Wifi connection deactivating

It happens everytime, the connection crashes a couple of time and then it crashes until i reboot the pc. i tried to reinstall free drivers (i can't install non-free ones, the pc goes black screen on boot and i can only open terminal from tty1). My internet adapter is realtek

System:    Host: paga-pc Kernel: 4.19.60-1-MANJARO x86_64 bits: 64 compiler: gcc v: 9.1.0 Desktop: KDE Plasma 5.16.3 
           tk: Qt 5.13.0 wm: kwin_x11 dm: SDDM Distro: Manjaro Linux 
Machine:   Type: Laptop System: Hewlett-Packard product: HP Pavilion dv6 Notebook PC v: 0691210000204610000620100 
           serial: <filter> Chassis: type: 10 serial: <filter> 
           Mobo: Hewlett-Packard model: 17FD v: 10.5A serial: <filter> BIOS: Hewlett-Packard v: F.1C date: 01/23/2013 
Battery:   ID-1: BAT0 charge: 0.5 Wh condition: 16.1/62.2 Wh (26%) volts: 12.2/11.1 model: Hewlett-Packard 5600 type: Li-ion 
           serial: <filter> status: Charging 
CPU:       Topology: Dual Core model: Intel Core i5-2450M bits: 64 type: MT MCP arch: Sandy Bridge rev: 7 L2 cache: 3072 KiB 
           flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 19962 
           Speed: 798 MHz min/max: 800/3100 MHz Core speeds (MHz): 1: 798 2: 800 3: 798 4: 799 
Graphics:  Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics vendor: Hewlett-Packard driver: i915 
           v: kernel bus ID: 00:02.0 chip ID: 8086:0126 
           Device-2: Advanced Micro Devices [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] vendor: Hewlett-Packard 
           driver: radeon v: kernel bus ID: 01:00.0 chip ID: 1002:6760 
           Display: x11 server: X.Org 1.20.5 driver: intel,radeon FAILED: ati unloaded: modesetting alternate: fbdev,vesa 
           compositor: kwin_x11 resolution: 1366x768~60Hz 
           OpenGL: renderer: Mesa DRI Intel Sandybridge Mobile v: 3.3 Mesa 19.1.3 compat-v: 3.0 direct render: Yes 
Audio:     Device-1: Intel 6 Series/C200 Series Family High Definition Audio vendor: Hewlett-Packard driver: snd_hda_intel 
           v: kernel bus ID: 00:1b.0 chip ID: 8086:1c20 
           Sound Server: ALSA v: k4.19.60-1-MANJARO 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Hewlett-Packard driver: r8168 
           v: 8.047.02-NAPI port: 4000 bus ID: 07:00.0 chip ID: 10ec:8168 
           IF: eno1 state: down mac: <filter> 
           Device-2: Realtek RTL8188CE 802.11b/g/n WiFi Adapter vendor: Hewlett-Packard driver: rtl8192ce v: kernel port: 3000 
           bus ID: 0d:00.0 chip ID: 10ec:8176 
           IF: wlo1 state: up mac: <filter> 
Drives:    Local Storage: total: 465.76 GiB used: 51.48 GiB (11.1%) 
           ID-1: /dev/sda vendor: Seagate model: ST9500325AS size: 465.76 GiB speed: 3.0 Gb/s rotation: 5400 rpm 
           serial: <filter> rev: HPM1 scheme: MBR 
Partition: ID-1: / size: 457.45 GiB used: 51.48 GiB (11.3%) fs: ext4 dev: /dev/sda1 
Sensors:   System Temperatures: cpu: 53.0 C mobo: N/A gpu: radeon temp: 53 C 
           Fan Speeds (RPM): N/A 
Info:      Processes: 183 Uptime: 4m Memory: 7.74 GiB used: 1001.5 MiB (12.6%) Init: systemd v: 242 Compilers: gcc: 9.1.0 
           Shell: bash v: 5.0.7 running in: konsole inxi: 3.0.35 

sudo dmesg | grep eth
[ 13.678469] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 15.206791] vga_switcheroo: detected switching method _SB_.PCI0.GFX0.ATPX handle
[ 15.408511] r8168 0000:07:00.0 eno1: renamed from eth0


sudo dmesg | grep wlo1
[sudo] password for paga:
[ 16.145676] rtl8192ce 0000:0d:00.0 wlo1: renamed from wlan0
[ 22.689146] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 23.106977] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 23.919360] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 31.231202] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 91.557193] wlo1: authenticate with a4:91:b1:e0:9d:ff
[ 91.959484] wlo1: send auth to a4:91:b1:e0:9d:ff (try 1/3)
[ 91.962458] wlo1: authenticated
[ 91.965695] wlo1: associate with a4:91:b1:e0:9d:ff (try 1/3)
[ 91.969638] wlo1: RX AssocResp from a4:91:b1:e0:9d:ff (capab=0x1411 status=0 aid=2)
[ 91.970231] wlo1: associated
[ 92.382686] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 285.166378] wlo1: AP a4:91:b1:e0:9d:ff changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 313.839872] wlo1: AP a4:91:b1:e0:9d:ff changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 4505.533747] wlo1: deauthenticating from a4:91:b1:e0:9d:ff by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4511.726936] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 4512.118495] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 4512.170376] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 4513.226253] wlo1: authenticate with a4:91:b1:e0:9d:ff
[ 4513.236748] wlo1: send auth to a4:91:b1:e0:9d:ff (try 1/3)
[ 4513.239329] wlo1: authenticated
[ 4513.239917] wlo1: associate with a4:91:b1:e0:9d:ff (try 1/3)
[ 4513.244019] wlo1: RX AssocResp from a4:91:b1:e0:9d:ff (capab=0x1411 status=0 aid=2)
[ 4513.244535] wlo1: associated

... ?

Don't keep us in suspense.

Please see:

1 Like

Disable IPV6 and reboot ... Also try a different kernel.

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.

Forum kindly sponsored by