Hi, I bought a tp-link Mini Wireless N USB Adapter, I connect it to my PC, the PC recognizes it but when I enter the password it doesn’t connect to the WI-Fi network, of course I have already tried the password many times to be sure that it is correct, I haven’t found any solution on the internet about it, any help will be greatly appreciated, thank you very much.
I would like to provide any kind of log but I don’t know how to find it in this case.
UPDATE 1:
Using nmtui says that can’t find the network after I enter the password but I chose the network with the interface that told me it was available.
UPDATE 2:
ouput using nmcli:
Error: Connection Activation Failed: (53) WiFi network not found.
UPDATE 3:
inxi --admin --verbosity=7 --filter --width
Output
System:
Kernel: 5.15.21-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
root=UUID=d952ef9e-d67a-498a-b676-7db03b11ab4a rw quiet splash apparmor=1
security=apparmor udev.log_priority=3
Desktop: GNOME 41.3 tk: GTK 3.24.31 wm: gnome-shell dm: GDM 41.3
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: PRIME B550M-A v: Rev X.0x
serial: <superuser required> UEFI: American Megatrends v: 2423
date: 08/09/2021
Battery:
Message: No system battery data found. Is one present?
Memory:
RAM: total: 14.99 GiB used: 1.67 GiB (11.1%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: AMD Ryzen 7 5700G with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 3 family: 0x19 (25) model-id: 0x50 (80) stepping: 0
microcode: 0xA50000C
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB
L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 2127 high: 2999 min/max: 1400/4672 boost: enabled
scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 2125 2: 2400
3: 2326 4: 1399 5: 2208 6: 2327 7: 1581 8: 2400 9: 2999 10: 1629 11: 2083
12: 1563 13: 2399 14: 2399 15: 1797 16: 2400 bogomips: 121662
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists erms extapic
extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht
hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt
pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor
svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl
v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt
xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional,
IBRS_FW, STIBP: always-on, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Cezanne vendor: ASUSTeK driver: amdgpu v: kernel
bus-ID: 0b:00.0 chip-ID: 1002:1638 class-ID: 0300
Display: wayland server: X.org 1.21.1.3 compositor: gnome-shell driver:
loaded: amdgpu note: n/a (using device driver) - try sudo/root display-ID: 0
resolution: <missing: xdpyinfo>
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
Device-1: AMD Renoir Radeon High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus-ID: 0b:00.1 chip-ID: 1002:1637
class-ID: 0403
Device-2: AMD Family 17h HD Audio vendor: ASUSTeK PRIME B450M-A
driver: snd_hda_intel v: kernel bus-ID: 0b:00.6 chip-ID: 1022:15e3
class-ID: 0403
Sound Server-1: ALSA v: k5.15.21-1-MANJARO running: yes
Sound Server-2: JACK v: 1.9.20 running: no
Sound Server-3: PulseAudio v: 15.0 running: yes
Sound Server-4: PipeWire v: 0.3.45 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK PRIME B450M-A driver: r8169 v: kernel port: f000
bus-ID: 09:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp9s0 state: down mac: <filter>
Device-2: TP-Link TL-WN823N v2/v3 [Realtek RTL8192EU] type: USB
driver: rtl8xxxu bus-ID: 5-1:2 chip-ID: 2357:0109 class-ID: 0000
serial: <filter>
IF: wlp11s0f4u1 state: down mac: <filter>
IF-ID-1: enp1s0f0u10 state: unknown speed: -1 duplex: half mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Xiaomi Mi/Redmi series (RNDIS + ADB) type: USB driver: rndis_host
v: kernel bus-ID: 1-10:6 chip-ID: 2717:ff88 class-ID: 0a00 serial: <filter>
Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 476.94 GiB used: 18.57 GiB (3.9%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Intel model: SSDPEKNU512GZ
size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 type: SSD serial: <filter> rev: 002C temp: 27.9 C scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 476.64 GiB size: 468.09 GiB (98.21%)
used: 18.57 GiB (4.0%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2
label: N/A uuid: d952ef9e-d67a-498a-b676-7db03b11ab4a
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 288 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
label: NO_LABEL uuid: 7D4B-78BD
Swap:
Alert: No swap data was found.
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 10 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-6:2 info: ASUSTek AURA LED Controller type: HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 16mA
chip-ID: 0b05:1939 class-ID: 0300 serial: <filter>
Device-2: 1-10:6 info: Xiaomi Mi/Redmi series (RNDIS + ADB)
type: Bluetooth,CDC-Data driver: rndis_host interfaces: 3 rev: 2.0
speed: 480 Mb/s power: 500mA chip-ID: 2717:ff88 class-ID: 0a00
serial: <filter>
Hub-2: 2-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-1:2 info: Chicony wired mouse type: Mouse
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s
power: 100mA chip-ID: 04f2:0718 class-ID: 0301
Device-2: 3-2:3 info: Microsoft Wireless Optical Desktop 3.0
type: Keyboard,HID driver: microsoft,usbhid interfaces: 2 rev: 2.0
speed: 1.5 Mb/s power: 100mA chip-ID: 045e:009d class-ID: 0300
Hub-4: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-5: 5-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 5-1:2 info: TP-Link TL-WN823N v2/v3 [Realtek RTL8192EU]
type: Network driver: rtl8xxxu interfaces: 1 rev: 2.1 speed: 480 Mb/s
power: 500mA chip-ID: 2357:0109 class-ID: 0000 serial: <filter>
Hub-6: 6-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: N/A mobo: N/A gpu: amdgpu temp: 34.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 345 Uptime: 8m wakeups: 0 Init: systemd v: 250 tool: systemctl
Compilers: gcc: 11.1.0 Packages: 1158 pacman: 1153 lib: 306 flatpak: 5
Shell: Zsh v: 5.8 running-in: gnome-terminal inxi: 3.3.12
UPDATE 4:
I tried the stick with the live ISO and I have same result and I tried with a Lubuntu live ISO I have around and again same result but in Lubuntu says it connect and disconnect quickly after