Hi! I can`t see SMART info for one of my HDDs with KDE Partition Manager.
But, as I assume, I can see it with Gnome Disk Utility.
cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=f6009204-c810-4b34-9235-ef07cd3f1369 / ext4 defaults,relatime 0 1
UUID=a87dd98f-54f9-4356-aaaf-7d77ba883729 /home ext4 defaults,relatime 0 2
UUID=59588fdf-182d-4e43-bafc-e3ac1ba86423 /hidden/HDD1 ext4 defaults,relatime 0 2
UUID=5d8495e8-0282-47c2-8a55-95e1cae71cbf /hidden/HDD2 ext4 defaults,relatime 0 2
UUID=beadb108-0120-49c5-85b5-1841321755d9 none swap defaults,noatime 0 0
tmpfs /tmp tmpfs defaults,relatime,mode=1777 0 0
sudo smartctl --all /dev/sdb
[sudo] пароль для kodirovshchik:
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.15-1-MANJARO] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Black
Device Model: WDC WD1001FALS-00E8B0
Serial Number: WD-WMATV4144710
LU WWN Device Id: 5 0014ee 001c8087c
Firmware Version: 05.00K05
User Capacity: 1.000.203.804.160 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Mon Feb 15 11:31:25 2021 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (18600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 214) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 253 226 021 Pre-fail Always - 1141
4 Start_Stop_Count 0x0032 092 092 000 Old_age Always - 8862
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 050 050 000 Old_age Always - 36978
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3355
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 108
193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 8844
194 Temperature_Celsius 0x0022 117 104 000 Old_age Always - 33
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 8 inconsistent with error log pointer 1
ATA Error Count: 8 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 8 occurred at disk power-on lifetime: 22979 hours (957 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 53 10 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d6 01 e0 4f c2 00 00 00:27:34.836 SMART WRITE LOG
ec 00 00 00 00 00 00 00 00:27:34.835 IDENTIFY DEVICE
b0 d5 01 e0 4f c2 00 00 00:27:03.994 SMART READ LOG
b0 d5 01 e0 4f c2 00 00 00:27:03.493 SMART READ LOG
b0 d5 01 e0 4f c2 00 00 00:27:02.993 SMART READ LOG
Error 7 occurred at disk power-on lifetime: 22979 hours (957 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 53 10 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d6 01 e0 4f c2 00 00 00:26:34.459 SMART WRITE LOG
ec 00 00 00 00 00 00 00 00:26:34.458 IDENTIFY DEVICE
b0 d5 01 e0 4f c2 00 00 00:25:49.096 SMART READ LOG
b0 d5 01 e0 4f c2 00 00 00:25:48.595 SMART READ LOG
b0 d5 01 e0 4f c2 00 00 00:25:48.095 SMART READ LOG
Error 6 occurred at disk power-on lifetime: 22979 hours (957 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 53 10 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d6 01 e0 4f c2 00 00 00:25:19.562 SMART WRITE LOG
ec 00 00 00 00 00 00 00 00:25:19.561 IDENTIFY DEVICE
b0 d6 01 e0 4f c2 00 00 00:24:46.162 SMART WRITE LOG
ec 00 00 00 00 00 00 00 00:24:46.162 IDENTIFY DEVICE
b0 d5 01 e0 4f c2 00 00 00:24:45.661 SMART READ LOG
Error 5 occurred at disk power-on lifetime: 22979 hours (957 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 53 10 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d6 01 e0 4f c2 00 00 00:24:46.162 SMART WRITE LOG
ec 00 00 00 00 00 00 00 00:24:46.162 IDENTIFY DEVICE
b0 d5 01 e0 4f c2 00 00 00:24:45.661 SMART READ LOG
b0 d5 01 e0 4f c2 00 00 00:24:45.661 SMART READ LOG
b0 d5 01 e0 4f c2 00 00 00:24:45.160 SMART READ LOG
Error 4 occurred at disk power-on lifetime: 22979 hours (957 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 53 10 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d6 01 e0 4f c2 00 00 00:24:16.127 SMART WRITE LOG
b0 d6 01 e0 4f c2 00 00 00:24:16.127 SMART WRITE LOG
ec 00 00 00 00 00 00 00 00:24:16.126 IDENTIFY DEVICE
b0 d5 01 e0 4f c2 00 00 00:23:52.316 SMART READ LOG
b0 d5 01 e0 4f c2 00 00 00:23:51.815 SMART READ LOG
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 36846 -
# 2 Short offline Completed without error 00% 33133 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Do I have a hardware problem?