"The current theme cannot be loaded due to the errors below"

Support KDE Plasma
,
2

Hi @happy_m, and welcome!

That list does not seem to be from an updated installation, so it seems either:

  1. That list is from an older ISO; or
  2. it is from your installation which is unupdated.

And, AFAIK this command:

…should not list anything to do with:

Mine doesn’t:

$ pacman -Qm | grep bal

So it’s quite obvious to me that something’s messed-up there…

So I’d suggest the following:

  1. Download, dd/etcher/whatever a new ISO to a thumb drive and boot with that.
  2. Enter a chroot environment from there.
  3. Sync the whole system COMPLETELY

How to chroot

  1. Ensure you’ve got a relatively new ISO or at least one with a still supported LTS kernel.

  2. Write/copy/dd the ISO to a USB thumb drive.

  3. When done, boot with the above mentioned USB thumb drive into the live environment.

  4. Once booted, open a terminal and enter the following command to enter the chroot environment:

manjaro-chroot -a
  1. If you have more than one Linux installation, select the correct one to use from the list provided.

When done, you should now be in the chroot environment.

But, be careful, as you’re now in an actual root environment on your computer, so any changes you make will persist after a restart.

Once you’ve chrooted successfully, run the following to re-sync the complete system:

pamac upgrade --no-aur

Reboot and see what happens. We’re not done if everything works, though, But test, and provide any and all errors you might get.

2 Likes
3

This command lists “foreign” packages - often explicitely installed using pacman -U packagename

These packages are all old -
some just old and could be updated with regular repo packages, some must have come from AUR (google-chrome and brave-bin, for example) - perhaps even all of them.

You could try pacman -Syuu
and see whether some will be updated.

I have no idea how to rectify the mess except to first tend to any .pacnew files which you might have
and then perhaps to try to update one by one
after you have removed everything that came from AUR.

Only you know what you did - everything is recorded in /var/log/pacman.log so you can look there to refresh your memory.

1 Like
4

It lists packages not found in sync databases. So AUR or anything else manually built or anything that was removed from sync dbs. OP clearly has unmaintained system, so have fun fixing it in the next 100 posts. :stuck_out_tongue:

2 Likes
5

Hi @happy_m and welcome to the Manjaro community.

Firstly, we have no idea what your issue is, apart from your inability to perform an update. You will need to provide useful information so that others might be able to help; nobody here is a mind-reader.

For example, what is the output resulting from your attempts to update? Effectively saying “it’s not working” doesn’t tell us anything. Exactly what have you done (provide the commands) and what output do you see? (errors, warnings, etc).

Please also note that this is the command to perform a Manjaro update:

sudo pacman -Syu

Notice in particular, there is only one y in that command. One y is the correct usage, despite the amount of forum members using two, and claiming otherwise. pacman-mirrors --fasttrack 5 is always a good addition.

A little housekeeping…

As a new user, please take some time to familiarise yourself with Forum requirements; in particular, the many ways to use the forum to your benefit. To that end, some or all these links will be invaluable:

And last, but not least, the Stable Update Announcements, which you should check frequently for important update related information. Occasionally an issue might be directly related to a particular update; it’s always best to check those announcements.

I hope this helps. Cheers.

3 Likes
6

Hello guys,
thank you all for your responses and forgive me for my incorrect explanation of the question.

I am not a very confident Linux user and have some difficulties in understanding specific technical terms.

However,
Firstly i tried to do a full update of my system, which was working fine before that time.

Updating did not complete successfully due to some problematic dependencies.

Then i rebooted the system, and received an error screen with the text from the topic title and the inability to log into my system.

Then, while reading the Manjaro forum I realized that the problem was in the updating KDE shell. And i tried to solve the problem from other similar forum topics, from where used the commands that I quoted in my first message.

For now, I’m trying to figure it out and do what you kindly shared here, despite my mistakes in post.

1 Like
7

Let’s try to address what you have done so far:

Here, you should have taken care of the problematic dependencies, and asked for help if needed while giving the exact command you entered and the output resulting from that command. Good so far?

The error screen as you call it said “The current theme cannot be loaded due to the errors below” - that told us nothing - What errors were they?

Throwing commands randomly found in forum threads, when you don’t really know what they do, is a recipe for disaster.

I’m guessing that you somehow managed to leave yourself in a partial update state. There are many similar threads on that topic, and all of them different, with varying solutions. It might even be easier to install Manjaro from scratch; but that’s up to you to decide.

You do not appear to have read any of the links previously posted for you. I suggest you do that before going much further (a :heart: does not show that you actually read anything). Here are some more:

If these guides and tutorials are too much, you might also consider:

I hope this helps. Cheers.

1 Like
8

I repeated the steps that you described here.

Looking through the messages in the console, I was convinced that a large number of system files were being updated and reinstalled.
And in the end, the update was successful and without errors.

However, after rebooting the operating system does not start.
On the black start screen I only see the line: ‘/dev/nvme0n1p2: clean, …/…files, …/…blocks’

9

Thank you for your hint about the place where I can look at the logs.

Early I tried to update this system from time to time, but the update failed every time and aborted the operation.

Here is the log from the moment I started trying to fix the system update:

......
[2024-02-18T15:25:29+0200] [PACKAGEKIT] synchronizing package lists
[2024-02-19T14:17:21+0200] [PACKAGEKIT] synchronizing package lists
[2024-02-20T05:48:59+0200] [PACMAN] Running 'pacman -Syu'
[2024-02-20T05:48:59+0200] [PACMAN] synchronizing package lists
[2024-02-20T05:49:12+0200] [ALPM] running '00-timeshift-autosnap.hook'...
[2024-02-20T05:49:12+0200] [ALPM-SCRIPTLET] ==> skipping timeshift-autosnap due skipRsyncAutosnap in /etc/timeshift-autosnap.conf set to TRUE.
[2024-02-20T05:49:12+0200] [ALPM] running '05-snap-pac-pre.hook'...
[2024-02-20T05:49:12+0200] [ALPM] transaction started
[2024-02-20T05:49:12+0200] [ALPM] upgraded archlinux-keyring (20230821-1 -> 20231222-1)
[2024-02-20T05:49:12+0200] [ALPM-SCRIPTLET] ==> Adding keys from a file 'archlinux.gpg'...
[2024-02-20T05:49:15+0200] [ALPM-SCRIPTLET] ==> Local signing of trusted keys in a keychain...
[2024-02-20T05:49:15+0200] [ALPM-SCRIPTLET]   -> Locally signed 1 keys.
[2024-02-20T05:49:15+0200] [ALPM-SCRIPTLET] ==> Importing owner trust values...
[2024-02-20T05:49:15+0200] [ALPM-SCRIPTLET] gpg: inserting ownertrust of 4
[2024-02-20T05:49:15+0200] [ALPM-SCRIPTLET] ==> Blocking revoked keys...
[2024-02-20T05:49:15+0200] [ALPM-SCRIPTLET]   -> Disabled 8 keys.
[2024-02-20T05:49:15+0200] [ALPM-SCRIPTLET] ==> Updating the trust table...
[2024-02-20T05:49:16+0200] [ALPM-SCRIPTLET] gpg: marginals needed: 3  completes needed: 1  trust model: pgp
[2024-02-20T05:49:16+0200] [ALPM-SCRIPTLET] gpg: depth: 0  reliable:   1  signed:  24  trust: 0-, 0q, 0n, 0m, 0f, 1u
[2024-02-20T05:49:16+0200] [ALPM-SCRIPTLET] gpg: depth: 1  reliable:  24  signed: 101  trust: 0-, 0q, 0n, 24m, 0f, 0u
[2024-02-20T05:49:16+0200] [ALPM-SCRIPTLET] gpg: depth: 2  reliable:  74  signed:  29  trust: 74-, 0q, 0n, 0m, 0f, 0u
[2024-02-20T05:49:16+0200] [ALPM-SCRIPTLET] gpg: due date for next trust table check 2024-04-10
[2024-02-20T05:49:16+0200] [ALPM] transaction completed
[2024-02-20T05:49:16+0200] [ALPM] running '30-systemd-daemon-reload.hook'...
[2024-02-20T05:49:16+0200] [ALPM] running '30-systemd-update.hook'...
[2024-02-20T05:49:16+0200] [ALPM] running '90-packagekit-refresh.hook'...
[2024-02-20T05:49:16+0200] [ALPM] running 'zz-snap-pac-post.hook'...
[2024-02-20T05:49:16+0200] [PACMAN] starting full system upgrade
[2024-02-20T05:51:54+0200] [PAMAC] synchronizing package lists
[2024-02-20T05:54:33+0200] [PACKAGEKIT] synchronizing package lists
[2024-02-20T13:34:00+0200] [PACKAGEKIT] synchronizing package lists
.......
[2024-03-04T13:56:17+0200] [PACKAGEKIT] synchronizing package lists
[2024-03-04T17:59:10+0200] [PACKAGEKIT] synchronizing package lists
[2024-03-04T18:07:50+0200] [PACMAN] Running 'pacman -S snapd'
[2024-03-04T18:08:06+0200] [ALPM] running '00-timeshift-autosnap.hook'...
[2024-03-04T18:08:06+0200] [ALPM-SCRIPTLET] ==> skipping timeshift-autosnap due skipRsyncAutosnap in /etc/timeshift-autosnap.conf set to TRUE.
[2024-03-04T18:08:06+0200] [ALPM] running '05-snap-pac-pre.hook'...
[2024-03-04T18:08:06+0200] [ALPM] transaction started
[2024-03-04T18:08:06+0200] [ALPM] upgraded snapd (2.60.2-1 -> 2.61.1-1)
[2024-03-04T18:08:06+0200] [ALPM] transaction completed
[2024-03-04T18:08:06+0200] [ALPM] running '30-systemd-daemon-reload.hook'...
[2024-03-04T18:08:07+0200] [ALPM] running '30-systemd-tmpfiles.hook'...
[2024-03-04T18:08:07+0200] [ALPM] running '30-systemd-update.hook'...
[2024-03-04T18:08:07+0200] [ALPM] running '90-packagekit-refresh.hook'...
[2024-03-04T18:08:07+0200] [ALPM] running 'dbus-reload.hook'...
[2024-03-04T18:08:07+0200] [ALPM] running 'update-desktop-database.hook'...
[2024-03-04T18:08:07+0200] [ALPM] running 'zz-snap-pac-post.hook'...
[2024-03-04T18:12:08+0200] [ALPM] running '05-snap-pac-pre.hook'...
[2024-03-04T18:12:08+0200] [ALPM] transaction started
[2024-03-04T18:12:08+0200] [ALPM] removed telegram-desktop (4.9.3-1)
[2024-03-04T18:12:08+0200] [ALPM] transaction completed
[2024-03-04T18:12:08+0200] [ALPM] running '30-systemd-update.hook'...
[2024-03-04T18:12:08+0200] [ALPM] running '90-packagekit-refresh.hook'...

could this be useful information for a solution, or do I need to provide more logs, or should I be looking for something specific?

10

Possibly.

There are plenty more hints if you follow the links previously given.

Thanks for attempting to make your output more readable, however, you used the wrong character as a backtick. The key you need is usually found under the Esc key (on a normal US keyboard) - it looks like `. Notice it’s slanted backwards. Edit that post appropriately to have it display in a neat, tidy, scrollable text box.

Additionally, the outputs of:

inxi --admin --verbosity=8 --filter --no-host --width

and

journalctl --boot=-1 --priority=3 --catalog --no-pager

may also be useful - these too were in the links previously given; possibly in the very first one.

Cheers.

2 Likes
11
please format terminal output like this: 
[2024-02-18T15:25:29+0200] [PACKAGEKIT] synchronizing package lists
[2024-02-19T14:17:21+0200] [PACKAGEKIT] synchronizing package lists
[2024-02-20T05:48:59+0200] [PACMAN] Running ‘pacman -Syu’
[2024-02-20T05:48:59+0200] [PACMAN] synchronizing package lists
[2024-02-20T05:49:12+0200] [ALPM] running ‘00-timeshift-autosnap.hook’…
[2024-02-20T05:49:12+0200] [ALPM-SCRIPTLET] ==> skipping timeshift-autosnap due skipRsyncAutosnap in /etc/timeshift-autosnap.conf set to TRUE.
[2024-02-20T05:49:12+0200] [ALPM] running ‘05-snap-pac-pre.hook’…
[2024-02-20T05:49:12+0200] [ALPM] transaction started
[2024-02-20T05:49:12+0200] [ALPM] upgraded archlinux-keyring (20230821-1 → 20231222-1)
[2024-02-20T05:49:12+0200] [ALPM-SCRIPTLET] ==> Adding keys from a file ‘archlinux.gpg’…
[2024-02-20T05:49:15+0200] [ALPM-SCRIPTLET] ==> Local signing of trusted keys in a keychain…
[2024-02-20T05:49:15+0200] [ALPM-SCRIPTLET] → Locally signed 1 keys.
[2024-02-20T05:49:15+0200] [ALPM-SCRIPTLET] ==> Importing owner trust values…
[2024-02-20T05:49:15+0200] [ALPM-SCRIPTLET] gpg: inserting ownertrust of 4
[2024-02-20T05:49:15+0200] [ALPM-SCRIPTLET] ==> Blocking revoked keys…
[2024-02-20T05:49:15+0200] [ALPM-SCRIPTLET] → Disabled 8 keys.
[2024-02-20T05:49:15+0200] [ALPM-SCRIPTLET] ==> Updating the trust table…
[2024-02-20T05:49:16+0200] [ALPM-SCRIPTLET] gpg: marginals needed: 3 completes needed: 1 trust model: pgp
[2024-02-20T05:49:16+0200] [ALPM-SCRIPTLET] gpg: depth: 0 reliable: 1 signed: 24 trust: 0-, 0q, 0n, 0m, 0f, 1u
[2024-02-20T05:49:16+0200] [ALPM-SCRIPTLET] gpg: depth: 1 reliable: 24 signed: 101 trust: 0-, 0q, 0n, 24m, 0f, 0u
[2024-02-20T05:49:16+0200] [ALPM-SCRIPTLET] gpg: depth: 2 reliable: 74 signed: 29 trust: 74-, 0q, 0n, 0m, 0f, 0u
[2024-02-20T05:49:16+0200] [ALPM-SCRIPTLET] gpg: due date for next trust table check 2024-04-10
[2024-02-20T05:49:16+0200] [ALPM] transaction completed
[2024-02-20T05:49:16+0200] [ALPM] running ‘30-systemd-daemon-reload.hook’…
[2024-02-20T05:49:16+0200] [ALPM] running ‘30-systemd-update.hook’…
[2024-02-20T05:49:16+0200] [ALPM] running ‘90-packagekit-refresh.hook’…
[2024-02-20T05:49:16+0200] [ALPM] running ‘zz-snap-pac-post.hook’…
[2024-02-20T05:49:16+0200] [PACMAN] starting full system upgrade
[2024-02-20T05:51:54+0200] [PAMAC] synchronizing package lists
[2024-02-20T05:54:33+0200] [PACKAGEKIT] synchronizing package lists
[2024-02-20T13:34:00+0200] [PACKAGEKIT] synchronizing package lists
…
[2024-03-04T13:56:17+0200] [PACKAGEKIT] synchronizing package lists
[2024-03-04T17:59:10+0200] [PACKAGEKIT] synchronizing package lists
[2024-03-04T18:07:50+0200] [PACMAN] Running ‘pacman -S snapd’
[2024-03-04T18:08:06+0200] [ALPM] running ‘00-timeshift-autosnap.hook’…
[2024-03-04T18:08:06+0200] [ALPM-SCRIPTLET] ==> skipping timeshift-autosnap due skipRsyncAutosnap in /etc/timeshift-autosnap.conf set to TRUE.
[2024-03-04T18:08:06+0200] [ALPM] running ‘05-snap-pac-pre.hook’…
[2024-03-04T18:08:06+0200] [ALPM] transaction started
[2024-03-04T18:08:06+0200] [ALPM] upgraded snapd (2.60.2-1 → 2.61.1-1)
[2024-03-04T18:08:06+0200] [ALPM] transaction completed
[2024-03-04T18:08:06+0200] [ALPM] running ‘30-systemd-daemon-reload.hook’…
[2024-03-04T18:08:07+0200] [ALPM] running ‘30-systemd-tmpfiles.hook’…
[2024-03-04T18:08:07+0200] [ALPM] running ‘30-systemd-update.hook’…
[2024-03-04T18:08:07+0200] [ALPM] running ‘90-packagekit-refresh.hook’…
[2024-03-04T18:08:07+0200] [ALPM] running ‘dbus-reload.hook’…
[2024-03-04T18:08:07+0200] [ALPM] running ‘update-desktop-database.hook’…
[2024-03-04T18:08:07+0200] [ALPM] running ‘zz-snap-pac-post.hook’…
[2024-03-04T18:12:08+0200] [ALPM] running ‘05-snap-pac-pre.hook’…
[2024-03-04T18:12:08+0200] [ALPM] transaction started
[2024-03-04T18:12:08+0200] [ALPM] removed telegram-desktop (4.9.3-1)
[2024-03-04T18:12:08+0200] [ALPM] transaction completed
[2024-03-04T18:12:08+0200] [ALPM] running ‘30-systemd-update.hook’…
[2024-03-04T18:12:08+0200] [ALPM] running ‘90-packagekit-refresh.hook’…

click the line or the arrow

in between three backticks ``` at the beginning and at the end
or use the symbol </> in the edit window

Provide the command you run and all it’s output so we can see what you try to do and why it doesn’t work.

3 Likes
12

Do this outputs working correctly from live-boot after chrooting?

Since he said, he can’t boot regulary. The output commands are normaly working when the install or at least the TTY is working with the default install or not?

13

As he said - it’s from inside chroot - which is as good as if the system itself was booted.

1 Like
14

There is also something else more fundamentally wrong because many of these ‘foreign’ packages should not be foreign. kio for example is in the repos.

You might want to sort your mirrors

sudo pacman-mirrors -f && sudo pacman -Syu

packagekit should not be used by anyone.

Also heres a thing for if you need TTY or chroot etc.

1 Like
15

I’m very sorry, but I can’t provide any command, because i tried to run the system update in graphical mode by clicking on the buttons in the Manjaro System Update window.
As I understand from reading the forum and this topic, I had a partial update.

And after that partial update on start i recieved screen like this:
https://forums.opensuse.org/uploads/default/original/2X/d/d37b67e8de68bb0aece49bd524d7761022d039d9.jpeg

Please note, this is not my screenshot. I just had the same visual appearance.

16

yes, moment of chrooting looks like this:

    ~  manjaro-chroot -a                                                                                                                            ✔ 
grub-probe: error: cannot find a GRUB drive for /dev/sdb1.  Check your device.map.
grub-probe: error: cannot find a GRUB drive for /dev/sdb1.  Check your device.map.
==> Mounting (ManjaroLinux) [/dev/nvme0n1p2]
 --> mount: [/mnt]
 --> mount: [/mnt/boot/efi]
[manjaro /]#
17

Now I’m totally lost at understanding what you are doing.

You said:

So:
you are not booting your system, but a live system instead
and then using chroot to get into your actual system

… where you then have problems with updating it

The GUI you see in this case is that of the live system.
And you use a terminal to perform the chroot.

From then on you interact via that terminal with your actual system.
The GUI of the live system is, at that time, totally inconsequential.
You work on your system from that terminal only.

I’m at a total loss at following what you are actually doing and where.

1 Like
18

@Nachlese just confirmed that you can provide commands, since you can post your journal and inxi after you doing a chroot command from your Live Boot.

19

here is first output:,

[manjaro /]# inxi --admin --verbosity=8 --filter --no-host --width
12System:
  12Kernel 6.6.25-1-MANJARO 12arch x86_64 12bits 64 12compiler gcc 12v 13.2.1
    12clocksource hpet 12avail acpi_pm 12parameters BOOT_IMAGE=/boot/vmlinuz-x86_64
    lang=en_US keytable=us tz=UTC misobasedir=manjaro
    misolabel=MANJARO_KDE_2314 quiet systemd.show_status=1 splash
    driver=nonfree nouveau.modeset=0 i915.modeset=1 radeon.modeset=1
  12Desktop KDE Plasma 12v ERR-101 12tk Qt 12v N/A 12wm kwin_x11 12dm N/A 12Distro Manjaro
    12base Arch Linux
12Machine:
  12Type Laptop 12System ASUSTeK 12product ROG Zephyrus G14 GA401QM_GA401QM 12v 1.0
    12serial <filter>
  12Mobo ASUSTeK 12model GA401QM 12v 1.0 12serial <filter>
    12uuid 01f8ff9d-3da4-354a-b91f-4a0f63145f24 12UEFI American Megatrends LLC.
    12v GA401QM.415 12date 08/11/2023
12Battery:
  12ID-1 BAT0 12charge 62.3 Wh (100.0%) 12condition 62.3/76.0 Wh (82.0%) 12volts 15.8
    12min 15.8 12model ASUSTeK ASUS Battery 12type Li-ion 12serial N/A
    12status not charging
12Memory:
  12System RAM 12total 16 GiB 12available 15.03 GiB 12used 4.16 GiB (27.7%)
  12Array-1 12capacity 32 GiB 12slots 2 12modules 1 12EC None 12max-module-size 16 GiB
    12note est.
  12Device-1 Channel-A DIMM 0 12type DDR4 12detail synchronous unbuffered
    (unregistered) 12size 16 GiB 12speed 3200 MT/s 12volts 12curr 1.2 12min 1.2 12max 1.2
    12width (bits) 12data 64 12total 64 12manufacturer Samsung 12part-no M471A2G44AM0-CWE
    12serial N/A
  12Device-2 Channel-B DIMM 0 12type no module installed
12PCI Slots:
  12Message No PCI Slot data found.
12CPU:
  12Info 12model AMD Ryzen 7 5800HS with Radeon Graphics 12socket FP6 12bits 64
    12type MT MCP 12arch Zen 3 12gen 4 12level v3 12note check 12built 2021-22
    12process TSMC n7 (7nm) 12family 0x19 (25) 12model-id 0x50 (80) 12stepping 0
    12microcode 0xA50000C
  12Topology 12cpus 1x 12cores 8 12tpc 2 12threads 16 12smt enabled 12cache 12L1 512 KiB
    12desc d-8x32 KiB; i-8x32 KiB 12L2 4 MiB 12desc 8x512 KiB 12L3 16 MiB 12desc 1x16 MiB
  12Speed (MHz) 12avg 462 12high 1397 12min/max 400/4463 12base/boost 3200/4450 12scaling
    12driver amd-pstate-epp 12governor powersave 12volts 1.2 V 12ext-clock 100 MHz 12cores
    121 400 122 400 123 400 124 400 125 400 126 400 127 400 128 400 129 400 1210 400 1211 400 1212 1397
    1213 400 1214 400 1215 400 1216 400 12bogomips 102249
  12Flags 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
    bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
    constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
    cqm_occup_llc cr8_legacy cx16 cx8 de debug_swap decodeassists erms extapic
    extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht
    hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
    misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
    nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
    pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt
    pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
    skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor
    svm svm_lock syscall tce topoext tsc tsc_scale umip user_shstk v_spec_ctrl
    v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt
    xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
  12Vulnerabilities
  12Type gather_data_sampling 12status Not affected
  12Type itlb_multihit 12status Not affected
  12Type l1tf 12status Not affected
  12Type mds 12status Not affected
  12Type meltdown 12status Not affected
  12Type mmio_stale_data 12status Not affected
  12Type reg_file_data_sampling 12status Not affected
  12Type retbleed 12status Not affected
  12Type spec_rstack_overflow 12status Vulnerable: Safe RET, no microcode
  12Type spec_store_bypass 12mitigation Speculative Store Bypass disabled via
    prctl
  12Type spectre_v1 12mitigation usercopy/swapgs barriers and __user pointer
    sanitization
  12Type spectre_v2 12mitigation Retpolines, IBPB: conditional, IBRS_FW, STIBP:
    always-on, RSB filling, PBRSB-eIBRS: Not affected
  12Type srbds 12status Not affected
  12Type tsx_async_abort 12status Not affected
12Graphics:
  12Device-1 NVIDIA GA106M [GeForce RTX 3060 Mobile / Max-Q] 12vendor ASUSTeK
    12driver nvidia 12v 550.67 12non-free 550.xx+ 12status current (as of 2024-04;
    EOL~2026-12-xx) 12arch Ampere 12code GAxxx 12process TSMC n7 (7nm)
    12built 2020-2023 12pcie 12gen 3 12speed 8 GT/s 12lanes 8 12link-max 12gen 4
    12speed 16 GT/s 12lanes 16 12bus-ID 01:00.0 12chip-ID 10de:2520 12class-ID 0300
  12Device-2 AMD Cezanne [Radeon Vega Series / Radeon Mobile Series]
    12vendor ASUSTeK 12driver amdgpu 12v kernel 12arch GCN-5 12code Vega 12process GF 14nm
    12built 2017-20 12pcie 12gen 3 12speed 8 GT/s 12lanes 16 12link-max 12gen 4 12speed 16 GT/s
    12ports 12active eDP-1 12empty HDMI-A-1 12bus-ID 04:00.0 12chip-ID 1002:1638
    12class-ID 0300 12temp 37.0 C
  12Display 12server X.org 12v 1.21.1.12 12compositor kwin_x11 12driver 12X 12loaded radeon
    12unloaded modesetting 12alternate fbdev,vesa 12gpu amdgpu 12display-ID :0
  12Monitor-1 eDP-1 12model TL140BDXP01-0 12built 2020 12res 2560x1440 12dpi 210
    12gamma 1.2 12chroma 12red 12x 0.682 12y 0.322 12green 12x 0.263 12y 0.690 12blue 12x 0.149
    12y 0.059 12white 12x 0.314 12y 0.329 12size 310x174mm (12.2x6.85") 12diag 355mm (14")
    12ratio 16:9 12modes 2560x1440, 1920x1200, 1920x1080, 1600x1200, 1680x1050,
    1280x1024, 1440x900, 1280x800, 1280x720, 1024x768, 800x600, 640x480
  12API EGL 12v 1.5 12hw 12drv amd radeonsi 12platforms 12device 0 12drv radeonsi 12device 2
    12drv swrast 12gbm 12drv kms_swrast 12surfaceless 12drv radeonsi
    12inactive wayland,x11,device-1
  12API OpenGL 12v 4.6 12compat-v 4.5 12vendor mesa 12v 24.0.2-manjaro1.1
    12note incomplete (EGL sourced) 12renderer llvmpipe (LLVM 16.0.6 256 bits), AMD
    Radeon Graphics (radeonsi renoir LLVM 16.0.6 DRM 3.54 6.6.25-1-MANJARO)
  12API Vulkan 12Message No Vulkan data available.
12Audio:
  12Device-1 NVIDIA GA106 High Definition Audio 12vendor ASUSTeK
    12driver snd_hda_intel 12v kernel 12pcie 12gen 3 12speed 8 GT/s 12lanes 8 12link-max 12gen 4
    12speed 16 GT/s 12lanes 16 12bus-ID 01:00.1 12chip-ID 10de:228e 12class-ID 0403
  12Device-2 AMD Renoir Radeon High Definition Audio 12driver snd_hda_intel
    12v kernel 12pcie 12gen 3 12speed 8 GT/s 12lanes 16 12link-max 12gen 4 12speed 16 GT/s
    12bus-ID 04:00.1 12chip-ID 1002:1637 12class-ID 0403
  12Device-3 AMD ACP/ACP3X/ACP6x Audio Coprocessor 12vendor ASUSTeK 12driver N/A
    12pcie 12gen 3 12speed 8 GT/s 12lanes 16 12link-max 12gen 4 12speed 16 GT/s 12bus-ID 04:00.5
    12chip-ID 1022:15e2 12class-ID 0480
  12Device-4 AMD Family 17h/19h HD Audio 12vendor ASUSTeK 12driver snd_hda_intel
    12v kernel 12pcie 12gen 3 12speed 8 GT/s 12lanes 16 12link-max 12gen 4 12speed 16 GT/s
    12bus-ID 04:00.6 12chip-ID 1022:15e3 12class-ID 0403
  12API ALSA 12v k6.6.25-1-MANJARO 12status kernel-api 12with aoss 12type oss-emulator
    12tools alsactl,alsamixer,amixer
  12Server-1 JACK 12v 1.9.22 12status off 12tools N/A
  12Server-2 PipeWire 12v 1.0.3 12status n/a (root, process)
    12with pipewire-media-session 12status off 12tools pw-cli
  12Server-3 PulseAudio 12v 17.0 12status off 12with pulseaudio-alsa 12type plugin
    12tools pacat,pactl
12Network:
  12Device-1 MEDIATEK MT7921 802.11ax PCI Express Wireless Network Adapter
    12vendor AzureWave 12driver mt7921e 12v kernel 12pcie 12gen 2 12speed 5 GT/s 12lanes 1
    12bus-ID 02:00.0 12chip-ID 14c3:7961 12class-ID 0280
  12IF wlp2s0 12state up 12mac <filter>
  12IP v4 <filter> 12type dynamic noprefixroute 12scope global 12broadcast <filter>
  12IP v6 <filter> 12type noprefixroute 12scope link
  12Device-2 Realtek RTL8153 Gigabit Ethernet Adapter 12driver r8152 12type USB
    12rev 3.0 12speed 5 Gb/s 12lanes 1 12mode 3.2 gen-1x1 12bus-ID 4-2.3:3
    12chip-ID 0bda:8153 12class-ID 0000 12serial <filter>
  12IF enp4s0f4u2u3 12state down 12mac <filter>
  12Info 12services NetworkManager,wpa_supplicant
  12WAN IP <filter>
12Bluetooth:
  12Device-1 IMC Networks Wireless_Device 12driver btusb 12v 0.8 12type USB 12rev 2.1
    12speed 480 Mb/s 12lanes 1 12mode 2.0 12bus-ID 3-4:4 12chip-ID 13d3:3563 12class-ID e001
    12serial <filter>
  12Report btmgmt 12ID hci0 12rfk-id 0 12state up 12address <filter> 12bt-v 5.2 12lmp-v 11
    12status 12discoverable no 12pairing no 12class-ID 6c010c
12Logical:
  12Message No logical block device data found.
12RAID:
  12Message No RAID data found.
12Drives:
  12Local Storage 12total 1.38 TiB 12used 76.53 GiB (5.4%)
  12ID-1 /dev/nvme0n1 12maj-min 259:0 12vendor Intel 12model SSDPEKNU512GZ
    12size 476.94 GiB 12block-size 12physical 512 B 12logical 512 B 12speed 31.6 Gb/s
    12lanes 4 12tech SSD 12serial <filter> 12fw-rev 002C 12temp 28.9 C
  12SMART yes 12health PASSED 12on 364d 4h 12cycles 9,862
    12read-units 24,161,640 [12.3 TB] 12written-units 22,065,084 [11.2 TB]
  12ID-2 /dev/sda 12maj-min 8:0 12vendor Toshiba 12model MQ04UBF100 12family 2.5" HDD
    MQ04UBF... (USB 3.0) 12size 931.51 GiB 12block-size 12physical 4096 B
    12logical 512 B 12type USB 12rev 3.0 12spd 5 Gb/s 12lanes 1 12mode 3.2 gen-1x1 12sata 3.3
    12speed 3.0 Gb/s 12tech HDD 12rpm 5400 12serial <filter> 12fw-rev 5438
    12drive-rev JU0B0U
  12SMART yes 12state disabled
  12ID-3 /dev/sdb 12maj-min 8:16 12vendor Kingston 12model DataTraveler 3.0
    12size 7.22 GiB 12block-size 12physical 512 B 12logical 512 B 12type USB 12rev 3.0
    12spd 5 Gb/s 12lanes 1 12mode 3.2 gen-1x1 12tech N/A 12serial <filter> 12fw-rev PMAP
  12SMART Message Unknown USB bridge. Flash drive/Unsupported enclosure?
  12Message No optical or floppy data found.
12Partition:
  12ID-1 / 12raw-size 100.2 GiB 12size 98.32 GiB (98.13%) 12used 76.48 GiB (77.8%)
    12fs ext4 12block-size 4096 B 12dev /dev/nvme0n1p2 12maj-min 259:2 12label N/A
    12uuid 56dc8a8e-3372-43b2-bd71-5544c9fdb413
  12ID-2 /boot/efi 12raw-size 286 MiB 12size 285.4 MiB (99.80%)
    12used 47.3 MiB (16.6%) 12fs vfat 12block-size 512 B 12dev /dev/nvme0n1p1
    12maj-min 259:1 12label N/A 12uuid F3A6-0949
12Swap:
  12Alert No swap data was found.
12Unmounted:
  12ID-1 /dev/nvme0n1p3 12maj-min 259:3 12size 16 MiB 12fs N/A 12label N/A 12uuid N/A
  12ID-2 /dev/nvme0n1p4 12maj-min 259:4 12size 76.17 GiB 12fs ntfs 12label N/A
    12uuid 6406113406110926
  12ID-3 /dev/nvme0n1p5 12maj-min 259:5 12size 300.28 GiB 12fs ntfs
    12label \x27\x27\x27\x27\x27\x27\x27\x27DATA 12uuid 44D26625218679D9
  12ID-4 /dev/sda1 12maj-min 8:1 12size 931.51 GiB 12fs ntfs 12label EXTERNAL_USB
    12uuid 8A3C5CB93C5CA1CD
  12ID-5 /dev/sdb1 12maj-min 8:17 12size 3.57 GiB 12fs N/A 12label N/A 12uuid N/A
  12ID-6 /dev/sdb2 12maj-min 8:18 12size 4 MiB 12fs N/A 12label MISO_EFI 12uuid C99C-5B91
12USB:
  12Hub-1 1-0:1 12info hi-speed hub with single TT 12ports 4 12rev 2.0
    12speed 480 Mb/s (57.2 MiB/s) 12lanes 1 12mode 2.0 12chip-ID 1d6b:0002 12class-ID 0900
  12Device-1 1-1:2 12info Holtek USB Gaming Mouse 12type mouse,keyboard,HID
    12driver hid-generic,usbhid 12interfaces 3 12rev 2.0 12speed 12 Mb/s (1.4 MiB/s)
    12lanes 1 12mode 1.1 12power 100mA 12chip-ID 04d9:f30c 12class-ID 0300
  12Device-2 1-3:3 12info ASUSTek N-KEY Device 12type keyboard 12driver asus,usbhid
    12interfaces 3 12rev 2.0 12speed 12 Mb/s (1.4 MiB/s) 12lanes 1 12mode 1.1 12power 100mA
    12chip-ID 0b05:19b6 12class-ID 0301
  12Hub-2 2-0:1 12info super-speed hub 12ports 2 12rev 3.1 12speed 10 Gb/s (1.16 GiB/s)
    12lanes 1 12mode 3.2 gen-2x1 12chip-ID 1d6b:0003 12class-ID 0900
  12Device-1 2-2:2 12info Toshiba America EXTERNAL_USB 12type mass storage
    12driver usb-storage 12interfaces 1 12rev 3.0 12speed 5 Gb/s (596.0 MiB/s) 12lanes 1
    12mode 3.2 gen-1x1 12power 896mA 12chip-ID 0480:0825 12class-ID 0806
    12serial <filter>
  12Hub-3 3-0:1 12info hi-speed hub with single TT 12ports 4 12rev 2.0
    12speed 480 Mb/s (57.2 MiB/s) 12lanes 1 12mode 2.0 12chip-ID 1d6b:0002 12class-ID 0900
  12Hub-4 3-2:2 12info Realtek RTS5411 Hub 12ports 4 12rev 2.1
    12speed 480 Mb/s (57.2 MiB/s) 12lanes 1 12mode 2.0 12chip-ID 0bda:5411 12class-ID 0900
  12Device-1 3-3:3 12info Shenzhen Goodix FingerPrint 12type <vendor specific>
    12driver N/A 12interfaces 1 12rev 2.0 12speed 12 Mb/s (1.4 MiB/s) 12lanes 1 12mode 1.1
    12power 100mA 12chip-ID 27c6:521d 12class-ID ff00
  12Device-2 3-4:4 12info IMC Networks Wireless_Device 12type bluetooth
    12driver btusb 12interfaces 3 12rev 2.1 12speed 480 Mb/s (57.2 MiB/s) 12lanes 1
    12mode 2.0 12power 100mA 12chip-ID 13d3:3563 12class-ID e001 12serial <filter>
  12Hub-5 4-0:1 12info super-speed hub 12ports 2 12rev 3.1 12speed 10 Gb/s (1.16 GiB/s)
    12lanes 1 12mode 3.2 gen-2x1 12chip-ID 1d6b:0003 12class-ID 0900
  12Hub-6 4-2:2 12info Realtek Hub 12ports 4 12rev 3.0 12speed 5 Gb/s (596.0 MiB/s)
    12lanes 1 12mode 3.2 gen-1x1 12chip-ID 0bda:0411 12class-ID 0900
  12Device-1 4-2.3:3 12info Realtek RTL8153 Gigabit Ethernet Adapter 12type Network
    12driver r8152 12interfaces 1 12rev 3.0 12speed 5 Gb/s (596.0 MiB/s) 12lanes 1
    12mode 3.2 gen-1x1 12power 288mA 12chip-ID 0bda:8153 12class-ID 0000
    12serial <filter>
  12Device-2 4-2.4:4 12info Kingston DataTraveler 100 G3/G4/SE9 G2/50 Kyson
    12type mass storage 12driver usb-storage 12interfaces 1 12rev 3.0
    12speed 5 Gb/s (596.0 MiB/s) 12lanes 1 12mode 3.2 gen-1x1 12power 504mA
    12chip-ID 0951:1666 12class-ID 0806 12serial <filter>
12Sensors:
  12System Temperatures 12cpu 48.5 C 12mobo 34.0 C 12gpu amdgpu 12temp 38.0 C
  12Fan Speeds (rpm) 12cpu 0
12Repos:
  12Packages 1888 12pm pacman 12pkgs 1865 12libs 439 12tools pamac,yay 12pm flatpak 12pkgs 23
  12Active pacman repo servers in /etc/pacman.d/mirrorlist
    121 https: //mirrors.xtom.de/manjaro/stable/$repo/$arch
    122 https: //mirror.netcologne.de/manjaro/stable/$repo/$arch
    123 https: //ftp.caliu.cat/pub/distribucions/manjaro/stable/$repo/$arch
    124 https: //mirrors.sonic.net/manjaro/stable/$repo/$arch
    125 http: //manjaro.mirrors.theom.nz/manjaro/stable/$repo/$arch
12Processes:
  12CPU top 5 of 353
  121 12cpu 100% 12command ps 12pid 41375 12mem 4.10 MiB (0.0%)
  122 12cpu 1.4% 12command firefox 12pid 38682 12mem 556.8 MiB (3.6%)
  123 12cpu 0.6% 12command firefox 12pid 38983 12mem 224.4 MiB (1.4%)
  124 12cpu 0.4% 12command plasmashell 12pid 37972 12mem 377.4 MiB (2.4%)
  125 12cpu 0.3% 12command Xorg 12pid 37774 12mem 222.8 MiB (1.4%)
  12Memory top 5 of 353
  121 12mem 556.8 MiB (3.6%) 12command firefox 12pid 38682 12cpu 1.4%
  122 12mem 377.4 MiB (2.4%) 12command plasmashell 12pid 37972 12cpu 0.4%
  123 12mem 224.4 MiB (1.4%) 12command firefox 12pid 38983 12cpu 0.6%
  124 12mem 222.8 MiB (1.4%) 12command Xorg 12pid 37774 12cpu 0.3%
  125 12mem 201.6 MiB (1.3%) 12command kwin_x11 12pid 37918 12cpu 0.3%
12Info:
  12Processes 353 12Power 12uptime 1h 10m 12states freeze,mem,disk 12suspend s2idle
    12wakeups 0 12hibernate platform 12avail shutdown, reboot, suspend, test_resume
    12image 5.99 GiB 12services org_kde_powerdevil, power-profiles-daemon, upowerd
    12Init systemd 12v 255 12default graphical 12tool systemctl
  12Compilers 12clang 16.0.6 12gcc 13.2.1 12Client systemd 12inxi 3.3.34

and the second:

[manjaro /]# journalctl --boot=-1 --priority=3 --catalog --no-pager
May 08 22:06:30 workpc kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.GP17.XHC0._S0W], AE_ALREADY_EXISTS (20230331/dswload2-326)
May 08 22:06:30 workpc kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20230331/psobject-220)
May 08 22:06:30 workpc kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.GP17.XHC1._S0W], AE_ALREADY_EXISTS (20230331/dswload2-326)
May 08 22:06:30 workpc kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20230331/psobject-220)
May 08 22:06:30 workpc kernel: amd_gpio AMDI0030:00: Invalid config param 0014
May 08 22:06:30 workpc kernel: amd_gpio AMDI0030:00: Invalid config param 0014
May 08 22:06:30 workpc kernel: amd_gpio AMDI0030:00: Invalid config param 0014
May 08 22:06:30 workpc kernel: amd_gpio AMDI0030:00: Invalid config param 0014
May 08 22:06:30 workpc kernel: amd_gpio AMDI0030:00: Invalid config param 0014
May 08 22:06:30 workpc kernel: amd_gpio AMDI0030:00: Invalid config param 0014
May 08 22:06:31 workpc kernel: asus 0003:0B05:19B6.0005: Asus input not registered
May 08 22:06:35 workpc systemd-coredump[1262]: [LNK] Process 1251 (cups-proxyd) of user 0 dumped core.
                                               
                                               Stack trace of thread 1251:
                                               #0  0x000055cbae0edd75 update_next_proxy_printer (cups-proxyd + 0x9d75)
                                               #1  0x00007faf9160f2c8 n/a (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.7200.4 + 0x562c8)
                                               ELF object binary architecture: AMD x86-64
-- Subject: Process 1251 (cups-proxyd) dumped core
-- Defined-By: systemd
-- Support: https://forum.manjaro.org/c/support
-- Documentation: man:core(5)
-- 
-- Process 1251 (cups-proxyd) crashed and dumped core.
-- 
-- This usually indicates a programming error in the crashing program and
-- should be reported to its vendor as a bug.
May 08 22:20:51 workpc dbus-broker-launch[921]: Activation request for 'org.freedesktop.nm_dispatcher' failed.
20

sorry for my mistakes in explanation.
If we discard first moment of time what caused the problems,
and take only this current moment of time only.

For now i have actual version of live usb, from whitch i load manjaro in operative memory.
When it loaded, i go to my broken linux through chroot and operate there in konsole. From where i bring logs.

21

That inxi output looks strange :face_with_raised_eyebrow:

The most stuff is missing… i have no clue if that is normal when doing liveboot+ chroot + inxi or what’s going on here.