Upower.service failed to start

[zxcwhale]

The upower.service failed to start after update.
And I check “lld /usr/lib/upowerd” got this:

ldd /usr/lib/upowerd
    linux-vdso.so.1 (0x00007ffc7a906000)
    libupower-glib.so.3 => /usr/lib/libupower-glib.so.3 (0x00007f722cb9c000)
    libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0x00007f722ca51000)
    libgobject-2.0.so.0 => /usr/lib/libgobject-2.0.so.0 (0x00007f722c9ef000)
    libgio-2.0.so.0 => /usr/lib/libgio-2.0.so.0 (0x00007f722c819000)
    libgudev-1.0.so.0 => /usr/lib/libgudev-1.0.so.0 (0x00007f722c80c000)
    libimobiledevice-1.0.so.6 => /usr/lib/libimobiledevice-1.0.so.6 (0x00007f722c7e4000)
    libplist-2.0.so.4 => /usr/lib/libplist-2.0.so.4 (0x00007f722c7c8000)
    libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0x00007f722c7a3000)
    libc.so.6 => /usr/lib/libc.so.6 (0x00007f722c5b9000)
    libpcre2-8.so.0 => /usr/lib/libpcre2-8.so.0 (0x00007f722c51e000)
    libffi.so.8 => /usr/lib/libffi.so.8 (0x00007f722c513000)
    libgmodule-2.0.so.0 => /usr/lib/libgmodule-2.0.so.0 (0x00007f722c50c000)
    libz.so.1 => /usr/lib/libz.so.1 (0x00007f722c4f0000)
    libmount.so.1 => /usr/lib/libmount.so.1 (0x00007f722c49f000)
    libudev.so.1 => /usr/lib/libudev.so.1 (0x00007f722c46b000)
    libimobiledevice-glue-1.0.so.0 => /usr/lib/libimobiledevice-glue-1.0.so.0 (0x00007f722c45e000)
    libusbmuxd-2.0.so.6 => /usr/lib/libusbmuxd-2.0.so.6 (0x00007f722c453000)
    libplist-2.0.so.3 => not found
    libssl.so.1.1 => /usr/lib/libssl.so.1.1 (0x00007f722c3bc000)
    libcrypto.so.1.1 => /usr/lib/libcrypto.so.1.1 (0x00007f722c0df000)
    libpthread.so.0 => /usr/lib/libpthread.so.0 (0x00007f722c0da000)
    libm.so.6 => /usr/lib/libm.so.6 (0x00007f722bfed000)
    /lib64/ld-linux-x86-64.so.2 => /usr/lib64/ld-linux-x86-64.so.2 (0x00007f722cc19000)
    libblkid.so.1 => /usr/lib/libblkid.so.1 (0x00007f722bfb1000)
    libcap.so.2 => /usr/lib/libcap.so.2 (0x00007f722bfa3000)
    libplist-2.0.so.3 => not found 

The latest version libplist was already installed , as you can see libplist-2.0.so.4 was found.

 libplist-2.0.so.4 => /usr/lib/libplist-2.0.so.4 (0x00007f722c7c8000)

Then why libplist-2.0.so.3 was also required?
And what should I do.
Best regards.

[megavolt]

@zxcwhale

Then why libplist-2.0.so.3 was also required?

AUR packages installed, which replace system packages? There was an equal issue in Deutsch .

Gnome Einstellungen starten nicht mehr -> Problem mit upower

Danke an @megavolt, der mir dann tatkräftig bei der Lösung geholfen hat! Das Problem lagt bei einer fehlerhaften Abhängigkeit von upower zum AUR Paket libimobiledevice was im Zusammenhang mit dem AUR Paket libplist-gitstand. Insgesamt hat dann das zum Erfolg geführt: removed libplist-git (1:2.2.0.r137.gbfc9778-1) installed libplist (2.3.0-1) removed libimobiledevice-git (1:1.3.0.r176.gcc540a2-1) installed libimobiledevice (1.3.0-8) removed libimobiledevice-glue-git Entschuldigt die verspätet…

[zxcwhale]

Oh, that really is the issue.
With install libimobiledevice in “Add/Remove Software” , it successfully replace libimobiledevice-git.
And now ldd is okay, and upower.service is also okay after restart.
Thanks a lot.