[Testing Update] 2023-03-11 - Kernels, Mesa 22.3.7, Phosh, LibreOffice 7.4.6

[omano]

Continuing the discussion from [Testing Update] 2023-03-08 - Kernels, Wine, Systemd, KDE-Git, Python, Haskell:

@Zesko

Of course not CPU, but that is ACPI inside the motherboard.

I think I have seen these 17° thing since forever (I mean two years or something), now that I think about it, first time I saw it was in sensors output.

 omano  ~ $  sensors
k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +45.4 C  
Tccd1:        +43.0 C  

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +16.8 C  (crit = +20.8 C)
temp2:        +16.8 C  (crit = +20.8 C)

gigabyte_wmi-virtual-0
Adapter: Virtual device
temp1:        +28.0 C  
temp2:        +45.0 C  
temp3:        +45.0 C  
temp4:        +15.0 C  
temp5:        +51.0 C  
temp6:        +57.0 C  

nvme-pci-0100
Adapter: PCI adapter
Composite:    +42.9 C  (low  =  -0.1 C, high = +86.8 C)
                       (crit = +89.8 C)
Sensor 1:     +42.9 C  (low  = -273.1 C, high = +65261.8 C)

[Zesko]

Yes, my old AM4 motherboard has no issue and does not have the ACPI of PCT0 sensor. But my new motherboard has this PCT0.

The issue only affects thermal_zone1 in journalctl log.

@Zesko

$ journalctl --no-pager -p 3 -b -1 --output=cat
thermal thermal_zone1: acpitz: critical temperature reached, shutting down
reboot: HARDWARE PROTECTION shutdown (Temperature too high)
reboot: Hardware protection timed-out. Trying forced poweroff

You can see this thermal_zone1 is for PCTO in dmesg log.

@Zesko

[    2.652159] thermal LNXTHERM:00: registered as thermal_zone0
[    2.652160] ACPI: thermal: Thermal Zone [TZ10] (17 C)
[    2.652230] thermal LNXTHERM:01: registered as thermal_zone1
[    2.652231] ACPI: thermal: Thermal Zone [PCT0] (17 C)
[    2.652295] thermal LNXTHERM:02: registered as thermal_zone2
[    2.652296] ACPI: thermal: Thermal Zone [UAD0] (17 C)

Other ZT10 and UAD0 have no issue.

Maybe all current kernels don’t know about PCT0, this is why they forced my PC to shut down after waking up when PCTO is in critical condition (higher than 17°C after waking up from sleep?)

[stephane]

is it a gigabyte motherbaord ?
from mine

sensors
it8792-isa-0a60
Adapter: ISA adapter
in0:           1.78 V  (min =  +0.00 V, max =  +2.78 V)
in1:         676.00 mV (min =  +0.00 V, max =  +2.78 V)
in2:         992.00 mV (min =  +0.00 V, max =  +2.78 V)
+3.3V:         1.69 V  (min =  +0.00 V, max =  +2.78 V)
in4:           1.78 V  (min =  +0.00 V, max =  +2.78 V)
in5:           1.18 V  (min =  +0.00 V, max =  +2.78 V)
in6:           2.78 V  (min =  +0.00 V, max =  +2.78 V)  ALARM
3VSB:          1.68 V  (min =  +0.00 V, max =  +2.78 V)
Vbat:          1.56 V  
fan1:           0 RPM  (min =    0 RPM)
fan2:           0 RPM  (min =    0 RPM)
fan3:         721 RPM  (min =    0 RPM)
temp1:        +38.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp2:        -55.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp3:        +35.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
intrusion0:  ALARM

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +16.8°C  (crit = +20.8°C)
temp2:        +16.8°C  (crit = +20.8°C)

k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +47.6°C  
Tccd1:        +40.5°C  

[stephane]

revert or apply patches
kernel 6.2
https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.2.4

kernel 6.1
https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.17

phoronix reveals the trouble

Linux 6.2.4 & 6.1.17 Released To Fix An Easy-To-Trigger Kernel Oops

added ,
new versions kernels on all 5.x and 6.x series …
https://www.kernel.org/

[psifi]

After applying testing update 2023-03-11 my system seems to operate normally but it gets stuck on shutdown and reboot.
I get a lot of messages on the screen, only some of them i can find in the journal:

Mär 11 13:53:04 Peterputer kernel: #PF: supervisor read access in kernel mode
Mär 11 13:53:04 Peterputer kernel: #PF: error_code(0x0000) - not-present page
Mär 11 13:53:26 Peterputer kernel: NMI watchdog: Watchdog detected hard LOCKUP on cpu 6
Mär 11 13:53:26 Peterputer kernel: rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 6-...D } 6426 jiffies s: 693 root: 0x40/.
Mär 11 13:53:26 Peterputer kernel: rcu: blocking rcu_node structures (internal RCU debug):
Mär 11 13:53:33 Peterputer kernel: watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [khugepaged:122]
Mär 11 13:53:04 Peterputer systemd-coredump[7620]: Failed to connect to coredump service: Connection refused
Mär 11 13:53:04 Peterputer kernel: BUG: kernel NULL pointer dereference, address: 0000000000000028
Mär 11 13:53:04 Peterputer kernel: #PF: supervisor read access in kernel mode
Mär 11 13:53:04 Peterputer kernel: #PF: error_code(0x0000) - not-present page
Mär 11 13:53:26 Peterputer kernel: NMI watchdog: Watchdog detected hard LOCKUP on cpu 6
Mär 11 13:53:26 Peterputer kernel: rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 6-...D } 6426 jiffies s: 693 root: 0x40/.
Mär 11 13:53:26 Peterputer kernel: rcu: blocking rcu_node structures (internal RCU debug):
Mär 11 13:53:33 Peterputer kernel: watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [khugepaged:122]
Mär 11 13:53:04 Peterputer systemd-coredump[7620]: Failed to connect to coredump service: Connection refused
Mär 11 13:53:04 Peterputer kernel: BUG: kernel NULL pointer dereference, address: 0000000000000028
Mär 11 13:53:04 Peterputer kernel: #PF: supervisor read access in kernel mode
Mär 11 13:53:04 Peterputer kernel: #PF: error_code(0x0000) - not-present page
Mär 11 13:53:26 Peterputer kernel: NMI watchdog: Watchdog detected hard LOCKUP on cpu 6
Mär 11 13:53:26 Peterputer kernel: rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 6-...D } 6426 jiffies s: 693 root: 0x40/.
Mär 11 13:53:26 Peterputer kernel: rcu: blocking rcu_node structures (internal RCU debug):
Mär 11 13:53:33 Peterputer kernel: watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [khugepaged:122]

recovering system to a state just before update using timeshift resolves the problem.
my system specifications:

[peter@Peterputer ~]$ inxi -v7azy
System:
  Kernel: 6.2.3-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.2-x86_64
    root=UUID=fd6d419e-7fea-49a6-8d4e-5e3f2207d201 rw quiet
    udev.log_priority=3 iommu=pt vfio-pci.ids=10de:1380,10de:0fbc
    preempt=voluntary amd_pstate=passive
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel, cairo-dock
    wm: xfwm v: 4.18.0 vt: 7 dm: LightDM v: 1.32.0 Distro: Manjaro Linux
    base: Arch Linux
Machine:
  Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
  Mobo: ASUSTeK model: TUF GAMING B550M-PLUS v: Rev X.0x
    serial: <superuser required> UEFI: American Megatrends v: 2423
    date: 08/10/2021
Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 27.21 GiB used: 2.72 GiB (10.0%)
  RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: AMD Ryzen 7 5700G with Radeon Graphics bits: 64 type: MT MCP
    arch: Zen 3 gen: 4 level: v3 note: check built: 2021-22
    process: TSMC n7 (7nm) family: 0x19 (25) model-id: 0x50 (80) stepping: 0
    microcode: 0xA50000C
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
    L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 16 MiB
    desc: 1x16 MiB
  Speed (MHz): avg: 643 high: 4297 min/max: 400/5288 boost: enabled scaling:
    driver: amd-pstate governor: schedutil cores: 1: 400 2: 400 3: 400 4: 400
    5: 400 6: 400 7: 400 8: 400 9: 400 10: 400 11: 4297 12: 400 13: 400 14: 400
    15: 400 16: 400 bogomips: 137655
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
    bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
    constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
    cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists erms extapic
    extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht
    hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
    misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
    nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
    pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt
    pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
    skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor
    svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl
    v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt
    xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
    STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA GM107 [GeForce GTX 750 Ti] driver: vfio-pci v: N/A
    alternate: nouveau non-free: 525.xx+ status: current (as of 2023-02)
    arch: Maxwell code: GMxxx process: TSMC 28nm built: 2014-19 pcie: gen: 1
    speed: 2.5 GT/s lanes: 8 link-max: gen: 3 speed: 8 GT/s lanes: 16
    bus-ID: 01:00.0 chip-ID: 10de:1380 class-ID: 0300
  Device-2: AMD Cezanne [Radeon Vega Series / Radeon Mobile Series]
    vendor: ASUSTeK driver: amdgpu v: kernel arch: GCN-5 code: Vega
    process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16
    link-max: gen: 4 speed: 16 GT/s ports: active: HDMI-A-1 empty: DP-1
    bus-ID: 08:00.0 chip-ID: 1002:1638 class-ID: 0300 temp: 40.0 C
  Display: x11 server: X.Org v: 21.1.7 compositor: xfwm v: 4.18.0 driver: X:
    loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa dri: radeonsi
    gpu: amdgpu display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
    s-diag: 582mm (22.93")
  Monitor-1: HDMI-A-1 mapped: HDMI-A-0 model: BenQ G2420HDBL serial: <filter>
    built: 2010 res: 1920x1080 hz: 60 dpi: 102 gamma: 1.2
    size: 477x268mm (18.78x10.55") diag: 604mm (23.8") ratio: 16:9 modes:
    max: 1920x1080 min: 720x400
  API: OpenGL v: 4.6 Mesa 22.3.7 renderer: AMD Radeon Graphics (renoir LLVM
    15.0.7 DRM 3.49 6.2.3-1-MANJARO) direct-render: Yes
Audio:
  Device-1: NVIDIA GM107 High Definition Audio [GeForce 940MX] driver: vfio-pci
    alternate: snd_hda_intel pcie: speed: Unknown lanes: 63 link-max: gen: 6
    speed: 64 GT/s bus-ID: 01:00.1 chip-ID: 10de:0fbc class-ID: 0403
  Device-2: AMD Renoir Radeon High Definition Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
    link-max: gen: 4 speed: 16 GT/s bus-ID: 08:00.1 chip-ID: 1002:1637
    class-ID: 0403
  Device-3: AMD Family 17h/19h HD Audio vendor: ASUSTeK driver: snd_hda_intel
    v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4
    speed: 16 GT/s bus-ID: 08:00.6 chip-ID: 1022:15e3 class-ID: 0403
  Sound API: ALSA v: k6.2.3-1-MANJARO running: yes
  Sound Interface: sndio v: N/A running: no
  Sound Server-1: PulseAudio v: 16.1 running: no
  Sound Server-2: PipeWire v: 0.3.66 running: yes
Network:
  Device-1: Realtek RTL8125 2.5GbE vendor: ASUSTeK driver: r8169 v: kernel
    pcie: gen: 2 speed: 5 GT/s lanes: 1 port: e000 bus-ID: 07:00.0
    chip-ID: 10ec:8125 class-ID: 0200
  IF: enp7s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IF-ID-1: bridge0 state: up speed: 1000 Mbps duplex: unknown mac: <filter>
  IP v4: <filter> type: noprefixroute scope: global broadcast: <filter>
  IP v6: <filter> scope: link
  IF-ID-2: virbr0 state: down mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  WAN IP: <filter>
Bluetooth:
  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB
    driver: btusb v: 0.8 bus-ID: 2-1.1:4 chip-ID: 0a12:0001 class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.16 TiB used: 756.98 GiB (63.8%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
    model: SSD 970 EVO Plus 1TB size: 931.51 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 2B2QEXM7 temp: 46.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Kingston model: SA400S37240G
    size: 223.57 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: 1103 scheme: GPT
  ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: SanDisk model: Ultra USB 3.0
    size: 28.65 GiB block-size: physical: 512 B logical: 512 B type: N/A
    serial: <filter> rev: 1.00 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  ID-4: /dev/sdc maj-min: 8:32 type: USB model: USB 2.0 Flash Disk
    size: 1.89 GiB block-size: physical: 512 B logical: 512 B type: SSD
    serial: <filter> rev: 1100 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Optical-1: /dev/sr0 vendor: HL-DT-ST model: BD-RE BH10LS30 rev: 1.01
    dev-links: cdrom
  Features: speed: 40 multisession: yes audio: yes dvd: yes
    rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
  Optical-2: /dev/sr1 vendor: CDEmu model: CD-ROM rev: 1.0  dev-links: N/A
  Features: speed: 48 multisession: yes audio: yes dvd: yes
    rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
  ID-1: / raw-size: 140.62 GiB size: 138.24 GiB (98.30%)
    used: 88.04 GiB (63.7%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2
    label: Manjaro-Linux uuid: fd6d419e-7fea-49a6-8d4e-5e3f2207d201
  ID-2: /boot/efi raw-size: 200 MiB size: 196.9 MiB (98.45%)
    used: 150 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
    label: UEFI-NVME uuid: F80C-55AF
  ID-3: /home/<filter>/.mnt/Spiele_Lokales_usw raw-size: 790.69 GiB
    size: 777.22 GiB (98.30%) used: 622.88 GiB (80.1%) fs: ext4
    dev: /dev/nvme0n1p3 maj-min: 259:3 label: Spiele_Lokales
    uuid: 4b22c773-03e6-4020-93d1-5b4204bc9b8d
  ID-4: /home/<filter>/.mnt/Sys_Progs raw-size: 60 GiB size: 60 GiB (100.00%)
    used: 46.05 GiB (76.8%) fs: ntfs dev: /dev/sda3 maj-min: 8:3 label: Sys_Progs
    uuid: 01D590002CA52D80
  ID-5: /home/<filter>/.mnt/nfs/SV_Daten raw-size: N/A size: 104.21 GiB
    used: 26.36 GiB (25.3%) fs: nfs4 remote: 192.168.0.100:/SV-Daten
  ID-6: /home/<filter>/.mnt/nfs/Server raw-size: N/A size: 4.51 TiB
    used: 2.26 TiB (50.1%) fs: nfs4 remote: 192.168.0.100:/z_Server_komplett
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 3.4 GiB used: 0 KiB (0.0%) priority: 32767
    dev: /dev/zram0
Unmounted:
  ID-1: /dev/sda1 maj-min: 8:1 size: 300 MiB fs: vfat label: UEFI-SSD
    uuid: 0522-3A13
  ID-2: /dev/sda2 maj-min: 8:2 size: 29.7 GiB fs: ext4 label: Deb_Save
    uuid: ab6ca684-f85a-4eb6-a330-0e69e6b5f0d7
  ID-3: /dev/sda4 maj-min: 8:4 size: 95.92 GiB fs: ext4 label: Sys_Save
    uuid: dab078fe-fb8b-4f68-bab0-30d8a414aa75
  ID-4: /dev/sdb1 maj-min: 8:17 size: 28.62 GiB fs: exfat label: Ventoy
    uuid: 4072-A931
  ID-5: /dev/sdb2 maj-min: 8:18 size: 32 MiB fs: vfat label: VTOYEFI
    uuid: 440A-1007
  ID-6: /dev/sdc1 maj-min: 8:33 size: 1.89 GiB fs: vfat label: ASUS_MB
    uuid: 604A-4BF6
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 10 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: Genesys Logic Hub ports: 4 rev: 2.1 speed: 480 Mb/s
    power: 500mA chip-ID: 05e3:0610 class-ID: 0900
  Device-1: 1-6:3 info: ASUSTek AURA LED Controller type: HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 16mA
    chip-ID: 0b05:1939 class-ID: 0300 serial: <filter>
  Hub-3: 1-7:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
    power: 100mA chip-ID: 05e3:0610 class-ID: 0900
  Device-1: 1-8:5 info: Trust B.V. Optical Mouse type: Mouse
    driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s
    power: 100mA chip-ID: 15d9:0a33 class-ID: 0301
  Hub-4: 2-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Hub-5: 2-1:2 info: Genesys Logic Hub ports: 4 rev: 2.1 speed: 480 Mb/s
    power: 100mA chip-ID: 05e3:0610 class-ID: 0900
  Device-1: 2-1.1:4 info: Cambridge Silicon Radio Bluetooth Dongle (HCI mode)
    type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s
    power: 100mA chip-ID: 0a12:0001 class-ID: e001
  Device-2: 2-2:3 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive
    type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s
    power: 100mA chip-ID: 090c:1000 class-ID: 0806 serial: <filter>
  Hub-6: 3-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-7: 3-1:2 info: Genesys Logic hub ports: 4 rev: 3.0 speed: 5 Gb/s
    chip-ID: 05e3:0616 class-ID: 0900
  Hub-8: 4-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 4-1:2 info: Ortek IR receiver [VRC-1100 Vista MCE Remote Control]
    type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1
    speed: 1.5 Mb/s power: 100mA chip-ID: 05a4:9881 class-ID: 0300
  Device-2: 4-2:3 info: ThrustMaster T.Flight Stick X type: HID
    driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 80mA
    chip-ID: 044f:b106 class-ID: 0300
  Hub-9: 5-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-10: 6-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-11: 6-1:2 info: Genesys Logic Hub ports: 4 rev: 3.0 speed: 5 Gb/s
    chip-ID: 05e3:0612 class-ID: 0900
  Device-1: 6-1.4:3 info: SanDisk Ultra Flair type: Mass Storage
    driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA
    chip-ID: 0781:5591 class-ID: 0806 serial: <filter>
Sensors:
  System Temperatures: cpu: 36.5 C mobo: 42.0 C gpu: amdgpu temp: 39.0 C
  Fan Speeds (RPM): fan-1: 0 fan-2: 323 fan-3: 0 fan-7: 0
Info:
  Processes: 368 Uptime: 23m wakeups: 0 Init: systemd v: 252 default: graphical
  tool: systemctl Compilers: gcc: 12.2.1 clang: 15.0.7 Packages: pm: pacman
  pkgs: 2232 libs: 523 tools: pamac Shell: Bash v: 5.1.16
  running-in: xfce4-terminal inxi: 3.3.25
[peter@Peterputer ~]$ 

[chainofflowers]

Cannot load firmware for Asus PCE-AC88 - Again!

Hi, kernel v6.2.3 does not like my Broadcom WiFi card, similar to the issue that I had in January - although this time it is has another cause…

Anyone has already stumbled upon that?
I’m going to ask in linux-wireless for help, but so far I couldn’t find any report there yet. I only saw this but still can’t say that it what I am experiencing…

[stephane]

it may come from Uefi motherboard

TUF GAMING B550M-PLUS｜Motherboards｜ASUS USA

see version 2816

you need this ?

 preempt=voluntary 

[chainofflowers]

OK, the regression discussed on linux-wireless about broadcom actually prevents my raspis to connect…
I wonder if someone is reporting it on manjaro-arm…

[psifi]

@stephane

it may come from Uefi motherboard

I dont think so, this ASUS statement sounds like commercial blabla to me.
System is in use for about one and a half year now with manjaro testing and this problem is present since today (after current update) and can be resolved by rolling back to former state.
But anyway, the problem seems not to be kernel-related. Both installed kernels (6.2 and 6.1-lts) have this problem when trying to reboot or shutdown, both since current update.

preempt=voluntary was included by me a long time ago as one kernel-option to optimize performance for a virtual windows 10 installation with gpu-passthrough without problem, but i will try without this option.
After testing: does not solve anything

[stephane]

more from from recent kernels

Linux 6.2.4 & 6.1.17 Released To Fix An Easy-To-Trigger Kernel Oops

[psifi]

@stephane

more from from recent kernels

Linux 6.2.4 & 6.1.17 Released To Fix An Easy-To-Trigger Kernel Oops - Phoronix

okay, that’s probably the bad guy, hopefully!

[Yochanan]

Just pushed 6.2.4-1 & 6.1.17-1.

[linux-aarhus]

I just swooped past the 6.2.3 and 6.1.17 release - just got 6.2.4 and 6.1.17 on unstable.

[stephane]

for unstable version 6.2.5 & 6.1.19 ( all others series has been released )

[Yochanan]

The new point releases are building now.

[stephane]

G H for hotfix patch

Uptime Funk - A SUSE Music Parody

[philm]

Well, the wifi fix is coming … [pkg-upd] 6.2.5-1 (e66a84e7) · Commits · Packages / Core / linux62 · GitLab

[psifi]

@psifi

After applying testing update 2023-03-11 my system seems to operate normally but it gets stuck on shutdown and reboot.

Resolved by kernel update linux62 (6.2.3-1 → 6.2.4-1) and linux61 (6.1.16-1 → 6.1.17-1)

Thank you Yochanan for lightspeed reaction and stephane for finding the solution

[stephane]

thank team manjaro for responding so quickly

[Mic]

May be linked to the problem I had with a previous unstable version. (did not test on this one)

[Testing Update] 2023-03-03 - KDE Gear 22.12.3, Deepin, Mauikit, LibreOffice 7.5.1, Steam, Python, Haskell

I have an ASUS TUF D4 WIFI Z690 motherboard. After the update to the testing branch (from stable) the wifi was not working anymore. My guess is that the hardware was not recognized because it didn’t even had the wifi checks in the Network window (see image) [image] After reverting to the stable branch the motherboard returned to work properly.