The issue is I can’t even see my 5ghz network even though other networks do show up just fine, I’m using a Alfa AWUS036ACS wifi adapter that works just fine on Windows
I’m on a mostly fresh install, as the only things I’ve installed were the rtl88xxau drivers from the AUR
inxi output:
System:
Kernel: 5.13.19-2-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.13-x86_64
root=UUID=3b8ddb35-dedc-4003-8bc2-8f193617c4a1 rw quiet apparmor=1
security=apparmor udev.log_priority=3
Desktop: KDE Plasma 5.22.5 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop System: Micro-Star product: MS-7A38 v: 5.0 serial: <filter>
Mobo: Micro-Star model: B450M BAZOOKA V2 (MS-7A38) v: 5.0 serial: <filter>
UEFI: American Megatrends v: P.40 date: 03/06/2019
Battery:
ID-1: hidpp_battery_0 charge: N/A condition: N/A volts: 4.1 min: N/A
model: Logitech G502 LIGHTSPEED Wireless Gaming Mouse type: N/A
serial: <filter> status: Discharging
Memory:
RAM: total: 23.43 GiB used: 3.72 GiB (15.9%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: 8-Core model: AMD Ryzen 7 2700 bits: 64 type: MT MCP arch: Zen+
family: 17 (23) model-id: 8 stepping: 2 microcode: 800820D cache: L2: 4 MiB
bogomips: 102427
Speed: 1377 MHz min/max: 1550/3200 MHz boost: enabled Core speeds (MHz):
1: 1377 2: 1302 3: 1558 4: 1438 5: 1405 6: 1377 7: 1375 8: 1550 9: 1441
10: 1340 11: 1412 12: 3464 13: 1458 14: 1336 15: 2154 16: 1619
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext clflush clflushopt clzero cmov cmp_legacy constant_tsc cpb cpuid
cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid
fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb irperf lahf_lm lbrv lm mca
mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl
npt nrip_save nx osvw overflow_recov pae pat pausefilter pclmulqdq pdpe1gb
perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni popcnt pse pse36
rdrand rdseed rdtscp rep_good sep sev sev_es sha_ni skinit smap smca sme
smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 succor svm svm_lock syscall tce
topoext tsc tsc_scale v_vmsave_vmload vgif vmcb_clean vme vmmcall wdt
xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, STIBP:
disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA TU106 [GeForce RTX 2060 SUPER] vendor: ASUSTeK
driver: nouveau v: kernel bus-ID: 1f:00.0 chip-ID: 10de:1f06 class-ID: 0300
Device-2: Microsoft LifeCam Cinema type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 1-10:8 chip-ID: 045e:075d class-ID: 0102
Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver:
loaded: modesetting alternate: fbdev,vesa display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1016x285mm (40.0x11.2")
s-diag: 1055mm (41.5")
Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 96 size: 509x286mm (20.0x11.3")
diag: 584mm (23")
Monitor-2: DVI-D-1 res: 1920x1080 hz: 60 dpi: 102
size: 477x268mm (18.8x10.6") diag: 547mm (21.5")
OpenGL: renderer: NV166 v: 4.3 Mesa 21.2.3 direct render: Yes
Audio:
Device-1: NVIDIA TU106 High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus-ID: 1f:00.1 chip-ID: 10de:10f9
class-ID: 0403
Device-2: AMD Family 17h HD Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel bus-ID: 21:00.3 chip-ID: 1022:1457
class-ID: 0403
Device-3: Microsoft LifeCam Cinema type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 1-10:8 chip-ID: 045e:075d class-ID: 0102
Sound Server-1: ALSA v: k5.13.19-2-MANJARO running: yes
Sound Server-2: JACK v: 1.9.19 running: no
Sound Server-3: PulseAudio v: 15.0 running: yes
Sound Server-4: PipeWire v: 0.3.38 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Micro-Star MSI driver: r8169 v: kernel port: f000 bus-ID: 1b:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: enp27s0 state: down mac: <filter>
Device-2: Realtek Realtek 8812AU/8821AU 802.11ac WLAN Adapter [USB Wireless
Dual-Band Adapter 2.4/5Ghz]
type: USB driver: rtl88XXau bus-ID: 5-1:4 chip-ID: 0bda:0811 class-ID: 0000
serial: <filter>
IF: wlp32s0f3u1 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB
driver: btusb v: 0.8 bus-ID: 1-8.4:10 chip-ID: 0a12:0001 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 2.69 TiB used: 22.89 GiB (0.8%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Kingston model: SA400S37240G
size: 223.57 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
type: SSD serial: <filter> rev: B1D1 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital model: WD20EZRX-00D8PB0
size: 1.82 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
type: HDD rpm: 5400 serial: <filter> rev: 0A80 scheme: GPT
ID-3: /dev/sdc maj-min: 8:32 vendor: Kingston model: SA400S37480G
size: 447.13 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
type: SSD serial: <filter> rev: 61K1 scheme: GPT
ID-4: /dev/sdd maj-min: 8:48 vendor: Kingston model: SV300S37A240G
size: 223.57 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
type: SSD serial: <filter> rev: BBF2 scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 446.83 GiB size: 438.75 GiB (98.19%)
used: 22.89 GiB (5.2%) fs: ext4 dev: /dev/sdc2 maj-min: 8:34 label: N/A
uuid: 3b8ddb35-dedc-4003-8bc2-8f193617c4a1
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 288 KiB (0.1%) fs: vfat dev: /dev/sdc1 maj-min: 8:33 label: NO_LABEL
uuid: CDC6-6D15
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/sda1 maj-min: 8:1 size: 100 MiB fs: vfat label: N/A
uuid: 0662-BC37
ID-2: /dev/sda2 maj-min: 8:2 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-3: /dev/sda3 maj-min: 8:3 size: 222.96 GiB fs: ntfs label: N/A
uuid: 287C89C57C898E6E
ID-4: /dev/sda4 maj-min: 8:4 size: 508 MiB fs: ntfs label: N/A
uuid: 125A22DA5A22B9FD
ID-5: /dev/sdb1 maj-min: 8:17 size: 1.34 TiB fs: ntfs label: TO
uuid: 2472C7BC72C790CA
ID-6: /dev/sdb2 maj-min: 8:18 size: 488.28 GiB fs: ext4 label: N/A
uuid: 1c526d42-fcbe-49f7-b82b-04776dd51c08
ID-7: /dev/sdd1 maj-min: 8:49 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-8: /dev/sdd2 maj-min: 8:50 size: 223.55 GiB fs: ntfs label: N/A
uuid: 78B09537B094FCB6
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 10 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-8:7 info: VIA Labs USB2.0 Hub ports: 4 rev: 2.1 speed: 480 Mb/s
chip-ID: 2109:2815 class-ID: 0900
Device-1: 1-8.2:9 info: Logitech USB Receiver type: Keyboard,Mouse,HID
driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s
power: 98mA chip-ID: 046d:c539 class-ID: 0300
Device-2: 1-8.4:10 info: Cambridge Silicon Radio Bluetooth Dongle (HCI mode)
type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s
power: 100mA chip-ID: 0a12:0001 class-ID: e001
Device-3: 1-10:8 info: Microsoft LifeCam Cinema type: Video,Audio
driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s
power: 500mA chip-ID: 045e:075d class-ID: 0102
Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-4: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-5: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-6: 5-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 5-1:4 info: Realtek Realtek 8812AU/8821AU 802.11ac WLAN Adapter
[USB Wireless Dual-Band Adapter 2.4/5Ghz]
type: Network driver: rtl88XXau interfaces: 1 rev: 2.1 speed: 480 Mb/s
power: 500mA chip-ID: 0bda:0811 class-ID: 0000 serial: <filter>
Device-2: 5-3:2 info: Arduino SA Leonardo (CDC ACM HID)
type: Abstract (modem),CDC-Data,HID driver: cdc_acm,hid-generic,usbhid
interfaces: 3 rev: 2.0 speed: 12 Mb/s power: 500mA chip-ID: 2341:8036
class-ID: 0300 serial: <filter>
Device-3: 5-4:3
info: Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard
type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0
speed: 12 Mb/s power: 500mA chip-ID: 1b1c:1b49 class-ID: 0300
serial: <filter>
Hub-7: 6-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 51.9 C mobo: N/A gpu: nouveau temp: 50.0 C
Fan Speeds (RPM): N/A gpu: nouveau fan: 0
Info:
Processes: 363 Uptime: 6m wakeups: 3 Init: systemd v: 249 tool: systemctl
Compilers: gcc: 11.1.0 Packages: 1224 pacman: 1217 lib: 332 flatpak: 0
snap: 7 Shell: Zsh v: 5.8 default: Bash v: 5.1.8 running-in: konsole
inxi: 3.3.08
If there is any more info I can provide do let me know, as I’m a newbie to Linux in general