Vban Fehler und ich komme nicht mehr weiter (Linux Anfänger)

Hallo,

ich komme von Garuda Linux und versuche hier mein Vban zum Laufen zu bekommen.

Unter Garuda hat der Befehl (vban_emitter -i 192.168.178.40 -p 5555 -s Micro -b pulseaudio -d Mikrofon -r 48000) ohne Probleme funktioniert.

Unter Manjaro schmeißt er mit folgenden Fehler

vban_emitter version 2.1.0

Fatal: pulseaudio_open: open error: No such entity

Bin leider kompletter Neuling unter Linux…

Danke an alle die Helfen ^^

Hallo @ToTesFeuer und willkommen :wink:

Wenn ich das richtig sehe versuchst du ein Gerät abzugreifen, der nicht oder nicht mit diesem Name existiert.

Prüfe mal wieder dieser bei dir heißt…

pacmd list-sinks

Versuch mal eher den Index zu verwenden, als den Namen.

@megavolt danke dir für deine schnelle Antwort :slight_smile:

Also ich habe es mal versucht und habe auch mein Micro gefunden. Wenn ich da jetzt die Zahl vom Index rein schreibe dann überträgt er auch was zum anderen Pc. Leider aber das Falsche :smiley: er übertragt dann meine Musik…

Hier noch den Index den ich genommen habe. Ich versuche von meinem Linux Rechner das Microphone auf den Zweiten Rechner (Windoof) zu übertragen.

 index: 3
        name: <nui_mic_raw_in>
        driver: <module-ladspa-sink.c>
        flags: HW_MUTE_CTRL LATENCY DYNAMIC_LATENCY
        state: RUNNING
        suspend cause: (none)
        priority: 1000
        volume: front-left: 65536 / 100%,   front-right: 65536 / 100%
                balance 0.00
        base volume: 65536 / 100%
        volume steps: 65537
        muted: no
        current latency: 0.79 ms
        max request: 0 KiB
        max rewind: 0 KiB
        monitor source: 6
        sample spec: float32le 2ch 48000Hz
        channel map: front-left,front-right
                     Stereo
        used by: 1
        linked by: 1
        configured latency: 2.50 ms; range is 0.50 .. 2000.00 ms
        module: 32
        properties:
                device.master_device = "nui_mic_denoised_out"
                device.class = "filter"
                device.ladspa.module = "/tmp/librnnoise-2354048738.so"
                device.ladspa.label = "noisetorch"
                device.ladspa.name = "NoiseTorch rnnoise ladspa module"
                device.ladspa.maker = "lawl"
                device.ladspa.copyright = "GPL3+"
                device.ladspa.unique_id = "16682994"
                device.description = "LADSPA Plugin NoiseTorch rnnoise ladspa module on Null-Ausgabe"
                device.icon_name = "audio-card"

und hier noch der komplette output

    ~  pacmd list-sinks                                                                                                                             ✔ 
10 sink(s) available.
    index: 1
        name: <alsa_output.usb-Kingston_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo>
        driver: <module-alsa-card.c>
        flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: RUNNING
        suspend cause: (none)
        priority: 9049
        volume: front-left: 26418 /  40% / -23.67 dB,   front-right: 26418 /  40% / -23.67 dB
                balance 0.00
        base volume: 54094 /  83% / -5.00 dB
        volume steps: 65537
        muted: no
        current latency: 70.65 ms
        max request: 12 KiB
        max rewind: 12 KiB
        monitor source: 3
        sample spec: s16le 2ch 48000Hz
        channel map: front-left,front-right
                     Stereo
        used by: 4
        linked by: 5
        configured latency: 66.67 ms; range is 36.00 .. 1837.50 ms
        card: 4 <alsa_card.usb-Kingston_HyperX_Virtual_Surround_Sound_00000000-00>
        module: 10
        properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "USB Audio"
                alsa.id = "USB Audio"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "4"
                alsa.card_name = "HyperX Virtual Surround Sound"
                alsa.long_card_name = "Kingston HyperX Virtual Surround Sound at usb-0000:2b:00.3-1, full speed"
                alsa.driver_name = "snd_usb_audio"
                device.bus_path = "pci-0000:2b:00.3-usb-0:1:1.0"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:2b:00.3/usb7/7-1/7-1:1.0/sound/card4"
                udev.id = "usb-Kingston_HyperX_Virtual_Surround_Sound_00000000-00"
                device.bus = "usb"
                device.vendor.id = "0951"
                device.vendor.name = "Kingston Technology"
                device.product.id = "16a4"
                device.product.name = "HyperX 7.1 Audio"
                device.serial = "Kingston_HyperX_Virtual_Surround_Sound_00000000"
                device.string = "front:4"
                device.buffering.buffer_size = "352800"
                device.buffering.fragment_size = "176400"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "HyperX 7.1 Audio Analog Stereo"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-usb"
        ports:
                analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
                        properties:

        active port: <analog-output>
    index: 2
        name: <nui_mic_denoised_out>
        driver: <module-null-sink.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: RUNNING
        suspend cause: (none)
        priority: 1000
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.85 ms
        max request: 0 KiB
        max rewind: 0 KiB
        monitor source: 5
        sample spec: s16le 2ch 48000Hz
        channel map: front-left,front-right
                     Stereo
        used by: 1
        linked by: 2
        configured latency: 2.50 ms; range is 0.50 .. 2000.00 ms
        module: 31
        properties:
                device.description = "Null-Ausgabe"
                device.class = "abstract"
                device.icon_name = "audio-card"
    index: 3
        name: <nui_mic_raw_in>
        driver: <module-ladspa-sink.c>
        flags: HW_MUTE_CTRL LATENCY DYNAMIC_LATENCY
        state: RUNNING
        suspend cause: (none)
        priority: 1000
        volume: front-left: 65536 / 100%,   front-right: 65536 / 100%
                balance 0.00
        base volume: 65536 / 100%
        volume steps: 65537
        muted: no
        current latency: 0.79 ms
        max request: 0 KiB
        max rewind: 0 KiB
        monitor source: 6
        sample spec: float32le 2ch 48000Hz
        channel map: front-left,front-right
                     Stereo
        used by: 1
        linked by: 1
        configured latency: 2.50 ms; range is 0.50 .. 2000.00 ms
        module: 32
        properties:
                device.master_device = "nui_mic_denoised_out"
                device.class = "filter"
                device.ladspa.module = "/tmp/librnnoise-2354048738.so"
                device.ladspa.label = "noisetorch"
                device.ladspa.name = "NoiseTorch rnnoise ladspa module"
                device.ladspa.maker = "lawl"
                device.ladspa.copyright = "GPL3+"
                device.ladspa.unique_id = "16682994"
                device.description = "LADSPA Plugin NoiseTorch rnnoise ladspa module on Null-Ausgabe"
                device.icon_name = "audio-card"
    index: 18
        name: <Virtual_Output_B1_sink>
        driver: <module-null-sink.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: IDLE
        suspend cause: (none)
        priority: 1000
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 1686.53 ms
        max request: 344 KiB
        max rewind: 344 KiB
        monitor source: 23
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 1
        configured latency: 2000.00 ms; range is 0.50 .. 2000.00 ms
        module: 39
        properties:
                device.description = "Null-Ausgabe"
                device.class = "abstract"
                device.icon_name = "audio-card"
    index: 19
        name: <Virtual_Output_B2_sink>
        driver: <module-null-sink.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: IDLE
        suspend cause: (none)
        priority: 1000
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 1702.14 ms
        max request: 344 KiB
        max rewind: 344 KiB
        monitor source: 25
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 1
        configured latency: 2000.00 ms; range is 0.50 .. 2000.00 ms
        module: 41
        properties:
                device.description = "Null-Ausgabe"
                device.class = "abstract"
                device.icon_name = "audio-card"
    index: 20
        name: <Virtual_Output_B3_sink>
        driver: <module-null-sink.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: IDLE
        suspend cause: (none)
        priority: 1000
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 1705.43 ms
        max request: 344 KiB
        max rewind: 344 KiB
        monitor source: 27
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 1
        configured latency: 2000.00 ms; range is 0.50 .. 2000.00 ms
        module: 43
        properties:
                device.description = "Null-Ausgabe"
                device.class = "abstract"
                device.icon_name = "audio-card"
  * index: 22
        name: <Desktop>
        driver: <module-null-sink.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: RUNNING
        suspend cause: (none)
        priority: 1000
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.38 ms
        max request: 1 KiB
        max rewind: 1 KiB
        monitor source: 30
        sample spec: s16le 2ch 48000Hz
        channel map: front-left,front-right
                     Stereo
        used by: 3
        linked by: 6
        configured latency: 7.50 ms; range is 0.50 .. 2000.00 ms
        module: 46
        properties:
                device.description = "Desktop"
                device.class = "abstract"
                device.icon_name = "audio-card"
    index: 23
        name: <Chat>
        driver: <module-null-sink.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: IDLE
        suspend cause: (none)
        priority: 1000
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 12.04 ms
        max request: 4 KiB
        max rewind: 4 KiB
        monitor source: 31
        sample spec: s16le 2ch 48000Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 3
        configured latency: 25.00 ms; range is 0.50 .. 2000.00 ms
        module: 47
        properties:
                device.description = "Chat"
                device.class = "abstract"
                device.icon_name = "audio-card"
    index: 24
        name: <Music>
        driver: <module-null-sink.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: RUNNING
        suspend cause: (none)
        priority: 1000
        volume: front-left: 32768 /  50% / -18.06 dB,   front-right: 32768 /  50% / -18.06 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 6.93 ms
        max request: 4 KiB
        max rewind: 4 KiB
        monitor source: 32
        sample spec: s16le 2ch 48000Hz
        channel map: front-left,front-right
                     Stereo
        used by: 1
        linked by: 4
        configured latency: 25.00 ms; range is 0.50 .. 2000.00 ms
        module: 48
        properties:
                device.description = "Music"
                device.class = "abstract"
                device.icon_name = "audio-card"
    index: 33
        name: <alsa_output.pci-0000_29_00.1.hdmi-stereo>
        driver: <module-alsa-card.c>
        flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 9030
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max request: 0 KiB
        max rewind: 0 KiB
        monitor source: 41
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
        card: 2 <alsa_card.pci-0000_29_00.1>
        module: 8
        properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "HDMI 0"
                alsa.id = "HDMI 0"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "3"
                alsa.card = "0"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0xfc080000 irq 79"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:29:00.1"
                sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0"
                device.bus = "pci"
                device.vendor.id = "10de"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "10f8"
                device.product.name = "TU104 HD Audio Controller"
                device.string = "hdmi:0"
                device.buffering.buffer_size = "352768"
                device.buffering.fragment_size = "176384"
                device.access_mode = "mmap+timer"
                device.profile.name = "hdmi-stereo"
                device.profile.description = "Digital Stereo (HDMI)"
                device.description = "TU104 HD Audio Controller Digital Stereo (HDMI)"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        ports:
                hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
                        properties:
                                device.icon_name = "video-display"
                                device.product.name = "MD21850
     "
        active port: <hdmi-output-0>
    ~                                                                                                       ✔ 


Dann nimm dich einfach den Namen:

also: -d nui_mic_raw_in

Oder gib diesem Sink einen vernünftigen Name:

pactl load-module module-ladspa-sink sink_name="Mikrofon"

Hab es erst einmal versucht ohne Namen zu ändern…

    ~  vban_emitter -i 192.168.178.40 -p 5555 -s Micro -b pulseaudio -d <nui_mic_raw_in> -r 48000           ✔ 
zsh: datei oder Verzeichnis nicht gefunden: nui_mic_raw_in
    ~       

Hab ihn dann Versucht zu ändern. Aber das geht glaube ich nicht weil das Mikrophone ja Virtuell Erzeugt wurde

    ~  pactl load-module module-ladspa-sink sink_name=Mikrofon                                              ✔ 
Fehlgeschlagen: Modulinitialisierung fehlgeschlagen
    ~        

Ok habe es Geschafft :smiley:

Hab einfach den Befehl

pactl list

Dann das Micro raus gesucht und jetzt geht es!

Danke dir @megavolt

Deswegen liebe ich die Linux Community <3

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.