Terratec Cinergy XS USB

Hallo,

seit ca. 1 Woche (da ich kurzzeitig Schwierigkeiten nach einem selbst verschuldeten Kernelfehler) erkennt Kaffeine (und auch me-tv) meine TV-Karte nicht mehr.
Meldung: " Didn't find a device with valid settings or access permissions are wrong. Please check the Configure Television window."

Dabei leuchtet die Betriebs-LED des Sticks grün, lsusb gibt aus, dass das Gerät angeschlossen ist

> Bus 003 Device 002: ID 8087:8000 Intel Corp. 
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 001 Device 002: ID 8087:8008 Intel Corp. 
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 004 Device 002: ID 05e3:0617 Genesys Logic, Inc. 
> Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 002 Device 005: ID 0781:5590 SanDisk Corp. Ultra Dual
> Bus 002 Device 003: ID 15d9:0a4f Trust International B.V. Optical Mouse
> Bus 002 Device 006: ID 045e:07b6 Microsoft Corp. Comfort Curve Keyboard 3000
> Bus 002 Device 009: ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid T XS
> Bus 002 Device 008: ID 0bda:c820 Realtek Semiconductor Corp. 
> Bus 002 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

und auch dmesg führt das Gerät an:

> [ 7114.585807] usb 2-1.2: new high-speed USB device number 9 using xhci_hcd
> [ 7114.684731] usb 2-1.2: New USB device found, idVendor=0ccd, idProduct=0042, bcdDevice= 1.00
> [ 7114.684737] usb 2-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
> [ 7114.684740] usb 2-1.2: Product: Cinergy Hybrid T USB XS
> [ 7114.684743] usb 2-1.2: Manufacturer: TerraTec Electronic GmbH
> [ 7114.728855] media: Linux media interface: v0.10
> [ 7114.745867] videodev: Linux video capture interface: v2.00
> [ 7114.755876] em28xx 2-1.2:1.0: New device TerraTec Electronic GmbH Cinergy Hybrid T USB XS @ 480 Mbps (0ccd:0042, interface 0, class 0)
> [ 7114.755878] em28xx 2-1.2:1.0: Video interface 0 found: isoc
> [ 7114.755879] em28xx 2-1.2:1.0: DVB interface 0 found: isoc
> [ 7114.815848] em28xx 2-1.2:1.0: chip ID is em2882/3
> [ 7114.990166] em28xx 2-1.2:1.0: EEPROM ID = 1a eb 67 95, EEPROM hash = 0x23d0b096
> [ 7114.990170] em28xx 2-1.2:1.0: EEPROM info:
> [ 7114.990172] em28xx 2-1.2:1.0: 	AC97 audio (5 sample rates)
> [ 7114.990174] em28xx 2-1.2:1.0: 	500mA max power
> [ 7114.990178] em28xx 2-1.2:1.0: 	Table at offset 0x06, strings=0x326a, 0x349c, 0x0000
> [ 7115.049137] em28xx 2-1.2:1.0: Identified as Terratec Cinergy Hybrid T USB XS (em2882) (card=55)
> [ 7115.049146] em28xx 2-1.2:1.0: analog set to isoc mode.
> [ 7115.049148] em28xx 2-1.2:1.0: dvb set to isoc mode.
> [ 7115.049550] usbcore: registered new interface driver em28xx
> [ 7115.068652] em28xx 2-1.2:1.0: Registering V4L2 extension
> [ 7115.078716] tvp5150 7-005c: tvp5150 (4.0) chip found @ 0xb8 (2-1.2:1.0)
> [ 7115.078717] tvp5150 7-005c: tvp5150am1 detected.
> [ 7115.150494] tuner: 7-0061: Tuner -1 found with type(s) Radio TV.
> [ 7115.156776] xc2028 7-0061: creating new instance
> [ 7115.156778] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner
> [ 7115.156930] em28xx 2-1.2:1.0: Config register raw data: 0x50
> [ 7115.157243] em28xx 2-1.2:1.0: AC97 vendor ID = 0x83848384
> [ 7115.157354] xc2028 7-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
> [ 7115.157365] em28xx 2-1.2:1.0: AC97 features = 0x7652
> [ 7115.157367] em28xx 2-1.2:1.0: Unknown AC97 audio processor detected!
> [ 7115.332414] xc2028 7-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
> [ 7116.322943] MTS (4), id 00000000000000ff:
> [ 7116.322952] xc2028 7-0061: Loading firmware for type=MTS (4), id 0000000100000007.
> [ 7116.645320] em28xx 2-1.2:1.0: V4L2 video device registered as video0
> [ 7116.645327] em28xx 2-1.2:1.0: V4L2 VBI device registered as vbi0
> [ 7116.648578] em28xx 2-1.2:1.0: V4L2 extension successfully initialized
> [ 7116.648581] em28xx: Registered (Em28xx v4l2 Extension) extension
> [ 7116.667865] em28xx 2-1.2:1.0: Binding DVB extension
> [ 7116.847129] xc2028 7-0061: attaching existing instance
> [ 7116.847134] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner
> [ 7116.847139] em28xx 2-1.2:1.0: xc3028 attached
> [ 7116.847141] dvbdev: DVB: registering new adapter (2-1.2:1.0)
> [ 7116.847147] em28xx 2-1.2:1.0: DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
> [ 7116.851453] em28xx 2-1.2:1.0: DVB extension successfully initialized
> [ 7116.851466] em28xx: Registered (Em28xx dvb Extension) extension
> [ 7116.860935] em28xx 2-1.2:1.0: Registering input extension
> [ 7116.889104] Registered IR keymap rc-terratec-cinergy-xs
> [ 7116.889371] rc rc0: 2-1.2:1.0 IR as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.2/2-1.2:1.0/rc/rc0
> [ 7116.889427] input: 2-1.2:1.0 IR as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.2/2-1.2:1.0/rc/rc0/input19
> [ 7116.889612] rc rc0: lirc_dev: driver em28xx registered at minor = 0, scancode receiver, no transmitter
> [ 7116.889615] em28xx 2-1.2:1.0: Input extension successfully initialized
> [ 7116.889617] em28xx: Registered (Em28xx Input Extension) extension
> [ 7223.854721] audit: type=1130 audit(1557495815.616:90): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shadow comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> [ 7223.868377] audit: type=1131 audit(1557495815.630:91): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shadow comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> [ 7223.883949] audit: type=1130 audit(1557495815.646:92): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=logrotate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> [ 7223.883954] audit: type=1131 audit(1557495815.646:93): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=logrotate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> [ 7224.805620] audit: type=1130 audit(1557495816.566:94): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=updatedb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> [ 7224.805623] audit: type=1131 audit(1557495816.566:95): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=updatedb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

Das sieht doch alles rund aus, oder? Hat jemand eine Idee, weshalb der dvbt Stick plötzlich nicht mehr funktioniert?

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.