I’m still unable to, even after adding the parameter to the kernel and updating grub.
also, here’s my hardware and software info, I should’ve provided this earlier on but could be of use
System: Kernel: 5.13.13-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0 Desktop: KDE Plasma 5.22.5 tk: Qt 5.15.2
wm: kwin_x11 vt: 1 dm: SDDM Distro: Manjaro Linux base: Arch Linux
Machine: Type: Laptop System: HP product: OMEN by HP Laptop 15z-en100 v: N/A serial: <filter> Chassis: type: 10
serial: <filter>
Mobo: HP model: 88D1 v: 75.31 serial: <filter> UEFI: AMI v: F.06 date: 05/05/2021
Battery: ID-1: BAT0 charge: 65.0 Wh (93.0%) condition: 69.9/69.9 Wh (100.0%) volts: 13.2 min: 11.6 model: HP Primary
type: Li-ion serial: <filter> status: Charging cycles: 93
Memory: RAM: total: 15 GiB used: 2.56 GiB (17.1%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU: Info: 8-Core model: AMD Ryzen 7 5800H with Radeon Graphics bits: 64 type: MT MCP arch: Zen 3 rev: 0 cache:
L2: 4 MiB bogomips: 102241
Speed: 2070 MHz min/max: 1200/3200 MHz boost: enabled Core speeds (MHz): 1: 2070 2: 3131 3: 1197 4: 1454 5: 2504
6: 1197 7: 1574 8: 2539 9: 2090 10: 1727 11: 2072 12: 1332 13: 3184 14: 2032 15: 1578 16: 3084
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 bmi2 bpext cat_l3 cdp_l3 clflush
clflushopt clwb clzero cmov cmp_legacy constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc
cr8_legacy cx16 cx8 de decodeassists erms extapic extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt
ht hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr
mwaitx nonstop_tsc nopl npt nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq pdpe1gb
perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt pse pse36 rdpid rdpru rdrand rdseed rdt_a rdtscp
rep_good sep sha_ni skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall
tce topoext tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt
xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
Graphics: Device-1: NVIDIA GA106M [GeForce RTX 3060 Mobile / Max-Q] vendor: Hewlett-Packard driver: nvidia v: 470.63.01
bus-ID: 01:00.0 chip-ID: 10de:2520 class-ID: 0300
Device-2: Advanced Micro Devices [AMD/ATI] Cezanne vendor: Hewlett-Packard driver: amdgpu v: kernel bus-ID: 06:00.0
chip-ID: 1002:1638 class-ID: 0300
Device-3: Quanta HP Wide Vision HD Camera type: USB driver: uvcvideo bus-ID: 1-3:3 chip-ID: 0408:5425
class-ID: fe01 serial: <filter>
Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver: loaded: modesetting,nvidia
resolution: 2560x1440~165Hz s-dpi: 96
OpenGL: renderer: NVIDIA GeForce RTX 3060 Laptop GPU/PCIe/SSE2 v: 4.6.0 NVIDIA 470.63.01 direct render: Yes
Audio: Device-1: NVIDIA vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus-ID: 01:00.1 chip-ID: 10de:228e
class-ID: 0403
Device-2: Advanced Micro Devices [AMD] Raven/Raven2/FireFlight/Renoir Audio Processor vendor: Hewlett-Packard
driver: snd_rn_pci_acp3x v: kernel bus-ID: 06:00.5 chip-ID: 1022:15e2 class-ID: 0480
Device-3: Advanced Micro Devices [AMD] Family 17h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
bus-ID: 06:00.6 chip-ID: 1022:15e3 class-ID: 0403
Sound Server-1: ALSA v: k5.13.13-1-MANJARO running: yes
Sound Server-2: sndio v: N/A running: no
Sound Server-3: JACK v: 1.9.19 running: no
Sound Server-4: PulseAudio v: 15.0 running: yes
Sound Server-5: PipeWire v: 0.3.34 running: yes
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Hewlett-Packard driver: r8169 v: kernel
port: e000 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: eno1 state: down mac: <filter>
Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel port: e000 bus-ID: 03:00.0 chip-ID: 8086:2723
class-ID: 0280
IF: wlo1 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth: Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-4:5 chip-ID: 8087:0029 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 0 state: down bt-service: enabled,running rfk-block: hardware: no software: yes
address: see --recommends
Logical: Message: No logical block device data found.
RAID: Message: No RAID data found.
Drives: Local Storage: total: 506.66 GiB used: 196.31 GiB (38.7%)
ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB type: SSD serial: <filter> scheme: MBR
ID-2: /dev/nvme0n1 vendor: Micron model: MTFDHBA512TDV-1AZ1AABHA size: 476.94 GiB speed: 31.6 Gb/s lanes: 4
type: SSD serial: <filter> rev: HPS0032 temp: 37.9 C scheme: GPT
Message: No optical or floppy data found.
Partition: ID-1: / size: 468.09 GiB used: 174.85 GiB (37.4%) fs: ext4 dev: /dev/nvme0n1p2 label: N/A
uuid: f58d186c-787a-44a3-9672-63cd926737b6
ID-2: /boot/efi size: 299.4 MiB used: 288 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 label: NO_LABEL uuid: 76CB-9079
ID-3: /run/media/alisonkit/6238-3563 size: 29.71 GiB used: 21.46 GiB (72.2%) fs: vfat dev: /dev/mmcblk0p1
label: N/A uuid: 6238-3563
Swap: Alert: No swap data was found.
Unmounted: Message: No unmounted partitions found.
USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-2:2 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 05e3:0608
class-ID: 0900
Device-1: 1-2.1:4 info: XP-Pen 15.6 inch PenDisplay type: Mouse,HID driver: hid-generic,usbfs,usbhid interfaces: 3
rev: 1.1 speed: 12 Mb/s power: 70mA chip-ID: 28bd:090d class-ID: 0300
Device-2: 1-2.2:6 info: Logitech Keyboard K120 type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1
speed: 1.5 Mb/s power: 90mA chip-ID: 046d:c31c class-ID: 0300
Device-3: 1-2.4:7 info: Microsoft Basic Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1
speed: 1.5 Mb/s power: 100mA chip-ID: 045e:0084 class-ID: 0301
Device-4: 1-3:3 info: Quanta HP Wide Vision HD Camera type: Video driver: uvcvideo interfaces: 3 rev: 2.0
speed: 480 Mb/s power: 500mA chip-ID: 0408:5425 class-ID: fe01 serial: <filter>
Device-5: 1-4:5 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s
power: 100mA chip-ID: 8087:0029 class-ID: e001
Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900
Hub-4: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-5: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900
Sensors: System Temperatures: cpu: 60.0 C mobo: N/A
Fan Speeds (RPM): N/A
GPU: device: nvidia screen: :0.0 temp: 46 C device: amdgpu temp: 47.0 C
Info: Processes: 392 Uptime: 12m wakeups: 1 Init: systemd v: 248 Compilers: gcc: 11.1.0 clang: 12.0.1 Packages: 1562
pacman: 1547 flatpak: 11 snap: 4 Shell: Zsh v: 5.8 default: Bash v: 5.1.8 running-in: yakuake inxi: 3.3.06