Suspend problems, broken dsdt table

[Siema]

@brahma

do you have actually the deep sleep available? check if deep is listed:
cat /sys/power/mem_sleep

Yes, it is avialbe here:

cat /sys/power/mem_sleep                                       
[s2idle] deep

(I knotw currently s2 is enabled but every time I’m testing I change it temporarly)

@brahma

if yes, you can try also these parameters:
i8042.nomux=1 i8042.reset=1 atkbd.reset=1

Are they diffrent in anyway from the ones before?
Update: Tried it, keyboard issue still present

@brahma

also you can try modprobe the module during suspend;
create this script:
sudo nano /usr/lib/systemd/system-sleep/fix_i8042.sh
and put there this:

#!/bin/sh
case $1/$2 in
  pre/*)
    echo "Removing 'i8042' for $2..."
    modprobe -r i8042
    ;;
  post/* )
    echo "Waking up from $2 , adding 'i8042' ..."
    modprobe i8042
    ;;
esac

save it with ctrl+x, press ‘y’, then enter;
then navigate to the folder and open terminal in the system-sleep folder and run:
chmod a+x fix_i8042.sh
./fix_i8042.sh
reboot and check

Did that, the issue with the keyboard wasn’t fix but the errors changed:

lip 13 18:00:22 siema systemd-sleep[2904]: Waking up from suspend , adding 'i8042' ...
lip 13 18:00:22 siema systemd-sleep[2906]: Error: TLP power save is disabled. Set TLP_ENABLE=1 in /etc/tlp.conf.
lip 13 18:00:22 siema (sd-executor)[2903]: /usr/lib/systemd/system-sleep/tlp failed with exit status 1.
lip 13 18:00:25 siema kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
lip 13 18:00:25 siema kernel: i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
lip 13 18:00:25 siema kernel: i8042: Can't read CTR while initializing i8042
lip 13 18:00:25 siema kernel: i8042: probe of i8042 failed with error -5

[brahma]

@Siema

lip 13 18:00:22 siema systemd-sleep[2906]: Error: TLP power save is disabled. Set TLP_ENABLE=1 in /etc/tlp.conf.
lip 13 18:00:22 siema (sd-executor)[2903]: /usr/lib/systemd/system-sleep/tlp failed with exit status 1.

there are these logs related to tlp…

---

and you have this:

@Siema

please boot with i8042.nopnp

so test it with the mentioned parameter:
i8042.nopnp

---

and what exact modules are depending on the i8042 module:
lsmod | grep i8042

---

also check dmesg after suspend:
sudo dmesg -l warn+

[Siema]

@brahma

there are these logs related to tlp…

Yes, I disabled it and this is what this error is saying (I think)

@Siema

@brahma

also do you have tlp installed? check with:
pacman -Qs tlp
if yes, remove it:
sudo pacman -Rcns tlp
reboot and test…

Yes I have it, turned it off rebooted and nothing changed

@brahma

so test it with the mentioned parameter:
i8042.nopnp

It sait something about AUX so i figured its audio related and thats why I ingored it, but ur right its worth trying.

I booted with these parameters:
i8042.nomux=1 i8042.reset=1 atkbd.reset=1 i8042.nopnp

This is the only thing i8042 related that I found in the logs:

lip 13 21:51:34 siema kernel: i8042: PNP detection disabled
lip 13 21:51:34 siema (sd-executor)[2893]: /usr/lib/systemd/system-sleep/tlp failed with exit status 1.
lip 13 21:51:34 siema systemd[1]: systemd-suspend.service: Deactivated successfully.
lip 13 21:51:34 siema kernel: i8042: i8042 controller selftest timeout

So maybe its not i8042 related?

Here are the outputs of the commands you asked for:

lsmod | grep i8042                                           
   
i8042                  53248  0
serio                  28672  4 serio_raw,atkbd,i8042

sudo dmesg -l warn+                                            

[    0.151741]   #5  #6  #7  #8  #9 #10 #11
[    0.253506] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    1.013871] pnp 00:04: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
[    1.212383] hpet_acpi_add: no address or irqs in _CRS
[    1.515287] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.529015] usb: port power management may be unreliable
[    2.059697] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1 'systemd'
[    2.359035] acpi_call: loading out-of-tree module taints kernel.
[    3.205945] systemd-journald[365]: File /var/log/journal/946e86b2b5f54f3bbb452d3eb4fd3cf2/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    3.394513] ACPI Warning: \_SB.WCCD._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20230331/nsarguments-61)
[    3.395373] wmi_bus wmi_bus-PNP0C14:02: WQZZ data block query control method not found
[    3.421416] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff]
[    3.421421] caller igen6_probe+0x1a0/0x8d0 [igen6_edac] mapping multiple BARs
[    3.704977] hp_wmi: query 0x4 returned error 0x5
[    3.783450] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
[    4.053139] thermal thermal_zone16: failed to read out thermal zone (-61)
[    4.062053] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
[    4.432452] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
[    4.738803] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
[    5.352179] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[    5.376039] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred
[    5.639728] snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten
[    5.639733] snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten
[    5.639810] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten
[    5.639813] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten
[    5.639815] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten
[    5.639818] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten
[    5.639820] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten
[    5.639823] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten
[    5.639826] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten
[    5.639829] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten
[    5.639833] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten
[    5.639836] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten
[    5.639839] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten
[    5.639846] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3
[   28.691804] systemd-journald[365]: File /var/log/journal/946e86b2b5f54f3bbb452d3eb4fd3cf2/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[  145.515652] warning: `ThreadPoolForeg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211

Note: I don’t know if dmesg stores erros after rebbot and this is the output of the command after doing a deep suspend then hardreseting so I don’t know if this is what u want.

[brahma]

no, the dmesg are not stored, i thought that you can resume after 1 minute …
you can try the following kernel parameter which works with hp 845, and see if it works:
iommu=pt

[Siema]

@brahma

no, the dmesg are not stored, i thought that you can resume after 1 minute …

Waking from deep sleep takes 1 minute and then the computer wakes up with the keyboard not working.
Becasue of that I ussualy reset the laptop with my touchpad and run every command that I can after rebooting, such as journalctl for example.

I was able to get the dmesg without rebooting by using a external keyboard.
Here is the output:

sudo dmesg -l warn+

[    0.151481]   #5  #6  #7  #8  #9 #10 #11
[    0.246458] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.965218] pnp 00:04: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
[    1.149831] hpet_acpi_add: no address or irqs in _CRS
[    1.470205] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.478201] usb: port power management may be unreliable
[    2.049686] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1 'systemd'
[    2.289521] acpi_call: loading out-of-tree module taints kernel.
[    3.185059] ACPI Warning: \_SB.WCCD._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20230331/nsarguments-61)
[    3.214088] wmi_bus wmi_bus-PNP0C14:02: WQZZ data block query control method not found
[    3.260666] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff]
[    3.260671] caller igen6_probe+0x1a0/0x8d0 [igen6_edac] mapping multiple BARs
[    3.502060] hp_wmi: query 0x4 returned error 0x5
[    3.605438] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
[    3.822768] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
[    3.822868] thermal thermal_zone17: failed to read out thermal zone (-61)
[    3.831692] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
[    4.152675] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
[    4.453616] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
[    5.204026] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred
[    5.212502] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[    5.462982] snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten
[    5.462988] snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten
[    5.463075] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten
[    5.463078] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten
[    5.463080] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten
[    5.463082] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten
[    5.463084] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten
[    5.463088] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten
[    5.463091] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten
[    5.463094] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten
[    5.463098] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten
[    5.463101] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten
[    5.463104] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten
[    5.463112] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3
[   61.852317] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[   61.852324] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[   61.852358] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.ITLB due to previous error (AE_TIME) (20230331/psparse-529)
[   61.852365] ACPI Error: Aborting method \HWAK due to previous error (AE_TIME) (20230331/psparse-529)
[   61.852369] ACPI Error: Aborting method \_WAK due to previous error (AE_TIME) (20230331/psparse-529)
[   61.852376] ACPI Error: AE_TIME, While executing method \_WAK (20230331/hwesleep-47)
[   66.849116] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[   66.849121] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[   66.849152] ACPI Error: Aborting method \_SB.PC00.RP08.PSTA due to previous error (AE_TIME) (20230331/psparse-529)
[   66.849158] ACPI Error: Aborting method \_SB.PC00.RP08.PXP._STA due to previous error (AE_TIME) (20230331/psparse-529)
[   69.352055] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[   69.352084] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[   69.352227] ACPI Error: Aborting method \_SB.PC00.RP08.PON due to previous error (AE_TIME) (20230331/psparse-529)
[   69.352259] ACPI Error: Aborting method \_SB.PC00.RP08.PXP._ON due to previous error (AE_TIME) (20230331/psparse-529)
[   69.478179] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit
[   69.482191] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
[   69.981429] iosm 0000:57:00.0: msg timeout
[   71.997904] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[   71.997925] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[   71.997972] ACPI Error: Aborting method \_SB.WMIV.WGDS due to previous error (AE_TIME) (20230331/psparse-529)
[   71.998003] ACPI Error: Aborting method \_SB.WMIV.HVWP due to previous error (AE_TIME) (20230331/psparse-529)
[   71.998024] ACPI Error: Aborting method \_SB.WMIV.HVWA due to previous error (AE_TIME) (20230331/psparse-529)
[   71.998046] ACPI Error: Aborting method \_SB.WMIV.WMPV due to previous error (AE_TIME) (20230331/psparse-529)
[   74.550744] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[   74.550770] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[   74.550812] ACPI Error: Aborting method \_TZ.GTTP due to previous error (AE_TIME) (20230331/psparse-529)
[   74.550839] ACPI Error: Aborting method \_TZ.CPUZ._TMP due to previous error (AE_TIME) (20230331/psparse-529)
[   74.550867] thermal thermal_zone0: failed to read out thermal zone (-19)
[   77.073756] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[   77.073789] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[   77.073929] ACPI Error: Aborting method \_TZ.GTTP due to previous error (AE_TIME) (20230331/psparse-529)
[   77.073973] ACPI Error: Aborting method \_TZ.GFXZ._TMP due to previous error (AE_TIME) (20230331/psparse-529)
[   77.074018] thermal thermal_zone1: failed to read out thermal zone (-19)
[   79.596845] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[   79.596879] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[   79.596938] ACPI Error: Aborting method \_TZ.GTTP due to previous error (AE_TIME) (20230331/psparse-529)
[   79.596979] ACPI Error: Aborting method \_TZ.EXTZ._TMP due to previous error (AE_TIME) (20230331/psparse-529)
[   79.597024] thermal thermal_zone2: failed to read out thermal zone (-19)
[   82.116663] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[   82.116700] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[   82.116834] ACPI Error: Aborting method \_TZ.GTTP due to previous error (AE_TIME) (20230331/psparse-529)
[   82.116874] ACPI Error: Aborting method \_TZ.LOCZ._TMP due to previous error (AE_TIME) (20230331/psparse-529)
[   82.116915] thermal thermal_zone3: failed to read out thermal zone (-19)
[   84.636489] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[   84.636516] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[   84.636559] ACPI Error: Aborting method \_TZ.GTTP due to previous error (AE_TIME) (20230331/psparse-529)
[   84.636585] ACPI Error: Aborting method \_TZ.BATZ._TMP due to previous error (AE_TIME) (20230331/psparse-529)
[   84.636613] thermal thermal_zone4: failed to read out thermal zone (-19)
[   87.156420] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[   87.156444] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[   87.156487] ACPI Error: Aborting method \_TZ.GTTP due to previous error (AE_TIME) (20230331/psparse-529)
[   87.156513] ACPI Error: Aborting method \_TZ.CHGZ._TMP due to previous error (AE_TIME) (20230331/psparse-529)
[   87.156541] thermal thermal_zone5: failed to read out thermal zone (-19)
[   89.676338] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[   89.676362] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[   89.676458] ACPI Error: Aborting method \_TZ.GTTP due to previous error (AE_TIME) (20230331/psparse-529)
[   89.676482] ACPI Error: Aborting method \_TZ.SK1Z._TMP due to previous error (AE_TIME) (20230331/psparse-529)
[   89.676509] thermal thermal_zone6: failed to read out thermal zone (-19)
[   92.196319] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[   92.196344] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[   92.196385] ACPI Error: Aborting method \_TZ.GTTP due to previous error (AE_TIME) (20230331/psparse-529)
[   92.196409] ACPI Error: Aborting method \_TZ.SK2Z._TMP due to previous error (AE_TIME) (20230331/psparse-529)
[   92.196436] thermal thermal_zone7: failed to read out thermal zone (-19)
[   94.719609] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[   94.719635] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[   94.719731] ACPI Error: Aborting method \_TZ.GTTP due to previous error (AE_TIME) (20230331/psparse-529)
[   94.719755] ACPI Error: Aborting method \_TZ.PCHZ._TMP due to previous error (AE_TIME) (20230331/psparse-529)
[   94.719783] thermal thermal_zone9: failed to read out thermal zone (-19)
[   97.242906] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[   97.242931] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[   97.242976] ACPI Error: Aborting method \_TZ.GTTP due to previous error (AE_TIME) (20230331/psparse-529)
[   97.243001] ACPI Error: Aborting method \_TZ.EXTZ._TMP due to previous error (AE_TIME) (20230331/psparse-529)
[   97.243017] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.SEN1._TMP due to previous error (AE_TIME) (20230331/psparse-529)
[   97.243044] thermal thermal_zone11: failed to read out thermal zone (-5)
[   99.762926] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[   99.762961] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[   99.763028] ACPI Error: Aborting method \_TZ.GTTP due to previous error (AE_TIME) (20230331/psparse-529)
[   99.763069] ACPI Error: Aborting method \_TZ.LOCZ._TMP due to previous error (AE_TIME) (20230331/psparse-529)
[   99.763095] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.SEN2._TMP due to previous error (AE_TIME) (20230331/psparse-529)
[   99.763142] thermal thermal_zone12: failed to read out thermal zone (-5)
[  102.299263] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  102.299270] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  102.299305] ACPI Error: Aborting method \_TZ.GTTP due to previous error (AE_TIME) (20230331/psparse-529)
[  102.299314] ACPI Error: Aborting method \_TZ.SK1Z._TMP due to previous error (AE_TIME) (20230331/psparse-529)
[  102.299319] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.SEN6._TMP due to previous error (AE_TIME) (20230331/psparse-529)
[  102.299328] thermal thermal_zone13: failed to read out thermal zone (-5)
[  104.806316] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  104.806350] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  104.806423] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  104.806462] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  104.806488] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  104.940209] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[  107.361391] i8042: Can't read CTR while initializing i8042
[  107.361396] i8042: probe of i8042 failed with error -5
[  107.446703] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
[  109.419037] iosm 0000:57:00.0: msg timeout
[  109.892895] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  109.892922] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  109.893021] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  109.893048] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  109.893064] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  109.925739] iosm 0000:57:00.0: msg timeout
[  110.432971] iosm 0000:57:00.0: msg timeout
[  110.938799] iosm 0000:57:00.0: msg timeout
[  112.396214] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  112.396242] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  112.396342] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  112.396368] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  112.396383] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  114.899257] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  114.899292] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  114.899365] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  114.899403] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  114.899429] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  117.399613] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  117.399648] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  117.399722] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  117.399760] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  117.399786] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  119.902897] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  119.902935] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  119.903008] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  119.903046] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  119.903069] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  122.402832] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  122.402861] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  122.402960] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  122.402987] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  122.403003] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  124.902902] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  124.902938] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  124.903010] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  124.903048] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  124.903071] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  127.406208] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  127.406242] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  127.406320] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  127.406359] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  127.406385] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  129.818991] iosm 0000:57:00.0: msg timeout
[  129.912880] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  129.912915] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  129.912991] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  129.913030] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  129.913055] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  130.326239] iosm 0000:57:00.0: msg timeout
[  131.339680] iosm 0000:57:00.0: msg timeout
[  131.845658] iosm 0000:57:00.0: msg timeout
[  132.416233] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  132.416273] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  132.416350] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  132.416388] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  132.416414] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  134.922920] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  134.922954] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  134.923097] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  134.923135] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  134.923159] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  135.346447] cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: Wake failed, re-enter hibernate: -42
[  135.478860] cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: Wake failed, re-enter hibernate: -42
[  135.613191] cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: Wake failed, re-enter hibernate: -42
[  135.745728] cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: Wake failed, re-enter hibernate: -42
[  135.879702] cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: Wake failed, re-enter hibernate: -42
[  135.880307] cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: Timed out waking device
[  135.880308] cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: Unable to exit Hibernate.
[  136.021554] cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Wake failed, re-enter hibernate: -42
[  136.172917] cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Wake failed, re-enter hibernate: -42
[  136.324260] cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Wake failed, re-enter hibernate: -42
[  136.478372] cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Wake failed, re-enter hibernate: -42
[  136.635186] cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Wake failed, re-enter hibernate: -42
[  136.636596] cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Timed out waking device
[  136.636603] cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Unable to exit Hibernate.
[  136.703210] cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: Failed to set mailbox cmd 1 (status 0)
[  136.710516] cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Failed to set mailbox cmd 1 (status 0)
[  137.436254] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  137.436288] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  137.436364] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  137.436402] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  137.436428] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  139.936263] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  139.936307] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  139.936384] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  139.936426] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  139.936454] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  141.888368] cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: Failed to set mailbox cmd 1 (status 0)
[  141.896529] cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Failed to set mailbox cmd 1 (status 0)
[  142.442878] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  142.442905] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  142.442955] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  142.442982] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  142.442997] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  144.942933] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  144.942968] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  144.943044] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  144.943083] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  144.943108] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  147.446148] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  147.446174] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  147.446223] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  147.446250] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  147.446264] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  149.949479] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  149.949506] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  149.949603] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  149.949629] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  149.949643] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  152.459507] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  152.459543] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  152.459621] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  152.459660] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  152.459685] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  154.969543] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  154.969582] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  154.969656] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  154.969693] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  154.969718] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  157.469547] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  157.469581] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  157.469652] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  157.469692] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  157.469717] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  159.979541] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  159.979578] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  159.979654] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  159.979692] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  159.979718] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  162.482870] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  162.482906] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  162.482980] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  162.483017] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  162.483041] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  189.979530] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  189.979569] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  189.979644] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  189.979683] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  189.979710] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  192.489127] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  192.489134] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  192.489151] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  192.489159] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  192.489164] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  194.992888] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  194.992931] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  194.993002] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  194.993041] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  194.993066] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  197.496160] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  197.496186] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  197.496285] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  197.496310] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  197.496327] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  199.999520] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  199.999556] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  199.999632] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  199.999671] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  199.999697] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  202.505722] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  202.505728] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  202.505743] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  202.505751] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  202.505755] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  204.805950] warning: `ThreadPoolForeg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[  205.011988] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  205.011994] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  205.012009] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  205.012015] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  205.012019] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  207.521964] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  207.521980] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  207.522018] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  207.522037] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  207.522050] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  210.034989] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  210.034996] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  210.035015] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  210.035022] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  210.035026] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  212.544816] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  212.544826] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  212.544848] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  212.544858] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  212.544868] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  215.054540] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  215.054547] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  215.054563] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  215.054569] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  215.054574] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  217.564336] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  217.564342] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  217.564359] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  217.564366] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  217.564370] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  220.074401] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  220.074421] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  220.074466] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  220.074489] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  220.074503] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)
[  222.580796] ACPI Error: AE_TIME, Returned by Handler for [EmbeddedControl] (20230331/evregion-300)
[  222.580803] ACPI Error: Timeout from EC hardware or EC device driver (20230331/evregion-310)
[  222.580820] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  222.580828] ACPI Error: Aborting method \_SB.BTST due to previous error (AE_TIME) (20230331/psparse-529)
[  222.580832] ACPI Error: Aborting method \_SB.BAT0._BST due to previous error (AE_TIME) (20230331/psparse-529)

@brahma

you can try the following kernel parameter which works with hp 845, and see if it works:
iommu=pt

Nothing changes.

@megavolt

Before fiddling here… could you test if suspend-to-ram (S3) (linux: deep) works on Windows? Since this laptop has only support for Windows it would be a better idea to test first there. If only suspend-to-idle (S0) (linux: s2idle) works, then there is actually no chance to use S3. Some Vendors already removed S3 completely from the firmware, not only hiding it. And the errors could be a sign of it.

Also I was able to test deep sleep with bootable windows 10 pendrive and it also didn’t work there, however in win10 the screen didn’t work and becasue of that I had to hard reset the pc to do anything.
This leads me to belive that the deep sleep isn’t supported by the manufacturer so I feel that using s2 might be the better opion becasue it worked fine on windows.

However the problem is that s2 also doesn’t work as after wakeup the keyboard backlight is working (unlike deep) and the fans are spinning but the screen is black.

[brahma]

also you can try this kernel parameter:
acpi=copy_dsdt
it should help when the dsdt table is corrupted…

[Siema]

Nothing changed, keyboard was still broken.
I also extracted and tried to compile the dsdt table and got the same errors as before.

I’ll close this thread, as so far its going nowhere, with the assumption that my laptop simply does not support deep sleep but advertises it as explained in archwiki

3. Changing suspend method
   In some opposite situations, faulty firmware advertises support for deep sleep, while only s2idle is supported.

https://wiki.archlinux.org/title/Power_management/Suspend_and_hibernate

Thank you for your help and sorry for waisting your time.