  ID-3: /mnt/alpha raw-size: 931.07 GiB size: 931.07 GiB (100.00%)
    used: 727.08 GiB (78.1%) fs: ntfs block-size: 4096 B dev: /dev/sda1
    maj-min: 8:1 label: Almacenamiento Alpha uuid: 84B6C503B6C4F728
  ID-4: /mnt/gamma raw-size: 596.17 GiB size: 596.17 GiB (100.00%)
    used: 80.95 GiB (13.6%) fs: btrfs block-size: 4096 B dev: /dev/sdc1
    maj-min: 8:33 label: gamma uuid: 7639fefe-48f6-45aa-b7b3-4f1e1209f6e7
  ID-5: /var/lib/docker/volumes/home-swarm_nfs_publicmedia/_data
    raw-size: N/A size: 3.49 TiB used: 1.97 TiB (56.5%) fs: nfs4
    remote: :/PublicMedia
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes
    compressor: zstd max-pool: 20%
  ID-1: swap-1 type: partition size: 17.15 GiB used: 512 MiB (2.9%)
    priority: -2 dev: /dev/sdb3 maj-min: 8:19 label: N/A
    uuid: 2be7c2ef-43e1-4601-95f3-aee00991978a
Unmounted:
  ID-1: /dev/sda2 maj-min: 8:2 size: 450 MiB fs: ntfs label: N/A
    uuid: 0EAE6759AE67387B
  ID-2: /dev/sdd1 maj-min: 8:49 size: 232.88 GiB fs: btrfs label: beta
    uuid: 9e23978b-8249-4a06-ab24-e91c9297f573
USB:
  Hub-1: 1-0:1 info: full speed or root hub ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 8087:0024
    class-ID: 0900
  Device-1: 1-1.8:3 info: Cambridge Silicon Radio Bluetooth Dongle (HCI mode)
    type: bluetooth driver: btusb interfaces: 2 rev: 2.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 chip-ID: 0a12:0001
    class-ID: e001
  Hub-3: 2-0:1 info: full speed or root hub ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 8087:0024
    class-ID: 0900
  Device-1: 2-1.1:3 info: Realtek Mass Storage Device
    type: smart card,mass storage driver: usb-storage,usbfs interfaces: 2
    rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
    chip-ID: 0bda:0169 class-ID: 0806 serial: <filter>
  Device-2: 2-1.2:4 info: 2.4G Composite Devic type: keyboard,mouse
    driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 100mA chip-ID: 1507:2814 class-ID: 0301
  Hub-5: 3-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 3-3:4 info: Akko Keyboard type: keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 500mA chip-ID: fffe:000c class-ID: 0300
  Device-2: 3-4:3 info: Logitech G203 LIGHTSYNC Gaming Mouse type: mouse,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 300mA chip-ID: 046d:c09d class-ID: 0300
    serial: <filter>
  Hub-6: 4-0:1 info: super-speed hub ports: 4 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 38.0 C mobo: N/A gpu: nvidia temp: 47 C
  Fan Speeds (rpm): fan-1: 0 fan-2: 915 fan-3: 0 fan-4: 0 fan-5: 0
    gpu: nvidia fan: 34%
  Power: 12v: N/A 5v: N/A 3.3v: 3.33 vbat: 3.36
Info:
  Processes: 345 Power: uptime: 23h 33m states: freeze,mem,disk suspend: deep
    avail: s2idle wakeups: 1 hibernate: platform
    avail: shutdown,reboot,suspend,test_resume image: 6.22 GiB daemons: upowerd
    Init: systemd v: 255 default: graphical tool: systemctl
  Packages: 2963 pm: dpkg pkgs: 0 pm: nix-default pkgs: 0 pm: nix-sys pkgs: 0
    pm: nix-usr pkgs: 0 pm: pacman pkgs: 2943 libs: 575 tools: pamac,yay
    pm: flatpak pkgs: 20 Compilers: clang: 16.0.6 gcc: 13.2.1 alt: 12
    Shell: Sudo (sudo) v: 1.9.15p5 default: Bash v: 5.2.21
    running-in: alacritty inxi: 3.3.32

Dmesg

[    0.000000] microcode: updated early: 0x12 -> 0x21, date = 2019-02-13
[    0.000000] Linux version 6.6.10-1-MANJARO (builduser@fv-az1496-324) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.41.0) #1 SMP PREEMPT_DYNAMIC Fri Jan  5 17:38:36 UTC 2024
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64 root=UUID=dbd78c17-f7c0-476f-b72a-459ec5566942 rw quiet udev.log_priority=3
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ddb49fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ddb4a000-0x00000000de145fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000de146000-0x00000000de155fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000de156000-0x00000000de27cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000de27d000-0x00000000de7a4fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000de7a5000-0x00000000de830fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000de831000-0x00000000de831fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000de832000-0x00000000de874fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000de875000-0x00000000dec94fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dec95000-0x00000000deff3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] efi: EFI v2.3.1 by American Megatrends
[    0.000000] efi: ACPI=0xde149000 ACPI 2.0=0xde149000 SMBIOS=0xf04c0
[    0.000000] efi: Remove mem47: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map
[    0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved
[    0.000000] efi: Not removing mem48: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem49: MMIO range=[0xfed00000-0xfed03fff] (16KB) from e820 map
[    0.000000] efi: Not removing mem50: MMIO range=[0xfed1c000-0xfed1ffff] (16KB) from e820 map
[    0.000000] efi: Not removing mem51: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[    0.000000] efi: Remove mem52: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[    0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: System manufacturer System Product Name/P8Z77-V LX, BIOS 1201 08/17/2012
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3409.830 MHz processor
[    0.001311] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001314] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001321] last_pfn = 0x41f000 max_arch_pfn = 0x400000000
[    0.001327] total RAM covered: 16368M
[    0.001502] Found optimal setting for mtrr clean up
[    0.001502]  gran_size: 64K 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 0G
[    0.001506] MTRR map: 8 entries (5 fixed + 3 variable; max 25), built from 10 variable MTRRs
[    0.001508] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.001933] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.001936] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.010039] found SMP MP-table at [mem 0x000fd850-0x000fd85f]
[    0.010557] Secure boot disabled
[    0.010558] RAMDISK: [mem 0x359dd000-0x36ce5fff]
[    0.010563] ACPI: Early table checksum verification disabled
[    0.010566] ACPI: RSDP 0x00000000DE149000 000024 (v02 ALASKA)
[    0.010570] ACPI: XSDT 0x00000000DE149080 000074 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.010575] ACPI: FACP 0x00000000DE153BE0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.010580] ACPI: DSDT 0x00000000DE149188 00AA56 (v02 ALASKA A M I    00000021 INTL 20051117)
[    0.010583] ACPI: FACS 0x00000000DE27B080 000040
[    0.010586] ACPI: APIC 0x00000000DE153CF0 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.010588] ACPI: FPDT 0x00000000DE153D88 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.010591] ACPI: MCFG 0x00000000DE153DD0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.010594] ACPI: HPET 0x00000000DE153E10 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.010597] ACPI: SSDT 0x00000000DE153E48 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.010600] ACPI: SSDT 0x00000000DE1541B8 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.010603] ACPI: SSDT 0x00000000DE154B68 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.010605] ACPI: BGRT 0x00000000DE1556D8 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.010608] ACPI: DMAR 0x00000000DE155658 000080 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.010610] ACPI: Reserving FACP table memory at [mem 0xde153be0-0xde153ceb]
[    0.010612] ACPI: Reserving DSDT table memory at [mem 0xde149188-0xde153bdd]
[    0.010613] ACPI: Reserving FACS table memory at [mem 0xde27b080-0xde27b0bf]
[    0.010613] ACPI: Reserving APIC table memory at [mem 0xde153cf0-0xde153d81]
[    0.010614] ACPI: Reserving FPDT table memory at [mem 0xde153d88-0xde153dcb]
[    0.010615] ACPI: Reserving MCFG table memory at [mem 0xde153dd0-0xde153e0b]
[    0.010615] ACPI: Reserving HPET table memory at [mem 0xde153e10-0xde153e47]
[    0.010616] ACPI: Reserving SSDT table memory at [mem 0xde153e48-0xde1541b4]
[    0.010617] ACPI: Reserving SSDT table memory at [mem 0xde1541b8-0xde154b61]
[    0.010618] ACPI: Reserving SSDT table memory at [mem 0xde154b68-0xde1555f9]
[    0.010618] ACPI: Reserving BGRT table memory at [mem 0xde1556d8-0xde15570f]
[    0.010619] ACPI: Reserving DMAR table memory at [mem 0xde155658-0xde1556d7]
[    0.010667] No NUMA configuration found
[    0.010668] Faking a node at [mem 0x0000000000000000-0x000000041effffff]
[    0.010671] NODE_DATA(0) allocated [mem 0x41eff0000-0x41eff4fff]
[    0.010698] Zone ranges:
[    0.010699]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.010700]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.010702]   Normal   [mem 0x0000000100000000-0x000000041effffff]
[    0.010703]   Device   empty
[    0.010704] Movable zone start for each node
[    0.010704] Early memory node ranges
[    0.010705]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.010706]   node   0: [mem 0x0000000000100000-0x00000000ddb49fff]
[    0.010707]   node   0: [mem 0x00000000de831000-0x00000000de831fff]
[    0.010708]   node   0: [mem 0x00000000de875000-0x00000000dec94fff]
[    0.010709]   node   0: [mem 0x00000000deff4000-0x00000000deffffff]
[    0.010709]   node   0: [mem 0x0000000100000000-0x000000041effffff]
[    0.010712] Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
[    0.010715] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.010734] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.016234] On node 0, zone DMA32: 3303 pages in unavailable ranges
[    0.016245] On node 0, zone DMA32: 67 pages in unavailable ranges
[    0.016254] On node 0, zone DMA32: 863 pages in unavailable ranges
[    0.036672] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.036712] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.036808] ACPI: PM-Timer IO Port: 0x408
[    0.036815] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.036826] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.036828] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.036830] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.036834] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.036835] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.036840] efi_bgrt: Ignoring BGRT: invalid image address
[    0.036841] TSC deadline timer available
[    0.036842] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.036857] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.036859] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.036860] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.036861] PM: hibernation: Registered nosave memory: [mem 0xddb4a000-0xde145fff]
[    0.036862] PM: hibernation: Registered nosave memory: [mem 0xde146000-0xde155fff]
[    0.036863] PM: hibernation: Registered nosave memory: [mem 0xde156000-0xde27cfff]
[    0.036864] PM: hibernation: Registered nosave memory: [mem 0xde27d000-0xde7a4fff]
[    0.036864] PM: hibernation: Registered nosave memory: [mem 0xde7a5000-0xde830fff]
[    0.036865] PM: hibernation: Registered nosave memory: [mem 0xde832000-0xde874fff]
[    0.036867] PM: hibernation: Registered nosave memory: [mem 0xdec95000-0xdeff3fff]
[    0.036868] PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xfebfffff]
[    0.036869] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.036869] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.036870] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.036871] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.036871] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.036872] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.036873] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.036873] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[    0.036875] [mem 0xdf000000-0xfebfffff] available for PCI devices
[    0.036876] Booting paravirtualized kernel on bare hardware
[    0.036878] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.041568] setup_percpu: NR_CPUS:320 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.041930] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[    0.041935] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[    0.041937] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.041954] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64 root=UUID=dbd78c17-f7c0-476f-b72a-459ec5566942 rw quiet udev.log_priority=3
[    0.042016] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64", will be passed to user space.
[    0.042033] random: crng init done
[    0.043632] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.044448] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.044557] Fallback order for Node 0: 0
[    0.044560] Built 1 zonelists, mobility grouping on.  Total pages: 4116281
[    0.044561] Policy zone: Normal
[    0.044801] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.044809] software IO TLB: area num 8.
[    0.093879] Memory: 16111532K/16727124K available (16384K kernel code, 2150K rwdata, 13148K rodata, 3424K init, 3784K bss, 615332K reserved, 0K cma-reserved)
[    0.094110] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.094121] Kernel/User page tables isolation: enabled
[    0.094153] ftrace: allocating 49011 entries in 192 pages
[    0.101105] ftrace: allocated 192 pages with 2 groups
[    0.101169] Dynamic Preempt: full
[    0.101212] rcu: Preemptible hierarchical RCU implementation.
[    0.101213] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.101213] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.101214] 	Trampoline variant of Tasks RCU enabled.
[    0.101215] 	Rude variant of Tasks RCU enabled.
[    0.101215] 	Tracing variant of Tasks RCU enabled.
[    0.101216] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.101217] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.103767] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.103948] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.104058] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.104087] Console: colour dummy device 80x25
[    0.104089] printk: console [tty0] enabled
[    0.104128] ACPI: Core revision 20230628
[    0.104197] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.104209] APIC: Switch to symmetric I/O mode setup
[    0.104210] DMAR: Host address width 36
[    0.104211] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[    0.104216] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.104218] DMAR: RMRR base: 0x000000de0bd000 end: 0x000000de0d9fff
[    0.104220] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed90000 IOMMU 0
[    0.104221] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[    0.104222] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.104489] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.104491] x2apic enabled
[    0.104542] APIC: Switched APIC routing to: cluster x2apic
[    0.104958] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.120876] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x312694bc765, max_idle_ns: 440795292811 ns
[    0.120881] Calibrating delay loop (skipped), value calculated using timer frequency.. 6822.81 BogoMIPS (lpj=11366100)
[    0.120901] CPU0: Thermal monitoring enabled (TM1)
[    0.120918] process: using mwait in idle threads
[    0.120921] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.120922] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.120924] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.120926] Spectre V2 : Mitigation: Retpolines
[    0.120927] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.120928] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.120928] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.120930] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.120930] Spectre V2 : User space: Mitigation: STIBP via prctl
[    0.120932] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.120934] MDS: Mitigation: Clear CPU buffers
[    0.120934] MMIO Stale Data: Unknown: No mitigations
[    0.120935] SRBDS: Vulnerable: No microcode
[    0.120939] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.120940] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.120941] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.120942] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.120943] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.137345] Freeing SMP alternatives memory: 40K
[    0.137349] pid_max: default: 32768 minimum: 301
[    0.141325] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[    0.141347] landlock: Up and running.
[    0.141349] Yama: becoming mindful.
[    0.141353] LSM support for eBPF active
[    0.141384] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.141399] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.144265] smpboot: CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.144434] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.144450] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.144463] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.144482] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.144497] ... version:                3
[    0.144497] ... bit width:              48
[    0.144498] ... generic registers:      4
[    0.144499] ... value mask:             0000ffffffffffff
[    0.144499] ... max period:             00007fffffffffff
[    0.144500] ... fixed-purpose events:   3
[    0.144501] ... event mask:             000000070000000f
[    0.144622] signal: max sigframe size: 1776
[    0.144637] Estimated ratio of average max frequency by base frequency (times 1024): 1114
[    0.144660] rcu: Hierarchical SRCU implementation.
[    0.144661] rcu: 	Max phase no-delay instances is 1000.
[    0.145214] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.145287] smp: Bringing up secondary CPUs ...
[    0.145388] smpboot: x86: Booting SMP configuration:
[    0.145390] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.152886] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.157580] smp: Brought up 1 node, 8 CPUs
[    0.157580] smpboot: Max logical packages: 1
[    0.157580] smpboot: Total of 8 processors activated (54579.50 BogoMIPS)
[    0.160516] devtmpfs: initialized
[    0.160516] x86/mm: Memory block size: 128MB
[    0.161679] ACPI: PM: Registering ACPI NVS region [mem 0xde156000-0xde27cfff] (1208320 bytes)
[    0.161679] ACPI: PM: Registering ACPI NVS region [mem 0xde832000-0xde874fff] (274432 bytes)
[    0.161679] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.161679] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.161679] pinctrl core: initialized pinctrl subsystem
[    0.161679] PM: RTC time: 18:34:16, date: 2024-02-18
[    0.161679] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.161679] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.161782] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.161890] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.161916] audit: initializing netlink subsys (disabled)
[    0.161935] audit: type=2000 audit(1708281255.056:1): state=initialized audit_enabled=0 res=1
[    0.161935] thermal_sys: Registered thermal governor 'fair_share'
[    0.161935] thermal_sys: Registered thermal governor 'bang_bang'
[    0.161935] thermal_sys: Registered thermal governor 'step_wise'
[    0.161935] thermal_sys: Registered thermal governor 'user_space'
[    0.161935] thermal_sys: Registered thermal governor 'power_allocator'
[    0.161935] cpuidle: using governor ladder
[    0.161935] cpuidle: using governor menu
[    0.161935] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.161935] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.161935] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.161935] PCI: not using MMCONFIG
[    0.161935] PCI: Using configuration type 1 for base access
[    0.161935] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.161935] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.161935] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.161935] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.161935] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.161935] ACPI: Added _OSI(Module Device)
[    0.161935] ACPI: Added _OSI(Processor Device)
[    0.161935] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.161935] ACPI: Added _OSI(Processor Aggregator Device)
[    0.169311] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.170939] ACPI: Dynamic OEM Table Load:
[    0.170947] ACPI: SSDT 0xFFFF946880E80000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.171782] ACPI: Dynamic OEM Table Load:
[    0.171788] ACPI: SSDT 0xFFFF94688191AC00 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.172452] ACPI: Dynamic OEM Table Load:
[    0.172456] ACPI: SSDT 0xFFFF9468818CDC00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.174610] ACPI: _OSC evaluated successfully for all CPUs
[    0.174881] ACPI: Interpreter enabled
[    0.174903] ACPI: PM: (supports S0 S3 S4 S5)
[    0.174905] ACPI: Using IOAPIC for interrupt routing
[    0.175566] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.176346] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved as ACPI motherboard resource
[    0.176356] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.176357] PCI: Using E820 reservations for host bridge windows
[    0.176684] ACPI: Enabled 10 GPEs in block 00 to 3F
[    0.186114] ACPI: \_TZ_.FN00: New power resource
[    0.186206] ACPI: \_TZ_.FN01: New power resource
[    0.186295] ACPI: \_TZ_.FN02: New power resource
[    0.186383] ACPI: \_TZ_.FN03: New power resource
[    0.186471] ACPI: \_TZ_.FN04: New power resource
[    0.187339] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.187346] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.187554] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.187776] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC]
[    0.187779] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.188600] PCI host bridge to bus 0000:00
[    0.188602] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.188605] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.188607] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.188609] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.188611] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.188613] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.188629] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[    0.188700] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.188737] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.188853] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.188873] pci 0000:00:14.0: reg 0x10: [mem 0xf7100000-0xf710ffff 64bit]
[    0.188942] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.189023] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.189042] pci 0000:00:16.0: reg 0x10: [mem 0xf711a000-0xf711a00f 64bit]
[    0.189110] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.189166] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.189181] pci 0000:00:1a.0: reg 0x10: [mem 0xf7118000-0xf71183ff]
[    0.189260] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.189337] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.189351] pci 0000:00:1b.0: reg 0x10: [mem 0xf7110000-0xf7113fff 64bit]
[    0.189416] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.189512] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.189664] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.189773] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[    0.189859] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.189946] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
[    0.190033] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.190116] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.190131] pci 0000:00:1d.0: reg 0x10: [mem 0xf7117000-0xf71173ff]
[    0.190210] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.190283] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
[    0.190449] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
[    0.190461] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.190467] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.190474] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.190480] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.190486] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.190493] pci 0000:00:1f.2: reg 0x24: [mem 0xf7116000-0xf71167ff]
[    0.190529] pci 0000:00:1f.2: PME# supported from D3hot
[    0.190588] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.190604] pci 0000:00:1f.3: reg 0x10: [mem 0xf7115000-0xf71150ff 64bit]
[    0.190622] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.190716] pci 0000:01:00.0: [10de:1187] type 00 class 0x030000
[    0.190725] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.190733] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[    0.190742] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.190747] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.190753] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.190757] pci 0000:01:00.0: enabling Extended Tags
[    0.190769] pci 0000:01:00.0: BAR 3: assigned to efifb
[    0.190772] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.190826] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.190872] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
[    0.190882] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.190906] pci 0000:01:00.1: enabling Extended Tags
[    0.190983] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.190986] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.190987] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.190990] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.191049] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.191131] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.191155] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.191186] pci 0000:03:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[    0.191206] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    0.191331] pci 0000:03:00.0: supports D1 D2
[    0.191332] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.191508] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.191511] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.191518] pci 0000:00:1c.4:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.191583] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[    0.191770] pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode)
[    0.191780] pci 0000:00:1c.5:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.191782] pci 0000:00:1c.5:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.191783] pci 0000:00:1c.5:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.191784] pci 0000:00:1c.5:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.191785] pci 0000:00:1c.5:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.191816] pci_bus 0000:05: extended config space not accessible
[    0.191896] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[    0.191917] pci 0000:04:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.191918] pci 0000:04:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.191919] pci 0000:04:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.191920] pci 0000:04:00.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.191922] pci 0000:04:00.0:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.192418] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.192467] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.192514] ACPI: PCI: Interrupt link LNKC configured for IRQ 10
[    0.192561] ACPI: PCI: Interrupt link LNKD configured for IRQ 3
[    0.192608] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.192609] ACPI: PCI: Interrupt link LNKE disabled
[    0.192655] ACPI: PCI: Interrupt link LNKF configured for IRQ 5
[    0.192702] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.192750] ACPI: PCI: Interrupt link LNKH configured for IRQ 6
[    0.194245] iommu: Default domain type: Translated
[    0.194245] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.194355] SCSI subsystem initialized
[    0.194361] libata version 3.00 loaded.
[    0.194361] ACPI: bus type USB registered
[    0.194361] usbcore: registered new interface driver usbfs
[    0.194361] usbcore: registered new interface driver hub
[    0.194361] usbcore: registered new device driver usb
[    0.194361] pps_core: LinuxPPS API ver. 1 registered
[    0.194361] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.194361] PTP clock support registered
[    0.194361] EDAC MC: Ver: 3.0.0
[    0.194361] efivars: Registered efivars operations
[    0.194378] NetLabel: Initializing
[    0.194379] NetLabel:  domain hash size = 128
[    0.194380] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.194392] NetLabel:  unlabeled traffic allowed by default
[    0.194396] mctp: management component transport protocol core
[    0.194397] NET: Registered PF_MCTP protocol family
[    0.194400] PCI: Using ACPI for IRQ routing
[    0.195040] PCI: pci_cache_line_size set to 64 bytes
[    0.195080] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.195082] e820: reserve RAM buffer [mem 0xddb4a000-0xdfffffff]
[    0.195083] e820: reserve RAM buffer [mem 0xde832000-0xdfffffff]
[    0.195084] e820: reserve RAM buffer [mem 0xdec95000-0xdfffffff]
[    0.195085] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.195086] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
[    0.197569] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.197569] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.197569] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.197569] vgaarb: loaded
[    0.198579] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.198587] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.200593] clocksource: Switched to clocksource tsc-early
[    0.200699] VFS: Disk quotas dquot_6.6.0
[    0.200715] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.200790] pnp: PnP ACPI init
[    0.200879] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.200911] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.200913] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.200915] system 00:01: [io  0xffff] has been reserved
[    0.200916] system 00:01: [io  0xffff] has been reserved
[    0.200917] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.200919] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.200920] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.200921] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.200985] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.201070] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.201115] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.201319] pnp 00:06: [dma 0 disabled]
[    0.201532] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.201535] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.201536] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.201538] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.201539] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.201541] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.201542] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.201544] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.201545] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.201546] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.201548] system 00:07: [mem 0xe0000000-0xe0000fff] has been reserved
[    0.201661] pnp: PnP ACPI: found 8 devices
[    0.207199] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.207254] NET: Registered PF_INET protocol family
[    0.207369] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.209986] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.210012] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.210062] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.210238] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.210456] TCP: Hash tables configured (established 131072 bind 65536)
[    0.210522] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.210560] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.210595] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.210643] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.210649] NET: Registered PF_XDP protocol family
[    0.210659] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.210663] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.210665] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.210667] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.210670] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.210686] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.210688] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.210694] pci 0000:00:1c.4:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.210699] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.210717] pci 0000:00:1c.5: PCI bridge to [bus 04-05]
[    0.210727] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.210729] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.210730] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.210731] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff window]
[    0.210733] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfeafffff window]
[    0.210734] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.210735] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.210736] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.210737] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.210738] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.210740] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.210741] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.210742] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.210743] pci_bus 0000:04: resource 7 [mem 0x000dc000-0x000dffff window]
[    0.210745] pci_bus 0000:04: resource 8 [mem 0xe0000000-0xfeafffff window]
[    0.210746] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.210747] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.210748] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.210749] pci_bus 0000:05: resource 7 [mem 0x000dc000-0x000dffff window]
[    0.210750] pci_bus 0000:05: resource 8 [mem 0xe0000000-0xfeafffff window]
[    0.211286] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[    0.211309] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.211317] pci 0000:03:00.0: CLS mismatch (64 != 32), using 64 bytes
[    0.211319] pci 0000:04:00.0: Disabling ASPM L0s/L1
[    0.211333] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.211334] software IO TLB: mapped [mem 0x00000000cde17000-0x00000000d1e17000] (64MB)
[    0.211369] Trying to unpack rootfs image as initramfs...
[    0.221377] Initialise system trusted keyrings
[    0.221387] Key type blacklist registered
[    0.221425] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.221433] zbud: loaded
[    0.221556] integrity: Platform Keyring initialized
[    0.221559] integrity: Machine keyring initialized
[    0.228914] Key type asymmetric registered
[    0.228916] Asymmetric key parser 'x509' registered
[    0.228928] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.228962] io scheduler mq-deadline registered
[    0.228965] io scheduler kyber registered
[    0.228976] io scheduler bfq registered
[    0.229628] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.230031] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.230075] ACPI: button: Power Button [PWRB]
[    0.230101] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.230135] ACPI: button: Power Button [PWRF]
[    0.230754] thermal LNXTHERM:00: registered as thermal_zone0
[    0.230757] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    0.230998] thermal LNXTHERM:01: registered as thermal_zone1
[    0.231000] ACPI: thermal: Thermal Zone [TZ01] (30 C)
[    0.231125] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.231289] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.233023] Non-volatile memory driver v1.3
[    0.233025] Linux agpgart interface v0.103
[    0.233046] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.233088] ACPI: bus type drm_connector registered
[    0.233394] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    0.233643] fbcon: Deferring console take-over
[    0.233645] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.234173] ahci 0000:00:1f.2: version 3.0
[    0.247587] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
[    0.247592] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[    0.298076] scsi host0: ahci
[    0.298338] scsi host1: ahci
[    0.298490] scsi host2: ahci
[    0.298606] scsi host3: ahci
[    0.298715] scsi host4: ahci
[    0.298786] scsi host5: ahci
[    0.298813] ata1: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116100 irq 26
[    0.298816] ata2: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116180 irq 26
[    0.298817] ata3: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116200 irq 26
[    0.298818] ata4: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116280 irq 26
[    0.298820] ata5: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116300 irq 26
[    0.298821] ata6: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116380 irq 26
[    0.298913] usbcore: registered new interface driver usbserial_generic
[    0.298917] usbserial: USB Serial support registered for generic
[    0.298993] rtc_cmos 00:02: RTC can wake from S4
[    0.299195] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.299202] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.299214] ehci-pci 0000:00:1d.0: debug port 2
[    0.299222] rtc_cmos 00:02: registered as rtc0
[    0.299265] rtc_cmos 00:02: setting system clock to 2024-02-18T18:34:16 UTC (1708281256)
[    0.299290] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.303133] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7117000
[    0.303180] intel_pstate: Intel P-state driver initializing
[    0.303492] ledtrig-cpu: registered to indicate activity on CPUs
[    0.303721] hid: raw HID events driver (C) Jiri Kosina
[    0.303796] drop_monitor: Initializing network drop monitor service
[    0.314102] Initializing XFRM netlink socket
[    0.314135] NET: Registered PF_INET6 protocol family
[    0.314228] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.314355] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    0.314359] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.314360] usb usb1: Product: EHCI Host Controller
[    0.314361] usb usb1: Manufacturer: Linux 6.6.10-1-MANJARO ehci_hcd
[    0.314362] usb usb1: SerialNumber: 0000:00:1d.0
[    0.314551] hub 1-0:1.0: USB hub found
[    0.314591] hub 1-0:1.0: 2 ports detected
[    0.314780] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.314785] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2
[    0.314795] ehci-pci 0000:00:1a.0: debug port 2
[    0.318724] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7118000
[    0.330895] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.331201] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    0.331204] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.331206] usb usb2: Product: EHCI Host Controller
[    0.331207] usb usb2: Manufacturer: Linux 6.6.10-1-MANJARO ehci_hcd
[    0.331208] usb usb2: SerialNumber: 0000:00:1a.0
[    0.331410] hub 2-0:1.0: USB hub found
[    0.331444] hub 2-0:1.0: 2 ports detected
[    0.348986] Freeing initrd memory: 19492K
[    0.354331] Segment Routing with IPv6
[    0.354342] RPL Segment Routing with IPv6
[    0.354364] In-situ OAM (IOAM) with IPv6
[    0.354389] NET: Registered PF_PACKET protocol family
[    0.355375] microcode: Microcode Update Driver: v2.2.
[    0.355380] IPI shorthand broadcast: enabled
[    0.356672] sched_clock: Marking stable (355139214, 233122)->(373595688, -18223352)
[    0.356881] registered taskstats version 1
[    0.357317] Loading compiled-in X.509 certificates
[    0.359869] Loaded X.509 cert 'Build time autogenerated kernel key: f1405f75fd94c9f4ce0f81c9d9af43094e90009f'
[    0.361624] zswap: loaded using pool zstd/zsmalloc
[    0.363058] Key type .fscrypt registered
[    0.363059] Key type fscrypt-provisioning registered
[    0.363738] PM:   Magic number: 12:267:595
[    0.366197] RAS: Correctable Errors collector initialized.
[    0.366257] clk: Disabling unused clocks
[    0.567575] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.580908] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.614244] ata5: SATA link down (SStatus 0 SControl 300)
[    0.614270] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.614296] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.614325] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.614351] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.614364] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.614978] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20230628/psargs-330)
[    0.614987] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
[    0.615038] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20230628/psargs-330)
[    0.615050] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
[    0.615099] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20230628/psargs-330)
[    0.615106] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
[    0.615112] ata2.00: ATA-11: SanDisk SDSSDH3 1T00, 401120RL, max UDMA/133
[    0.615159] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20230628/psargs-330)
[    0.615165] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
[    0.615173] ata6.00: ATA-7: MAXTOR STM3250310AS, 3.AAC, max UDMA/133
[    0.615177] ata6.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32)
[    0.615285] ata1.00: ATA-8: WDC WD10EZRX-00A8LB0, 01.01A01, max UDMA/133
[    0.615487] ata4.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max UDMA/133
[    0.615569] ata4.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.615673] ata2.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    0.615871] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20230628/psargs-330)
[    0.615879] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
[    0.615968] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.616001] ata6.00: configured for UDMA/133
[    0.616394] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20230628/psargs-330)
[    0.616411] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
[    0.616631] ata4.00: configured for UDMA/133
[    0.616838] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20230628/psargs-330)
[    0.616849] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
[    0.616993] ata1.00: configured for UDMA/133
[    0.617238] ata2.00: Features: Dev-Sleep
[    0.617240] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EZRX-00A 1A01 PQ: 0 ANSI: 5
[    0.617367] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20230628/psargs-330)
[    0.617374] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
[    0.617379] ata3.00: ATAPI: HL-DT-ST DVDRAM GH40F, MG01, max UDMA/100
[    0.617538] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    0.617541] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.617555] sd 0:0:0:0: [sda] Write Protect is off
[    0.617557] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.617583] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.617604] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[    0.618061] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20230628/psargs-330)
[    0.618067] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
[    0.620447] ata2.00: configured for UDMA/133
[    0.620503] scsi 1:0:0:0: Direct-Access     ATA      SanDisk SDSSDH3  20RL PQ: 0 ANSI: 5
[    0.620754] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    0.620761] sd 1:0:0:0: [sdb] Write Protect is off
[    0.620763] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.620772] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.620785] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[    0.621277] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20230628/psargs-330)
[    0.621285] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
[    0.621292] ata3.00: configured for UDMA/100
[    0.622362]  sdb: sdb1 sdb2 sdb3
[    0.622585] sd 1:0:0:0: [sdb] Attached SCSI disk
[    0.628865] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH40F     MG01 PQ: 0 ANSI: 5
[    0.635094]  sda: sda1 sda2
[    0.635376] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.656395] scsi 3:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-2 3B01 PQ: 0 ANSI: 5
[    0.657119] sd 3:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    0.657130] sd 3:0:0:0: [sdc] Write Protect is off
[    0.657133] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    0.657159] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.657192] sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[    0.657217] scsi 5:0:0:0: Direct-Access     ATA      MAXTOR STM325031 C    PQ: 0 ANSI: 5
[    0.657483] sd 5:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    0.657494] sd 5:0:0:0: [sdd] Write Protect is off
[    0.657496] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    0.657520] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.657541] sd 5:0:0:0: [sdd] Preferred minimum I/O size 512 bytes
[    0.667184]  sdd: sdd1
[    0.667270] sd 5:0:0:0: [sdd] Attached SCSI disk
[    0.674490]  sdc: sdc1
[    0.674566] sd 3:0:0:0: [sdc] Attached SCSI disk
[    0.676615] Freeing unused decrypted memory: 2028K
[    0.677028] Freeing unused kernel image (initmem) memory: 3424K
[    0.677059] Write protecting the kernel read-only data: 30720k
[    0.677376] Freeing unused kernel image (rodata/data gap) memory: 1188K
[    0.714618] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    0.714623] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.715070] hub 1-1:1.0: USB hub found
[    0.715241] hub 1-1:1.0: 8 ports detected
[    0.727865] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    0.727869] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.728209] hub 2-1:1.0: USB hub found
[    0.728363] hub 2-1:1.0: 6 ports detected
[    0.728539] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.728543] rodata_test: all tests were successful
[    0.728545] x86/mm: Checking user space page tables
[    0.764308] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.764317] Run /init as init process
[    0.764318]   with arguments:
[    0.764319]     /init
[    0.764320]   with environment:
[    0.764320]     HOME=/
[    0.764321]     TERM=linux
[    0.764322]     BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64
[    0.906343] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.906353] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.907415] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[    0.907608] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.907613] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.907616] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.907668] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    0.907671] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.907674] usb usb3: Product: xHCI Host Controller
[    0.907676] usb usb3: Manufacturer: Linux 6.6.10-1-MANJARO xhci-hcd
[    0.907677] usb usb3: SerialNumber: 0000:00:14.0
[    0.907814] hub 3-0:1.0: USB hub found
[    0.907826] hub 3-0:1.0: 4 ports detected
[    0.908510] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[    0.908513] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.908516] usb usb4: Product: xHCI Host Controller
[    0.908517] usb usb4: Manufacturer: Linux 6.6.10-1-MANJARO xhci-hcd
[    0.908519] usb usb4: SerialNumber: 0000:00:14.0
[    0.908621] hub 4-0:1.0: USB hub found
[    0.908631] hub 4-0:1.0: 4 ports detected
[    0.972141] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.972151] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.994229] usb 1-1.8: new full-speed USB device number 3 using ehci-pci
[    1.010914] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[    1.026202] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.128402] usb 1-1.8: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[    1.128411] usb 1-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.163605] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[    1.226925] tsc: Refined TSC clocksource calibration: 3410.013 MHz
[    1.226942] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3127418e06e, max_idle_ns: 440795285561 ns
[    1.226988] clocksource: Switched to clocksource tsc
[    1.267910] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0169, bcdDevice=61.23
[    1.267918] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.267921] usb 2-1.1: Product: USB2.0-CRW
[    1.267923] usb 2-1.1: Manufacturer: Generic
[    1.267925] usb 2-1.1: SerialNumber: 20070818000000000
[    1.276252] usb-storage 2-1.1:1.1: USB Mass Storage device detected
[    1.276649] scsi host6: usb-storage 2-1.1:1.1
[    1.276835] usbcore: registered new interface driver usb-storage
[    1.282728] usbcore: registered new interface driver uas
[    1.308276] usb 3-3: New USB device found, idVendor=fffe, idProduct=000c, bcdDevice= 1.04
[    1.308284] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.308287] usb 3-3: Product: Akko Keyboard
[    1.308289] usb 3-3: Manufacturer: Akko
[    1.321304] input: Akko Akko Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:FFFE:000C.0001/input/input2
[    1.346940] usb 2-1.2: new full-speed USB device number 4 using ehci-pci
[    1.377412] hid-generic 0003:FFFE:000C.0001: input,hidraw0: USB HID v1.11 Keyboard [Akko Akko Keyboard] on usb-0000:00:14.0-3/input0
[    1.378152] hid-generic 0003:FFFE:000C.0002: hiddev96,hidraw1: USB HID v1.11 Device [Akko Akko Keyboard] on usb-0000:00:14.0-3/input1
[    1.378207] usbcore: registered new interface driver usbhid
[    1.378208] usbhid: USB HID core driver
[    1.430268] usb 3-4: new full-speed USB device number 3 using xhci_hcd
[    1.446660] usb 2-1.2: New USB device found, idVendor=1507, idProduct=2814, bcdDevice= 2.00
[    1.446668] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.446671] usb 2-1.2: Product: 2.4G Composite Devic
[    1.449029] input: 2.4G Composite Devic as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:1507:2814.0003/input/input3
[    1.503832] hid-generic 0003:1507:2814.0003: input,hidraw2: USB HID v1.10 Keyboard [2.4G Composite Devic] on usb-0000:00:1a.0-1.2/input0
[    1.506751] input: 2.4G Composite Devic Mouse as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:1507:2814.0004/input/input4
[    1.506864] input: 2.4G Composite Devic Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:1507:2814.0004/input/input5
[    1.560376] input: 2.4G Composite Devic System Control as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:1507:2814.0004/input/input6
[    1.560458] hid-generic 0003:1507:2814.0004: input,hidraw3: USB HID v1.10 Mouse [2.4G Composite Devic] on usb-0000:00:1a.0-1.2/input1
[    1.571670] usb 3-4: New USB device found, idVendor=046d, idProduct=c09d, bcdDevice=52.02
[    1.571678] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.571681] usb 3-4: Product: G203 LIGHTSYNC Gaming Mouse
[    1.571683] usb 3-4: Manufacturer: Logitech
[    1.571685] usb 3-4: SerialNumber: 206436694858
[    1.573198] input: Logitech G203 LIGHTSYNC Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:046D:C09D.0005/input/input7
[    1.573305] hid-generic 0003:046D:C09D.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech G203 LIGHTSYNC Gaming Mouse] on usb-0000:00:14.0-4/input0
[    1.574674] input: Logitech G203 LIGHTSYNC Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:046D:C09D.0006/input/input8
[    1.630458] hid-generic 0003:046D:C09D.0006: input,hiddev97,hidraw5: USB HID v1.11 Keyboard [Logitech G203 LIGHTSYNC Gaming Mouse] on usb-0000:00:14.0-4/input1
[    2.065416] fbcon: Taking over console
[    2.068380] Console: switching to colour frame buffer device 128x48
[    2.274614] EXT4-fs (sdb2): mounted filesystem dbd78c17-f7c0-476f-b72a-459ec5566942 r/w with ordered data mode. Quota mode: none.
[    2.310076] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    2.311644] sd 6:0:0:0: [sde] Media removed, stopped polling
[    2.311973] sd 6:0:0:0: [sde] Attached SCSI removable disk
[    2.402638] systemd[1]: systemd 255.2-2-manjaro running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    2.402645] systemd[1]: Detected architecture x86-64.
[    2.404659] systemd[1]: Hostname set to <iscandar>.
[    2.810385] systemd[1]: bpf-lsm: LSM BPF program attached
[    3.116613] systemd[1]: Queued start job for default target Graphical Interface.
[    3.162142] systemd[1]: Created slice Slice /system/avahi-alias.
[    3.162533] systemd[1]: Created slice Slice /system/avahi-alias-ip6.
[    3.162876] systemd[1]: Created slice Slice /system/getty.
[    3.163224] systemd[1]: Created slice Slice /system/modprobe.
[    3.163574] systemd[1]: Created slice Slice /system/systemd-fsck.
[    3.163853] systemd[1]: Created slice User and Session Slice.
[    3.163913] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.163958] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.164112] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.164132] systemd[1]: Expecting device /dev/disk/by-uuid/2be7c2ef-43e1-4601-95f3-aee00991978a...
[    3.164141] systemd[1]: Expecting device /dev/disk/by-uuid/3A3E-5F87...
[    3.164151] systemd[1]: Reached target Local Encrypted Volumes.
[    3.164163] systemd[1]: Reached target Login Prompts.
[    3.164177] systemd[1]: Reached target Local Integrity Protected Volumes.
[    3.164199] systemd[1]: Reached target Remote File Systems.
[    3.164209] systemd[1]: Reached target Slice Units.
[    3.164221] systemd[1]: Reached target Mounting snaps.
[    3.164232] systemd[1]: Reached target Mounted snaps.
[    3.164254] systemd[1]: Reached target Local Verity Protected Volumes.
[    3.164319] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.164429] systemd[1]: Listening on LVM2 poll daemon socket.
[    3.165521] systemd[1]: Listening on Process Core Dump Socket.
[    3.165631] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.165733] systemd[1]: Listening on Journal Socket.
[    3.165763] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    3.166603] systemd[1]: Listening on udev Control Socket.
[    3.166708] systemd[1]: Listening on udev Kernel Socket.
[    3.167748] systemd[1]: Mounting Huge Pages File System...
[    3.168416] systemd[1]: Mounting POSIX Message Queue File System...
[    3.169096] systemd[1]: Mounting Kernel Debug File System...
[    3.169761] systemd[1]: Mounting Kernel Trace File System...
[    3.169845] systemd[1]: Load AppArmor profiles was skipped because of an unmet condition check (ConditionSecurity=apparmor).
[    3.171121] systemd[1]: Starting Create List of Static Device Nodes...
[    3.172179] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    3.173127] systemd[1]: Starting Load Kernel Module configfs...
[    3.174784] systemd[1]: Starting Load Kernel Module dm_mod...
[    3.175672] systemd[1]: Starting Load Kernel Module drm...
[    3.176723] systemd[1]: Starting Load Kernel Module fuse...
[    3.177746] systemd[1]: Starting Load Kernel Module loop...
[    3.177787] systemd[1]: Load AppArmor profiles managed internally by snapd was skipped because of an unmet condition check (ConditionSecurity=apparmor).
[    3.177865] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[    3.179482] systemd[1]: Starting Load Kernel Modules...
[    3.179509] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    3.180625] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.180685] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    3.181757] systemd[1]: Starting Coldplug All udev Devices...
[    3.183407] systemd[1]: Mounted Huge Pages File System.
[    3.183511] systemd[1]: Mounted POSIX Message Queue File System.
[    3.183614] systemd[1]: Mounted Kernel Debug File System.
[    3.183723] systemd[1]: Mounted Kernel Trace File System.
[    3.195223] loop: module loaded
[    3.195240] device-mapper: uevent: version 1.0.3
[    3.195317] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    3.197813] fuse: init (API version 7.39)
[    3.202909] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.202935] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    3.202958] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    3.202977] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    3.202996] sd 5:0:0:0: Attached scsi generic sg4 type 0
[    3.203014] sd 6:0:0:0: Attached scsi generic sg5 type 0
[    3.207263] systemd[1]: Finished Create List of Static Device Nodes.
[    3.207336] EXT4-fs (sdb2): re-mounted dbd78c17-f7c0-476f-b72a-459ec5566942 r/w. Quota mode: none.
[    3.208170] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    3.208372] vboxdrv: loading out-of-tree module taints kernel.
[    3.208376] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    3.222540] vboxdrv: Found 8 processor cores/threads
[    3.243863] vboxdrv: TSC mode is Invariant, tentative frequency 3410011331 Hz
[    3.243865] vboxdrv: Successfully loaded version 7.0.12 r159484 (interface 0x00330004)
[    3.245221] VBoxNetAdp: Successfully started.
[    3.246998] VBoxNetFlt: Successfully started.
[    3.250524] systemd[1]: Finished Load Kernel Module configfs.
[    3.250945] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    3.283786] systemd[1]: Finished Load Kernel Module dm_mod.
[    3.284093] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    3.333773] systemd[1]: Finished Load Kernel Module drm.
[    3.334109] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    3.360492] systemd[1]: Finished Load Kernel Module fuse.
[    3.360802] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    3.390493] systemd[1]: Finished Load Kernel Module loop.
[    3.427181] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[    3.457163] systemd[1]: Finished Remount Root and Kernel File Systems.
[    3.480507] systemd[1]: Finished Coldplug All udev Devices.
[    3.513793] systemd[1]: Mounting FUSE Control File System...
[    3.514676] systemd[1]: Mounting Kernel Configuration File System...
[    3.515047] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[    3.515845] systemd[1]: Starting Load/Save OS Random Seed...
[    3.515889] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[    3.516585] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[    3.516605] systemd[1]: TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    3.517364] systemd[1]: Mounted FUSE Control File System.
[    3.519635] systemd[1]: Mounted Kernel Configuration File System.
[    3.553808] systemd[1]: Finished Load/Save OS Random Seed.
[    3.610448] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
[    3.610634] systemd[1]: Create System Users was skipped because no trigger condition checks were met.
[    3.640467] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.680410] systemd[1]: Finished Create Static Device Nodes in /dev.
[    3.680518] systemd[1]: Reached target Preparation for Local File Systems.
[    3.680795] systemd[1]: Set up automount mnt-alpha.automount.
[    3.681034] systemd[1]: Set up automount mnt-beta.automount.
[    3.681268] systemd[1]: Set up automount mnt-gamma.automount.
[    3.681295] systemd[1]: Virtual Machine and Container Storage (Compatibility) was skipped because of an unmet condition check (ConditionPathExists=/var/lib/machines.raw).
[    3.681329] systemd[1]: Entropy Daemon based on the HAVEGE algorithm was skipped because of an unmet condition check (ConditionKernelVersion=<5.6).
[    3.713797] systemd[1]: Starting Journal Service...
[    3.715152] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    3.724472] systemd-journald[257]: Collecting audit messages is disabled.
[    3.766309] systemd[1]: Started Journal Service.
[    3.794664] systemd-journald[257]: Received client request to flush runtime journal.
[    3.795614] systemd-journald[257]: File /var/log/journal/4e4219c4df824631a9cef4853d3f65b5/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    4.042712] EDAC ie31200: No ECC support
[    4.043643] EDAC ie31200: No ECC support
[    4.091184] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20230628/utaddress-204)
[    4.091197] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    4.091201] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20230628/utaddress-204)
[    4.091205] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    4.091208] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20230628/utaddress-204)
[    4.091212] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    4.091214] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20230628/utaddress-204)
[    4.091218] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    4.091219] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.091880] Adding 17983908k swap on /dev/sdb3.  Priority:-2 extents:1 across:17983908k SS
[    4.122967] input: PC Speaker as /devices/platform/pcspkr/input/input11
[    4.172912] raid6: skipped pq benchmark and selected sse2x4
[    4.172917] raid6: using ssse3x2 recovery algorithm
[    4.182057] mousedev: PS/2 mouse device common for all mice
[    4.184537] xor: automatically using best checksumming function   avx
[    4.185676] i8042: PNP: No PS/2 controller found.
[    4.204422] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    4.206657] i2c i2c-0: 2/4 memory slots populated (from DMI)
[    4.210456] i2c i2c-0: Successfully instantiated SPD at 0x50
[    4.211016] i2c i2c-0: Successfully instantiated SPD at 0x52
[    4.224446] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    4.227025] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[    4.227028] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    4.227030] RAPL PMU: hw unit of domain package 2^-16 Joules
[    4.227036] asus_wmi: ASUS WMI generic driver loaded
[    4.238413] cryptd: max_cpu_qlen set to 1000
[    4.241632] asus_wmi: Initialization: 0x0
[    4.241671] asus_wmi: BIOS WMI version: 0.9
[    4.241741] asus_wmi: SFUN value: 0x0
[    4.241744] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[    4.244450] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input12
[    4.278473] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, ########, XID 2c9, IRQ 29
[    4.278480] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    4.352381] AVX version of gcm_enc/dec engaged.
[    4.352410] AES CTR mode by8 optimization enabled
[    4.388845] Btrfs loaded, zoned=yes, fsverity=yes
[    4.400485] Bluetooth: Core ver 2.22
[    4.400505] NET: Registered PF_BLUETOOTH protocol family
[    4.400507] Bluetooth: HCI device and connection manager initialized
[    4.400511] Bluetooth: HCI socket layer initialized
[    4.400513] Bluetooth: L2CAP socket layer initialized
[    4.400517] Bluetooth: SCO socket layer initialized
[    4.401060] BTRFS: device label beta devid 1 transid 38 /dev/sdd1 scanned by (udev-worker) (290)
[    4.401465] iTCO_vendor_support: vendor-support=0
[    4.401467] BTRFS: device label gamma devid 1 transid 10077 /dev/sdc1 scanned by (udev-worker) (291)
[    4.435204] iTCO_wdt iTCO_wdt.1.auto: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[    4.435315] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[    4.449920] at24 0-0050: supply vcc not found, using dummy regulator
[    4.451055] at24 0-0050: 256 byte spd EEPROM, read-only
[    4.451298] at24 0-0052: supply vcc not found, using dummy regulator
[    4.451890] at24 0-0052: 256 byte spd EEPROM, read-only
[    4.451952] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    4.453205] usbcore: registered new interface driver btusb
[    4.454465] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=6 rev=22bb
[    4.454468] Bluetooth: hci0: LMP ver=6 subver=22bb; manufacturer=10
[    4.458989] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    4.459296] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    4.459341] snd_hda_intel 0000:01:00.1: Disabling MSI
[    4.459346] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    4.492339] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    4.492345] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.492347] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.492348] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.492349] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[    4.492350] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.492351] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    4.492352] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    4.492353] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    4.499509] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[    4.499567] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    4.499615] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    4.499667] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[    4.521708] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    4.521785] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    4.521851] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[    4.527522] nvidia: module license 'NVIDIA' taints kernel.
[    4.527529] Disabling lock debugging due to kernel taint
[    4.527533] nvidia: module license taints kernel.
[    4.863860] nvidia-nvlink: Nvlink Core is being initialized, major device number 236

[    4.864606] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
[    4.891963] intel_rapl_common: Found RAPL domain package
[    4.891966] intel_rapl_common: Found RAPL domain core
[    4.891971] intel_rapl_common: package-0:package:long_term locked by BIOS
[    4.891973] intel_rapl_common: package-0:package:short_term locked by BIOS
[    6.379125] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  470.223.02  Sat Oct  7 15:39:11 UTC 2023
[    6.450724] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  470.223.02  Sat Oct  7 15:32:36 UTC 2023
[    6.502613] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    6.502617] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[    7.024977] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
[    7.137342] nvidia-uvm: Loaded the UVM driver, major device number 234.
[    7.143066] i2c_dev: i2c /dev entries driver
[    7.663534] nct6775: Found NCT6779D or compatible chip at 0x2e:0x290
[    7.690833] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.690836] Bluetooth: BNEP filters: protocol multicast
[    7.690840] Bluetooth: BNEP socket layer initialized
[    7.691806] Bluetooth: MGMT ver 1.22
[    7.697506] NET: Registered PF_ALG protocol family
[    7.760529] loop0: detected capacity change from 0 to 8
[    7.766646] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    8.027083] RTL8211E Gigabit Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[    8.043613] NET: Registered PF_QIPCRTR protocol family
[    8.262382] r8169 0000:03:00.0 enp3s0: Link is Down
[    8.761211] resource: resource sanity check: requesting [mem 0x00000000000c0000-0x00000000000fffff], which spans more than PCI Bus 0000:00 [mem 0x000dc000-0x000dffff window]
[    8.761217] caller _nv000720rm+0x1ad/0x200 [nvidia] mapping multiple BARs
[   11.205619] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
[   11.251977] Xorg[731]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[   13.840426] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   13.844381] Bridge firewalling registered
[   15.061387] br0: renamed from ov-001000-rswte
[   15.143896] vxlan0: renamed from vx-001000-rswte
[   15.160424] br0: port 1(vxlan0) entered blocking state
[   15.160441] br0: port 1(vxlan0) entered disabled state
[   15.160450] vxlan0: entered allmulticast mode
[   15.160504] vxlan0: entered promiscuous mode
[   15.160707] br0: port 1(vxlan0) entered blocking state
[   15.160711] br0: port 1(vxlan0) entered forwarding state
[   15.213895] veth0: renamed from vethffc3b18
[   15.243794] br0: port 2(veth0) entered blocking state
[   15.243807] br0: port 2(veth0) entered disabled state
[   15.243814] veth0: entered allmulticast mode
[   15.243878] veth0: entered promiscuous mode
[   15.244022] br0: port 2(veth0) entered blocking state
[   15.244025] br0: port 2(veth0) entered forwarding state
[   15.307203] eth0: renamed from vethb063de8
[   15.332875] docker_gwbridge: port 1(veth1b55504) entered blocking state
[   15.332880] docker_gwbridge: port 1(veth1b55504) entered disabled state
[   15.332887] veth1b55504: entered allmulticast mode
[   15.333016] veth1b55504: entered promiscuous mode
[   15.333128] docker_gwbridge: port 1(veth1b55504) entered blocking state
[   15.333131] docker_gwbridge: port 1(veth1b55504) entered forwarding state
[   15.333410] docker_gwbridge: port 1(veth1b55504) entered disabled state
[   15.380666] eth1: renamed from veth42b3687
[   15.407257] docker_gwbridge: port 1(veth1b55504) entered blocking state
[   15.407262] docker_gwbridge: port 1(veth1b55504) entered forwarding state
[   15.429183] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[   15.429206] IPVS: Connection hash table configured (size=32768, memory=256Kbytes)
[   15.429322] IPVS: ipvs loaded.
[   15.468873] IPVS: [rr] scheduler registered.
[   15.470580] IPVS: starting estimator thread 0...
[   15.543612] IPVS: using max 18672 ests per chain, 933600 per kthread
[   15.567127] br0: renamed from ov-001002-ubfiv
[   15.647288] vxlan0: renamed from vx-001002-ubfiv
[   15.683754] br0: port 1(vxlan0) entered blocking state
[   15.683766] br0: port 1(vxlan0) entered disabled state
[   15.683771] vxlan0: entered allmulticast mode
[   15.683803] vxlan0: entered promiscuous mode
[   15.683912] br0: port 1(vxlan0) entered blocking state
[   15.683914] br0: port 1(vxlan0) entered forwarding state
[   15.720678] veth0: renamed from veth818c531
[   15.747296] br0: port 2(veth0) entered blocking state
[   15.747309] br0: port 2(veth0) entered disabled state
[   15.747317] veth0: entered allmulticast mode
[   15.747387] veth0: entered promiscuous mode
[   15.747519] br0: port 2(veth0) entered blocking state
[   15.747522] br0: port 2(veth0) entered forwarding state
[   15.797235] eth0: renamed from veth5180cd9
[   15.833203] IPVS: starting estimator thread 0...
[   15.871157] FS-Cache: Loaded
[   15.903585] IPVS: using max 12624 ests per chain, 631200 per kthread
[   15.928972] RPC: Registered named UNIX socket transport module.
[   15.928976] RPC: Registered udp transport module.
[   15.928976] RPC: Registered tcp transport module.
[   15.928977] RPC: Registered tcp-with-tls transport module.
[   15.928977] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   15.989798] Key type dns_resolver registered
[   16.180128] NFS: Registering the id_resolver key type
[   16.180140] Key type id_resolver registered
[   16.180141] Key type id_legacy registered
[   16.287663] br0: port 2(veth0) entered disabled state
[   16.287675] br0: port 1(vxlan0) entered disabled state
[   16.287733] ov-001002-ubfiv: renamed from br0
[   16.303714] veth0: left allmulticast mode
[   16.303718] veth0: left promiscuous mode
[   16.303735] ov-001002-ubfiv: port 2(veth0) entered disabled state
[   16.326984] vxlan0: left allmulticast mode
[   16.326988] vxlan0: left promiscuous mode
[   16.327009] ov-001002-ubfiv: port 1(vxlan0) entered disabled state
[   16.423781] vx-001002-ubfiv: renamed from vxlan0
[   16.467235] veth818c531: renamed from veth0
[   16.523900] veth5180cd9: renamed from eth0
[   16.753905] IPVS: stop unused estimator thread 0...
[   19.953046] br0: renamed from ov-001002-ubfiv
[   20.030586] vxlan0: renamed from vx-001002-ubfiv
[   20.060500] br0: port 1(vxlan0) entered blocking state
[   20.060513] br0: port 1(vxlan0) entered disabled state
[   20.060521] vxlan0: entered allmulticast mode
[   20.060568] vxlan0: entered promiscuous mode
[   20.060704] br0: port 1(vxlan0) entered blocking state
[   20.060706] br0: port 1(vxlan0) entered forwarding state
[   20.084088] veth0: renamed from vethe03b37f
[   20.127188] br0: port 2(veth0) entered blocking state
[   20.127212] br0: port 2(veth0) entered disabled state
[   20.127220] veth0: entered allmulticast mode
[   20.127272] veth0: entered promiscuous mode
[   20.127391] br0: port 2(veth0) entered blocking state
[   20.127394] br0: port 2(veth0) entered forwarding state
[   20.183923] eth0: renamed from veth3316c32
[   20.232008] IPVS: starting estimator thread 0...
[   20.270579] veth1: renamed from veth4b6ec50
[   20.297253] br0: port 3(veth1) entered blocking state
[   20.297259] br0: port 3(veth1) entered disabled state
[   20.297269] veth1: entered allmulticast mode
[   20.297316] veth1: entered promiscuous mode
[   20.297412] br0: port 3(veth1) entered blocking state
[   20.297415] br0: port 3(veth1) entered forwarding state
[   20.299243] docker_gwbridge: port 2(vethaa97b5a) entered blocking state
[   20.299248] docker_gwbridge: port 2(vethaa97b5a) entered disabled state
[   20.299254] vethaa97b5a: entered allmulticast mode
[   20.299302] vethaa97b5a: entered promiscuous mode
[   20.299391] docker_gwbridge: port 2(vethaa97b5a) entered blocking state
[   20.299394] docker_gwbridge: port 2(vethaa97b5a) entered forwarding state
[   20.306973] IPVS: using max 13872 ests per chain, 693600 per kthread
[   20.517253] eth0: renamed from veth0fa1e46
[   20.547426] docker_gwbridge: port 2(vethaa97b5a) entered disabled state
[   20.570581] eth1: renamed from veth76b1a4c
[   20.604024] docker_gwbridge: port 2(vethaa97b5a) entered blocking state
[   20.604030] docker_gwbridge: port 2(vethaa97b5a) entered forwarding state
[   36.160944] systemd-journald[257]: File /var/log/journal/4e4219c4df824631a9cef4853d3f65b5/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   36.452938] traps: dunst[1812] trap int3 ip:7f46d0e42485 sp:7ffddee95f60 error:0 in libglib-2.0.so.0.7800.3[7f46d0dfe000+9e000]
[   36.916824] BTRFS info (device sdc1): first mount of filesystem 7639fefe-48f6-45aa-b7b3-4f1e1209f6e7
[   36.916840] BTRFS info (device sdc1): using crc32c (crc32c-intel) checksum algorithm
[   36.916845] BTRFS info (device sdc1): using free space tree
[   37.059382] input: uinput-unifiedremote as /devices/virtual/input/input20
[   37.699506] Bluetooth: RFCOMM TTY layer initialized
[   37.699514] Bluetooth: RFCOMM socket layer initialized
[   37.699519] Bluetooth: RFCOMM ver 1.11
[   57.389157] usb 3-3: USB disconnect, device number 2
[   67.686268] usb 3-3: new full-speed USB device number 4 using xhci_hcd
[   67.834345] usb 3-3: New USB device found, idVendor=fffe, idProduct=000c, bcdDevice= 1.04
[   67.834355] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   67.834359] usb 3-3: Product: Akko Keyboard
[   67.834361] usb 3-3: Manufacturer: Akko
[   67.835918] input: Akko Akko Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:FFFE:000C.0007/input/input21
[   67.889991] hid-generic 0003:FFFE:000C.0007: input,hidraw0: USB HID v1.11 Keyboard [Akko Akko Keyboard] on usb-0000:00:14.0-3/input0
[   67.890526] hid-generic 0003:FFFE:000C.0008: hiddev96,hidraw1: USB HID v1.11 Device [Akko Akko Keyboard] on usb-0000:00:14.0-3/input1

Welcome to Manjaro! :smiling_face_with_three_hearts:

  1. Please read the information behind this link. It will help you to post necessary information.
  1. Please press the three dots below your post and then press the :pencil2:
  • If you give us information about your system, we can see what we’re talking about and make better suggestions.
  • You can do this by using inxi in a terminal or in console.
sudo inxi --admin --verbosity=7 --filter --no-host --width
  • Personally identifiable information such as serial numbers and MAC addresses are filtered out by this command
  • Presenting the information in this way allows everyone to be familiar with the format and quickly find the items they need without missing anything.
  1. Copy the output from inxi (including the command) and paste it into your post.
  • To make it more readable, add 3 backticks ``` on an extra line before and after the pasted text.

Have you already :mag: for your problem in the forum ? (Wisdom lies in asking → listening → reading :wink: )

1 Like

Thank you! I provided dmesg and inxi