Hello! I recently decided to change from Manjaro KDE to Manjaro GNOME and I’m attempting to use an external monitor to extend my display. My computer detects the connection, however it doesn’t appear in the display tab on settings. Below my inxi output:
System:
Kernel: 6.1.31-2-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.1.1
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1-x86_64
root=UUID=e9916a00-a876-47a0-98c0-839554ba0645 rw quiet splash apparmor=1
security=apparmor udev.log_priority=3
Desktop: GNOME v: 44.1 tk: GTK v: 3.24.37 wm: gnome-shell dm: GDM v: 44.1
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Convertible System: ASUSTeK product: Q525UAR v: 1.0
serial: <superuser required>
Mobo: ASUSTeK model: Q525UAR v: 1.0 serial: <superuser required>
UEFI: American Megatrends v: Q525UAR.309 date: 09/28/2018
Battery:
ID-1: BAT0 charge: 2.2 Wh (9.1%) condition: 24.3/52.6 Wh (46.3%) volts: 11.6
min: 11.6 model: ASUSTeK ASUS Battery type: Li-ion serial: N/A
status: charging cycles: 235
Device-1: hid-0018:04F3:2702.0001-battery model: ELAN2702:00 04F3:2702
serial: N/A charge: N/A status: N/A
CPU:
Info: model: Intel Core i7-8550U bits: 64 type: MT MCP arch: Coffee Lake
gen: core 8 level: v3 note: check built: 2017 process: Intel 14nm family: 6
model-id: 0x8E (142) stepping: 0xA (10) microcode: 0xF2
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 1852 high: 2164 min/max: 400/4000 scaling:
driver: intel_pstate governor: powersave cores: 1: 2069 2: 2000 3: 1514
4: 2000 5: 1530 6: 2000 7: 1540 8: 2164 bogomips: 32012
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: conditional,
RSB filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel UHD Graphics 620 vendor: ASUSTeK driver: i915 v: kernel
arch: Gen-9.5 process: Intel 14nm built: 2016-20 ports: active: eDP-1
empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:5917
class-ID: 0300
Device-2: USB C Video Adaptor driver: N/A type: USB rev: 2.0 speed: 12 Mb/s
lanes: 1 mode: 1.1 bus-ID: 1-3.3.3:10 chip-ID: 25a4:9311 class-ID: 1100
serial: <filter>
Device-3: IMC Networks USB2.0 HD UVC WebCam driver: uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-5:5 chip-ID: 13d3:5694
class-ID: 0e02 serial: <filter>
Display: wayland server: X.org v: 1.21.1.8 with: Xwayland v: 23.1.1
compositor: gnome-shell driver: gpu: i915 display-ID: 0
Monitor-1: eDP-1 model: AU Optronics 0x21ed built: 2016 res: 1920x1080
dpi: 142 gamma: 1.2 size: 344x193mm (13.54x7.6") diag: 394mm (15.5")
ratio: 16:9 modes: 1920x1080
API: OpenGL v: 4.6 Mesa 23.0.4 renderer: Mesa Intel UHD Graphics 620 (KBL
GT2) direct-render: Yes
Audio:
Device-1: Intel Sunrise Point-LP HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel alternate: snd_soc_skl, snd_soc_avs,
snd_sof_pci_intel_skl bus-ID: 00:1f.3 chip-ID: 8086:9d71 class-ID: 0403
API: ALSA v: k6.1.31-2-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 0.3.70 status: off tools: pw-cli
Server-3: PulseAudio v: 16.1 status: active with: pulseaudio-alsa
type: plugin tools: pacat,pactl
Network:
Device-1: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 8086:24fd class-ID: 0280
IF: wlp2s0 state: up mac: <filter>
Device-2: Realtek RTL8153 Gigabit Ethernet Adapter driver: r8152 type: USB
rev: 3.0 speed: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 bus-ID: 2-3.3:4
chip-ID: 0bda:8153 class-ID: 0000 serial: <filter>
IF: enp0s20f0u3u3 state: down mac: <filter>
Device-3: Realtek RTL8153 Gigabit Ethernet Adapter driver: cdc_ncm
type: USB rev: 3.2 speed: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 bus-ID: 2-3.4.4:7
chip-ID: 0bda:8153 class-ID: 0a00 serial: <filter>
IF: eth1 state: down mac: <filter>
Bluetooth:
Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB
rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-8:8 chip-ID: 8087:0a2b
class-ID: e001
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Drives:
Local Storage: total: 1.82 TiB used: 56.47 GiB (3.0%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST2000LM007-1R8174
size: 1.82 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 5400 serial: <filter> fw-rev: SDM3 scheme: GPT
Partition:
ID-1: / raw-size: 1.82 TiB size: 1.79 TiB (98.37%) used: 56.46 GiB (3.1%)
fs: ext4 dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 288 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 43.0 C pch: 41.5 C mobo: N/A
Fan Speeds (RPM): cpu: 0
Info:
Processes: 264 Uptime: 9m wakeups: 3 Memory: available: 15.51 GiB
used: 3.31 GiB (21.3%) Init: systemd v: 253 default: graphical
tool: systemctl Compilers: gcc: 13.1.1 clang: 15.0.7 Packages: 1366
pm: pacman pkgs: 1360 libs: 362 tools: gnome-software,pamac pm: flatpak
pkgs: 6 Shell: Zsh v: 5.9 running-in: gnome-terminal inxi: 3.3.27
also my lsusb output:
Bus 002 Device 013: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter
Bus 002 Device 012: ID 0bda:0409 Realtek Semiconductor Corp. USB3.2 Hub
Bus 002 Device 011: ID 0bda:0409 Realtek Semiconductor Corp. USB3.2 Hub
Bus 002 Device 002: ID 0bda:0411 Realtek Semiconductor Corp. Hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 011: ID 04f3:0903 Elan Microelectronics Corp. ELAN:Fingerprint
Bus 001 Device 008: ID 8087:0a2b Intel Corp. Bluetooth wireless interface
Bus 001 Device 005: ID 13d3:5694 IMC Networks USB2.0 HD UVC WebCam
Bus 001 Device 021: ID 0bda:1100 Realtek Semiconductor Corp. HID Device
Bus 001 Device 022: ID 0bda:54bb Realtek Semiconductor Corp. BillBoard Device -> Thid one
Bus 001 Device 020: ID 0bda:5409 Realtek Semiconductor Corp. USB2.1 Hub
Bus 001 Device 019: ID 0bda:5409 Realtek Semiconductor Corp. USB2.1 Hub
Bus 001 Device 007: ID 04b3:310b IBM Corp. Red Wheel Mouse
Bus 001 Device 004: ID 05ac:024f Apple, Inc. Aluminium Keyboard (ANSI)
Bus 001 Device 002: ID 0bda:5411 Realtek Semiconductor Corp. RTS5411 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
How should I proceed with this? Are there any default drivers I should have for this monitor?