Unable to find main drive

I’m trying to install Manjaro KDE on my laptop. I am able to get the installer to boot but it is unable to find my drive. I have 2 drive both 1tb. One of them is a Hard Drive and a NVME M.2 Drive. The M.2 drive is not being recognised. I am new to Linux so any help would be appreciate any help I can get.
The out put of inxi --admin --verbosity=7 --filter --no-host --width

 Kernel: 5.13.19-2-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0 
 parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC 
 misobasedir=manjaro misolabel=MANJARO_KDEM_2115 quiet systemd.show_status=1 
 apparmor=1 security=apparmor driver=nonfree nouveau.modeset=0 i915.modeset=1 
 Desktop: KDE Plasma 5.22.5 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM 
 Distro: Manjaro Linux base: Arch Linux 
 Type: Laptop System: Dell product: G3 3579 v: N/A serial: <filter> Chassis: 
 type: 10 serial: <filter> 
 Mobo: Dell model: 0JYXHN v: A00 serial: <filter> UEFI: Dell v: 1.16.0 
 date: 06/04/2021 
 ID-1: BAT0 charge: 39.2 Wh (100.0%) condition: 39.2/56.0 Wh (70.1%) 
 volts: 16.7 min: 15.2 model: Samsung SDI DELL W7NKD97 type: Li-ion 
 serial: <filter> status: Full 
 RAM: total: 7.63 GiB used: 3.46 GiB (45.3%) 
 RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
 Info: Quad Core model: Intel Core i5-8300H bits: 64 type: MT MCP 
 arch: Kaby Lake note: check family: 6 model-id: 9E (158) stepping: A (10) 
 microcode: EA cache: L2: 8 MiB bogomips: 36812 
 Speed: 799 MHz min/max: 800/4000 MHz Core speeds (MHz): 1: 799 2: 800 3: 800 
 4: 800 5: 800 6: 800 7: 800 8: 800 
 Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon art 
 avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid 
 cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est 
 f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht hwp hwp_act_window 
 hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid invpcid_single lahf_lm lm 
 mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat 
 pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts 
 rdrand rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1 
 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust 
 tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt 
 xsaves xtopology xtpr 
 Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
 Type: l1tf 
 mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
 Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
 Type: meltdown mitigation: PTI 
 Type: spec_store_bypass 
 mitigation: Speculative Store Bypass disabled via prctl and seccomp 
 Type: spectre_v1 
 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
 Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, 
 IBRS_FW, STIBP: conditional, RSB filling 
 Type: srbds mitigation: Microcode 
 Type: tsx_async_abort status: Not affected 
 Device-1: Intel CoffeeLake-H GT2 [UHD Graphics 630] vendor: Dell 
 driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:3e9b class-ID: 0300 
 Device-2: NVIDIA GP107M [GeForce GTX 1050 Ti Mobile] vendor: Dell 
 driver: nvidia v: 470.63.01 alternate: nouveau,nvidia_drm bus-ID: 01:00.0 
 chip-ID: 10de:1c8c class-ID: 0302 
 Device-3: Sunplus Innovation Integrated_Webcam_HD type: USB driver: uvcvideo 
 bus-ID: 1-5:3 chip-ID: 1bcf:28c1 class-ID: 0e02 
 Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver: 
 loaded: modesetting,nvidia alternate: fbdev,nouveau,nv,vesa display-ID: :0 
 screens: 1 
 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
 s-diag: 582mm (22.9") 
 OpenGL: renderer: Mesa Intel UHD Graphics 630 (CFL GT2) v: 4.6 Mesa 21.2.3 
 direct render: Yes 
 Device-1: Intel Cannon Lake PCH cAVS vendor: Dell driver: snd_hda_intel 
 v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3 
 chip-ID: 8086:a348 class-ID: 0403 
 Device-2: NVIDIA GP107GL High Definition Audio driver: snd_hda_intel 
 v: kernel bus-ID: 01:00.1 chip-ID: 10de:0fb9 class-ID: 0403 
 Sound Server-1: ALSA v: k5.13.19-2-MANJARO running: yes 
 Sound Server-2: JACK v: 1.9.19 running: no 
 Sound Server-3: PulseAudio v: 15.0 running: yes 
 Sound Server-4: PipeWire v: 0.3.38 running: yes 
 Device-1: Intel Cannon Lake PCH CNVi WiFi driver: iwlwifi v: kernel 
 port: 5000 bus-ID: 00:14.3 chip-ID: 8086:a370 class-ID: 0280 
 IF: wlo1 state: up mac: <filter> 
 IP v4: <filter> type: dynamic noprefixroute scope: global 
 broadcast: <filter> 
 IP v6: <filter> type: noprefixroute scope: link 
 Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
 vendor: Dell driver: r8169 v: kernel port: 3000 bus-ID: 02:00.0 
 chip-ID: 10ec:8168 class-ID: 0200 
 IF: enp2s0 state: down mac: <filter> 
 WAN IP: <filter> 
 Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: USB 
 driver: btusb v: 0.8 bus-ID: 1-14:5 chip-ID: 8087:0aaa class-ID: e001 
 Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends 
 Message: No logical block device data found. 
 Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci 
 v: 3.0 port: 5060 bus-ID: 00:17.0 chip-ID: 8086.282a rev: 10 class-ID: 0104 
 Local Storage: total: 960.81 GiB used: 85.75 GiB (8.9%) 
 SMART Message: Unable to run smartctl. Root privileges required. 
 ID-1: /dev/sda maj-min: 8:0 vendor: Toshiba model: MQ04ABF100 
 size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s 
 type: HDD rpm: 5400 serial: <filter> rev: 0D scheme: GPT 
 ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Verbatim model: STORE N GO 
 size: 29.3 GiB block-size: physical: 512 B logical: 512 B type: N/A 
 serial: <filter> rev: 2.00 scheme: MBR 
 SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
 Message: No optical or floppy data found. 
 ID-1: /run/media/manjaro/Storage raw-size: 931.39 GiB 
 size: 931.39 GiB (100.00%) used: 85.75 GiB (9.2%) fs: ntfs dev: /dev/sda2 
 maj-min: 8:2 label: Storage uuid: 2CF087ABF0877A3A 
 Alert: No swap data was found. 
 ID-1: /dev/sda1 maj-min: 8:1 size: 128 MiB fs: <superuser required> 
 label: N/A uuid: N/A 
 ID-2: /dev/sdb1 maj-min: 8:17 size: 2.57 GiB fs: iso9660 
 ID-3: /dev/sdb2 maj-min: 8:18 size: 4 MiB fs: vfat label: MISO_EFI 
 uuid: B387-ACD3 
 Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 16 rev: 2.0 
 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
 Device-1: 1-2:2 info: Verbatim Flash Drive type: Mass Storage 
 driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 100mA 
 chip-ID: 18a5:0302 class-ID: 0806 serial: <filter> 
 Device-2: 1-5:3 info: Sunplus Innovation Integrated_Webcam_HD type: Video 
 driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA 
 chip-ID: 1bcf:28c1 class-ID: 0e02 
 Device-3: 1-6:4 info: Realtek RTS5129 Card Reader Controller 
 type: <vendor specific> driver: rtsx_usb,rtsx_usb_ms,rtsx_usb_sdmmc 
 interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 0bda:0129 
 class-ID: ff00 serial: <filter> 
 Device-4: 1-14:5 info: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) 
 type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s 
 power: 100mA chip-ID: 8087:0aaa class-ID: e001 
 Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 8 rev: 3.1 speed: 10 Gb/s 
 chip-ID: 1d6b:0003 class-ID: 0900 
 System Temperatures: cpu: 50.0 C mobo: N/A 
 Fan Speeds (RPM): N/A 
 Processes: 260 Uptime: 12m wakeups: 1 Init: systemd v: 249 tool: systemctl 
 Compilers: gcc: N/A Packages: pacman: 1070 lib: 296 Shell: Bash v: 5.1.8 
 running-in: konsole inxi: 3.3.06 

Any help will be appreciated, Thanks.

please search for solutions on how to load the vmd module