Can’t mount NTFS USB-SSD after update.
USB-SSD works fine on Windows11/Ubuntu20.04 machines.
Dolphin message.
Error mounting /dev/sdb2 at /run/media/furukawa/StableDiffusion: wrong fs type, bad option, bad superblock on /dev/sdb2, missing codepage or helper program, or other error
Dmsg
[110201.435577] usb 3-1.4: new full-speed USB device number 31 using xhci_hcd
[110201.653627] usb 3-1.4: New USB device found, idVendor=1d5c, idProduct=7102, bcdDevice= 1.00
[110201.653643] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[110201.653644] usb 3-1.4: Product: Generic Billboard Device
[110201.653645] usb 3-1.4: Manufacturer: Fresco Logic, Inc
[110402.039854] usb 4-2: new SuperSpeed USB device number 7 using xhci_hcd
[110402.057369] usb 4-2: New USB device found, idVendor=04bb, idProduct=0196, bcdDevice= 2.03
[110402.057372] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[110402.057373] usb 4-2: Product: I-O DATA SSPS-US
[110402.057374] usb 4-2: Manufacturer: I-O DATA DEVICE, INC.
[110402.057375] usb 4-2: SerialNumber: 234320002678
[110402.062795] scsi host1: uas
[110402.063254] scsi 1:0:0:0: Direct-Access I-O DATA SSPS-US 0203 PQ: 0 ANSI: 6
[110404.544229] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[110404.544233] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[110404.544410] sd 1:0:0:0: [sdb] Write Protect is off
[110404.544411] sd 1:0:0:0: [sdb] Mode Sense: 5f 00 00 08
[110404.544735] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[110404.544922] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[110404.544923] sd 1:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[110404.547760] sdb: sdb1 sdb2
[110404.547936] sd 1:0:0:0: [sdb] Attached SCSI disk
[110404.605879] ntfs3: sdb2: It is recommened to use chkdsk.
[110404.610184] ntfs3: sdb2: volume is dirty and "force" flag is not set!
Moderator edit: In the future, please use proper formatting: [HowTo] Post command output and file content as formatted text