Strange, so you normally never see this SDDM Login Menue but it shows up right after the Update?
If you are using a special theme style for SDDM, maybe change it to a default theme.
Strange, so you normally never see this SDDM Login Menue but it shows up right after the Update?
If you are using a special theme style for SDDM, maybe change it to a default theme.
The correct procedure to uninstall Plymouth can be found in the Manjaro Wiki Plymouth article, under the heading of REMOVAL.
It’s more involved than typical package removal, but not difficult.
Update on my situation: Running sudo update-grub
fixed the missing Grub theme. So if anyone else got this one try simply running that and it should do it.
systemd-homed
comes preinstalled in Arch and derivatives, but its configuration is essentially blank, apart from listing its “factory defaults”, and it is not enabled.
The reason for this is that most people don’t have a need for systemd-homed
. For one, it breaks too many things — such as remote login over ssh
— because it uses dynamic user IDs that are created on the fly. It is specifically intended for people who keep their entire /home
on a removable storage device, and who carry this storage device around with them for use across multiple different computers, such as in an office setting where people have to use different desktop computers depending on what cubicle will be available to them, or people who wish to take their entire $HOME
with them after office hours to continue working at home, but who are not using a laptop.
Personally, I have it masked.
Had to boot machine twice before getting the login prompt.
Hope can boot the next time.
I have been seeing the issue described in After 2023-12-01 I can not get in to a timed out session - the issue persists in the latest update. I have resolved it by manually installing version 535.146.02 of the Nvidia drivers (using the .run file they provide on their website).
My boot partition is only 200MB big, im actually only use Kernel 6.1LTS and i use 120MB from 190MB (real space)…
Will i run into issue, when i enlarge my Boot Partition while in a life boot environment? Im using MBR btw.
Hello there, I ran into the same issue after the update with Plasma X11. But I managed to drill down and fix the issue. You might possibly be facing the same case. I mentioned it here:
I updated with Pamac. It showed a popup asking to to choose (I guess dbus-broker), but there is nothing for me really to choose, I just had to press the “Choose” button, then it prompted me about three new packages to be installed. The upgrade went smoothly, and the reboot had no problem.
After reboot, I see my kernel is still 6.1.71. 6.6.10 is recommended but it’s not upgraded automatically? Should I upgrade to that manually?
LUKS user here. I haven’t installed 6.7 yet, but I have experienced the problem of a limited /boot size on Ubuntu, which has been creating massive initramfs’s for years now, and every solution is painful.
However, my Manjaro install doesn’t seem to be vulnerable. Look at the output of ‘df -h’, it appears that on my system /boot/efi only points to the partition with the limited size, /boot is just on the main [encrpyted] disk. As the initramfs’s are stord in /boot there should not be a problem.
This is probably something to do with why I have 2 key slots used, one for me, and one for a keyfile /crypto_keyfile.bin autogenerated by the installer.
@philm, does this update change anything about gpu hardware acceleration? I told you this because after the update, Brave browser and Chromium show strange artifacts on screen while browsing as I shown before in this thread:
Even appear weird images as seen here:
Disabling hardware acceleration in browser (Settings → Systems → Disable hardware acceleration when available) the problems disappear.
And Videolan VLC before the update played AVI (xvid codec) or MKV (264 or 265 codec) files without problem. Hardware acceleration was set in “Auto”. After the update plays MKV files but not AVI, there’s sound but only a black screen.
Disabling hardware acceleration in Tools → Preferences → Input & Codecs → Codecs → Hardware-accelerated decoding plays AVI files again.
And seems I’m not the only one with this issue:
All this happen after the update. Brave, Chromium or VLC weren’t updated, so must be caused by another package. If I restore the timeshift snapshot made before the update, browsers work without problems and VLC plays all files as usual.
Graphics:
Device-1: AMD Caicos PRO [Radeon HD 7450] driver: radeon v: kernel
Display: x11 server: X.Org v: 21.1.10 driver: X: loaded: radeon
unloaded: modesetting dri: r600 gpu: radeon resolution: 1920x1080~60Hz
API: EGL v: 1.5 drivers: kms_swrast,r600,swrast
platforms: gbm,x11,surfaceless,device
API: OpenGL v: 4.5 vendor: mesa v: 23.1.9-manjaro1.1 renderer: AMD CAICOS
(DRM 2.50.0 / 6.6.10-1-MANJARO LLVM 16.0.6)
API: Vulkan Message: No Vulkan data available.
> 0000:01:00.0 (0300:1002:677b) Display controller ATI Technologies Inc:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-linux 2018.05.04 true PCI
video-modesetting 2020.01.13 true PCI
video-vesa 2017.03.12 true PCI
> 0000:04:00.0 (0200:10ec:8168) Network controller Realtek Semiconductor Co., Ltd.:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
network-r8168 2023.09.12 true PCI
I restored again the timeshift snapshot made before the update and worked fine again. Repeated the update choosing dbus-daemon instead of dbus-broker (only for testing) but the artifacts reappear.
Copying data from USB stick via dolphin to the system is also very slow …
I guess there is a problem with the new kernel, I’ll test the LTS straight away also because of the shutdown issue.
Yes, the issue with copying from usb stick is caused by the new kernel, the problem does not occur with 6.6.10.
The shutdown problem is probably caused by a systemd thing …
Worked for me as well. On my side dual-boot was broken as well, but sudo grub-mkconfig fixed that too.
You’re right. I restored again the timeshift snapshot from before the update, repeat all the update except these ten packages and after the reboot had no problem, no artifacts, VLC plays AVI again.
lib32-libva-mesa-driver-1:23.3.3-1
lib32-mesa-1:23.3.3-1
lib32-mesa-vdpau-1:23.3.3-1
lib32-vulkan-intel-1:23.3.3-1
lib32-vulkan-radeon-1:23.3.3-1
libva-mesa-driver-1:23.3.3-1
mesa-1:23.3.3-1
mesa-vdpau-1:23.3.3-1
vulkan-intel-1:23.3.3-1
vulkan-radeon-1:23.3.3-1
So I’ll include these packages in IgnorePkg from pacman.conf and wait for the next mesa release to see if works well. Thanks!
You could do that. See Manjaro Kernels.
Or, if kernel 6.6.10 was actually installed, you might just need to select it from the Grub boot menu.
There is weird issue when saving files from web browsers (firefox, chrome) on smb share… files are corrupted or fail when saving. I don’t see such issues outside web browsers for now. Also there are no problems with nfs shares or local disks.
Hi,
After the update, the reboot was ok. Just a little issue: after few second any icons disappeared in the desktop. The background image is like before the update, at the moment any programs works well…but no icon (trash bin, shortcut to programs, files) are presents. My desktop is completely empty.
Below some details, that I hope could help you to help me.
Thank’s in advance.
inxi -v7azy
System:
Kernel: 6.6.10-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64
root=UUID=f25908b5-1f7f-457d-b5af-7d47c201faf8 rw quiet splash apparmor=1
security=apparmor udev.log_priority=3 ibt=off
resume=/dev/disk/by-uuid/92a30798-9f6e-4f81-a5f8-f72c784e1019
Desktop: GNOME v: 45.3 tk: GTK v: 3.24.39 wm: gnome-shell dm: GDM v: 45.0.1
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: PCSpecialist product: Standard v: Standard
serial: <superuser required>
Mobo: TongFang model: GM7AG0P v: Standard serial: <superuser required>
UEFI: American Megatrends LLC. v: N.1.05A04 date: 02/25/2022
Battery:
ID-1: BAT0 charge: 65.0 Wh (100.0%) condition: 65.0/91.6 Wh (70.9%)
volts: 12.5 min: 11.6 model: standard type: Li-ion serial: <filter>
status: full
Memory:
System RAM: total: 64 GiB note: est. available: 62.54 GiB
used: 4.98 GiB (8.0%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: 12th Gen Intel Core i7-12700H bits: 64 type: MST AMCP
arch: Alder Lake gen: core 12 level: v3 note: check built: 2021+
process: Intel 7 (10nm ESF) family: 6 model-id: 0x9A (154) stepping: 3
microcode: 0x430
Topology: cpus: 1x cores: 14 mt: 6 tpc: 2 st: 8 threads: 20 smt: enabled
cache: L1: 1.2 MiB desc: d-8x32 KiB, 6x48 KiB; i-6x32 KiB, 8x64 KiB
L2: 11.5 MiB desc: 6x1.2 MiB, 2x2 MiB L3: 24 MiB desc: 1x24 MiB
Speed (MHz): avg: 424 high: 882 min/max: 400/4600:4700:3500 scaling:
driver: intel_pstate governor: powersave cores: 1: 400 2: 400 3: 400 4: 400
5: 400 6: 400 7: 400 8: 400 9: 400 10: 400 11: 400 12: 400 13: 400 14: 400
15: 400 16: 400 17: 400 18: 882 19: 400 20: 400 bogomips: 107560
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
arch_capabilities arch_lbr arch_perfmon art avx avx2 avx_vnni bmi1 bmi2
bts cat_l2 cdp_l2 clflush clflushopt clwb cmov constant_tsc cpuid
cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est
f16c flexpriority flush_l1d fma fpu fsgsbase fsrm fxsr gfni hfi ht hwp
hwp_act_window hwp_epp hwp_notify hwp_pkg_req ibpb ibrs ibrs_enhanced ida
intel_pt invpcid lahf_lm lm mca mce md_clear mmx monitor movbe movdir64b
movdiri msr mtrr nonstop_tsc nopl nx ospke pae pat pbe pclmulqdq pdcm
pdpe1gb pebs pge pku pln pni popcnt pse pse36 pts rdpid rdrand rdseed
rdt_a rdtscp rep_good sdbg sep serialize sha_ni smap smep smx
split_lock_detect ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm
tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer tsc_known_freq umip
user_shstk vaes vme vmx vnmi vpclmulqdq vpid waitpkg x2apic xgetbv1 xsave
xsavec xsaveopt xsaves xtopology xtpr
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Enhanced / Automatic IBRS, IBPB: conditional,
RSB filling, PBRSB-eIBRS: SW sequence
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Alder Lake-P GT2 [Iris Xe Graphics] vendor: Tongfang Hongkong
driver: i915 v: kernel arch: Gen-12.2 process: Intel 10nm built: 2021-22+
ports: active: eDP-1 empty: DP-1,DP-2 bus-ID: 00:02.0 chip-ID: 8086:46a6
class-ID: 0300
Device-2: NVIDIA GA106M [GeForce RTX 3060 Mobile / Max-Q]
vendor: Tongfang Hongkong driver: nvidia v: 545.29.06
alternate: nouveau,nvidia_drm non-free: 545.xx+ status: current (as of
2023-11; EOL~2026-12-xx) arch: Ampere code: GAxxx process: TSMC n7 (7nm)
built: 2020-2023 pcie: gen: 1 speed: 2.5 GT/s lanes: 8 link-max: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 01:00.0 chip-ID: 10de:2520 class-ID: 0300
Device-3: Chicony FHD Webcam driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-5:2 chip-ID: 04f2:b75c
class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 21.1.10 with: Xwayland v: 23.2.3
compositor: gnome-shell driver: X: loaded: modesetting,nvidia
alternate: fbdev,nouveau,nv,vesa dri: iris gpu: i915 display-ID: :1
screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00")
s-diag: 777mm (30.58")
Monitor-1: eDP-1 model: BOE Display 0x0a8f built: 2021 res: 2560x1440
dpi: 171 gamma: 1.2 size: 381x214mm (15x8.43") diag: 437mm (17.2")
ratio: 16:9 modes: 2560x1440
API: EGL v: 1.5 hw: drv: intel iris drv: nvidia platforms: device: 0
drv: nvidia device: 2 drv: iris device: 3 drv: swrast gbm: drv: nvidia
surfaceless: drv: nvidia x11: drv: iris inactive: wayland,device-1
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: intel mesa v: 23.3.3-manjaro1.1
glx-v: 1.4 direct-render: yes renderer: Mesa Intel Graphics (ADL GT2)
device-ID: 8086:46a6 memory: 61.08 GiB unified: yes
Audio:
Device-1: Intel Alder Lake PCH-P High Definition Audio
vendor: Tongfang Hongkong driver: snd_hda_intel v: kernel
alternate: snd_sof_pci_intel_tgl bus-ID: 00:1f.3 chip-ID: 8086:51c8
class-ID: 0403
Device-2: NVIDIA GA106 High Definition Audio vendor: Tongfang Hongkong
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 8
link-max: lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:228e class-ID: 0403
API: ALSA v: k6.6.10-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 1.0.0 status: off tools: pw-cli
Server-3: PulseAudio v: 16.1 status: active with: pulseaudio-alsa
type: plugin tools: pacat,pactl,pavucontrol
Network:
Device-1: Intel Wi-Fi 6 AX210/AX211/AX411 160MHz driver: iwlwifi v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 2e:00.0 chip-ID: 8086:2725
class-ID: 0280
IF: wlp46s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
Device-2: Realtek RTL8125 2.5GbE vendor: Tongfang Hongkong driver: r8169
v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 port: 3000 bus-ID: 2f:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: enp47s0 state: down mac: <filter>
IF-ID-1: vmnet20 state: unknown speed: N/A duplex: N/A mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> virtual: proto kernel_ll scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX210 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-10:5 chip-ID: 8087:0032
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.3
lmp-v: 12 status: discoverable: no pairing: yes class-ID: 7c010c
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 3.64 TiB used: 2.25 TiB (61.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 PRO 2TB
size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: 3B2QGXA7 temp: 31.9 C
scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:1 vendor: Samsung
model: SSD 970 EVO Plus 2TB size: 1.82 TiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 4B2QEXM7 temp: 29.9 C scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 195.18 GiB size: 191.05 GiB (97.89%)
used: 76.22 GiB (39.9%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:3
label: N/A uuid: f25908b5-1f7f-457d-b5af-7d47c201faf8
ID-2: /boot/efi raw-size: 400 MiB size: 399.2 MiB (99.80%)
used: 456 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:2 label: N/A
uuid: 631A-EA79
ID-3: /mnt/dati_pc raw-size: 1.82 TiB size: 1.79 TiB (98.37%)
used: 1.21 TiB (67.9%) fs: ext4 dev: /dev/nvme1n1p1 maj-min: 259:6 label: N/A
uuid: 93d14898-6e42-4881-af15-e40434393393
ID-4: /mnt/vm raw-size: 1.56 TiB size: 1.54 TiB (98.36%)
used: 979.26 GiB (62.2%) fs: ext4 dev: /dev/nvme0n1p3 maj-min: 259:4
label: N/A uuid: ec5f18a6-18df-4439-9075-ec61ba2791ae
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes
compressor: zstd max-pool: 20%
ID-1: swap-1 type: partition size: 67.05 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p4 maj-min: 259:5 label: N/A
uuid: 92a30798-9f6e-4f81-a5f8-f72c784e1019
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.1
speed: 20 Gb/s (2.33 GiB/s) lanes: 2 mode: 3.2 gen-2x2 chip-ID: 1d6b:0003
class-ID: 0900
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 3-5:2 info: Chicony FHD Webcam type: video driver: uvcvideo
interfaces: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0
power: 500mA chip-ID: 04f2:b75c class-ID: 0e02 serial: <filter>
Device-2: 3-6:3 info: Integrated Express ITE Device(8291)
type: keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
chip-ID: 048d:6005 class-ID: 0300
Device-3: 3-8:4 info: Integrated Express ITE Device(8291)
type: keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
chip-ID: 048d:ce00 class-ID: 0300
Device-4: 3-10:5 info: Intel AX210 Bluetooth type: bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
power: 100mA chip-ID: 8087:0032 class-ID: e001
Hub-4: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Device-1: 4-4:2 info: Realtek Card Reader type: mass storage
driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s)
lanes: 1 mode: 3.2 gen-1x1 power: 800mA chip-ID: 0bda:0316 class-ID: 0806
serial: <filter>
Sensors:
System Temperatures: cpu: 47.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Processes: 436 Uptime: 57m wakeups: 0 Init: systemd v: 255 default: graphical
tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6 Packages: 1692
pm: pacman pkgs: 1664 libs: 380 tools: gnome-software,pamac,yay pm: flatpak
pkgs: 17 pm: snap pkgs: 11 Shell: Zsh v: 5.9 running-in: gnome-terminal
inxi: 3.3.31
journalctl --boot=-1 --priority=3 --catalog --no-pager
gen 14 11:58:57 davide kernel: proc_thermal_pci 0000:00:04.0: error: proc_thermal_add, will continue
gen 14 11:58:58 davide kernel:
gen 14 11:58:58 davide kernel: usbhid 3-6:1.0: couldn't find an input interrupt endpoint
gen 14 11:58:58 davide kernel: usbhid 3-8:1.0: couldn't find an input interrupt endpoint
gen 14 11:58:58 davide kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 545.29.06 Thu Nov 16 01:59:08 UTC 2023
gen 14 11:58:58 davide kernel: Bluetooth: hci0: No support for _PRR ACPI method
gen 14 11:58:58 davide kernel: iwlwifi 0000:2e:00.0: WRT: Invalid buffer destination
gen 14 11:58:59 davide kernel: iwlwifi 0000:2e:00.0: WRT: Invalid buffer destination
gen 14 11:58:59 davide kernel: iwlwifi 0000:2e:00.0: WRT: Invalid buffer destination
gen 14 11:59:00 davide systemd[1]: Failed to start pkgfile database update.
░░ Subject: A start job for unit pkgfile-update.service has failed
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░
░░ A start job for unit pkgfile-update.service has finished with a failure.
░░
░░ The job identifier is 1259 and the job result is failed.
gen 14 11:59:06 davide dbus-broker-launch[1896]: Ignoring duplicate name 'org.freedesktop.FileManager1' in service file '/usr/share//dbus-1/services/org.freedesktop.FileManager1.service'
░░ Subject: Invalid service file
░░ Defined-By: dbus-broker
░░ Support: https://groups.google.com/forum/#!forum/bus1-devel
░░
░░ A service file is a ini-type configuration file.
░░
░░ It has one required section
░░ named [D-BUS Service]. The section contains the required key 'Name', which
░░ must be a valid D-Bus name that is unique across all service files. It also
░░ contains at least one of the two optional keys 'SystemdService' and 'Exec',
░░ as well as optionally the key 'User'. Exec must be a valid shell command and
░░ User must be a valid user on the system.
░░
░░ A service file should be named after the D-Bus name it configures. That is
░░ a file containing Name=org.foo.bar1 should be named org.foo.bar1.service.
░░ For backwards compatibility, we only warn when files do not follow this
░░ convention when run as a user bus. The system bus considers this an error
░░ and ignores the service file.
gen 14 11:59:23 davide gdm-password][2491]: gkr-pam: unable to locate daemon control file
gen 14 11:59:23 davide dbus-broker-launch[2527]: Ignoring duplicate name 'org.freedesktop.FileManager1' in service file '/usr/share//dbus-1/services/org.freedesktop.FileManager1.service'
░░ Subject: Invalid service file
░░ Defined-By: dbus-broker
░░ Support: https://groups.google.com/forum/#!forum/bus1-devel
░░
░░ A service file is a ini-type configuration file.
░░
░░ It has one required section
░░ named [D-BUS Service]. The section contains the required key 'Name', which
░░ must be a valid D-Bus name that is unique across all service files. It also
░░ contains at least one of the two optional keys 'SystemdService' and 'Exec',
░░ as well as optionally the key 'User'. Exec must be a valid shell command and
░░ User must be a valid user on the system.
░░
░░ A service file should be named after the D-Bus name it configures. That is
░░ a file containing Name=org.foo.bar1 should be named org.foo.bar1.service.
░░ For backwards compatibility, we only warn when files do not follow this
░░ convention when run as a user bus. The system bus considers this an error
░░ and ignores the service file.
gen 14 11:59:24 davide systemd[2499]: Failed to start Application launched by gnome-session-binary.
░░ Subject: A start job for unit UNIT has failed
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░
░░ A start job for unit UNIT has finished with a failure.
░░
░░ The job identifier is 192 and the job result is failed.
gen 14 12:00:56 davide pulseaudio[2968]: Lost I/O connection in module "module-gsettings"
gen 14 12:00:59 davide dbus-broker-launch[4447]: Ignoring duplicate name 'org.freedesktop.FileManager1' in service file '/usr/share//dbus-1/services/org.freedesktop.FileManager1.service'
░░ Subject: Invalid service file
░░ Defined-By: dbus-broker
░░ Support: https://groups.google.com/forum/#!forum/bus1-devel
░░
░░ A service file is a ini-type configuration file.
░░
░░ It has one required section
░░ named [D-BUS Service]. The section contains the required key 'Name', which
░░ must be a valid D-Bus name that is unique across all service files. It also
░░ contains at least one of the two optional keys 'SystemdService' and 'Exec',
░░ as well as optionally the key 'User'. Exec must be a valid shell command and
░░ User must be a valid user on the system.
░░
░░ A service file should be named after the D-Bus name it configures. That is
░░ a file containing Name=org.foo.bar1 should be named org.foo.bar1.service.
░░ For backwards compatibility, we only warn when files do not follow this
░░ convention when run as a user bus. The system bus considers this an error
░░ and ignores the service file.
gen 14 12:01:04 davide gdm-password][4838]: gkr-pam: unable to locate daemon control file
gen 14 12:01:04 davide dbus-broker-launch[4861]: Ignoring duplicate name 'org.freedesktop.FileManager1' in service file '/usr/share//dbus-1/services/org.freedesktop.FileManager1.service'
░░ Subject: Invalid service file
░░ Defined-By: dbus-broker
░░ Support: https://groups.google.com/forum/#!forum/bus1-devel
░░
░░ A service file is a ini-type configuration file.
░░
░░ It has one required section
░░ named [D-BUS Service]. The section contains the required key 'Name', which
░░ must be a valid D-Bus name that is unique across all service files. It also
░░ contains at least one of the two optional keys 'SystemdService' and 'Exec',
░░ as well as optionally the key 'User'. Exec must be a valid shell command and
░░ User must be a valid user on the system.
░░
░░ A service file should be named after the D-Bus name it configures. That is
░░ a file containing Name=org.foo.bar1 should be named org.foo.bar1.service.
░░ For backwards compatibility, we only warn when files do not follow this
░░ convention when run as a user bus. The system bus considers this an error
░░ and ignores the service file.
gen 14 12:01:05 davide systemd[2499]: Failed to start Application launched by gnome-session-binary.
░░ Subject: A start job for unit UNIT has failed
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░
░░ A start job for unit UNIT has finished with a failure.
░░
░░ The job identifier is 1256 and the job result is failed.