I am trying to use manjaro kde edition from my usb pendrive.i selected non free drivers before booting but it is not showing any wifi connections only wired connection option is available.plz help
See this first
I do. I see no problem with that.
While screenshots might be relevant to you, here is a description on what information you should provide (mentioned it already in the other topic you commented):
Not all wifi models work by default and in many cases the laptop model is also important as it might require custom kernel boot parameters. See some related
broadcom-wl driver here:
Thank you for reply but my laptop is dell & when i use ubuntu or mx linux or knoppix there is already a wifi icon below & i just have to click it & select my router name & enter password & the internet works fine but in this os no Matter what i am doing it just dont show the wifi icon on taskbar
Is the problem occuring because i am using it on a live usb pen drive without installing?
Well, no worries. I know this inconvenient can be frustrating, but lets focus on the technical part. Make sure you provide this:
Then i can look if that model of wifi is or not one that requires manual intervention, then i could answer this
without speculating or going on the wrong track.
Regardless the issue, i'm sure is possible to fix it
Thank you brother you know i was frustated
Wait i will give the information you asked.sorry if i insulted you unknowingly
Please read about how to use Android USB phone tethering to get a working internet connection to upload outputs. It is impossible to offer advice until you have provided your hardware specs.
Once you have provided the required information someone may be able to help you.
That is not helpful, you must upload outputs as text not pictures.
Disable MAC Address Randomization.
Enter this command in the terminal to automatically generate the required file:
echo -e "[device]\nwifi.scan-rand-mac-address=no" | sudo tee /etc/NetworkManager/conf.d/disable-random-mac.conf
After creating the new conf file, reboot both your router and your computer.
Install both of the newest kernels and test your wifi on different kernels. The newer kernels have been working better for some Broadcom adapters.
Enter these commands in the terminal to install the newest kernels:
sudo mhwd-kernel -i linux52
sudo mhwd-kernel -i linux53
[manjaro@manjaro ~]$ inxi-Fxxxz--no-host
bash: inxi-Fxxxz--no-host: command not found
[manjaro@manjaro ~]$ inxi-Fxxxz --no-host
bash: inxi-Fxxxz: command not found
[manjaro@manjaro ~]$ inxi -Fxxxz --no-host
System: Kernel: 4.19.28-1-MANJARO x86_64 bits: 64 compiler: gcc v: 8.2.1 Desktop: KDE Plasma 5.15.2 tk: Qt 5.12.1
wm: kwin_x11 dm: SDDM Distro: Manjaro Linux
Machine: Type: Portable System: Dell product: Inspiron 3543 v: A08 serial: Chassis: type: 8 serial:
Mobo: Dell model: 0RN98T v: A00 serial: UEFI: Dell v: A08 date: 05/13/2016
Battery: ID-1: BAT0 charge: 10.6 Wh condition: 31.4/41.4 Wh (76%) volts: 14.9/14.8 model: SMP-SAN2.8 DELL FW1MN41
type: Unknown serial: status: Discharging
CPU: Topology: Dual Core model: Intel Core i3-5005U bits: 64 type: MT MCP arch: Broadwell rev: 4 L2 cache: 3072 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 15971
Speed: 798 MHz min/max: 500/1900 MHz Core speeds (MHz): 1: 800 2: 798 3: 798 4: 798
Graphics: Device-1: Intel HD Graphics 5500 vendor: Dell driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:1616
Display: x11 server: X.Org 1.20.4 driver: intel unloaded: modesetting alternate: fbdev,vesa compositor: kwin_x11
OpenGL: renderer: Mesa DRI Intel HD Graphics 5500 (Broadwell GT2) v: 4.5 Mesa 18.3.4 compat-v: 3.0
direct render: Yes
Audio: Device-1: Intel Broadwell-U Audio vendor: Dell driver: snd_hda_intel v: kernel bus ID: 00:03.0 chip ID: 8086:160c
Device-2: Intel Wildcat Point-LP High Definition Audio vendor: Dell driver: snd_hda_intel v: kernel bus ID: 00:1b.0
chip ID: 8086:9ca0
Sound Server: ALSA v: k4.19.28-1-MANJARO
Network: Device-1: Broadcom and subsidiaries BCM43142 802.11b/g/n vendor: Dell Wireless 1704 802.11n + BT 4.0
driver: bcma-pci-bridge v: N/A port: 4040 bus ID: 06:00.0 chip ID: 14e4:4365
Device-2: Realtek RTL810xE PCI Express Fast Ethernet vendor: Dell driver: r8169 v: kernel port: 3000
bus ID: 07:00.0 chip ID: 10ec:8136
IF: enp7s0 state: down mac:
Drives: Local Storage: total: 938.83 GiB used: 83.7 MiB (0.0%)
ID-1: /dev/sda vendor: Western Digital model: WD10JPVX-75JC3T0 size: 931.51 GiB speed: 6.0 Gb/s rotation: 5400 rpm
serial: rev: 1A01 scheme: MBR
ID-2: /dev/sdb type: USB vendor: Lexar model: USB Flash Drive size: 7.32 GiB serial: rev: 8.07 scheme: MBR
Partition: ID-1: / size: 2.82 GiB used: 83.7 MiB (2.9%) fs: overlay source: ERR-102
Sensors: System Temperatures: cpu: 39.0 C mobo: 44.0 C
Fan Speeds (RPM): cpu: 0
Info: Processes: 176 Uptime: 2m Memory: 3.77 GiB used: 539.0 MiB (14.0%) Init: systemd v: 241 Compilers: gcc: 8.2.1
Shell: bash v: 5.0.0 running in: konsole inxi: 3.0.32
rfkill list all
Please follow my above advice to hopefully get your adapter working. You have a very problematic broadcom adapter that many have problems getting working with Manjaro. If my above advice does not fix things for you there is little that can be done for you.
ok brother i will follow your advise but for your information i am using this linux on a bootable usb pendrive as a live image as of now
[manjaro@manjaro ~]$ rfkill list all
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
Without installing there is little that can be done for you. The fix requires the newest kernels which cannot be installed in a live environment. Any change that requires a reboot such as kernel installs are wiped at a reboot. Changes are non-persistent in the live environment.
My recommendations will be of little use until you install.
ok thank you for the help brother.appreciate your valuble help & of others also who tried to help me
You are welcome, good luck.
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.