How to install lxqt desktop using manjaro xfce? System gives me error

juandelgado3619 · 21 December 2023 15:52

i follow steps on this webpage Install Desktop Environments - Manjaro
Sistem gives this error:

$sudo pacman -S lxqt xscreensaver
[sudo] contraseña para juand:
:: Hay 23 miembros en el grupo lxqt:
:: Repositorio extra

lximage-qt 2) lxqt-about 3) lxqt-admin 4) lxqt-archiver 5) lxqt-config 6) lxqt-globalkeys
lxqt-notificationd 8) lxqt-openssh-askpass 9) lxqt-panel 10) lxqt-policykit 11) lxqt-powermanagement
lxqt-qtplugin 13) lxqt-runner 14) lxqt-session 15) lxqt-sudo 16) lxqt-themes 17) obconf-qt 18) openbox
pavucontrol-qt 20) pcmanfm-qt 21) qterminal 22) screengrab 23) xdg-desktop-portal-lxqt

Introduzca una selección (por omisión=todos):
resolviendo dependencias…
buscando conflictos entre paquetes…
:: pipewire-pulse y pulseaudio están en conflicto. ¿Quitar pulseaudio? [s/N] s
:: pipewire-pulse y pulseaudio-bluetooth están en conflicto. ¿Quitar pulseaudio-bluetooth? [s/N] s
:: pipewire-pulse y manjaro-pulse están en conflicto. ¿Quitar manjaro-pulse? [s/N] s
error: no se pudo preparar la operación (no se pudo satisfacer las dependencias)
:: quitando pulseaudio se rompe la dependencia con «pulseaudio=16.1-6», necesaria para el paquete pulseaudio-zeroconf

zbe · 21 December 2023 18:00

So you were told numerous times in your previous topic how to properly post terminal output and yet you just can’t be bothered to read those posts and/or HowTo or what?

juandelgado3619 · 21 December 2023 19:01

$inxi -Fazy
System:
Kernel: 6.6.5-1-rt16-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: hpet available: acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.6-rt-x86_64
root=UUID=60974d4e-eeae-4e3d-ae02-9e14ddd5f478 rw quiet splash apparmor=1
security=apparmor resume=UUID=7e039ab2-1472-4378-85bf-81513d211366
udev.log_priority=3
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm
v: 4.18.0 vt: 7 dm: LightDM v: 1.32.0 Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Other-vm? System: Intel product: Intel powered classmate PC v: MP PV
serial: Chassis: Intel type: 1
serial:
Mobo: Intel model: Intel powered classmate PC v: MP PV
serial: BIOS: Phoenix
v: MPPNV10A.86A.0020.2010.0708.1535 date: 07/08/2010
Battery:
ID-1: BAT1 charge: 27.4 Wh (100.0%) condition: 27.4/31.7 Wh (86.4%)
volts: 16.2 min: 14.4 model: ECS CMPC type: Li-ion serial:
status: full
CPU:
Info: model: Intel Atom N450 bits: 64 type: MT arch: Bonnell level: v1
built: 2008-13 process: Intel 45nm family: 6 model-id: 0x1C (28)
stepping: 0xA (10) microcode: 0x107
Topology: cpus: 1x cores: 1 tpc: 2 threads: 2 smt: enabled cache:
L1: 56 KiB desc: d-1x24 KiB; i-1x32 KiB L2: 512 KiB desc: 1x512 KiB
Speed (MHz): avg: 1662 min/max: 1000/1667 scaling: driver: acpi-cpufreq
governor: schedutil cores: 1: 1662 2: 1662 bogomips: 6649
Flags: ht lm nx pae sse sse2 sse3 ssse3
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass status: Not affected
Type: spectre_v1 status: Not affected
Type: spectre_v2 status: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics
vendor: Elite Systems driver: i915 v: kernel arch: PowerVR SGX535
process: Intel 45-130nm ports: active: LVDS-1 empty: VGA-1 bus-ID: 00:02.0
chip-ID: 8086:a011 class-ID: 0300
Device-2: Chicony USB 2.0 Camera driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 2-4:2 chip-ID: 04f2:b191
class-ID: 0e02
Display: x11 server: X.org v: 1.21.1.9 compositor: xfwm v: 4.18.0 driver:
X: loaded: intel unloaded: modesetting alternate: fbdev,vesa dri: i915
gpu: i915 display-ID: :0.0 note: <missing: xdpyinfo/xrandr>
Monitor-1: LVDS-1 model: Seiko Epson 0x3052 built: 2010 res: 1024x600
dpi: 117 gamma: 1.2 size: 223x125mm (8.78x4.92") diag: 256mm (10.1")
ratio: 16:9 modes: 1024x600
API: EGL v: 1.5 hw: drv: intel i915 platforms: device: 0 egl: 1.4 drv: i915
device: 1 drv: swrast surfaceless: egl: 1.4 drv: i915 x11: egl: 1.4 drv: i915
inactive: gbm,wayland
API: OpenGL v: 4.5 compat-v: 2.1 vendor: mesa v: 23.1.9-manjaro1.1
glx-v: 1.4 direct-render: yes renderer: i915 (: Pineview M)
device-ID: 8086:a011 memory: 375 MiB unified: yes
Audio:
Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: Elite Systems
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:27d8
class-ID: 0403
API: ALSA v: k6.6.5-1-rt16-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 0.3.85 status: off tools: pw-cli
Server-3: PulseAudio v: 16.1 status: active with: pulseaudio-alsa
type: plugin tools: pacat,pactl,pavucontrol
Network:
Device-1: Realtek RTL810xE PCI Express Fast Ethernet vendor: Elite Systems
driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 2000
bus-ID: 07:00.0 chip-ID: 10ec:8136 class-ID: 0200
IF: enp7s0 state: down mac:
Device-2: Realtek RTL8191SEvB Wireless LAN driver: rtl8192se v: kernel
pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 09:00.0
chip-ID: 10ec:8172 class-ID: 0280
IF: wlp9s0 state: up mac:
Drives:
Local Storage: total: 149.05 GiB used: 48.6 GiB (32.6%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: HM160HI size: 149.05 GiB
block-size: physical: 512 B logical: 512 B speed: 1.5 Gb/s tech: N/A
serial: fw-rev: 0-08 scheme: MBR
Partition:
ID-1: / raw-size: 144.83 GiB size: 141.5 GiB (97.70%) used: 48.08 GiB (34.0%)
fs: ext4 dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes
compressor: zstd max-pool: 20%
ID-1: swap-1 type: partition size: 4.21 GiB used: 534.4 MiB (12.4%)
priority: -2 dev: /dev/sda2 maj-min: 8:2
Sensors:
System Temperatures: cpu: 86.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Processes: 205 Uptime: 3h 25m wakeups: 0 Memory: total: 2 GiB
available: 1.92 GiB used: 1.22 GiB (63.6%) Init: systemd v: 254
default: graphical tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6
Packages: 1211 pm: pacman pkgs: 1191 libs: 355 tools: pamac pm: flatpak
pkgs: 9 pm: snap pkgs: 11 Shell: Bash v: 5.2.15 running-in: xfce4-terminal
inxi: 3.3.31

zbe · 21 December 2023 19:06

Dude… please read first post and either put three backticks around output or use </> button: [HowTo] Post command output and file content as formatted text