Hi,
pamac is clearly more reactive than before but we must click on a package to see details in the main window.
Before it show the selected package details in a right panel and I found it much better.
Is it possible for Manjaro Team to make some change or do I need to put an upstream request for it?
Wish You well
No, the pamac behaviour is better now. There is no right panel until you select a package. That makes more sense.
This is anyway not the channel for this discussion. a Better place would be the Feedback category, in my opinion.
Also, even though I don’t use the pamac GUI, I do agree with @ara.
No internet at all on 6.6.5 or 5.1.5.
edit: it’s back.
There is still the older UI as pamac-gtk3. pamac-gtk however follows latest Gnome standards.
Session locking and switching is still broken on XFCE with 545 Nvidia drivers,
I’d like to try and isolate what causes it, would anyone know the best way to switch to the 535 driver (if those are supported by manjaro)?
Edit:
other threads for reference
Xfce4 black screen with cursor when switching between users
After 2023-12-01 I can not get in to a timed out session
I updated today and had this message at the end:
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: '/boot/initramfs-5.10-x86_64-fallback.img'
==> WARNING: errors were encountered during the build. The image may not be complete.
error: command failed to execute correctly
(5/9) Reloading system bus configuration...
(6/9) Warn about old perl modules
(7/9) Updating icon theme caches...
(8/9) Looking for Pacnew/Pacsave created.
(9/9) Updating the desktop file MIME type cache...
I am not really clear what the issue is…everything seems to be working as normal. Any ideas?
@ whutch1
Before rebooting, be sure to have another kernel, like a LTS one : 6.1 or 6.6. This error occurred with one of the last update that you probably skipped, and concerns kernels 5.10 & 5.15, but no idea for the initial cause has been produced and no patch either !
I see. I have some older kernels installed and I noticed this was only an issue for 5.10. So I guess I will install a newer kernel before I reboot. Thanks!
Thank you for the update.
Just a minor annyoance.
I noticed that I can’t access folders named “?” anywhere in the folder name in Dolphin (I’m on KDE Plasma and still waiting for a Powerdevil fix solution on their side). No issue doing so in Nemo.
Dolphin shows the thumbnails that are contained in the folder however and can create folders named “?”. Probably should report it.
I made that folder sorting old stuff just before this and the update before, so beg. of Dec. Hence I’m certain that it had worked then.
The Kernel of the Beast appears to have solved the little problem the previous version brought, about not shutting down… as planned.
Very neat work, and I commend your speed, dear ladies and gentlemen. On certain proprietary OSs I’ve tried, this would have taken longer than at least my laptop has to live.
That’s a long time problem for folders and files using Windows formats, NTFS, FAT etc So I just avoid using “?” in names
Is anyone else experiencing X11 crashes on moving the desktop discord program from one monitor to a second monitor ?
System:
Kernel: 6.6.6-2-MANJARO arch: x86_64 bits: 64 Desktop: Xfce v: 4.18.1
Distro: Manjaro Linux
CPU:
Info: 2x 6-core Intel Xeon X5675 [MT MCP SMP] speed (MHz): avg: 1657
min/max: 1596/3060
Graphics:
Device-1: NVIDIA GA102GL [RTX A4500] driver: nvidia v: 545.29.06
Display: x11 server: X.Org v: 21.1.9 driver: X:
loaded: modesetting,nouveau,nvidia gpu: nvidia resolution: 1: 1680x1050~60Hz
2: 1280x1024~60Hz 3: N/A
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 545.29.06
renderer: NVIDIA RTX A4500/PCIe/SSE2
Drives:
Local Storage: total: 3.78 TiB used: 1.56 TiB (41.3%)
Info:
Processes: 394 Uptime: 19m Memory: total: 96 GiB note: est.
available: 94.37 GiB used: 2.99 GiB (3.2%) Shell: Bash inxi: 3.3.31
EDIT: seems related to things being broken on XFCE with the 545 drivers, openbox or Cinnamon do no seem to have this problem, and replacing xfwm by openbox on XFCE maker the bug no longer happen
I had the same problem with my previous 2 updates, and I have removed 5.10 LTS and 5.15 LTS.
Now I have only 6.1 LTS and 6.6 LTS and everything is ok, without errors.
Regarding, mkinitcpio error message, with hook kms and kernel 5.10, it seems, at this time, to be reporting an error when it probably should be a warning. Testing, if I remove kms from the mkinitcpio.conf HOOKS, the error message does not appear. I captured the verbose output of mkinitcpio, but nothing jumps out as what might be missing. At this time, I’m just ignoring the error message on kernel 5.10.
This archlinux entry, "SOLVED: mkinitcpio exits with code 1 after upgrade from 36 to 37", describes the issue and points to bug report.
Kernel 5.10 doesn’t EOL until 12/2026.
The issue was probably introduced with the upgrade of mkinitcpio to 37 on the 2023-11-21 Stable Update.
A minor problem after the latest upgrade on my xfce-installation:
upgrade of xfce4-power-manager (4.18.2-1 → 4.18.3-1) stopped the ability to switch off the display of my laptop by mouse-scrolling in the panel. Downgrading fixed it.
Linux 6.6.X and nouveau not working on NVIDIA 210.
As i mentioned 2 Threads ago, Linux 6.6.x no longer works on my system with nouveau drivers and nvidia Geforce 218. Kernel 6.1.67-2 still works:
[ 21.597130] nouveau 0000:01:00.0: vgaarb: deactivate vga console
[ 21.597167] nouveau 0000:01:00.0: NVIDIA GT218 (0a8280b1)
[ 21.605204] intel_powerclamp: No package C-state available
[ 21.717858] nouveau 0000:01:00.0: bios: version 70.18.a6.00.00
[ 21.719738] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[ 22.822886] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[ 22.822892] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 22.822896] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 22.822898] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 22.822900] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030
[ 22.822903] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000
[ 22.822905] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011362 00020010
[ 22.822907] nouveau 0000:01:00.0: DRM: DCB outp 03: 01022310 00000000
[ 22.822909] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[ 22.822911] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
[ 22.822913] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
[ 22.825102] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 22.872098] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x70000, bo 00000000d8b34fcf
[ 22.874071] fbcon: nouveaudrmfb (fb0) is primary device
[ 22.963371] Console: switching to colour frame buffer device 240x67
[ 22.965707] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[ 22.980563] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 23.200295] EXT4-fs (sda3): mounted filesystem with ordered data mode. Quota mode: none.
[ 24.480714] RPC: Registered named UNIX socket transport module.
[ 24.480721] RPC: Registered udp transport module.
[ 24.480722] RPC: Registered tcp transport module.
[ 24.480723] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 26.334808] mousedev: PS/2 mouse device common for all mice
[ 32.413640] NET: Registered PF_QIPCRTR protocol family
[ 32.913729] ATL1E 0000:02:00.0 enp2s0: NIC Link is Up <1000 Mbps Full Duplex>
[ 32.913748] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 88.840916] systemd-journald[231]: /var/log/journal/18af89b33ecf46d9b18af59e9a5e77ce/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[ 89.500501] logitech-hidpp-device 0003:046D:406D.0006: HID++ 4.5 device connected.
On Kernel 6.6.6 it looks like this:
[ 23.484490] nouveau 0000:01:00.0: vgaarb: deactivate vga console
[ 23.484538] nouveau 0000:01:00.0: NVIDIA GT218 (0a8280b1)
[ 23.598926] nouveau 0000:01:00.0: bios: version 70.18.a6.00.00
[ 23.600269] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[ 24.200311] EXT4-fs (sda3): mounted filesystem 98893c76-e211-4a89-9cfb-e108f9f0ee6f r/w with ordered data mode. Quota mode: none.
[ 24.701255] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[ 24.701263] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 24.701267] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 24.701269] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 24.701271] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030
[ 24.701274] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000
[ 24.701276] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011362 00020010
[ 24.701278] nouveau 0000:01:00.0: DRM: DCB outp 03: 01022310 00000000
[ 24.701280] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[ 24.701282] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
[ 24.701283] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
[ 24.703122] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 24.713114] [drm] Initialized nouveau 1.4.0 20120801 for 0000:01:00.0 on minor 0
[ 24.757702] fbcon: nouveaudrmfb (fb0) is primary device
[ 24.845619] Console: switching to colour frame buffer device 240x67
[ 24.852822] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[ 26.578413] RPC: Registered named UNIX socket transport module.
[ 26.578418] RPC: Registered udp transport module.
[ 26.578419] RPC: Registered tcp transport module.
[ 26.578420] RPC: Registered tcp-with-tls transport module.
[ 26.578421] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 28.280165] mousedev: PS/2 mouse device common for all mice
[ 39.203133] NET: Registered PF_QIPCRTR protocol family
[ 39.362684] ATL1E 0000:02:00.0 enp2s0: NIC Link is Up <1000 Mbps Full Duplex>
[ 69.984286] sddm-greeter[984]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[ 77.405521] nouveau 0000:01:00.0: fifo: DMA_PUSHER - ch 4 [sddm-greeter[984]] get 000021e004 put 000021e088 ib_get 00000007 ib_put 00000008 state 800081a4 (err: INVALID_CMD) push 00400040
[ 80.892922] nouveau 0000:01:00.0: fifo: DMA_PUSHER - ch 4 [sddm-greeter[984]] get 000021e008 put 000021e088 ib_get 0000000b ib_put 0000000c state 80000ac8 (err: INVALID_CMD) push 00400040
[ 81.016391] nouveau 0000:01:00.0: fifo: DMA_PUSHER - ch 4 [sddm-greeter[984]] get 000021e090 put 000021f6d8 ib_get 0000000d ib_put 0000000e state 80000000 (err: INVALID_CMD) push 00400040
[ 108.043289] systemd-journald[181]: /var/log/journal/18af89b33ecf46d9b18af59e9a5e77ce/user-1000.journal: Journal file uses a different sequence number ID, rotating.
Nobody have a clue? The last 5 rows are the error i got on 6.6.6.
My system:
System:
Host: rich-pc Kernel: 6.1.67-2-MANJARO arch: x86_64 bits: 64 compiler: gcc
v: 13.2.1 Desktop: KDE Plasma v: 5.27.10 Distro: Manjaro Linux
base: Arch Linux
Machine:
Type: Desktop Mobo: ASUSTeK model: P5Q v: Rev 1.xx
serial: <superuser required> BIOS: American Megatrends v: 2209
date: 03/11/2010
Battery:
Device-1: hidpp_battery_0 model: Logitech MK700
charge: 55% (should be ignored) status: discharging
Device-2: hidpp_battery_1 model: Logitech Marathon Mouse/Performance Plus
M705 charge: 55% (should be ignored) status: discharging
CPU:
Info: dual core model: Intel Core2 Duo E8400 bits: 64 type: MCP arch: Penryn
rev: A cache: L1: 128 KiB L2: 6 MiB
Speed (MHz): avg: 2000 min/max: 2003/3003 cores: 1: 2000 2: 2000
bogomips: 12002
Flags: ht lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx
Graphics:
Device-1: NVIDIA GT218 [GeForce 210] vendor: Micro-Star MSI N210
driver: nouveau v: kernel arch: Tesla bus-ID: 01:00.0 temp: 53.0 C
Display: x11 server: X.Org v: 21.1.9 driver: X: loaded: modesetting
dri: nouveau gpu: nouveau resolution: 1920x1080~60Hz
API: OpenGL v: 4.5 compat-v: 3.3 vendor: mesa v: 23.1.9-manjaro1.1
glx-v: 1.4 direct-render: yes renderer: NVA8
Network:
Device-1: Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet
vendor: ASUSTeK driver: ATL1E v: N/A port: cc00 bus-ID: 02:00.0
IF: enp2s0 state: up speed: 1000 Mbps duplex:
Drives:
Local Storage: total: 931.51 GiB used: 358.59 GiB (38.5%)
ID-1: /dev/sda vendor: Seagate model: ST1000DM003-1ER162 size: 931.51 GiB
Partition:
ID-1: / size: 210.41 GiB used: 60.51 GiB (28.8%) fs: ext4 dev: /dev/sda2
ID-2: /home size: 702.38 GiB used: 298.09 GiB (42.4%) fs: ext4
dev: /dev/sda3
ID-3: swap-1 size: 2 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda1
Info:
Processes: 182 Uptime: 9m Memory: total: 4 GiB available: 3.83 GiB
used: 2.31 GiB (60.4%) Init: systemd Compilers: gcc: 13.2.1 clang: 16.0.6
Packages: 1721 Shell: Bash v: 5.2.21 inxi: 3.3.31
Seeing as it works on 6.1, I’d say don’t worry, as 6.1 will be supported for 10 years:
This still is an issue also after this update.